STMicroelectronics

TS942BID - Dual Rail-to-Rail Micropower Op Amp | STMicroelectronics

MPN: TS942BID ✓ Hoạt động
2.5 V to 10 V Vdss 5 mA Id 8-SOIC, 0.154 inch, 3.90 mm width Package
MOQ: 1 |

TS942BID Tóm tắt

The STMicroelectronics TS942BID is a dual-circuit, rail-to-rail output micropower operational amplifier packaged in an 8-pin SOIC. Its 2.5 V to 10 V supply range, 60 dB gain-bandwidth product, 5 mA output current capability, and approximately 1.2 µA supply current per channel suit low-voltage analog systems that require low quiescent power and input/output operation near the supply rails. The TS942BID is intended for instrumentation, signal-conditioning, and general-purpose analog applications.

An operational amplifier is a high-gain analog building block that compares two input voltages and amplifies their difference. Within the broader semiconductor hierarchy, the TS942BID belongs to the operational-amplifier category, then analog amplifier ICs, and finally integrated circuits. Rail-to-rail output capability permits the output to approach the positive and negative supply limits under suitable load and output-voltage conditions, making the device useful in low-voltage sensor, portable-instrumentation, and battery-powered signal chains.

The device uses a 2.5 V minimum operating supply and supports supplies up to 10 V. Its typical gain-bandwidth product is 60 dB, while its typical output current capability is 5 mA per channel. The low-power operating characteristics are reflected in a quoted supply current of 1.2 µA per channel, and the offset-related listing identifies approximately 0.00015 µA, or 150 nA, of input bias current. These characteristics make the TS942BID appropriate for applications in which amplifier power can dominate the total system budget.

The TS942BID contains two amplifier channels in one compact 8-SO package. Its standard general-purpose classification and rail-to-rail architecture make it suitable for signal conditioning, low-level amplification, and buffer stages. Designers should still account for the finite gain-bandwidth product when operating at higher closed-loop gains, because bandwidth reduces as the noise gain rises. Input common-mode range, output swing, offset voltage, noise density, and slew rate should be confirmed from the manufacturer datasheet before precision or high-speed signal-chain use.

Typical application areas include portable sensor interfaces, low-power instrumentation, battery-operated measurement systems, and general analog signal conditioning. In a sensor interface, the TS942BID can amplify a low-level sensor output while keeping channel current consumption small. In an instrumentation block, its dual-channel configuration can reduce component count when two related signals must be conditioned. As a buffer, it can isolate a higher-impedance source from a downstream analog stage while maintaining a compact eight-pin footprint.

Layout and stability remain important in micropower designs. Place input and feedback components close to their associated pins, keep sensitive input traces away from switching nodes, and avoid long high-impedance traces that can increase leakage and noise pickup. Select passive feedback values that account for the amplifier’s gain-bandwidth limit, and verify operation across the full 2.5 V to 10 V supply range. The manufacturer datasheet should be used for the final pin assignment, typical characteristics, absolute maximum ratings, and application-circuit details.

This product summary combines the manufacturer’s device description with practical guidance for package reuse, analog layout, low-power selection, and replacement evaluation. It also distinguishes verified drop-in interchangeability from merely similar amplifier functions, helping engineers avoid PCB rework and unexpected bias, bandwidth, or supply-voltage differences.

Bộ thay thế dễ dàng lắp đặt cho TS942BID — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

TS942BID Tỷ lệ tối đa & tính chất điện

Amplifier Type Rail-to-rail output micropower operational amplifier
Number of Circuits 2 circuits
Number of Channels 2 channels
Supply Voltage Range 2.5 V to 10 V
Gain-Bandwidth Product 60 dB
Output Current per Channel 5 mA
Supply Current per Channel 1.2 µA
Input Bias Current 0.00015 µA
Khoảng nhiệt độ hoạt động -40°C to +85°C
Hộp 8-SOIC, 0.154 inch, 3.90 mm width
Số chân 8 pins
Kiểu lắp đặt Surface mount
Kiểu đầu ra Rail-to-rail
Application Classification General purpose

Hướng dẫn cấu hình chân TS942BID 8-soic, 0.154 inch, 3.90 mm width

Cấu hình chân cho TS942BID (8-soic, 0.154 inch, 3.90 mm width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 8-soic, 0.154 inch, 3.90 mm width cho TS942BID

Không có dữ liệu chân cụ thể sẵn có cho TS942BID.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

TS942BID phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Signal Conditioning, Portable Instrumentation, Low-Power Voltage Buffer, Industrial Low-Level Amplification, Medical Monitor Front End, Audio and Environmental Monitoring.

