TUSB3410IRHB UART-I2C-IrDA USB Bridge | Texas Instruments
MPN: TUSB3410IRHB ✗ Cuối đờiTUSB3410IRHB Tóm tắt
A USB-to-UART bridge is an interface controller that translates transactions between a USB host and an embedded serial device. The TUSB3410 belongs to the broader USB interface-controller hierarchy and combines a USB interface, enhanced UART, I2C connectivity, IrDA support, and an embedded 8052 microcontroller. This integration allows legacy serial equipment to communicate through a USB connection without requiring a separate external host controller.
The TUSB3410 contains an 8052 microcontroller core with 10 KB of ROM and 16 KB of RAM. Its ROM contains firmware supporting the bridge functions, while RAM can be loaded by the USB host or through external onboard memory connected by I2C. The RHB package provides 32 pins and an exposed thermal pad, enabling a compact surface-mount implementation with an effective PCB heat-spreading area.
The 3.0 V to 3.6 V operating range suits systems that use a 3.3 V power rail. In the UART path, the device bridges USB to an enhanced serial interface, and its I2C capability supports access to external memory or configuration devices. IrDA support provides an infrared-oriented serial path, although the selected external transceiver, optical interface, and application circuitry remain important parts of the complete design.
Typical uses include legacy serial-port adapters, industrial equipment interfaces, point-of-sale systems, laboratory data acquisition, embedded-control service ports, and infrared-capable peripheral connections. The same bridge architecture can simplify host software when existing equipment already communicates through UART while preserving the familiar serial protocol at the device side.
PCB implementation should follow the manufacturer pin and land-pattern guidance for the RHB package. Keep USB traces short and controlled, connect the exposed pad to the appropriate ground plane, provide decoupling close to the supply pins, and route high-speed or infrared-associated interfaces according to their respective signal-integrity requirements. Confirm unused control-pin states in the device documentation before finalizing the schematic.
Bộ thay thế dễ dàng lắp đặt cho TUSB3410IRHB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TUSB3410IRHB (cùng hình factor và footprint) — khác nhau ở Package.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếTUSB3410IRHB Thông số kỹ thuật
| Product Type | USB serial port controller and UART-to-USB bridge |
| Supported Interfaces | USB, UART, I2C, and IrDA |
| Microcontroller Core | 8052 |
| ROM Capacity | 10 KB |
| RAM Capacity | 16 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| Temperature Grade | Industrial |
| Hộp | 32-pin VQFN RHB with exposed pad |
| Số chân | 32 pins |
| Kiểu lắp đặt | Surface mount |
| UART Type | Enhanced serial port |
| I2C Function | External onboard-memory and configuration access |
| IrDA Function | Supported |
| RAM Loading Paths | USB host or external onboard memory through I2C |
Hướng dẫn cấu hình chân TUSB3410IRHB 32-pin vqfn rhb with exposed pad
Cấu hình chân cho TUSB3410IRHB (32-pin vqfn rhb with exposed pad gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TUSB3410IRHB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TUSB3410IRHB phù hợp cho 6 Áp dụngs: Legacy USB-to-UART Adapter, Industrial Serial Equipment Interface, Point-of-Sale Peripheral Interface, Laboratory Data Acquisition Interface, Infrared-Capable Peripheral Connection, Embedded Control Service Port.
Legacy USB-to-UART Adapter
The TUSB3410IRHB is suited to an adapter that gives an older peripheral a USB connection while preserving an enhanced UART interface on the equipment side. Its 8052 core, 10 KB ROM, and 16 KB RAM provide a self-contained bridge controller, while the 3.0 V to 3.6 V operating range supports a 3.3 V system rail. The host can load controller RAM through USB or through external onboard memory connected by I2C, supporting firmware-update workflows in deployed adapters.
Được đề xuất
Industrial Serial Equipment Interface
The TUSB3410IRHB can bridge USB service connections into embedded industrial equipment that already uses an enhanced UART. Its -40°C to +85°C industrial temperature range and 3.0 V to 3.6 V supply range fit controlled equipment environments, while the 32-pin VQFN RHB package supports compact board layouts. I2C access to external onboard memory is useful when the product requires downloadable configuration or application code alongside the USB-to-serial function.
