Texas Instruments

TMS320C44GFW50 - 50 MHz Floating-Point DSP | TI

MPN: TMS320C44GFW50 ✓ Hoạt động
388-BGA Package 50 MHz Speed 6 channels Memory
MOQ: 1 |

TMS320C44GFW50 Tóm tắt

Texas Instruments TMS320C44GFW50 is a 50 MHz floating-point digital signal processor with a 32-bit architecture and 8192 RAM words, packaged in a 388-ball BGA measuring 35 x 35 mm. It is designed for parallel signal-processing workloads that require floating-point arithmetic, direct-memory-access support, and multiple communication paths within one processor package.

A digital signal processor is a programmable semiconductor optimized for mathematical operations on continuously arriving data. Unlike a general-purpose microprocessor, a DSP architecture typically combines parallel arithmetic units, dedicated memory pathways, and high-bandwidth communication peripherals. In the product hierarchy, the TMS320C44 belongs to the Texas Instruments C4x family of floating-point digital signal processors, alongside processors and controllers in the broader digital signal processing and embedded semiconductor markets.

The device operates at 50 MHz and supports floating-point processing through a 32-bit architecture. Its four communication ports provide dedicated links for moving data between the processor, memory, and external systems, while its six-channel direct-memory-access architecture supports high-throughput transfers. The processor includes 8192 RAM words, and the stated -40 °C to +85 °C operating range supports industrial and extended-temperature equipment designs.

The 388-BGA package concentrates the processor, memory interfaces, communication ports, and associated signal lines into a dense surface-mount footprint. This makes TMS320C44GFW50 suitable for compact embedded systems where parallel processing and communication bandwidth matter more than package simplicity. The 35 x 35 mm land pattern also demands careful PCB routing, layer-stack planning, and thermal assessment.

Typical applications include digital audio processing, industrial vibration analysis, communications signal processing, imaging and video acceleration, control systems, and embedded instrumentation. Its floating-point arithmetic is particularly useful when algorithms require wide dynamic range without implementing multiword fixed-point scaling. Communication ports and direct-memory-access channels can support high-throughput sensor, transceiver, and memory traffic when the board-level architecture is designed around those data paths.

System designers should allocate the 388-ball footprint carefully, validate multilayer routing rules, and confirm external-memory timing before layout release. Although the 50 MHz processor clock supports demanding workloads, real-time performance depends on memory access patterns, peripheral utilization, bus contention, and the implementation quality of the signal-processing firmware.

This product record combines the exact 50 MHz, 388-BGA, 32-bit, 8192-RAM-word, and temperature-range characteristics with same-family alternatives, application guidance, PCB design notes, and a parameter comparison. It is intended to accelerate component selection and engineering review while preserving the need for datasheet-level validation before a production design is released.

Bộ thay thế dễ dàng lắp đặt cho TMS320C44GFW50 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TMS320C44GFW50 (cùng hình factor và footprint) — khác nhau ở Architecture, Instruction Cycle Time, Operating Temperature Range, Package Type.

Texas Instruments
Architecture: 32-bit DSP architecture
Instruction Cycle Time: 33 ns
Operating Temperature Range: 0 C to 85 C
So sánh với TMS320C44GFW50 →

TMS320C44GFW40

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 388-BGA (35 x 35 mm)
Clock frequency is 40 MHz versus 50 MHz, a 20% reduction; family architecture and 388-BGA footprint are retained.

📋 Tham chiếu thay thế (không có trong danh mục)

TMS320C44GFW48

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 388-BGA (35 x 35 mm)
Clock frequency is 48 MHz versus 50 MHz, a 4% reduction; family architecture and 388-BGA footprint are retained.

