Texas Instruments

TAS5614PHD - 150W Stereo Class D Power Stage | TI

料号: TAS5614PHD ✓ 量产中
18 V to 38 V Vdss 64-pin HTQFP, 14 x 14 mm Package
最小起订量: 1 |

TAS5614PHD 概述

The Texas Instruments TAS5614PHD is a 150W stereo or 300W mono Class D audio power stage using PurePath HD technology and housed in a 64-pin HTQFP package measuring 14 x 14 mm. It accepts analog audio input and uses integrated closed-loop feedback to drive 4 ohm to 8 ohm speakers from a single supply rated up to 36V.

A Class D audio power stage is a switching amplifier that converts an analog audio waveform into a high-frequency PWM output, filtering it at the speaker terminals to recover the amplified audio signal. Its place in the hierarchy is audio power IC, power amplifier IC, Class D amplifier, and power-management semiconductor. Compared with a linear amplifier, the switching architecture can substantially reduce output-stage dissipation while maintaining low distortion through closed-loop feedback.

The headline capabilities are 150W stereo output, 300W mono output, a Class D output stage, analog input, and PurePath HD feedback. The device can operate from an 18V to 38V supply range, while published supply figures also identify a 10.8V to 13.2V operating condition. The manufacturer positions the part for driving 4 ohm to 8 ohm stereo speakers from one 36V supply, making it relevant to powered speakers, AV receivers, compact cinema systems, and professional audio equipment.

The TAS5614PHD is intended as a power-stage device rather than a complete audio system controller. Its input and digital-control functions must be integrated with a preamplifier or codec that supplies the audio signal. Closed-loop PurePath HD feedback is the central architecture feature: the amplifier monitors its output and corrects the switching stage to reduce distortion rather than relying only on open-loop drive accuracy.

Because the device dissipates substantial power at high output levels, the exposed heatslug is central to the mechanical design. Texas Instruments specifies a high-performance thermal interface material between the package heatslug and the heat sink. The 14 x 14 mm HTQFP package therefore needs a defined heat-spreading and convection path to sustain the 150W stereo and 300W mono ratings.

This page combines the manufacturer product information with distributor listings and a package-level comparison for design planning. Because the detailed pin-description and thermal tables reside in the manufacturer datasheet, use that document for final pin assignment, exposed-pad treatment, filter selection, and heat-sink design.

直接替换替代料: TAS5614PHD ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: TAS5614PHD (相同外形与封装尺寸) ——差异在于 Product Type.

Texas Instruments
Product Type: Class D audio power amplifier
对比 TAS5614PHD →

TAS5613PHD

✅ 直接替换
Texas Instruments
📦 64-pin HTQFP (14 x 14 mm)
Stereo Class-D analog-input audio power stage · 150 W · 300 W · 18 V to 38 V · 10.8 V to 13.2 V · Up to 80 kHz · 0.03% at 1 W into 4 ohms · 80 dB in BTL configuration without an input signal

联系询价

查看数据手册 →

TAS5612PHD

✅ 直接替换
Texas Instruments
📦 64-pin HTQFP (14 x 14 mm)
Class D audio power amplifier · PurePath HD integrated closed-loop feedback · 125 W per channel · 250 W · 1-channel mono or 2-channel stereo · 4 ohm to 8 ohm · 16 V to 34.1 V · 10.8 V to 13.2 V

联系询价

查看数据手册 →

TAS5614PHD 最大额定值与电气特性

Product Type Stereo or mono Class D audio power stage
Maximum Stereo Output Power 150 W
Maximum Mono Output Power 300 W
Amplifier Class Class D
Input Type Analog input
Feedback Architecture PurePath HD integrated closed-loop feedback
Channel Configuration 1-channel mono or 2-channel stereo
Supply Voltage Range 18 V to 38 V
Published Supply Voltage 10.8 V to 13.2 V
Single-Supply Operating Point Up to 36 V
Supported Speaker Impedance 4 ohm to 8 ohm
封装 64-pin HTQFP, 14 x 14 mm
安装类型 Surface Mount
Thermal Interface Exposed heatslug with thermal interface material to heat sink

TAS5614PHD 64-pin htqfp, 14 x 14 mm 引脚配置指南

TAS5614PHD(64-pin htqfp, 14 x 14 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

TAS5614PHD 的 64-pin htqfp, 14 x 14 mm 封装引脚图

暂无详细引脚数据: TAS5614PHD.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TAS5614PHD 适用于 6 应用s: Powered Stereo Speaker, Compact Cinema Amplifier, Professional Speaker Power Stage, Subwoofer and LFE Amplifier, Multichannel AV Power Amplifier, Digital Media Speaker Amplifier.

