Microchip Technology

SY89829UHI - 2:10 2GHz LVPECL Clock Driver | Microchip

MPN: SY89829UHI ✓ فعال
2.5 V or 3.3 V Vdss 64-TQFP with exposed pad Package Dual 1:10 Speed
حداقل سفارش: 1 |

SY89829UHI نمای کلی

The Microchip Technology SY89829UHI is a dual 1:10 LVPECL clock driver and translator with a 2:1 multiplexed input, a maximum operating frequency of 2 GHz, and a 64-TQFP exposed-pad package. The device operates from 2.5 V or 3.3 V and provides internal termination for direct LVPECL clock distribution.

A clock driver is a timing-interface semiconductor that receives a high-speed differential clock and generates multiple buffered outputs. The SY89829UHI belongs to the clock buffer and driver hierarchy, combining a 2:1 input multiplexer, redundant switchover, internal termination, and differential clock distribution in one device. This integration supports clock redundancy in communication, industrial, and computing systems.

Key features include two independent clock-driver circuits, a 2:10 output ratio per circuit, 2 GHz operating performance, and support for 2.5 V or 3.3 V operation. Internal termination reduces the need for separate termination components when the device is used with compatible LVPECL interfaces. The 2:1 multiplexer allows a system to select between two clock sources for redundancy or source switching.

Technically, the SY89829UHI is designed for LVPECL clock distribution where differential signaling, high fanout, and controlled source impedance are important. Its exposed thermal pad provides a direct heat-transfer path from the device to the PCB copper plane. Because the package contains 64 leads, correct land-pattern placement and thermal-pad assembly are essential for reliable operation.

Typical applications include redundant clock routing for communications equipment, high-speed backplane clock distribution, server and networking clock trees, industrial control systems, FPGA clock distribution, and test-and-measurement instrumentation. The device is especially useful where a design needs multiple LVPECL outputs and selectable input clocks.

When laying out a board using the SY89829UHI, use the manufacturer pin description and land pattern for every connection, maintain short differential clock routes, and provide a continuous ground reference beneath the exposed pad. Account for output-device and receiver loading when validating edge rate, return loss, and fanout margin.

This product page combines the SY89829UHI operating characteristics, package details, sourcing guidance, and drop-in replacement information. It also provides practical design notes and parameter comparisons that help engineers evaluate clock distribution, redundancy, thermal management, and PCB implementation requirements.

جایگزین‌های drop-in برای SY89829UHI — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای SY89829UHI (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type.

Microchip Technology
Package: 64-pin TQFP with exposed pad
Product Type: Dual 1:10 or single 1:20 LVPECL clock driver and fanout buffer
مقایسه با SY89829UHI →

SY89829UHY

✅ جایگزین مستقیم
Microchip Technology
📦 64-TQFP with exposed pad
Dual 1:10 or single 1:20 LVPECL clock driver and fanout buffer · 2.5 V or 3.3 V · 2 GHz · Dual 1:10 or single 1:20 · 20 outputs · LVPECL or LVDS · LVPECL · 50 ps

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

SY89829UHI مشخصات

Product Type Clock Fanout Buffer and Multiplexer IC
Clock Driver Configuration Dual 1:10
Circuit Count 2 circuits
Input Multiplexing Ratio 2:1
Output Fanout Ratio 2:10
حداکثر فرکانس کلاک 2 GHz
ولتاژ تغذیه 2.5 V or 3.3 V
Logic Standard LVPECL
Internal Termination Yes
Redundant Switchover Yes
بسته‌بندی 64-TQFP with exposed pad
تعداد پایه 64 pins
نوع نصب Surface mount

راهنمای پیکربندی پین SY89829UHI 64-tqfp with exposed pad

پیکربندی پین برای SY89829UHI (پکیج 64-tqfp with exposed pad). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 64-tqfp with exposed pad برای SY89829UHI

داده پین‌آوت تفصیلی موجود نیست برای SY89829UHI.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

SY89829UHI مناسب است برای 6 کاربردs: Redundant Communication Clock Distribution, FPGA Clock Trees, High-Speed Backplane Clocking, Industrial Control and Data Acquisition, Server and Network Equipment, Test and Measurement Instrumentation.