📋 Tham chiếu thay thế (không có trong danh mục)

TMS320C44GFW60

✅ Drop-In ⚠️ Thông số chưa được xác minh
Texas Instruments
📦 388-BGA (35 x 35 mm)
Floating-point digital signal processor · 60 MHz · 32-bit DSP architecture · 40 bit · 60 MFLOPS · 330 MOPS · 30 MIPS · 33 ns

Liên hệ để biết giá

Xem tài liệu →

TMS320C44GFW48Z

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 388-BGA (35 x 35 mm)
Clock frequency is 48 MHz versus 50 MHz, a 4% reduction, with a distinct orderable suffix; family architecture and 388-BGA footprint are retained.

📋 Tham chiếu thay thế (không có trong danh mục)

TMS320C44GFW50 Thông số kỹ thuật

Product Type Floating-point digital signal processor (DSP)
Processor Clock Frequency 50 MHz
Architecture 32 bit
On-Chip RAM 8192 words
Package Type 388-BGA
Package Dimensions 35 x 35 mm
Package Shape Square
Terminal Count 388 balls
Kiểu lắp đặt Surface mount
Khoảng nhiệt độ hoạt động -40 °C to +85 °C
Communication Port Count 4 ports
Direct-Memory-Access Channels 6 channels
Instruction Cycle Time 40 ns at 50 MHz
Processor Family TMS320C4x
Arithmetic Type Floating-point
Terminal Form Ball
Trạng thái RoHS Unknown
REACH Status Unknown
AEC-Q100 Qualification Unknown

Hướng dẫn cấu hình chân TMS320C44GFW50 square

Cấu hình chân cho TMS320C44GFW50 (square gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân square cho TMS320C44GFW50

Không có dữ liệu chân cụ thể sẵn có cho TMS320C44GFW50.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

TMS320C44GFW50 phù hợp cho 6 Áp dụngs: Digital Audio Processing, Industrial Vibration Analysis, Communications Signal Processing, Image and Video Acceleration, Precision Control Systems, Test and Measurement Instrumentation.

🎧

Digital Audio Processing

The TMS320C44GFW50 fits digital audio processing because its 50 MHz floating-point architecture handles filters, mixing, equalization, and dynamic-range workloads without the scaling constraints of narrow fixed-point formats. Four communication ports can support serialized audio paths or control traffic, while six direct-memory-access channels can move sample data efficiently. The key design consideration is timing: the 40 ns instruction cycle must be reconciled with external-memory latency and audio-stream deadlines in the finished signal chain.

🏭

Industrial Vibration Analysis

The TMS320C44GFW50 is appropriate for industrial vibration and condition-monitoring equipment that must analyze multiple sensor channels in real time. Its six direct-memory-access channels support concurrent acquisition paths, while the 32-bit floating-point architecture simplifies spectral transforms and adaptive-filter calculations. Four communication ports allow sensor, host, and network data to be separated physically. Deployment from -40 °C to +85 °C supports extended-temperature equipment, although enclosure heating, EMC isolation, and safety controls must be engineered at the system level.

🌐

Communications Signal Processing

The TMS320C44GFW50 supports communications signal-processing designs requiring deterministic parallel arithmetic and high-throughput data movement. Its four communication ports can connect multiple independent data paths, while six direct-memory-access channels reduce processor involvement in bulk transfers. At 50 MHz with a 40 ns instruction cycle, the device is suited to filtering, modulation, correlation, and spectral analysis. External-interface timing must be checked carefully because memory latency and peripheral arbitration can become the practical performance limiters.

📺

Image and Video Acceleration

The TMS320C44GFW50 can accelerate selected image and video processing stages where floating-point arithmetic and parallel data movement are valuable. Six direct-memory-access channels can service frame buffers, sensor data, and intermediate results, while four communication ports provide links to capture or display subsystems. The processor's 32-bit floating-point format supports algorithms with broad dynamic range. Developers should partition the workload so that transfers overlap computation and should verify bandwidth against the external-memory configuration before assuming real-time frame rates.