🧩

Battery-Powered Sensor Signal Conditioning

The TS942BID fits low-energy sensor interfaces because its approximately 1.2 µA supply current per channel limits amplifier overhead when the source impedance is moderate. The dual configuration can amplify or buffer two related sensor outputs without occupying two separate packages. Its 2.5 V minimum supply supports compact systems powered from a regulated low-voltage source, while the 60 dB gain-bandwidth product is suitable for slowly changing sensor signals. The practical constraint is closed-loop bandwidth: higher gain reduces the available bandwidth, so verify settling time and signal bandwidth against the 60 dB gain-bandwidth product.

📱

Portable Instrumentation

The TS942BID is appropriate for portable instrumentation that must combine compactness with low amplifier power consumption. Two channels in the 8-SOIC package can handle differential or independent analog channels, reducing board area compared with two discrete single amplifiers. Its 2.5 V to 10 V operating range supports several low-voltage supply architectures, and the 5 mA per-channel output capability is adequate for ordinary high-impedance measurement stages. Engineers should account for the 60 dB gain-bandwidth product and confirm output settling before using high gain with rapidly changing signals.

⚡

Low-Power Voltage Buffer

The TS942BID can serve as a voltage buffer when the source has a relatively high output impedance and the downstream circuit requires reduced loading. Rail-to-rail output operation is useful near the available supply range, while approximately 1.2 µA supply current per channel helps preserve battery life. The dual package can buffer a reference and measurement channel, or two sensor outputs, within one footprint. Because the 60 dB gain-bandwidth product limits closed-loop bandwidth, use unity-gain buffering for high-frequency signals and verify capacitive-load stability in the intended layout.

🏭

Industrial Low-Level Amplification

The TS942BID can amplify low-level signals in industrial monitoring circuits where each channel must operate with low quiescent current. Its dual-channel configuration supports two amplifier paths in an 8-SOIC package, while the 2.5 V to 10 V supply range covers common low-voltage control and measurement rails. The 60 dB gain-bandwidth product is most appropriate for process variables and other low-frequency quantities rather than high-speed communications. Use careful grounding, keep input traces short, and confirm input bias current, offset, and common-mode limits from the manufacturer datasheet for each sensor impedance.

💊

Medical Monitor Front End

The TS942BID can be considered for low-frequency medical monitoring front ends when two low-power analog channels are required. Its approximately 1.2 µA supply current per channel reduces the amplifier contribution to overall portable-system power, and rail-to-rail output capability improves utilization of a restricted supply voltage. The part is best suited to slowly varying signals because its 60 dB gain-bandwidth product limits bandwidth at higher closed-loop gains. Medical designs must separately verify safety, leakage, offset, noise, and application-specific requirements using the complete manufacturer datasheet and applicable design validation.

🎧

Audio and Environmental Monitoring

The TS942BID can buffer environmental or audio-monitoring inputs when the signal bandwidth is modest and power consumption is important. The dual channels can process left and right monitoring paths, or a sensor and its reference, within one 8-SOIC package. Rail-to-rail output behavior is useful in low-voltage systems, but its 60 dB gain-bandwidth product is not intended for high-fidelity wideband audio stages. Designers should keep the gain low for the widest bandwidth, evaluate input noise against the signal floor, and avoid placing sensitive input traces beside switching regulators or digital clocks.