🌐

Redundant Communication Clock Distribution

The SY89829UHI fits communication systems that must distribute a selected differential clock across multiple high-speed loads. Its dual 1:10 LVPECL driver circuits, 2:1 input multiplexer, and redundant switchover support clock-source selection without relying on a separate mux stage. Operation up to 2 GHz suits high-speed line cards and backplane clock trees, while the internal termination helps simplify compatible LVPECL interfaces. Designers should verify switchover timing, source phase relationship, and loss-of-clock behavior against the system clocking specification.

🖥️

FPGA Clock Trees

The SY89829UHI can serve as a fanout stage in FPGA-based clock trees where one selected reference must reach multiple clock regions. The 2:10 device-level fanout reduces buffer depth, and the 2 GHz operating limit accommodates demanding serial, network, and signal-processing designs. Internal termination supports compatible LVPECL links when the PCB and downstream receivers are characterized correctly. Before placement, confirm FPGA clock-input thresholds, trace length behavior, and whether the clock manager requires a specific source arrangement.

🌐

High-Speed Backplane Clocking

The SY89829UHI is appropriate for backplane clock distribution where one LVPECL source must feed multiple endpoints across a controlled board environment. Its dual 1:10 architecture provides substantial fanout, and the 2 GHz specification supports demanding digital backplanes. Differential routing and internal termination can simplify endpoint interfaces, but insertion loss, connector transitions, and reflection behavior must be evaluated together. Maintain continuous reference planes and use the manufacturer package layout to preserve thermal and signal-return continuity.

🏭

Industrial Control and Data Acquisition

The SY89829UHI can support high-speed clock distribution in industrial control, data-acquisition, and automated test systems. Its selectable input paths help implement source redundancy, while the dual-driver organization supports parallel clock trees for converters, counters, and digital logic. The 2.5 V or 3.3 V operating options align with compact control electronics, and operation up to 2 GHz provides margin for demanding timing chains. System designers should isolate noisy analog sections and validate common-mode and noise performance in the completed assembly.

🖥️

Server and Network Equipment

The SY89829UHI addresses clock-fanout requirements in servers, routers, and switching equipment where a stable differential reference must reach multiple subsystems. The dual 1:10 driver configuration provides local fanout, and the 2:1 multiplexer supports selectable sources for redundancy. Its 2 GHz capability is suitable for high-speed digital clocking architectures, while internal termination simplifies compatible LVPECL endpoints. The layout must preserve controlled impedance and pair symmetry, and the power design should provide low-noise, decoupled supply connections.

🔧

Test and Measurement Instrumentation

The SY89829UHI can provide a selectable, high-fanout clock source for test and measurement instrumentation that synchronizes multiple converters, counters, or digital channels. The dual LVPECL driver architecture and 2 GHz operating capability support fast test-clock distribution, while internal termination reduces termination complexity in compatible networks. Because measurement accuracy can be affected by clock jitter, skew, and reflection, engineers should characterize the complete fixture and cable path rather than relying only on nominal device frequency.