⚡

Precision Control Systems

The TMS320C44GFW50 is suitable for embedded control systems that combine feedback-loop computation with sensor and actuator data handling. The floating-point architecture simplifies control-law implementation, and the four communication ports can isolate real-time control traffic from slower supervisory exchanges. Six direct-memory-access channels help maintain sample flow without excessive processor overhead. The design must account for deterministic interrupt latency, peripheral contention, and the difference between the nominal 50 MHz clock and worst-case timing behavior across voltage and temperature.

🔧

Test and Measurement Instrumentation

The TMS320C44GFW50 can serve as the processing core in measurement instruments that perform filtering, calibration, spectral analysis, and real-time correction. Its 50 MHz clock provides useful arithmetic throughput, and the 8192 RAM words offer on-chip working memory for buffering and intermediate results. Four communication ports support instrument-bus, host, and peripheral connections, while direct-memory-access channels accelerate acquisition data movement. For precision measurement, engineers should account for analog front-end noise, grounding, clock accuracy, and deterministic memory latency.

Tóm tắt các sản phẩm được đề xuất

TMS320C44GFW60 Texas Instruments Được sử dụng trong: Digital Audio Processing, Industrial Vibration Analysis, Communications Signal Processing, Image and Video Acceleration, Precision Control Systems, Test and Measurement Instrumentation TMS320C44GFW48 Same-family processor option with a 48 MHz clock Được sử dụng trong: Digital Audio Processing, Communications Signal Processing, Image and Video Acceleration, Precision Control Systems TMS320C44GFW40 Lower-clock family option for lower processing-margin workloads Được sử dụng trong: Industrial Vibration Analysis, Test and Measurement Instrumentation
What is the TMS320C44GFW50?
The TMS320C44GFW50 is a Texas Instruments 50 MHz floating-point digital signal processor with a 32-bit architecture, 8192 RAM words, four communication ports, and six direct-memory-access channels. According to the manufacturer datasheet, the processor is packaged in a 388-ball BGA measuring 35 x 35 mm and is intended for high-throughput signal-processing and communications applications.
What are the key specifications of TMS320C44GFW50 that engineers should know?
The principal TMS320C44GFW50 specifications are a 50 MHz clock, 32-bit floating-point architecture, 8192 RAM words, four communication ports, and six direct-memory-access channels. According to the manufacturer datasheet, the device also has a 40 ns instruction cycle and uses a 388-ball, 35 x 35 mm BGA package. Its stated operating-temperature range is -40 °C to +85 °C.
Where can I download the TMS320C44GFW50 datasheet PDF?
The TMS320C44GFW50 datasheet PDF can be accessed through the Texas Instruments TMS320C44 document linked on this page. The manufacturer documentation describes the processor family, pinout, electrical characteristics, memory architecture, communication ports, and direct-memory-access behavior. Use the pin-description table in that document when assigning every one of the 388 BGA connections during PCB layout.
Where can I find the TMS320C44GFW50 pinout?
The TMS320C44GFW50 pinout is defined in the manufacturer TMS320C44 datasheet, which contains the 388-ball package connection table. The distributor listing identifies the package as 388-BGA at 35 x 35 mm, but its search excerpt does not reproduce ball assignments. Use the manufacturer pin-description table for exact signal names and verify the selected board revision against that table.
What is the operating temperature range of TMS320C44GFW50?
The TMS320C44GFW50 operates from -40 °C to +85 °C. This range is stated in the component specification and makes the device suitable for industrial and extended-temperature embedded processing. Temperature qualification alone does not establish automotive qualification, so an automotive design should separately confirm the required AEC-Q100 grade and production status with Texas Instruments.
What can replace the TMS320C44GFW50?