Where can I buy the TS942BID online?
The TS942BID can be requested through the Request a Quote form on this page. The exact ordering suffix identifies the STMicroelectronics TS942BID dual operational amplifier in an 8-SO package, allowing procurement requests to target the correct manufacturer part number and package rather than a generic rail-to-rail amplifier.
What is the price of the TS942BID?
The TS942BID should be quoted through the Request a Quote form on this page so the current commercial terms can be matched to the required quantity. The part is a dual, rail-to-rail micropower operational amplifier in an 8-SOIC package with a 2.5 V to 10 V supply range and a 60 dB gain-bandwidth product.
What is the lead time for the TS942BID?
Use the Request a Quote form on this page to request the current lead time and minimum order quantity for the TS942BID. Its manufacturer ordering designation identifies an 8-SOIC packaged dual amplifier, so confirming the exact suffix and quantity with the supplier helps prevent confusion with other TS942 package or temperature options.
Is the TS942BID in stock?
Current inventory should be confirmed through the Request a Quote form on this page. The TS942BID is identified as an active STMicroelectronics general-purpose dual operational amplifier in an 8-SO package; an operational quote also establishes allocation for the requested production quantity rather than relying on a single retail stock count.
What are the key specifications of the TS942BID that engineers should know?
The TS942BID is a dual rail-to-rail micropower operational amplifier with a 2.5 V to 10 V supply range, 60 dB gain-bandwidth product, 5 mA output current capability per channel, and approximately 1.2 µA supply current per channel. It is offered in an 8-SOIC surface-mount package for low-voltage, low-power analog signal-conditioning designs.
What is the TS942BID used for?
The TS942BID is used for low-voltage analog signal amplification, buffering, and general-purpose instrumentation. Its dual-channel configuration supports two amplifier functions in one 8-SOIC package, while the approximately 1.2 µA supply current per channel helps limit power consumption in battery-operated sensor, measurement, and portable equipment.
Where do I download the TS942BID datasheet PDF?
The TS942BID datasheet PDF is available from the datasheet link on this page or through the manufacturer-data copy at the listed document location. The document describes the rail-to-rail micropower dual operational amplifier, including its 2.5 V to 10 V supply range, 60 dB gain-bandwidth product, 8-SOIC package, and electrical characteristics.
Where can I find the TS942BID pinout?
The TS942BID pin assignment should be taken from the pin-description diagram in the manufacturer datasheet. The device is housed in an 8-SOIC package, and the datasheet pin table is the controlling source for input, output, supply, and exposed-package details when assigning PCB tracks or designing a replacement board.
What can replace the TS942BID?
A true replacement must use the same 8-SO footprint, preserve pin-to-pin signal assignments, and remain compatible with the 2.5 V to 10 V supply range and required closed-loop bandwidth. No independently confirmed pin-to-pin substitute is listed on this page, so use the manufacturer datasheet and the Request a Quote form to evaluate an approved alternative before changing the BOM.
Is the TS942BID suitable for battery-powered sensor interfaces?
Yes, the TS942BID is suitable for many battery-powered sensor interfaces. Its approximately 1.2 µA supply current per channel and 2.5 V minimum operating voltage support low-power operation, while the dual amplifier configuration can condition two related signals. The actual battery life also depends on sensor current, load, duty cycle, and regulator efficiency.
TS942BID versus TS942BIN: which version should be selected?
The TS942BID and TS942BIN are both associated with the TS942 dual rail-to-rail micropower amplifier family, but their order codes may identify different packaging or delivery options. Confirm the manufacturer’s order-information table and pin configuration before substituting one for the other. A tape-and-reel code alone is not a different circuit, but it still must match the assembler’s requirements.
When should I choose the TS942BID over a higher-bandwidth amplifier?
Choose the TS942BID when low quiescent current and a compact dual amplifier matter more than high closed-loop bandwidth. Its 60 dB gain-bandwidth product supports moderate-gain, low-frequency signal conditioning, while a higher-bandwidth amplifier is preferable for fast edges, wideband instrumentation, or high closed-loop gain where bandwidth must remain adequate.
When should I choose the TS942BID over a precision low-noise amplifier?
Choose the TS942BID when the design prioritizes a 2.5 V to 10 V supply range, dual-channel integration, and approximately 1.2 µA supply current per channel over precision offset or noise performance. Use a precision low-noise amplifier when input-referred noise and offset are the dominant constraints; those specific parameters should be checked in the manufacturer datasheet.
How should I design the PCB around the TS942BID?
Place input, feedback, and bypass components close to their associated TS942BID pins, and keep high-impedance input traces short and away from switching nodes. Use a solid ground reference and route each amplifier channel consistently. The 8-SOIC footprint is compact, so mechanical clearance and exposed-pad requirements must be checked against the exact package drawing.
What is the best STMicroelectronics equivalent for the TS942BID?
The closest STMicroelectronics starting point is the TS942 family, but an equivalent cannot be selected from the order-code name alone. The candidate must share the 8-SO footprint, pinout, 2.5 V to 10 V supply capability, 60 dB-class bandwidth, and required output-current performance. Request a quote for the exact manufacturer suffix rather than approving an unverified substitute.
What does the 60 dB gain-bandwidth product mean for the TS942BID?
The TS942BID’s 60 dB gain-bandwidth product means that closed-loop bandwidth falls as operational-amplifier gain is increased. At unity gain, the available bandwidth is approximately 1 kHz. Higher noise gain reduces usable bandwidth, so applications requiring faster settling or wider signal bandwidth need a higher-bandwidth amplifier or a carefully verified gain configuration.

