SY89829UHI - 2:10 2GHz LVPECL Clock Driver | Microchip
MPN: SY89829UHI ✓ 啟用中SY89829UHI 概覽
A clock driver is a timing-interface semiconductor that receives a high-speed differential clock and generates multiple buffered outputs. The SY89829UHI belongs to the clock buffer and driver hierarchy, combining a 2:1 input multiplexer, redundant switchover, internal termination, and differential clock distribution in one device. This integration supports clock redundancy in communication, industrial, and computing systems.
Key features include two independent clock-driver circuits, a 2:10 output ratio per circuit, 2 GHz operating performance, and support for 2.5 V or 3.3 V operation. Internal termination reduces the need for separate termination components when the device is used with compatible LVPECL interfaces. The 2:1 multiplexer allows a system to select between two clock sources for redundancy or source switching.
Technically, the SY89829UHI is designed for LVPECL clock distribution where differential signaling, high fanout, and controlled source impedance are important. Its exposed thermal pad provides a direct heat-transfer path from the device to the PCB copper plane. Because the package contains 64 leads, correct land-pattern placement and thermal-pad assembly are essential for reliable operation.
Typical applications include redundant clock routing for communications equipment, high-speed backplane clock distribution, server and networking clock trees, industrial control systems, FPGA clock distribution, and test-and-measurement instrumentation. The device is especially useful where a design needs multiple LVPECL outputs and selectable input clocks.
When laying out a board using the SY89829UHI, use the manufacturer pin description and land pattern for every connection, maintain short differential clock routes, and provide a continuous ground reference beneath the exposed pad. Account for output-device and receiver loading when validating edge rate, return loss, and fanout margin.
This product page combines the SY89829UHI operating characteristics, package details, sourcing guidance, and drop-in replacement information. It also provides practical design notes and parameter comparisons that help engineers evaluate clock distribution, redundancy, thermal management, and PCB implementation requirements.
直接替換替代品,適用於 SY89829UHI — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: SY89829UHI (相同外形與佔位) — 差異在於 Package, Product Type.
SY89829UHY
✅ 直接替換聯絡詢價
查看資料表 →SY89829UHI 規格
| Product Type | Clock Fanout Buffer and Multiplexer IC |
| Clock Driver Configuration | Dual 1:10 |
| Circuit Count | 2 circuits |
| Input Multiplexing Ratio | 2:1 |
| Output Fanout Ratio | 2:10 |
| 最大時脈頻率 | 2 GHz |
| 供應電壓 | 2.5 V or 3.3 V |
| Logic Standard | LVPECL |
| Internal Termination | Yes |
| Redundant Switchover | Yes |
| 封裝 | 64-TQFP with exposed pad |
| 腳位數 | 64 pins |
| 安裝類型 | Surface mount |
SY89829UHI 64-tqfp with exposed pad 腳位配置指南
SY89829UHI(64-tqfp with exposed pad 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SY89829UHI.
請參閱 資料表 以查看完整腳位配置。
典型應用
SY89829UHI 適用於 6 應用s: Redundant Communication Clock Distribution, FPGA Clock Trees, High-Speed Backplane Clocking, Industrial Control and Data Acquisition, Server and Network Equipment, Test and Measurement Instrumentation.
Redundant Communication Clock Distribution
The SY89829UHI fits communication systems that must distribute a selected differential clock across multiple high-speed loads. Its dual 1:10 LVPECL driver circuits, 2:1 input multiplexer, and redundant switchover support clock-source selection without relying on a separate mux stage. Operation up to 2 GHz suits high-speed line cards and backplane clock trees, while the internal termination helps simplify compatible LVPECL interfaces. Designers should verify switchover timing, source phase relationship, and loss-of-clock behavior against the system clocking specification.
推薦
FPGA Clock Trees
The SY89829UHI can serve as a fanout stage in FPGA-based clock trees where one selected reference must reach multiple clock regions. The 2:10 device-level fanout reduces buffer depth, and the 2 GHz operating limit accommodates demanding serial, network, and signal-processing designs. Internal termination supports compatible LVPECL links when the PCB and downstream receivers are characterized correctly. Before placement, confirm FPGA clock-input thresholds, trace length behavior, and whether the clock manager requires a specific source arrangement.