A direct replacement should retain the 388-BGA footprint, pin assignments, memory interfaces, communication ports, and software-compatible architecture. The closest identified alternatives are other speed-grade members of the TMS320C44GFW family, including TMS320C44GFW40, TMS320C44GFW48, and TMS320C44GFW60. Validate clock-dependent timing and confirm the exact pinout and peripheral configuration before treating any variant as a drop-in replacement.
Is TMS320C44GFW50 suitable for industrial signal processing?
Yes, the TMS320C44GFW50 is suitable for many industrial signal-processing applications because it combines a 50 MHz clock, floating-point arithmetic, 8192 RAM words, four communication ports, and six direct-memory-access channels. Its stated -40 °C to +85 °C range also supports extended-temperature equipment. Environmental testing, isolation, EMC design, and system qualification remain application-specific requirements.
TMS320C44GFW50 vs TMS320C44GFW60 — which is better?
The TMS320C44GFW60 is the faster of the two identified devices, operating at 60 MHz compared with the 50 MHz clock of the TMS320C44GFW50. The TMS320C44GFW50 may be preferable when its processing rate satisfies the workload and lower clock demand reduces timing headroom concerns. Both belong to the same 388-BGA TMS320C44GFW family, but firmware timing should be revalidated for either clock rate.
When should I choose TMS320C44GFW50 instead of TMS320C44GFW60?
Choose TMS320C44GFW50 when a 50 MHz processing rate provides sufficient throughput and the design benefits from avoiding the higher clock requirement of TMS320C44GFW60. The 10 MHz difference is 20% of the TMS320C44GFW60 clock and may affect real-time margins, external-memory timing, and power behavior. Select the 60 MHz variant when the workload demonstrably requires the additional processing margin.
Is TMS320C44GFW48 pin-compatible with TMS320C44GFW50?
The TMS320C44GFW48 is a same-family speed-grade option listed for the TMS320C44GFW family, but its lower clock must be checked against the original system timing. Pin compatibility should be confirmed through the manufacturer pin table and device documentation. Because clock frequency can constrain processing margin, the replacement must be validated with representative signal-processing workloads.
Where can I buy TMS320C44GFW50 and check current availability?
Use the Request a Quote form on this page to ask for TMS320C44GFW50 pricing, stock, lead time, and quantity availability. The listing search indicates that the part is commercially listed, but availability and lead time can change by order quantity and manufacturing status. Submit the target quantity, package preference, and required delivery date for a current sourcing response.
What is the price of TMS320C44GFW50?
The current TMS320C44GFW50 price depends on quantity, supply status, and delivery requirements. Request a quote through the form on this page for the unit price, volume breaks, stock allocation, and lead time applicable to your order. The price panel can then be used for a like-for-like sourcing decision against the same package and required quantity.
What is the lead time for TMS320C44GFW50?
The current lead time for TMS320C44GFW50 should be confirmed through the Request a Quote form on this page. Lead time may vary with order quantity, assembly packaging, and production scheduling. Include your required delivery date and forecast quantities so the supplier can distinguish stock allocation from scheduled replenishment for the exact 388-BGA orderable MPN.
Is TMS320C44GFW50 in stock?
Current stock for TMS320C44GFW50 is confirmed through the Request a Quote form on this page. Search listings may report inventory, but availability can change rapidly and may be limited by package quantity or production allocation. Provide the required order quantity and target date to obtain a current allocation response for the exact TMS320C44GFW50 ordering code.
What are the main PCB design challenges for TMS320C44GFW50?
The main PCB design challenges are dense 388-ball routing, external-memory timing, power integrity, thermal performance, and correct implementation of the six direct-memory-access channels. Use the manufacturer pin-description table for every connection, place decoupling and memory interfaces according to the reference design, and route sensitive or high-speed nets on appropriate layers. A multilayer stack with continuous return paths is generally preferable to forcing dense routes through additional outer layers.