What is the SY89829UHI?
The SY89829UHI is a dual 1:10 LVPECL clock driver and translator with a 2:1 multiplexed input, 2 GHz maximum clock frequency, internal termination, and redundant switchover. According to the Micrel manufacturer datasheet, the device provides two clock-driver circuits in a 64-TQFP exposed-pad package for high-speed differential clock distribution.
What are the key specifications of SY89829UHI that engineers should know?
The SY89829UHI combines two 1:10 clock-driver circuits with 2:1 input multiplexing, 2 GHz operation, 2.5 V or 3.3 V supply operation, internal termination, and redundant switchover. The manufacturer datasheet identifies a 64-TQFP exposed-pad package. These characteristics make the device relevant to redundant LVPECL clock trees, high-fanout distribution, and selectable-clock architectures.
Where can I download the SY89829UHI datasheet PDF?
The SY89829UHI datasheet is accessible from the manufacturer documentation linked by the product page and from the indexed datasheet record listed for the Micrel device. The document describes the dual 1:10 LVPECL clock driver, 2:1 input multiplexer, internal termination, redundant switchover, and 64-TQFP exposed-pad implementation. Use the manufacturer pin table and package drawing when creating the PCB footprint.
Where can I find the SY89829UHI pinout?
The SY89829UHI pinout is defined in the pin-description table of the Micrel manufacturer datasheet. The device uses a 64-lead TQFP package with an exposed pad, so the footprint must include both the 64 perimeter lands and the exposed thermal-pad geometry specified by the package drawing. Use that table to assign supply, ground, clock inputs, and differential outputs before routing the board.
What clock frequency does the SY89829UHI support?
The SY89829UHI supports clock frequencies up to 2 GHz, according to the Micrel manufacturer datasheet and the indexed product specifications. This rate makes the device suitable for high-speed LVPECL distribution in communication equipment, backplanes, network systems, FPGA clock trees, and instrumentation. Final edge-rate margin should be validated with the actual trace, connector, and receiver loading.
What supply voltages can the SY89829UHI operate at?
The SY89829UHI supports operation at 2.5 V or 3.3 V. The Micrel manufacturer datasheet describes it as a 2.5 V and 3.3 V LVPECL clock driver. The selected supply arrangement must satisfy the device's input, output, termination, and decoupling requirements. Confirm the exact voltage rails and ground references in the pin table before finalizing the power architecture.
How many clock outputs does the SY89829UHI provide?
The SY89829UHI contains two 1:10 clock-driver circuits, producing a listed 2:10 output configuration for the device. According to the Micrel manufacturer datasheet, each driver accepts a multiplexed differential clock path and distributes it across ten outputs. The resulting fanout reduces clock-tree depth compared with cascading multiple buffer stages.
Does the SY89829UHI include internal termination?
Yes. The SY89829UHI includes internal termination, as stated in the Micrel manufacturer datasheet. This feature is intended for compatible LVPECL clock networks and can reduce the external termination burden when the device is used with a correctly designed source and receiver arrangement. PCB verification should still account for trace loss, connector loading, and any additional downstream terminations.
What is the difference between SY89829UHI and SY89829UHY?
The indexed cross-reference identifies SY89829UHY as a complete replacement for SY89829UHI because the package, terminals, and principal functional characteristics are consistent. Both use the 64-TQFP form and are associated with the same dual 1:10 LVPECL clock-driver function. Review the manufacturer ordering table and device markings before approving either suffix for a new design.
Can SY89829UHY replace SY89829UHI on the same PCB?
Yes. The cross-reference comparison describes SY89829UHY as a complete replacement for SY89829UHI with consistent terminals, package, and main performance characteristics. Its listed TQFP-64 package matches the SY89829UHI package family. Confirm the exposed-pad implementation, temperature range, qualification status, and lot traceability against the current manufacturer datasheet before production use.
What is the best drop-in replacement for SY89829UHI?
SY89829UHY is the verified same-footprint drop-in candidate identified for the SY89829UHI. The comparison describes it as a complete replacement with consistent terminals, package, and principal functional characteristics, supporting a 100% key-parameter match. Verify ordering information and exposed-pad details against the current manufacturer datasheet because suffix-specific requirements can differ.
When should I choose SY89829UHI over SY89829UHY?
Choose SY89829UHI when its exact ordering suffix is approved for the required supply, qualification, and procurement plan. SY89829UHY is listed as a complete package-compatible replacement, so it is appropriate when that suffix meets the design's sourcing and documentation requirements. The key decision is not circuit function but exact suffix qualification, lifecycle expectations, and manufacturing traceability.
Is SY89829UHI suitable for redundant clock distribution?
The SY89829UHI is suitable for redundant clock distribution because it combines a 2:1 input multiplexer with redundant switchover and dual LVPECL clock-driver circuits. According to the Micrel manufacturer datasheet, this architecture supports selectable clock sources while maintaining 2 GHz-class operation. The system should define switchover timing, control logic, and loss-of-clock behavior during design verification.
How should the SY89829UHI exposed pad be handled on a PCB?
The exposed pad should be connected to the device's specified ground reference and thermally coupled to the PCB through the manufacturer land pattern. Use solder mask and paste procedures appropriate for the exposed-pad geometry, then inspect the assembly for voids because incomplete thermal-pad soldering raises junction temperature. Keep the thermal path free of plane cuts wherever the layout rules permit.
Where can I buy SY89829UHI and check its lead time?
Use the Request a Quote form on this page to request SY89829UHI availability, commercial terms, and the current lead time. The form allows buyers to specify the required quantity and packaging without relying on stale public pricing. Supply forecasts and production schedules should also account for the device's age and the manufacturer's latest product lifecycle notice.

