TPS53315 - 12A D-CAP Buck Regulator | Texas Instruments
MPN: TPS53315RGFR ✓ Hoạt độngTPS53315RGFR Tóm tắt
A buck converter is a type of switching DC-DC regulator that efficiently reduces a higher voltage to a lower one. The TPS53315 belongs to the synchronous buck family, using both high-side and low-side MOSFETs for high efficiency, and sits within the broader power management IC hierarchy for point-of-load conversion.
Key features include 12-A continuous output current, integrated 19-mOhm high-side and 7-mOhm low-side MOSFETs that minimize conduction losses, an accurate 1% 0.6-V reference, and an integrated boost switch that removes the external bootstrap diode. D-CAP control delivers fast load transient response without external compensation and is stable with ceramic output capacitors.
Technically, the proprietary D-CAP architecture combines constant on-time control with adaptive on-time, enabling low output ripple and fast transient behavior. Overcurrent protection, thermal shutdown, and a power-good indicator improve system robustness. The exposed-pad VQFN package provides thermal performance around 25 C/W junction-to-ambient per internal data.
Typical applications include point-of-load power for FPGAs, ASICs, and DSPs, as well as server, storage, networking, industrial, and telecom power rails where high efficiency and small size matter.
Design tip: use at least 2 x 22 uF ceramic output capacitance for stability and pay careful attention to PCB layout of the power stage and exposed pad for thermal dissipation.
Bộ thay thế dễ dàng lắp đặt cho TPS53315RGFR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TPS53319
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TPS53314
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TPS51315
⚡ Đồng gói📋 Tham chiếu thay thế (không có trong danh mục)
IR3889MTRPBF
⚡ Đồng gói ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →TPS53315RGFR Tỷ lệ tối đa & tính chất điện
| Cấu trúc | Synchronous Step-Down (Buck) with D-CAP control |
| Điện áp tối đa đầu ra | 12 A |
| Supply Voltage Range | 4.5 V to 25 V |
| Conversion Input Voltage Range | 3 V to 15 V |
| Khoảng điện áp đầu ra | 0.6 V to 5.5 V (adjustable) |
| Reference Accuracy | 1% |
| Điện áp tham chiếu | 0.6 V |
| High-Side MOSFET RDS(on) | 19 mOhm |
| Low-Side MOSFET RDS(on) | 7 mOhm |
| Số lượng đầu ra | 1 |
| Control Mode | D-CAP (adaptive constant on-time) |
| Integrated Boost Switch | Yes |
| Protections | Overcurrent, thermal shutdown, power-good indicator |
| Nhiệt độ hoạt động | -40C to +85C |
| Hộp | 40-VFQFN exposed pad, 5 mm x 7 mm (RGF) |
| Thermal Resistance (JA) | 25 C/W |
| Minimum Output Capacitance | 2 x 22 uF ceramic |
| Kiểu lắp đặt | Surface Mount |
Hướng dẫn cấu hình chân TPS53315RGFR 40-vfqfn exposed pad, 5 mm x 7 mm (rgf)
Cấu hình chân cho TPS53315RGFR (40-vfqfn exposed pad, 5 mm x 7 mm (rgf) gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho TPS53315RGFR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TPS53315RGFR phù hợp cho 6 Áp dụngs: FPGA / ASIC Point-of-Load Power, Server and Datacenter Power, Networking Equipment, Industrial Control Systems, Telecom Power Distribution, Test and Measurement Instruments.
FPGA / ASIC Point-of-Load Power
The TPS53315 fits FPGA and ASIC point-of-load rails because its 12-A continuous current and 0.6-V to 5.5-V adjustable output cover both core and I/O voltage needs, while the 1% 0.6-V reference supports tight core-voltage tolerance windows. Its D-CAP adaptive constant-on-time control reacts to FPGA load steps within microseconds without external compensation, minimizing droop on high di/dt cores. Placed downstream of a 12-V intermediate bus with 2 x 22 uF ceramic output capacitance, it supplies a clean core rail; ensure PCB copper area on the exposed pad to dissipate losses in the 19-mOhm and 7-mOhm integrated FETs at full load.
Được đề xuất
Server and Datacenter Power
In servers, storage, and datacenter boards, dense point-of-load converters must deliver high current in minimal area. The TPS53315's integrated 19-mOhm/7-mOhm MOSFETs and 5 mm x 7 mm VQFN reduce BOM count and PCB footprint versus a discrete controller-plus-FET design, while D-CAP control maintains regulation through CPU, memory, and NIC load transients. Its 4.5-V to 25-V supply range accepts common 12-V intermediate bus rails directly. The integrated boost switch eliminates the bootstrap diode, improving reliability and saving board space; thermal shutdown and power-good flags simplify system health monitoring in racked equipment.
