TAS5614PHD - 150W Stereo Class D Power Stage | TI
MPN: TAS5614PHD ✓ Hoạt độngTAS5614PHD Tóm tắt
A Class D audio power stage is a switching amplifier that converts an analog audio waveform into a high-frequency PWM output, filtering it at the speaker terminals to recover the amplified audio signal. Its place in the hierarchy is audio power IC, power amplifier IC, Class D amplifier, and power-management semiconductor. Compared with a linear amplifier, the switching architecture can substantially reduce output-stage dissipation while maintaining low distortion through closed-loop feedback.
The headline capabilities are 150W stereo output, 300W mono output, a Class D output stage, analog input, and PurePath HD feedback. The device can operate from an 18V to 38V supply range, while published supply figures also identify a 10.8V to 13.2V operating condition. The manufacturer positions the part for driving 4 ohm to 8 ohm stereo speakers from one 36V supply, making it relevant to powered speakers, AV receivers, compact cinema systems, and professional audio equipment.
The TAS5614PHD is intended as a power-stage device rather than a complete audio system controller. Its input and digital-control functions must be integrated with a preamplifier or codec that supplies the audio signal. Closed-loop PurePath HD feedback is the central architecture feature: the amplifier monitors its output and corrects the switching stage to reduce distortion rather than relying only on open-loop drive accuracy.
Because the device dissipates substantial power at high output levels, the exposed heatslug is central to the mechanical design. Texas Instruments specifies a high-performance thermal interface material between the package heatslug and the heat sink. The 14 x 14 mm HTQFP package therefore needs a defined heat-spreading and convection path to sustain the 150W stereo and 300W mono ratings.
This page combines the manufacturer product information with distributor listings and a package-level comparison for design planning. Because the detailed pin-description and thermal tables reside in the manufacturer datasheet, use that document for final pin assignment, exposed-pad treatment, filter selection, and heat-sink design.
Bộ thay thế dễ dàng lắp đặt cho TAS5614PHD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TAS5614PHD (cùng hình factor và footprint) — khác nhau ở Product Type.
TAS5613PHD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TAS5612PHD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TAS5614PHD Tỷ lệ tối đa & tính chất điện
| Product Type | Stereo or mono Class D audio power stage |
| Maximum Stereo Output Power | 150 W |
| Maximum Mono Output Power | 300 W |
| Amplifier Class | Class D |
| Input Type | Analog input |
| Feedback Architecture | PurePath HD integrated closed-loop feedback |
| Channel Configuration | 1-channel mono or 2-channel stereo |
| Supply Voltage Range | 18 V to 38 V |
| Published Supply Voltage | 10.8 V to 13.2 V |
| Single-Supply Operating Point | Up to 36 V |
| Supported Speaker Impedance | 4 ohm to 8 ohm |
| Hộp | 64-pin HTQFP, 14 x 14 mm |
| Kiểu lắp đặt | Surface Mount |
| Thermal Interface | Exposed heatslug with thermal interface material to heat sink |
Hướng dẫn cấu hình chân TAS5614PHD 64-pin htqfp, 14 x 14 mm
Cấu hình chân cho TAS5614PHD (64-pin htqfp, 14 x 14 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TAS5614PHD.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TAS5614PHD phù hợp cho 6 Áp dụngs: Powered Stereo Speaker, Compact Cinema Amplifier, Professional Speaker Power Stage, Subwoofer and LFE Amplifier, Multichannel AV Power Amplifier, Digital Media Speaker Amplifier.
Powered Stereo Speaker
The TAS5614PHD suits a high-power powered-speaker design because it can deliver 150W in stereo mode and drive 4 ohm to 8 ohm speakers from one supply. Place the Class D output stage behind an analog preamplifier or audio codec, and size the heat sink for the actual dissipation at the selected supply voltage and output level. The 64-pin HTQFP package needs a low-impedance thermal path from its exposed heatslug to the heat sink. Its advantage over a smaller Class D module is output capability within one board; the trade-off is substantially greater heat management and a higher-voltage supply requirement.
Được đề xuất
Compact Cinema Amplifier
A compact home-cinema power amplifier can use the TAS5614PHD to produce 150W stereo or 300W mono output for passive loudspeakers. The supported 4 ohm to 8 ohm impedance range and PurePath HD closed-loop feedback are useful when designing a multi-channel receiver around a compact power-stage module. Use an analog preamplifier to set level, then follow the manufacturer application circuit for input filtering and power-supply decoupling. Compared with a discrete output-transistor stage, the integrated Class D device reduces board area, but it demands careful heat-sinking and clean grounding at high output power.
