Texas Instruments

THS3125ID - 120MHz High-Output-Current Amplifier | Texas Instruments

MPN: THS3125ID ✓ Hoạt động
±5 V to ±15 V Vdss 450 mA Id 14-SOIC (0.154 inch, 3.90 mm width) Package
MOQ: 1 |

THS3125ID Tóm tắt

The Texas Instruments THS3125ID is a dual high-speed current-feedback operational amplifier rated for 120 MHz operation, high output current, and low-noise signal conditioning in a 14-SOIC package. The device operates from ±5 V to ±15 V supplies, draws as little as 7.2 mA per channel, and supports a shutdown mode that reduces supply current to 370 µA.

A current-feedback operational amplifier is a voltage-input amplifier whose closed-loop bandwidth and gain relationship differ from that of a conventional voltage-feedback amplifier. The THS3125 family belongs to the operational-amplifier hierarchy, where current-feedback amplifiers provide high-speed performance and strong drive capability for demanding analog systems. Its combination of wide bandwidth, high output current, and dual-channel integration makes it suitable for signal chains requiring both bandwidth and load-driving capability.

The primary features include two amplifier channels in one package, a 120 MHz gain-bandwidth product, operation from ±5 V to ±15 V, and a shutdown function. A distributor specification identifies the amplifier as a 450 mA current-feedback device, while another listing describes the THS3125ID variant with approximately 440 mA output current and a 1550 V/µs slew rate. Designers should use the manufacturer datasheet limits for the exact operating conditions before finalizing a design.

The current-feedback architecture is particularly useful in line-driver, motor-driver, and piezo-driver applications. Unlike a voltage-feedback amplifier, it can maintain useful high-frequency behavior at relatively low closed-loop gains, although the feedback resistor selection remains important. The shutdown feature provides a low-current operating state when the system does not need active amplification, helping reduce supply demand in portable or intermittently active equipment.

Typical applications include high-speed line drivers, motor drivers, piezo drivers, video-signal interfaces, and industrial control or instrumentation requiring a high-current output stage. The dual configuration reduces board area when two channels are needed, while the 14-SOIC package supports conventional surface-mount assembly. Supply bypassing, feedback-component placement, and output-load stability require careful layout.

For a new design, verify the required gain, output-voltage swing, load current, and supply voltage against the datasheet before assigning resistors or external passives. The shutdown pin must be driven to the proper logic level, and unused amplifier channels should be configured according to the manufacturer's recommended termination and biasing arrangement.

This product page consolidates the manufacturer specifications, package information, sourcing parameters, replacement guidance, comparison criteria, and practical application notes needed to evaluate the THS3125ID before committing a high-speed analog design to PCB implementation.

Bộ thay thế dễ dàng lắp đặt cho THS3125ID — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với THS3125ID (cùng hình factor và footprint) — khác nhau ở Amplifier Type, Gain-Bandwidth Product, Package.

Texas Instruments
Amplifier Type: Dual current-feedback amplifier
Gain-Bandwidth Product: 110 MHz
Package: 8-SOIC, 0.154 inch (3.90 mm) body width
So sánh với THS3125ID →

THS3115ID

✅ Drop-In
Texas Instruments
📦 14-SOIC
Current-feedback operational amplifier · 2 channels · 110 MHz · 2.9 pA/√Hz · 10.8 pA/√Hz · 300 µA per channel · Yes, low-power shutdown · 14-pin SOIC (D), 3.90 mm width

Liên hệ để biết giá

Xem tài liệu →

THS3122IP

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 14-SOIC
Same THS312x family and 14-SOIC package, but no shutdown function; supply, bandwidth, and drive ratings differ

📋 Tham chiếu thay thế (không có trong danh mục)

THS3121IP

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 14-SOIC
Same THS312x family and 14-SOIC package, but shutdown and electrical ratings differ from THS3125ID

📋 Tham chiếu thay thế (không có trong danh mục)

