TUSB3410RHBR - USB 2.0 UART Bridge | Texas Instruments
MPN: TUSB3410RHBR ✓ Hoạt độngTUSB3410RHBR Tóm tắt
A USB serial bridge is an interface IC that translates between a USB host and an embedded serial device. Within the product hierarchy, the TUSB3410 is a USB interface controller, serial-port bridge, application-specific microcontroller, and power-management-independent semiconductor. This category allows legacy RS-232, RS-485, IrDA, and related serial equipment to connect through a standardized USB port without redesigning the host-side interface.
Key features include full-speed USB operation, support for an enhanced UART channel, I2C and IrDA functionality, an 8052 controller core, and 10 kB of ROM. The RHB package exposes a pad for improved heat transfer on compact circuit boards. These features suit equipment that needs a direct USB-to-serial path while retaining control over modem-style UART handshake signals.
The TUSB3410 integrates an 8052-compatible microcontroller architecture with USB and serial-port functions rather than behaving as a passive level translator. Its internal ROM supports device operation, while external circuitry handles the selected physical serial interface. For RS-232 designs, an external transceiver is required for voltage conversion and line protection; for RS-485 designs, the appropriate transceiver and termination network must likewise be selected separately.
Typical applications include USB-to-RS-232 adapters, industrial serial equipment, configuration and debug ports, infrared data links, USB-to-IrDA adapters, and legacy serial accessories. The device is also suitable for data acquisition and control equipment that uses handshake signals to coordinate transmitter and receiver activity.
PCB design should preserve the exposed-pad thermal path and keep USB, crystal, and serial-interface routing away from noisy power stages. Confirm the unused hardware-control-pin states against the manufacturer's pin-description table and interface guidance. Review the exact electrical limits, clock requirements, and transceiver interface details before releasing a production design.
This page consolidates package, interface, temperature, lifecycle, compliance, replacement, and application guidance while adding practical PCB and design considerations. It also identifies same-footprint TUSB3410 family options so engineers can distinguish electrical-temperature variants from reel or small-reel ordering codes without changing the PCB land pattern.
Bộ thay thế dễ dàng lắp đặt cho TUSB3410RHBR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TUSB3410RHBR (cùng hình factor và footprint) — khác nhau ở Package, Device Type.
TUSB3410RHB
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TUSB3410RHBG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TUSB3410IRHB
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TUSB3410IRHBG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TUSB3410RHBT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TUSB3410RHBR Thông số kỹ thuật
| Product Type | USB serial-port controller and UART-to-USB bridge |
| USB Version | USB 2.0 full-speed |
| Controller Core | 8052-compatible core |
| Program Memory | 10 kB ROM |
| UART Channels | 1 enhanced UART channel |
| Serial Interfaces | UART, I2C, and IrDA |
| Supported Serial Modes | RS-232, half-duplex RS-485, and IrDA operating modes |
| Hộp | 32-pin VQFN (RHB) with exposed pad |
| Số chân | 32 pins |
| Khoảng nhiệt độ hoạt động | 0°C to 70°C |
| Kiểu lắp đặt | Surface mount |
| RoHS Compliance | RoHS3 compliant |
| Moisture Sensitivity Level | MSL 2, 260°C for 1 year |
Hướng dẫn cấu hình chân TUSB3410RHBR 32-pin vqfn (rhb) with exposed pad
Cấu hình chân cho TUSB3410RHBR (32-pin vqfn (rhb) with exposed pad gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TUSB3410RHBR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TUSB3410RHBR phù hợp cho 6 Áp dụngs: USB-to-RS-232 Adapter, Industrial RS-485 Gateway, USB-to-IrDA Data Link, Legacy Serial Configuration Port, Data-Acquisition Instrument, Point-of-Sale and Peripheral Adapter.
USB-to-RS-232 Adapter
The TUSB3410RHBR is suitable for a USB-to-RS-232 adapter because it bridges one enhanced UART channel to a USB 2.0 full-speed interface while retaining modem-style control signals. Place the bridge between the USB connector and an external RS-232 transceiver; the TUSB3410 does not perform RS-232 voltage conversion itself. The 32-pin VQFN package permits a compact implementation, and the exposed pad provides a direct thermal path. The 0°C to 70°C rating suits commercial equipment, although industrial enclosures may require an extended-temperature family variant.
Được đề xuất
Industrial RS-485 Gateway
The TUSB3410RHBR can serve as the host-side controller in a USB-to-half-duplex-RS-485 gateway. Its enhanced UART supports the transmit, receive, and handshake functions required to coordinate a multidrop serial link, while I2C and IrDA support broaden the bridge's utility in connected equipment. A separate RS-485 transceiver is required for differential line levels, direction control, biasing, and protection. The compact 32-pin VQFN footprint helps limit board area, but the RHBR commercial temperature range must remain within the enclosure's expected ambient conditions.
Được đề xuất
USB-to-IrDA Data Link
The TUSB3410RHBR is appropriate for a USB-to-IrDA adapter because its manufacturer product page identifies IrDA as a supported serial mode alongside UART and I2C. The bridge can present an infrared-oriented serial interface to a host while coordinating data through the internal 8052-compatible controller and ROM. An external IrDA transceiver and optical front end are generally required to convert electrical signals to infrared optical pulses. Keep the high-speed serial traces short, controlled, and away from switching nodes to reduce noise sensitivity in the data link.