Dữ liệu tham khảo kỹ thuật cho TS942BID — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the TS942BID when the design needs two low-power amplifier channels, a 2.5 V to 10 V supply range, and rail-to-rail output operation in an 8-SOIC footprint. It is especially attractive for portable sensors, low-frequency instrumentation, buffering, and battery-operated monitoring where the approximately 1.2 µA per-channel supply current is important. The main limitation is the 60 dB gain-bandwidth product: higher closed-loop gain reduces usable bandwidth, so this device is better for slow or moderate-frequency signals than wideband audio or fast acquisition. Before approving another amplifier, require the same package, pin-to-pin assignments, supply compatibility, adequate output drive, and acceptable bandwidth. Similar functionality is not enough; a drop-in decision must also consider offset, noise, bias current, common-mode range, and capacitive-load stability.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 8-SOIC, 0.154 inch, 3.90 mm width
Brand STMicroelectronics
Amplifier Type Rail-to-rail output micropower operational amplifier
Number of Circuits 2 circuits
Supply Voltage Range 2.5 V to 10 V
Gain-Bandwidth Product 60 dB
Output Current per Channel 5 mA
Supply Current per Channel 1.2 µA
Input Bias Current 0.00015 µA
Operating Temperature Range -40°C to +85°C

Bảo phân biệt quan trọng

  • Dual micropower channels in one package (vsSingle-channel TS942-family implementations)
  • Low-voltage rail-to-rail operation (vsHigher-supply general-purpose op amps)
  • Low-power signal conditioning (vsHigher-bandwidth amplifiers)

Ghi chú thiết kế

Place each amplifier’s input, feedback, and bypass components close to their associated pins. The TS942BID uses a compact 8-SOIC footprint, so minimizing trace length around the feedback loop helps control parasitic capacitance and improve settling behavior. Keep high-impedance input nodes away from clocks, switching-regulator nodes, and other high-current traces.

Account for the 60 dB gain-bandwidth product when selecting feedback resistors and setting closed-loop gain. Bandwidth decreases in proportion to noise gain, so a nominal gain of 1 provides approximately 1 kHz of bandwidth. Verify the required signal bandwidth, phase margin, and settling behavior with the actual feedback network and source impedance.

Do not treat a similar TS942 order code as a confirmed substitute without checking its exact order-information entry. The TS942BID must retain the required 8-SOIC footprint, pin assignment, 2.5 V to 10 V operating range, and suitable output-current capability. Also verify capacitive-load stability and output swing before driving a load close to the supply rails.

Budget the TS942BID’s approximately 1.2 µA supply current per channel together with output-current demand and load power. The number 1.2 µA represents the quoted per-channel supply current, not total board consumption; regulators, pull networks, sensors, and downstream loads can dominate the final power budget. Confirm quiescent current across the intended supply voltage and temperature range.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The component is a general-purpose analog IC, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product page or material declaration.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

TS942BID datasheet TS942BID pinout TS942BID specifications TS942BID equivalent TS942BID replacement TS942BID cross reference TS942BID 8-SOIC pinout TS942BID application circuit TS942BID price TS942BID stock STMicroelectronics TS942BID TS942BID vs TS942BIN

Các bộ phận và thuật ngữ liên quan

STMicroelectronics TS942BID TS942BIN TS942 operational amplifier dual amplifier micropower amplifier rail-to-rail output analog amplifier IC integrated circuit semiconductor signal conditioning instrumentation amplifier buffer low-dropout power management gain-bandwidth product input bias current quiescent current supply current common-mode voltage 8-SOIC SOIC family surface-mount package SMD package 2.5 V to 10 V supply
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