داده‌های مرجع مهندسی برای SY89829UHI — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose SY89829UHI when the design requires a dual 1:10 LVPECL clock driver with a 2:1 multiplexer, internal termination, redundant switchover, and operation up to 2 GHz. Its 64-TQFP exposed-pad package is intended for high-speed clock trees in communications, FPGA, backplane, server, industrial, and test systems. Select SY89829UHY when the manufacturer confirms that suffix has the required qualification, lifecycle, sourcing, and traceability characteristics; the indexed comparison identifies it as a complete package-compatible replacement with the same principal performance characteristics. Because this clock-driver family is not represented by multiple independently verified cross-brand drop-ins, the selection should emphasize exact package validation, supported supply voltage, source-switchover requirements, and the manufacturer ordering information rather than assuming generic LVPECL drivers are interchangeable.

مقایسه با جایگزین‌ها

پارامتر این محصول SY89829UHY
Package 64-TQFP with exposed pad 64-TQFP with exposed pad
Brand Microchip Technology Microchip Technology
Clock Driver Configuration Dual 1:10 Dual 1:10
Maximum Clock Frequency 2 GHz 2 GHz
Supply Voltage 2.5 V or 3.3 V 2.5 V or 3.3 V
Logic Standard LVPECL LVPECL
Input Multiplexing Ratio 2:1 2:1
Internal Termination Yes Yes
Redundant Switchover Yes Yes

تفاوت‌های کلیدی

  • Matched high-speed clock-driver characteristics (در مقابلSY89829UHY)
  • Integrated redundant-clock control (در مقابلSY89829UHY)
  • Compatible LVPECL interface implementation (در مقابلSY89829UHY)

یادداشت‌های طراحی

Use the manufacturer's 64-TQFP exposed-pad land pattern and pin table as the authority for PCB implementation. Preserve differential pair symmetry and a continuous ground reference beneath the clock routes. Place bypass capacitors at the device's supply pins according to the datasheet guidance and keep the exposed-pad connection continuous with the ground plane to maintain both signal return and thermal performance.

Treat every LVPECL route as a controlled-impedance transmission line rather than a general-purpose logic trace. Match differential impedance to the board stack-up, minimize branch stubs, and maintain consistent spacing from other high-speed signals. The 2 GHz operating capability leaves no margin for careless transitions, so connector and test-point geometry should be included in the signal-integrity simulation.

Bond the exposed pad to a continuous PCB ground plane and follow the manufacturer's solder-paste and assembly guidance for void control. Estimated: the device's actual dissipation depends on supply voltage, output loading, switching activity, and ambient temperature; calculate those values from the operating condition and confirm junction-temperature margin using the manufacturer thermal characterization. Do not use an assumed thermal figure for production qualification.

Do not assume that internal termination removes the need to characterize the entire link. Account for source impedance, receiver termination, loss from connectors and traces, and the effects of unused outputs. For redundant-clock operation, define switchover timing and phase behavior in the system specification, then verify that the selected clock source remains valid during the transition.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The product pages and indexed datasheet descriptions do not state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using the current manufacturer product documentation.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

SY89829UHI datasheet SY89829UHI pinout SY89829UHI datasheet pdf SY89829UHI specifications SY89829UHI equivalent SY89829UHI replacement SY89829UHI vs SY89829UHY SY89829UHI TQFP-64 footprint SY89829UHI LVPECL clock driver Microchip SY89829UHI SY89829UHI redundant clock SY89829UHI price SY89829UHI stock SY89829UHI clock application circuit

قطعات و اصطلاحات مرتبط

Microchip Technology Micrel SY89829UHI SY89829UHY clock fanout buffer clock driver clock translator LVPECL ECL clock distribution clock multiplexing redundant switchover internal termination 2 GHz clock 2:10 fanout 2:1 multiplexer 64-TQFP exposed-pad package TQFP package family surface-mount package differential clock FPGA clock tree backplane clocking communication equipment industrial control semiconductor
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