Được đề xuất
Professional Speaker Power Stage
The TAS5614PHD is appropriate for a professional speaker power module where 150W stereo or 300W mono capability is needed in a 4 ohm to 8 ohm load. Its Class D output stage can improve amplifier efficiency while PurePath HD feedback controls the output waveform. The design must include a substantial heat sink, a thermal interface between the exposed heatslug and sink, and a low-noise power supply capable of supporting the selected output level. Compared with an analog class-AB output stage, this device can reduce output-stage losses, while the switching design still requires careful layout to avoid unwanted EMI coupling into sensitive audio paths.
Được đề xuất
Subwoofer and LFE Amplifier
The TAS5614PHD can be configured for mono operation at up to 300W, making it suitable for a subwoofer or LFE power-amplifier channel. The 36V single-supply capability supports higher output power than a conventional low-voltage audio amplifier, while the 4 ohm impedance target matches many home subwoofers. Use the manufacturer's recommended input and output filters for the selected load and control topology. Compared with using two stereo channels, mono operation concentrates the amplifier's thermal budget into one output channel, so the heat sink must be sized for the full 300W-class operating condition rather than half-power stereo dissipation.
Được đề xuất
Multichannel AV Power Amplifier
A multichannel AV amplifier can pair multiple TAS5614PHD power stages with a multichannel codec to provide amplified speaker drive in a home-theater or distributed-audio system. The 150W stereo capability supports two conventional channels, and mono configurations can serve center or subwoofer outputs. Centralize digital source selection in a codec such as the AK7755EN, then feed each analog power-stage channel through the required filtering and gain network. Compared with dedicated amplifier modules, this approach provides integrated Class D efficiency and flexible channel assignment, while PCB routing must keep switching-current loops compact and away from the audio input references.
Được đề xuất
Digital Media Speaker Amplifier
A networked or digital media speaker can combine an audio codec with the TAS5614PHD to create a high-power Class D output section for a smart speaker or powered cabinet. The analog-input architecture allows the codec to deliver a conventional audio waveform while the integrated closed-loop power stage handles high-current loudspeaker drive. Its 150W stereo rating supports substantially more acoustic output than a portable Class D amplifier, but it also raises system power-supply and thermal requirements. Compared with a compact portable amplifier, the design gains output headroom and speaker-impedance support at the cost of a larger heat sink, bulkier supply hardware, and more demanding EMC attention.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TAS5614PHD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TAS5613PHD | TAS5612PHD |
|---|---|---|---|
| Package | 64-pin HTQFP (14 x 14 mm) | 64-pin HTQFP (14 x 14 mm) - verify land pattern in datasheet | 64-pin HTQFP (14 x 14 mm) - verify land pattern in datasheet |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Stereo or mono Class D audio power stage | Class D audio power stage | Class D audio power stage |
Bảo phân biệt quan trọng
- Higher documented stereo and mono output capability within the TI power-stage family (vsTAS5613PHD)
- Designed for high-power speaker drive from a single supply (vsTAS5612PHD)
- Integrated PurePath HD closed-loop feedback (vsTAS5613PHD)
Ghi chú thiết kế
The exposed heatslug is not optional at high output power. Texas Instruments recommends a high-performance thermal interface material between the package heatslug and the heat sink. Estimate: at 24V supply, 150W stereo output, and approximately 85% Class D efficiency, total output-stage loss is about 26.5W, or roughly 13.2W per channel. Confirm the estimate against the device efficiency curve and size the heat sink for the actual ambient temperature and enclosure airflow.
Treat the Class D power stage as a high-current switching design even though its audio input is analog. Keep input, gain-control, and feedback-routing tracks away from output-current loops and the exposed-pad area. Place input filtering and support components close to their associated pins, and follow the manufacturer layout example for thermal-via placement, power-stage grounding, and supply decoupling.
The 18V to 38V supply range and 300W mono capability require a power source with low ripple, adequate transient response, and correctly rated bulk and local decoupling. Do not calculate the supply from output power alone; include the Class D efficiency, speaker impedance, filter losses, and standby or idle consumption. The 36V single-supply operating point is appropriate for the stated high-power configuration, but the complete power tree must remain within the device's absolute limits.
A Class D output stage radiates switching energy, so filter selection and return-current geometry determine EMI performance. Use the manufacturer's recommended LC output filters, keep the switching loop compact, and connect filter components to the quiet power-stage ground reference rather than the chassis or a high-current output ground. Validate radiated and conducted emissions at the finished-product level because the complete enclosure, cable shield, speaker wiring, and power supply affect the result.
Thông tin tuân thủ
Compliance attributes require confirmation from the current Texas Instruments product page or the manufacturer declaration for the exact ordering code.