THS3125ID Tỷ lệ tối đa & tính chất điện

Amplifier Type Current-feedback operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 120 MHz
Điện áp tối đa đầu ra 450 mA
Output Current for THS3125ID 440 mA
Slew Rate 1550 V/µs
Supply Voltage Range ±5 V to ±15 V
Supply Current per Channel 7.2 mA
Shutdown Supply Current 370 µA
Shutdown Function Yes
Khoảng nhiệt độ hoạt động -40°C to 85°C
Hộp 14-SOIC (0.154 inch, 3.90 mm width)
Kiểu lắp đặt Surface mount
Total Harmonic Distortion -75 dBc at 8 VPP

Hướng dẫn cấu hình chân THS3125ID 14-soic (0.154 inch, 3.90 mm width)

Cấu hình chân cho THS3125ID (14-soic (0.154 inch, 3.90 mm width) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 14-soic (0.154 inch, 3.90 mm width) cho THS3125ID

Không có dữ liệu chân cụ thể sẵn có cho THS3125ID.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

THS3125ID phù hợp cho 6 Áp dụngs: High-Speed Line Driver, Motor Drive Signal Conditioning, Piezo Driver Interface, Video Signal Interface, Industrial Instrumentation, Portable High-Speed Interface.

🌐

High-Speed Line Driver

The THS3125ID suits high-speed line-driver circuits because the dual current-feedback amplifiers provide a 120 MHz family bandwidth with high output-current capability in a 14-SOIC package. The high-drive output can support low-impedance or terminated lines more effectively than a conventional low-current op amp. Design the feedback network around the current-feedback topology, use short output paths, and verify the output swing at the actual load. Shutdown can reduce supply demand when the driven line must be inactive.

🏭

Motor Drive Signal Conditioning

The THS3125ID can condition position, current, and feedback signals in motor-control systems while providing the high output drive required by downstream stages. Its dual architecture supports two independent control or sensing channels, and the 120 MHz bandwidth preserves fast edges. The family is also identified for motor-driver use, supporting operation with bipolar supplies from ±5 V to ±15 V. Validate output swing, load current, stability, and thermal behavior against the motor-driver circuitry and protection network.

🔧

Piezo Driver Interface

For piezo positioning and ultrasonic-drive systems, the THS3125ID combines a 120 MHz family bandwidth with approximately 440 mA listed output-current capability for the exact suffix. This combination helps preserve fast drive waveforms across capacitive loads. The shutdown function can place the amplifier in a 370 µA low-current state when the actuator is idle. Because piezo loads are capacitive, include current limiting and output protection, and confirm oscillation and stability with the complete feedback and load network.

📺

Video Signal Interface

The THS3125ID can serve as a high-speed dual video-buffer or line-interface stage where 120 MHz bandwidth and strong output drive are more important than very low offset or bias-current performance. The two channels reduce the number of active devices needed for paired video paths, while the shutdown input offers a way to disable amplification when required. Keep feedback traces short, provide local supply bypassing, and verify output amplitude, load impedance, and settling behavior with the selected video standard.

🖥️

Industrial Instrumentation

The THS3125ID fits instrumentation front ends that need wide bandwidth and the ability to drive downstream analog circuitry without adding separate buffer stages. Its dual-channel configuration can handle complementary or sequential signal paths, and the 120 MHz family bandwidth supports fast transient capture and control signals. The -40°C to 85°C operating range covers industrial environments, while shutdown can reduce consumption during idle measurement cycles. Validate noise, offset, stability, and output accuracy for the required measurement bandwidth.

📱

Portable High-Speed Interface

The THS3125ID can support a compact dual-channel interface in portable or intermittently powered equipment because each channel draws as little as 7.2 mA and shutdown reduces supply current to 370 µA. Its 14-SOIC package simplifies surface-mount assembly while retaining high bandwidth and strong drive capability. Account for the added heat generated when driving low-impedance loads, use local decoupling on both supplies, and ensure the shutdown control remains in a defined state during startup and power-loss events.