Được đề xuất
Legacy Serial Configuration Port
The TUSB3410RHBR can add a USB configuration interface to legacy equipment that originally used a serial port. One enhanced UART channel provides the data path, while the documented control and handshake signals allow firmware to retain flow-control behavior when connected to a host. The bridge's 10 kB ROM and 8052-compatible controller consolidate interface handling in one device. Designers should use the manufacturer's pin table to determine correct states for unused handshake inputs and outputs rather than treating them automatically as no-connect pins.
Được đề xuất
Data-Acquisition Instrument
The TUSB3410RHBR can provide a host connection for laboratory and industrial data-acquisition equipment with an existing UART interface. Its USB 2.0 full-speed path offers a straightforward peripheral connection, and its enhanced UART supports the serial handshake needed to coordinate measurement equipment with a host. The 32-pin VQFN package helps reduce panel-board size, while the exposed pad aids heat dissipation. Add an appropriate level-shifting transceiver when the instrument uses RS-232, and isolate the serial interface where ground potential may vary.
Được đề xuất
Point-of-Sale and Peripheral Adapter
The TUSB3410RHBR can bridge a point-of-sale terminal, service console, or other peripheral that uses enhanced UART signaling to a USB host. The internal 8052-compatible core and 10 kB ROM support a self-contained USB serial controller, reducing the host's dependence on legacy serial hardware. The 0°C to 70°C specification targets commercial indoor deployments, while the 32-pin VQFN package supports compact adapter boards. External level translation and surge protection should be selected according to the cable length and whether the peripheral uses RS-232 or RS-485.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TUSB3410RHBR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TUSB3410RHB | TUSB3410RHBG4 | TUSB3410IRHB | TUSB3410IRHBG4 | TUSB3410RHBT |
|---|---|---|---|---|---|---|
| Package | VQFN-32 (RHB) with exposed pad | VQFN-32 (RHB) with exposed pad | VQFN-32 (RHB) with exposed pad | VQFN-32 (RHB) with exposed pad | VQFN-32 (RHB) with exposed pad | VQFN-32 (RHB) with exposed pad |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Function | UART, I2C, and IrDA serial port to USB bridge | UART, I2C, and IrDA serial port to USB bridge | UART, I2C, and IrDA serial port to USB bridge | UART, I2C, and IrDA serial port to USB bridge | UART, I2C, and IrDA serial port to USB bridge | UART, I2C, and IrDA serial port to USB bridge |
| USB Speed | USB 2.0 full-speed | USB 2.0 full-speed | USB 2.0 full-speed | USB 2.0 full-speed | USB 2.0 full-speed | USB 2.0 full-speed |
| Controller Core | 8052-compatible core | 8052-compatible core | 8052-compatible core | 8052-compatible core | 8052-compatible core | 8052-compatible core |
| ROM | 10 kB | 10 kB | 10 kB | 10 kB | 10 kB | 10 kB |
| UART Configuration | 1 enhanced UART channel | 1 enhanced UART channel | 1 enhanced UART channel | 1 enhanced UART channel | 1 enhanced UART channel | 1 enhanced UART channel |
| Ordering Suffix | RHBR | RHB | RHBG4 | IRHB | IRHBG4 | RHBT |
Bảo phân biệt quan trọng
- Combines USB, enhanced UART, I2C, and IrDA in one bridge (vsTUSB3410RHB)
- Complete integration of an 8052-compatible controller and USB interface (vsTUSB3410RHBG4)
- Direct 32-pin RHB footprint reuse across TUSB3410 ordering variants (vsTUSB3410IRHB)
- Single-chip support for USB-to-IrDA as well as conventional serial bridging (vsTUSB3410RHBT)
Ghi chú thiết kế
Preserve the exposed-pad connection with a solderable thermal land and vias into the relevant ground or power plane as directed by the manufacturer's land-pattern guidance. The 32-pin VQFN package has no accessible leads on its bottom face, so accurate stenciling, assembly alignment, and adequate solder fill are essential for reliable electrical and thermal performance.
Keep USB differential routing short, impedance-controlled, and continuous over a solid ground plane. Place USB-series protection and common-mode components close to the connector, while separating the USB path from the external UART or RS-485 transceiver. Route crystal and clock signals away from switching nodes and noisy digital return paths to reduce edge jitter and communication errors.
Do not treat the TUSB3410 as the RS-232 or RS-485 line driver. Add a suitable external transceiver for voltage conversion, isolation, direction control, or differential signaling. Also use the manufacturer pin-description table to assign unused hardware-control pins; the interface discussion for TUSB3410RHBR specifically notes that RTS, RI, DCD, DSR, and CTS cannot all simply be left unconnected.
Design the USB supply path and local bypass network around the electrical requirements in the manufacturer datasheet. Keep the input-capacitor placement close to the device's supply and ground pins, and verify capacitor voltage rating, effective capacitance, and DC-bias derating. Avoid adding bulk capacitance that could interfere with USB inrush behavior without checking the host and device specifications.
Thông tin tuân thủ
RoHS3 compliance and MSL 2 at 260°C for one year are reported for TUSB3410RHBR. AEC-Q100 status is treated as not applicable because this commercial interface controller is not identified as an automotive-qualified product.