Được đề xuất
Point-of-Sale Peripheral Interface
A point-of-sale terminal can use the TUSB3410IRHB to connect a serial peripheral to a USB host while retaining a familiar UART command interface in the peripheral. The integrated 8052 controller handles the USB-to-serial bridge rather than requiring a separate USB host controller and discrete serial transceiver architecture. The device's 16 KB RAM and host-loading capability also support field-updatable product firmware through the USB path.
Được đề xuất
Laboratory Data Acquisition Interface
The TUSB3410IRHB can provide a USB connectivity path for laboratory instruments that expose an enhanced UART protocol. The controller bridges host commands to the instrument while its I2C interface can access external onboard memory for code or configuration storage. For acquisition equipment, the main design considerations are stable 3.3 V supply routing, low-noise decoupling, correct USB signal layout, and ground-plane continuity around the exposed pad.
Được đề xuất
Infrared-Capable Peripheral Connection
The TUSB3410IRHB is appropriate for equipment that needs to retain an IrDA-oriented serial capability while also presenting USB to a modern host. Its IrDA support must be paired with the appropriate external infrared interface circuitry, and the UART path remains available for conventional serial communication. The integrated 8052 core and 10 KB ROM keep the bridge function compact, while I2C can support external memory access where product firmware must be loaded or retained.
Được đề xuất
Embedded Control Service Port
The TUSB3410IRHB can add a USB service port to an embedded controller platform while preserving access through an enhanced UART channel. The 3.3 V operating range and compact 32-pin VQFN package are useful where board space is constrained. Host-side RAM loading supports field firmware updates, and I2C access to external onboard memory can simplify configuration storage, although both functions require firmware and boot-mode coordination in the final system design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TUSB3410IRHB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Texas Instruments |
| Package | 32-pin VQFN RHB with exposed pad |
| Supported Interfaces | USB, UART, I2C, and IrDA |
| Microcontroller Core | 8052 |
| ROM Capacity | 10 KB |
| RAM Capacity | 16 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Operating Temperature Range | -40°C to +85°C |
| Temperature Grade | Industrial |
| Lifecycle Status | Obsolete |
Bảo phân biệt quan trọng
- Combines four interface types in one bridge controller (vsTUSB3210PM)
- Integrates programmable controller resources (vsTUSB3410RHBR)
- Supports multiple code-loading paths (vsTUSB3410RHB)
Ghi chú thiết kế
Implement the RHB land pattern exactly as shown in the manufacturer package drawing, including the exposed pad and its thermal-via recommendation. The exposed pad should connect to the appropriate ground-plane area rather than being left electrically floating. Preserve the device's 3.0 V to 3.6 V supply requirement and place local input and output decoupling capacitors close to their associated pins to minimize supply disturbance on the USB and UART paths.
Route the USB differential pair as a controlled-impedance pair and minimize its length from the controller to the USB connector or transceiver. Keep the return path continuous under the pair, avoid stubs, and place nearby switching-converter stages away from the bridge and its supply pins. Use the manufacturer layout guidance for the RHB footprint, and verify USB signal-integrity requirements in the complete board stack-up.
Do not assume that devices with similar USB-to-serial functions are PCB-compatible. The TUSB3410IRHB requires an 8052-based firmware flow, host RAM loading, and the correct UART, I2C, IrDA, control, and power connections. Confirm the complete 32-pin RHB pin list, unused-pin states, boot behavior, and host-driver requirements in the manufacturer documentation before revising an existing board.
Estimate the bridge's power budget from the 3.3 V rail and the selected operating mode before finalizing the power architecture. The 8052 core, RAM, USB transceiver activity, and external support circuitry determine actual rail demand. Use measured or datasheet-based operating currents where available, and provide local decoupling with low ESR and suitable voltage rating for reliable USB operation.
Thông tin tuân thủ
The industrial temperature grade does not itself establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require manufacturer documentation.