推薦
High-Speed Backplane Clocking
The SY89829UHI is appropriate for backplane clock distribution where one LVPECL source must feed multiple endpoints across a controlled board environment. Its dual 1:10 architecture provides substantial fanout, and the 2 GHz specification supports demanding digital backplanes. Differential routing and internal termination can simplify endpoint interfaces, but insertion loss, connector transitions, and reflection behavior must be evaluated together. Maintain continuous reference planes and use the manufacturer package layout to preserve thermal and signal-return continuity.
推薦
Industrial Control and Data Acquisition
The SY89829UHI can support high-speed clock distribution in industrial control, data-acquisition, and automated test systems. Its selectable input paths help implement source redundancy, while the dual-driver organization supports parallel clock trees for converters, counters, and digital logic. The 2.5 V or 3.3 V operating options align with compact control electronics, and operation up to 2 GHz provides margin for demanding timing chains. System designers should isolate noisy analog sections and validate common-mode and noise performance in the completed assembly.
推薦
Server and Network Equipment
The SY89829UHI addresses clock-fanout requirements in servers, routers, and switching equipment where a stable differential reference must reach multiple subsystems. The dual 1:10 driver configuration provides local fanout, and the 2:1 multiplexer supports selectable sources for redundancy. Its 2 GHz capability is suitable for high-speed digital clocking architectures, while internal termination simplifies compatible LVPECL endpoints. The layout must preserve controlled impedance and pair symmetry, and the power design should provide low-noise, decoupled supply connections.
推薦
Test and Measurement Instrumentation
The SY89829UHI can provide a selectable, high-fanout clock source for test and measurement instrumentation that synchronizes multiple converters, counters, or digital channels. The dual LVPECL driver architecture and 2 GHz operating capability support fast test-clock distribution, while internal termination reduces termination complexity in compatible networks. Because measurement accuracy can be affected by clock jitter, skew, and reflection, engineers should characterize the complete fixture and cable path rather than relying only on nominal device frequency.
推薦
推薦產品摘要
工程參考資料,適用於 SY89829UHI — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | SY89829UHY |
|---|---|---|
| Package | 64-TQFP with exposed pad | 64-TQFP with exposed pad |
| Brand | Microchip Technology | Microchip Technology |
| Clock Driver Configuration | Dual 1:10 | Dual 1:10 |
| Maximum Clock Frequency | 2 GHz | 2 GHz |
| Supply Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
| Logic Standard | LVPECL | LVPECL |
| Input Multiplexing Ratio | 2:1 | 2:1 |
| Internal Termination | Yes | Yes |
| Redundant Switchover | Yes | Yes |
主要差異化特點
- Matched high-speed clock-driver characteristics (對比SY89829UHY)
- Integrated redundant-clock control (對比SY89829UHY)
- Compatible LVPECL interface implementation (對比SY89829UHY)
設計說明
Use the manufacturer's 64-TQFP exposed-pad land pattern and pin table as the authority for PCB implementation. Preserve differential pair symmetry and a continuous ground reference beneath the clock routes. Place bypass capacitors at the device's supply pins according to the datasheet guidance and keep the exposed-pad connection continuous with the ground plane to maintain both signal return and thermal performance.
Treat every LVPECL route as a controlled-impedance transmission line rather than a general-purpose logic trace. Match differential impedance to the board stack-up, minimize branch stubs, and maintain consistent spacing from other high-speed signals. The 2 GHz operating capability leaves no margin for careless transitions, so connector and test-point geometry should be included in the signal-integrity simulation.
Bond the exposed pad to a continuous PCB ground plane and follow the manufacturer's solder-paste and assembly guidance for void control. Estimated: the device's actual dissipation depends on supply voltage, output loading, switching activity, and ambient temperature; calculate those values from the operating condition and confirm junction-temperature margin using the manufacturer thermal characterization. Do not use an assumed thermal figure for production qualification.
Do not assume that internal termination removes the need to characterize the entire link. Account for source impedance, receiver termination, loss from connectors and traces, and the effects of unused outputs. For redundant-clock operation, define switchover timing and phase behavior in the system specification, then verify that the selected clock source remains valid during the transition.
合規資訊
The product pages and indexed datasheet descriptions do not state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using the current manufacturer product documentation.