🎧

Powered Stereo Speaker

The TAS5614PHD suits a high-power powered-speaker design because it can deliver 150W in stereo mode and drive 4 ohm to 8 ohm speakers from one supply. Place the Class D output stage behind an analog preamplifier or audio codec, and size the heat sink for the actual dissipation at the selected supply voltage and output level. The 64-pin HTQFP package needs a low-impedance thermal path from its exposed heatslug to the heat sink. Its advantage over a smaller Class D module is output capability within one board; the trade-off is substantially greater heat management and a higher-voltage supply requirement.

📺

Compact Cinema Amplifier

A compact home-cinema power amplifier can use the TAS5614PHD to produce 150W stereo or 300W mono output for passive loudspeakers. The supported 4 ohm to 8 ohm impedance range and PurePath HD closed-loop feedback are useful when designing a multi-channel receiver around a compact power-stage module. Use an analog preamplifier to set level, then follow the manufacturer application circuit for input filtering and power-supply decoupling. Compared with a discrete output-transistor stage, the integrated Class D device reduces board area, but it demands careful heat-sinking and clean grounding at high output power.

🔊

Professional Speaker Power Stage

The TAS5614PHD is appropriate for a professional speaker power module where 150W stereo or 300W mono capability is needed in a 4 ohm to 8 ohm load. Its Class D output stage can improve amplifier efficiency while PurePath HD feedback controls the output waveform. The design must include a substantial heat sink, a thermal interface between the exposed heatslug and sink, and a low-noise power supply capable of supporting the selected output level. Compared with an analog class-AB output stage, this device can reduce output-stage losses, while the switching design still requires careful layout to avoid unwanted EMI coupling into sensitive audio paths.

🔉

Subwoofer and LFE Amplifier

The TAS5614PHD can be configured for mono operation at up to 300W, making it suitable for a subwoofer or LFE power-amplifier channel. The 36V single-supply capability supports higher output power than a conventional low-voltage audio amplifier, while the 4 ohm impedance target matches many home subwoofers. Use the manufacturer's recommended input and output filters for the selected load and control topology. Compared with using two stereo channels, mono operation concentrates the amplifier's thermal budget into one output channel, so the heat sink must be sized for the full 300W-class operating condition rather than half-power stereo dissipation.

🎬

Multichannel AV Power Amplifier

A multichannel AV amplifier can pair multiple TAS5614PHD power stages with a multichannel codec to provide amplified speaker drive in a home-theater or distributed-audio system. The 150W stereo capability supports two conventional channels, and mono configurations can serve center or subwoofer outputs. Centralize digital source selection in a codec such as the AK7755EN, then feed each analog power-stage channel through the required filtering and gain network. Compared with dedicated amplifier modules, this approach provides integrated Class D efficiency and flexible channel assignment, while PCB routing must keep switching-current loops compact and away from the audio input references.

🧩

Digital Media Speaker Amplifier

A networked or digital media speaker can combine an audio codec with the TAS5614PHD to create a high-power Class D output section for a smart speaker or powered cabinet. The analog-input architecture allows the codec to deliver a conventional audio waveform while the integrated closed-loop power stage handles high-current loudspeaker drive. Its 150W stereo rating supports substantially more acoustic output than a portable Class D amplifier, but it also raises system power-supply and thermal requirements. Compared with a compact portable amplifier, the design gains output headroom and speaker-impedance support at the cost of a larger heat sink, bulkier supply hardware, and more demanding EMC attention.