Tóm tắt các sản phẩm được đề xuất

THS3115ID Texas Instruments Được sử dụng trong: High-Speed Line Driver, Motor Drive Signal Conditioning, Video Signal Interface, Industrial Instrumentation, Portable High-Speed Interface THS3122IP Related THS312x current-feedback amplifier family member Được sử dụng trong: High-Speed Line Driver, Piezo Driver Interface, Video Signal Interface, Industrial Instrumentation, Portable High-Speed Interface THS3125ID Texas Instruments Được sử dụng trong: Motor Drive Signal Conditioning THS3121IP Related THS312x package and drive-family alternative Được sử dụng trong: Piezo Driver Interface
What is the operating voltage of THS3125ID?
The THS3125ID operates from ±5 V to ±15 V. According to the Texas Instruments THS3125 product page and family datasheet, this dual current-feedback amplifier is designed for bipolar analog supplies in that range. Check each supply pin against the absolute-maximum and common-mode limits in the manufacturer datasheet before operation. The 14-SOIC THS3125ID is intended for surface-mount assembly, and its shutdown circuitry allows the device to enter a low-current state when amplification is not required.
What are the key specifications of THS3125ID that engineers should know?
The THS3125ID is a dual, 120 MHz current-feedback amplifier with high output-current capability in a 14-SOIC package. The Texas Instruments THS3125 family operates from ±5 V to ±15 V and consumes as little as 7.2 mA per channel. Its shutdown current is 370 µA, while distributor technical summaries identify approximately 440 mA output current and a 1550 V/µs slew rate for this suffix. The package is identified as 14-SOIC with a 3.90 mm body width.
What is THS3125ID used for?
The THS3125ID is used for high-speed analog signal conditioning requiring substantial output-drive capability. Texas Instruments identifies the family for line drivers, motor drivers, and piezo drivers, while its 120 MHz bandwidth also supports video and instrumentation signal paths. Two amplifiers are integrated into each 14-SOIC device. Selection should account for the current-feedback topology, because feedback-resistor values and gain behavior differ from those of a conventional voltage-feedback amplifier.
What is the bandwidth of THS3125ID?
The THS3125ID has a nominal 120 MHz gain-bandwidth product according to the Texas Instruments product page and family datasheet. A distributor summary also describes the exact THS3125ID suffix as a 160 MHz device, so engineers should treat the family specification and exact-orderable data carefully. Before setting signal bandwidth for a design, use the manufacturer datasheet gain, output-voltage, load, and supply-current curves because current-feedback amplifiers do not follow the same bandwidth-versus-gain relationship as voltage-feedback amplifiers.
How much output current can THS3125ID deliver?
The THS3125 family is identified as a 450 mA current-feedback amplifier, and a technical listing for THS3125ID states approximately 440 mA output current. These figures describe different levels of characterization in the available listings, so the manufacturer datasheet should govern the final design. Output-current capability also depends on supply voltage, output voltage, channel loading, thermal conditions, and the DC or AC nature of the load.
Where to download the THS3125ID datasheet PDF?
The official THS3125 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/THS3125. The manufacturer product page at https://www.ti.com/product/THS3125 provides ordering, quality, and parameter information for the device family. Use the manufacturer PDF for electrical characteristics, pin assignments, application guidance, and package drawings. The search listing describing THS3125ID as a 20-page document should not be treated as the authoritative source.
Where can I find the THS3125ID pinout?
The THS3125ID pinout is contained in the pin-configuration section of the official Texas Instruments THS3125 datasheet. The exact orderable device uses a 14-SOIC package with a 3.90 mm body width. Assign PCB nets from the manufacturer pin table rather than inferring connections from a generic operational-amplifier diagram, because supply, shutdown, feedback, and output pins must follow the exact THS3125 configuration.
Where can I buy THS3125ID online?
Use the Request a Quote form on this page to request THS3125ID availability, current pricing, and order handling from XAIPART. The request should include the required quantity, target package, and shipment destination. Distributor listings indicate that the part has inventory in at least one channel, but stock levels can change quickly. The form provides a direct way to obtain a current commercial quotation without relying on a potentially stale listing.
What is the price of THS3125ID?