Dữ liệu tham khảo kỹ thuật cho TMS320C44GFW50 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the TMS320C44GFW50 when a 50 MHz TMS320C4x processor is sufficient for the real-time workload and the system benefits from the established 388-BGA implementation. Select TMS320C44GFW60 when measurement or production testing shows that the 20% clock increase is needed for processing margin, but recheck memory and peripheral timing at 60 MHz. Choose TMS320C44GFW48 or TMS320C44GFW48Z when the algorithm completes with the slightly lower 48 MHz clock, and choose TMS320C44GFW40 only when its lower throughput is acceptable. For every alternative, verify the complete ordering code, manufacturer pin table, memory configuration, electrical limits, and firmware timing before production use.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này TMS320C44GFW40 TMS320C44GFW48 TMS320C44GFW60 TMS320C44GFW48Z
Package 388-BGA (35 x 35 mm) 388-BGA (35 x 35 mm) - same 388-BGA (35 x 35 mm) - same 388-BGA (35 x 35 mm) - same 388-BGA (35 x 35 mm) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Processor Clock Frequency 50 MHz 40 MHz 48 MHz 60 MHz 48 MHz
Architecture 32-bit floating-point 32-bit floating-point 32-bit floating-point 32-bit floating-point 32-bit floating-point
Communication Ports 4 ports 4 ports 4 ports 4 ports 4 ports
Direct-Memory-Access Channels 6 channels 6 channels 6 channels 6 channels 6 channels

Bảo phân biệt quan trọng

  • Balanced 50 MHz performance level (vsTMS320C44GFW60)
  • More processing headroom than the 40 MHz family option (vsTMS320C44GFW40)
  • Near-identical clock rate for design-compatible speed substitution (vsTMS320C44GFW48)
  • Dedicated parallel data-movement architecture (vsTMS320C44GFW48Z)

Ghi chú thiết kế

Assign all 388 BGA connections from the manufacturer pin-description table and preserve continuous ground planes beneath the device wherever the stackup permits. Separate high-speed processor, memory, and communication signals from sensitive analog inputs, and use the manufacturer reference layout for decoupling placement. The 35 x 35 mm package is large by area but extremely dense by connection count, so escape routing and simultaneous-switching-noise analysis should begin before component placement is frozen.

Build the power tree around the processor's documented supply rails and external-memory requirements rather than treating the 388-BGA as a generic low-power IC. Provide local bulk and high-frequency decoupling at the supply and ground balls, minimize loop area, and keep switching-regulator output paths away from sensitive signal inputs. Validate voltage tolerance, sequencing, startup behavior, and worst-case current against the manufacturer electrical tables before releasing power-system documentation.

Pay particular attention to external-memory timing because six direct-memory-access channels can create substantial simultaneous data traffic. Use a stackup with controlled impedance, maintain continuous reference planes, avoid stubs, and verify fly-by or topology-specific routing rules against the supported memory configuration. Simulate clock, data, and enable paths under the intended processor and memory loading rather than relying only on nominal propagation-delay estimates.

Do not treat the speed-grade suffix as the only replacement check. Confirm the complete ordering code, package drawing, ball map, supply configuration, and software initialization sequence for any TMS320C44 family substitution. A 48 MHz alternative reduces the target clock by 4%, while a 60 MHz alternative increases it by 20%; both changes can affect real-time margins even when the package and core architecture remain unchanged.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The available product excerpts identify the manufacturer, package, processor characteristics, and temperature range but do not provide component-specific environmental or automotive compliance declarations.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

TMS320C44GFW50 datasheet TMS320C44GFW50 pinout TMS320C44GFW50 datasheet pdf TMS320C44GFW50 specifications TMS320C44GFW50 equivalent TMS320C44GFW50 replacement TMS320C44GFW50 vs TMS320C44GFW60 TMS320C44GFW50 footprint TMS320C44GFW50 price TMS320C44GFW50 stock Texas Instruments TMS320C44GFW50 TMS320C44GFW50 industrial DSP

Các bộ phận và thuật ngữ liên quan

Texas Instruments TMS320C44GFW50 TMS320C44GFW40 TMS320C44GFW48 TMS320C44GFW60 TMS320C44GFW48Z TMS320C4x digital signal processor DSP floating-point processor embedded processor semiconductor direct memory access DMA communication port parallel processing external memory 388-BGA BGA package family surface-mount package 35 x 35 mm package industrial signal processing digital audio processing communications signal processing
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