What is the TAS5614PHD power output?
The TAS5614PHD supports up to 150W stereo output and 300W mono output. Texas Instruments describes it as a 150W stereo and 300W mono PurePath HD power stage for driving 4 ohm to 8 ohm speakers. Its Class D output stage and integrated closed-loop feedback architecture are intended to combine high audio power with high efficiency.
Where can I download the TAS5614PHD datasheet PDF?
The official TAS5614PHD datasheet is available through the Texas Instruments product page at https://www.ti.com/product/TAS5614. Use the datasheet tab to obtain the current manufacturer PDF, including the complete pin-description table, electrical characteristics, application circuit, and thermal-layout guidance.
Where can I find the TAS5614PHD pinout?
The authoritative TAS5614PHD pinout appears in the Pin Configuration and Pin Functions sections of the manufacturer datasheet. The device uses a 64-pin HTQFP package, so assign PCB tracks directly from the datasheet pin table and include the exposed-pad thermal and electrical requirements in the land pattern.
What is the TAS5614PHD package?
The TAS5614PHD is packaged in a 64-pin HTQFP measuring 14 x 14 mm. Distributor listings consistently identify the 64-pin HTQFP package, and the exposed heatslug must be thermally connected to a heat sink through a suitable thermal interface material when operating at high output power.
Is the TAS5614PHD a digital-input or analog-input amplifier?
The TAS5614PHD is an analog-input Class D power amplifier with integrated PurePath HD closed-loop feedback. Although some marketplace listings use broad digital-input power-stage wording, the manufacturer description identifies the TAS5614 as a high-performance analog-input Class D amplifier.
What speakers can the TAS5614PHD drive?
The TAS5614PHD is specified for 4 ohm to 8 ohm stereo speakers and can also be configured for 300W mono operation. The manufacturer states that it can drive 4 ohm to 8 ohm speakers from a single 36V supply, making it suitable for compact powered speakers, AV receivers, and professional audio power stages.
What is the TAS5614PHD supply voltage range?
The published TAS5614PHD supply range is 18V to 38V, with operation from a single 36V supply highlighted for high-power stereo applications. A published 10.8V to 13.2V supply condition also appears in component listings. Use the manufacturer electrical-characteristics table to confirm the applicable operating mode and thermal limits.
Does the TAS5614PHD need a heat sink?
Yes, a properly sized heat sink is required for reliable high-power operation. Texas Instruments specifies a high-performance thermal interface material between the exposed heatslug and the heat sink. The final heat-sink selection should be based on the actual channel configuration, supply voltage, output power, ambient temperature, and PCB thermal path.
What is the best drop-in replacement for TAS5614PHD?
The closest same-family candidate identified is the TAS5613PHD, but it is not a confirmed drop-in replacement because its channel and power ratings differ from the TAS5614PHD. Confirm the 64-pin footprint, pin functions, supply limits, output-filter requirements, and thermal performance in the manufacturer datasheets before treating any substitute as interchangeable.
Can TAS5613PHD replace TAS5614PHD?
TAS5613PHD is a related TI audio power-stage family member, but it should not be treated as an automatic replacement. Power-stage ICs can differ in PWM architecture, control-interface details, filter design, pin mapping, and protection behavior even within one family. Verify each pin function and the complete application schematic before approving a substitution.
TAS5614PHD vs TAS5613PHD: which is better for a 150W stereo design?
Choose the TAS5614PHD for the stated 150W stereo or 300W mono design target. The TAS5613PHD belongs to the same TI power-stage family but is listed in comparison tools as a distinct device. Select it only when its own datasheet confirms the required output power, supply range, speaker impedance, pin compatibility, and system control requirements.
TAS5614PHD vs TAS5612PHD: which power stage fits a stereo amplifier?
The TAS5614PHD provides the documented 150W stereo capability and supports 300W mono operation, while the TAS5612PHD is a lower-power family member. The TAS5614PHD is the appropriate choice when the amplifier design requires its 150W stereo rating and 4 ohm to 8 ohm speaker capability; do not interchange the devices without reviewing both datasheets.
When should I choose TAS5614PHD instead of a smaller Class D power stage?
Choose the TAS5614PHD when the design must deliver approximately 150W stereo or 300W mono into 4 ohm to 8 ohm speakers. A smaller Class D stage is preferable for lower-power portable or consumer products because it reduces heat-sink size, supply requirements, and system cost, but it cannot meet the TAS5614PHD output-power target.
Is TAS5614PHD suitable for a professional power amplifier?
The TAS5614PHD is suitable for the output stage of a professional or high-power audio amplifier because it combines 150W stereo and 300W mono capability with PurePath HD feedback. It requires a separate heat sink, a defined PCB thermal path, input filtering, and power-supply design that accommodates its 18V to 38V supply range.
Where can I buy TAS5614PHD and check the current lead time?
Use the Request a Quote form on this page to request TAS5614PHD pricing, current stock position, and a lead-time quotation from XAIPART. Because distributor inventory and component lead times change frequently, request the current commercial commitment for the exact 64-pin HTQFP ordering code rather than relying on an old catalog quantity.