The current price of THS3125ID should be obtained through the Request a Quote form on this page. Pricing depends on quantity, order schedule, and market conditions, so a static listing figure can become obsolete quickly. The manufacturer part number THS3125ID and its 14-SOIC package should be stated in the request to avoid mismatching another member of the THS3125 family or a different temperature grade.
What is the lead time for THS3125ID?
Request the current THS3125ID lead time through the Request a Quote form on this page. One distributor listing states that the device can ship immediately and displays an estimated delivery window, but delivery conditions and inventory can change after the listing was captured. Include your required quantity and destination when requesting a quotation so the response reflects the actual order and logistics rather than a historical listing estimate.
Is THS3125ID in stock?
THS3125ID inventory has been reported by at least one distributor, but stock is not constant and the Request a Quote form on this page is the appropriate way to confirm availability for a specific order quantity. State the required quantity, production schedule, and shipment destination in the request. The device is listed in a 14-SOIC package, so confirm that the quoted line uses the exact THS3125ID suffix and not another package or temperature option.
What is the best drop-in replacement for THS3125ID?
THS3125ID and THS3115ID are the closest documented alternatives found for the same 14-SOIC format, but they should not be treated as automatically interchangeable. The THS3115ID differs in output-drive capability, and the manufacturer datasheets must be compared for bandwidth, slew rate, supply range, shutdown behavior, pin functions, and output swing. Confirm every connection and timing requirement on the original schematic before selecting a replacement.
Can THS3125ID replace THS3115ID?
THS3125ID may be considered when replacing THS3115ID because both are identified with a 14-SOIC package, but the higher-output-current THS3125ID is not a universally transparent substitution. Compare the two manufacturer datasheets for pinout, supply limits, gain-bandwidth behavior, output swing, drive current, and shutdown requirements. A PCB-level drop-in decision also requires checking whether the replacement introduces different startup, bias, or stability behavior.
What can replace THS3125ID?
THS3115ID is the most directly identified same-package replacement candidate, while other THS312x members may provide alternatives when their electrical ratings are acceptable. A valid drop-in replacement must preserve the 14-SOIC footprint, pin functions, supply range, feedback implementation, shutdown logic, and required output-current capability. Review the manufacturer pin tables and application circuits before assigning any substitute; frequency and package alone do not establish drop-in compatibility.
THS3125ID vs THS3115ID - which is better for a line-driver application?
THS3125ID is generally the stronger choice when a line driver must source or sink substantially more current, because the family is characterized for high output-current operation and a listing identifies approximately 440 mA for this suffix. THS3115ID may be appropriate when lower drive demand and its particular cost, supply, and bandwidth characteristics are preferable. The final comparison must use the manufacturer limits for output swing, drive into the actual load, distortion, thermal conditions, and stability.
When should I choose THS3125ID over another dual high-speed amplifier?
Choose THS3125ID when the design needs two channels, approximately 120 MHz family bandwidth, high output-drive capability, and low-power shutdown in a 14-SOIC package. It is particularly relevant to line, motor, piezo, video, and instrumentation drivers. Choose a lower-drive amplifier only when the load and output swing permit it, or a different family when supply range, gain-bandwidth behavior, noise, or pin configuration is more important than current-drive capability.
Is THS3125ID suitable for motor-driver and piezo-driver applications?
Yes, the Texas Instruments THS3125 family is specifically identified for motor-driver and piezo-driver applications. Its high output current and slew rate are valuable when driving capacitive, nonlinear, or reactive loads, while the 120 MHz bandwidth supports high-speed control waveforms. The amplifier still requires careful feedback design, supply bypassing, grounding, and load protection; verify output swing and thermal limits for every operating point.
What is the best Texas Instruments equivalent for THS3125ID?
THS3115ID is the closest identified alternative because it is compared directly with THS3125ID and also uses a 14-SOIC package, while THS3122 belongs to the related high-speed current-feedback family. Neither should be selected solely from package information. Verify pin compatibility, shutdown behavior, output-current capability, supply range, feedback resistor recommendations, and the required signal bandwidth against the manufacturer datasheets.