Được đề xuất
Networking Equipment
Switch, router, and optical line cards need efficient 12-V-to-low-voltage conversion with fast transient response for serializer and traffic-processor loads. The TPS53315 converts a 12-V distribution rail down to 0.6-V to 5.5-V points of load at up to 12 A with high efficiency, thanks to its low RDS(on) integrated FETs. D-CAP operation remains stable with all-ceramic output capacitors, reducing board height and improving reliability for fanless designs. The power-good output enables fault aggregation into the line-card management circuit, while the -40C to +85C industrial range suits remote and outdoor telecom cabinets.
Được đề xuất
Industrial Control Systems
Industrial PLC, motor-control, and automation boards require robust 12-V derived supplies tolerant of wide input variation. The TPS53315 accepts 4.5-V to 25-V supply and 3-V to 15-V conversion inputs, riding through bus sag while delivering a stable 12-A point-of-load rail for DSPs such as C2000 controllers and interface electronics. Overcurrent protection and thermal shutdown guard against fault conditions in harsh environments. Its D-CAP topology needs no compensation network, shortening design cycles for platform variations. Locate the exposed thermal pad over at least one square inch of copper to keep junction temperature within limits at high ambient temperatures.
Được đề xuất
Telecom Power Distribution
Telecom systems distributing power from -48-V or intermediate 12-V buses benefit from the TPS53315's single-rail input support and 3-V to 15-V conversion range. It provides tightly regulated, low-noise digital rails for baseband processors, network processors, and FPGA fabric at currents up to 12 A. The 1% reference accuracy supports narrow-voltage-tolerance ASICs, and D-CAP fast transient response handles bursty packet-processing loads without large output capacitor banks. The integrated boost switch and MOSFETs reduce component count for long-life designs where reliability and serviceability dominate over unit cost.
Được đề xuất
Test and Measurement Instruments
Bench instruments and automated test equipment need efficient, adjustable supplies for processor and interface boards. The TPS53315's 0.6-V to 5.5-V adjustable output lets one regulator design serve multiple board revisions and voltage targets by changing a feedback divider, while 12-A capability covers DSP and FPGA subsystem loads. D-CAP control delivers clean transient behavior with ceramic-only output filtering, reducing acoustic and EMI concerns versus higher-ripple designs. Its compact VQFN footprint frees board area for measurement front-end circuitry, and thermal shutdown provides a final protection layer in long-duration soak-test operation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TPS53315RGFR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TPS53319 | TPS53314 | TPS51315 | IR3889MTRPBF |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Infineon |
| Package | 40-VFQFN (RGF), 5x7 mm | 40-VFQFN (RGF) - same family | 40-VFQFN (RGF) - same family | 40-VFQFN (RGF) - same family | PQFN similar footprint - verify pin map |
| Output Current | 12 A | Higher (15 A class) | Lower (8 A class) | 12 A class | 12 A class |
| Control Mode | D-CAP (adaptive COT) | D-CAP | D-CAP | D-CAP class | Proprietary COT |
| Integrated Boost Switch | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Active | Active | Active | Active | Active |
Bảo phân biệt quan trọng
- Higher output current in same footprint (vsTPS53314)
- Integrated 19/7 mOhm FET pair (vsDiscrete controller designs)
- D-CAP control without compensation (vsIR3889MTRPBF)
Ghi chú thiết kế
Size the power stage for the 12-A load: with 19-mOhm high-side and 7-mOhm low-side FETs, conduction losses are roughly I^2 x 0.026 Ohm shared across both devices. At full load, budget approximately 2-3 W of loss in the IC plus inductor copper loss. Verify the output inductor saturation rating exceeds the D-CAP current-limit threshold, not just the 12-A continuous rating, and provide at least 2 x 22 uF of effective ceramic capacitance at VOUT for loop stability.
The 5x7 mm VQFN relies on its exposed pad for heat removal; internal data indicates roughly 25 C/W theta-JA on a good board. Connect the exposed pad to an array of thermal vias into a 1-2 oz ground plane of at least one square inch. At 12 A and VIN-VOUT of 12 V to 1 V, junction rise can exceed 50 C - verify junction temperature stays under the datasheet maximum at worst-case load and 85 C ambient.
Minimize the PHASE node loop area: place input ceramic capacitors directly across VIN and PGND with the shortest possible connection to the IC, and keep the inductor adjacent to PHASE. Route the VOS/VFB sense lines away from the switch node as a Kelvin connection at the output capacitor. Keep the bootstrap capacitor close to BST and PHASE. Follow TI datasheet layout guidelines (TPS53315 datasheet, PCB layout section) for the 40-pin VQFN (RGF) footprint.
Thông tin tuân thủ
Compliance data not present in provided sources; verify on TI product page quality/environmental section.