工程参考数据: TAS5614PHD ——对比、设计指导和合规信息。

选型指南

Choose the TAS5614PHD when the amplifier must deliver 150W stereo or 300W mono into 4 ohm to 8 ohm speakers from a single high-voltage supply. Its integrated PurePath HD feedback and exposed-heat-sink package make it a strong choice for powered speakers, AV amplifiers, and professional power modules where thermal design can be handled properly. Consider the TAS5613PHD only after confirming that its lower power rating still satisfies the design and that every pin and filter function matches. Choose the TAS5612PHD for systems requiring less output power and lower supply complexity. None of these family members should be substituted solely because the family name is similar: verify the complete pin list, electrical limits, control interface, PWM or filter architecture, and thermal conditions in the manufacturer documentation before releasing a new PCB.

与替代料对比

参数 本产品 TAS5613PHD TAS5612PHD
Package 64-pin HTQFP (14 x 14 mm) 64-pin HTQFP (14 x 14 mm) - verify land pattern in datasheet 64-pin HTQFP (14 x 14 mm) - verify land pattern in datasheet
Brand Texas Instruments Texas Instruments Texas Instruments
Product Type Stereo or mono Class D audio power stage Class D audio power stage Class D audio power stage

关键差异点

  • Higher documented stereo and mono output capability within the TI power-stage family (对比 TAS5613PHD)
  • Designed for high-power speaker drive from a single supply (对比 TAS5612PHD)
  • Integrated PurePath HD closed-loop feedback (对比 TAS5613PHD)

设计说明

The exposed heatslug is not optional at high output power. Texas Instruments recommends a high-performance thermal interface material between the package heatslug and the heat sink. Estimate: at 24V supply, 150W stereo output, and approximately 85% Class D efficiency, total output-stage loss is about 26.5W, or roughly 13.2W per channel. Confirm the estimate against the device efficiency curve and size the heat sink for the actual ambient temperature and enclosure airflow.

Treat the Class D power stage as a high-current switching design even though its audio input is analog. Keep input, gain-control, and feedback-routing tracks away from output-current loops and the exposed-pad area. Place input filtering and support components close to their associated pins, and follow the manufacturer layout example for thermal-via placement, power-stage grounding, and supply decoupling.

The 18V to 38V supply range and 300W mono capability require a power source with low ripple, adequate transient response, and correctly rated bulk and local decoupling. Do not calculate the supply from output power alone; include the Class D efficiency, speaker impedance, filter losses, and standby or idle consumption. The 36V single-supply operating point is appropriate for the stated high-power configuration, but the complete power tree must remain within the device's absolute limits.

A Class D output stage radiates switching energy, so filter selection and return-current geometry determine EMI performance. Use the manufacturer's recommended LC output filters, keep the switching loop compact, and connect filter components to the quiet power-stage ground reference rather than the chassis or a high-current output ground. Validate radiated and conducted emissions at the finished-product level because the complete enclosure, cable shield, speaker wiring, and power supply affect the result.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance attributes require confirmation from the current Texas Instruments product page or the manufacturer declaration for the exact ordering code.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

TAS5614PHD datasheet TAS5614PHD pinout TAS5614PHD datasheet pdf TAS5614PHD equivalent TAS5614PHD replacement TAS5614PHD cross reference TAS5614PHD vs TAS5613PHD TAS5614PHD vs TAS5612PHD TAS5614PHD 64 pin HTQFP TAS5614PHD application circuit TAS5614PHD 150W stereo TAS5614PHD 300W mono Texas Instruments TAS5614PHD TAS5614PHD price TAS5614PHD stock

相关元器件 & 术语

Texas Instruments TAS5614 TAS5614PHD TAS5613PHD TAS5612PHD PurePath HD Class D amplifier audio power amplifier IC power management semiconductor analog input closed-loop feedback 150W stereo 300W mono 18V to 38V supply 4 ohm speaker 8 ohm speaker 64-pin HTQFP 14 x 14 mm package exposed heatslug thermal interface material powered speaker home theater amplifier professional audio power stage subwoofer amplifier Class D output filter
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情