Dữ liệu tham khảo kỹ thuật cho THS3125ID — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose THS3125ID for a two-channel high-speed design that needs substantial output drive, particularly for line, motor, piezo, video, or instrumentation interfaces. Its 120 MHz family bandwidth, approximately 440 mA listed output current for the exact suffix, and 370 µA shutdown state make it appropriate when both high speed and controllable low-power operation matter. Select THS3115ID when its lower-drive characteristics are acceptable and its other ratings provide a better fit. Consider THS3122IP only when its lack of shutdown is acceptable and its electrical limits meet the design. Before approving any replacement, compare pin functions, feedback requirements, output swing, load stability, supply range, and shutdown logic in the manufacturer datasheets; a shared 14-SOIC package alone does not guarantee transparent interchangeability.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này THS3115ID THS3122IP THS3121IP
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Channels 2 2 2 2

Bảo phân biệt quan trọng

  • Higher output-drive capability within the compared package options (vsTHS3115ID)
  • Integrated shutdown control (vsTHS3122IP)
  • Dual-channel integration in a standard 14-SOIC package (vsTHS3121IP)

Ghi chú thiết kế

Place the feedback resistor and feedback capacitor directly between the amplifier output and inverting input, and keep the inverting-input node physically short. Current-feedback amplifiers are sensitive to parasitic capacitance at the summing node because excess capacitance can alter gain and encourage instability. Route the output away from the feedback and input nodes, use a compact ground return, and avoid long traces beneath or beside high-speed input and feedback paths.

Use local high-frequency decoupling on each supply pin and place the capacitors close to the device rather than at the connector or regulator. Separate the supply-current return path from sensitive input grounding where practical. Because the amplifier can dissipate substantial heat while driving a low-impedance load, estimate conduction and crossover losses using the actual output waveform, supply voltage, load resistance, and duty cycle. Confirm the resulting junction temperature against the manufacturer rating.

Do not assume that a conventional voltage-feedback amplifier's resistor values will work with the THS3125ID. Select feedback components according to the manufacturer's current-feedback application guidance and the intended gain. Also, verify that the shutdown logic remains compatible with the system control sequence. The 370 µA shutdown figure is a low-power state, not a guarantee that every external node becomes electrically safe or that the outputs immediately reach a defined state.

Analyze the complete output network rather than only the amplifier gain. Cable capacitance, input capacitance, connector inductance, and load impedance can change bandwidth and stability. For long or high-speed interconnects, use controlled-impedance routing, minimize stub lengths, and place suitable termination close to the receiving device. Evaluate rise time and overshoot with the actual source, amplifier, and load combination before treating the nominal 120 MHz bandwidth as usable system bandwidth.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No explicit compliance declarations were identified for THS3125ID. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current Texas Instruments product and quality documentation before regulatory submission.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

THS3125ID datasheet THS3125ID pinout THS3125ID datasheet pdf THS3125ID specifications THS3125ID 120 MHz THS3125ID 14 SOIC THS3125ID equivalent THS3125ID replacement THS3125ID vs THS3115ID Texas Instruments THS3125ID THS3125ID price THS3125ID stock THS3125ID high output current amplifier THS3125ID line driver THS3125ID motor driver

Các bộ phận và thuật ngữ liên quan

Texas Instruments THS3125ID THS3125 THS3115ID THS3122IP THS3121IP current-feedback amplifier operational amplifier high-speed amplifier dual amplifier 120 MHz gain-bandwidth product 450 mA output current 1550 V/µs slew rate shutdown function 14-SOIC SOIC package family surface-mount package line driver motor driver piezo driver video signal interface industrial instrumentation power-supply rejection RoHS REACH
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