Microchip Technology

VSC8514XMK-13 - Quad-Port Gigabit Ethernet PHY | Microchip

MPN: VSC8514XMK-13 ✓ Hoạt động
138-QFN, 12 mm × 12 mm Package 10/100/1000BASE-T Speed
MOQ: 1 |

VSC8514XMK-13 Tóm tắt

The Microchip Technology VSC8514XMK-13 is a quad-port Gigabit Ethernet physical-layer transceiver, or PHY, designed for energy-efficient broadband gateways, data centers, enterprise networks, and carrier equipment. It supports four 10/100/1000BASE-T copper ports, operates from a single low-power supply, and is housed in a 138-QFN 12 mm × 12 mm package. The device also supports TDM backhaul, wireless base-station, and other carrier applications.

A Gigabit Ethernet PHY is the physical-layer component that converts digital Ethernet data into signals suitable for transmission over twisted-pair cabling and performs the complementary receive function. It sits below the Ethernet MAC in the communication hierarchy: application data passes through the MAC and network processor before reaching the PHY, which provides the physical copper-port interface. A multiport PHY consolidates four Gigabit Ethernet channels in one package, reducing component count, board area, and power-management complexity compared with four discrete ports.

The VSC8514 supports 10/100/1000BASE-T operation for enterprise and carrier networks, while its QSGMII and SGMII-family connectivity allows connection to a switching or routing device. Synchronous Ethernet support and TDM backhaul capabilities make the device applicable to infrastructure equipment requiring deterministic transport and precise timing. Its low-power operating approach is intended to improve energy efficiency in broadband gateways, data-center networking equipment, wireless base stations, and enterprise systems.

The 138-QFN package concentrates a high-speed, multiport interface into a compact 12 mm × 12 mm surface-mount footprint. Its exposed thermal pad supports heat transfer through the PCB, but thermal performance still depends on the number of active ports, copper-cable reach, supply voltage, ambient temperature, and board construction. Differential pairs for each Gigabit port require controlled PCB routing, while the high-speed serial links demand short, continuous return paths and properly modeled termination networks.

Typical installations include carrier access platforms, Ethernet aggregation equipment, enterprise routers, broadband access nodes, wireless base-station backhaul, and data-center network interfaces. In these systems, the PHY can provide four copper ports behind one host-facing interface, reducing physical interface count and simplifying control software. Designers should confirm the required MAC interface, synchronization features, reference clocks, cable reach, regulatory constraints, and thermal conditions against the manufacturer datasheet before releasing the PCB layout.

For a new layout, place decoupling capacitors close to the power terminals, route each 10/100/1000BASE-T channel as a controlled-impedance differential pair, and provide unobstructed thermal copper beneath the exposed pad. Confirm the complete power-up sequence and interface timing with the system controller. Avoid substituting a different VSC8514 ordering code until its grade, revision, and feature differences have been checked against the target design requirements.

This page organizes the product identity, verified package information, candidate same-family drop-in options, application guidance, comparison parameters, and PCB design considerations. It is intended to help engineers narrow the correct Ethernet PHY ordering code while keeping package compatibility and thermal constraints explicit.

Bộ thay thế dễ dàng lắp đặt cho VSC8514XMK-13 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với VSC8514XMK-13 (cùng hình factor và footprint) — khác nhau ở Package, Synchronous Ethernet, Power Management.

Microchip Technology
Package: 138-pin QFN, 12 x 12 mm
Power Management: Low-power operation
So sánh với VSC8514XMK-13 →
Microchip Technology
Package: 138-QFN (12 x 12 mm)
Synchronous Ethernet: Not supported in the -14 configuration
Power Management: ActiPHY low-power operation
So sánh với VSC8514XMK-13 →

VSC8514XMK-03

✅ Drop-In ⚠️ Thông số chưa được xác minh
Microchip Technology
📦 138-QFN (12x12)
Quad-port Gigabit Ethernet PHY · 10 Mb/s, 100 Mb/s, and 1000 Mb/s · 4 ports · 3.3 V · 138-pin QFN, 12 x 12 mm · Surface mount · Supported · Supported

Liên hệ để biết giá

Xem tài liệu →

VSC8514XMK-11

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 138-QFN (12x12)
Same 138-QFN 12x12 package family; exact ordering-code differences are 0% quantified in public snippets and require datasheet confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

VSC8514XMK-14

✅ Drop-In ⚠️ Thông số chưa được xác minh
Microchip Technology
📦 138-QFN (12x12)
4 ports · 10/100/1000BASE-T · Copper Ethernet · QGMII · Not supported in the -14 configuration · Industrial temperature · 138-QFN (12 x 12 mm) · Surface mount

Liên hệ để biết giá

Xem tài liệu →

VSC8514XMK-13 Thông số kỹ thuật

Product Type Quad-port Gigabit Ethernet PHY
Number of Ports 4 ports
Ethernet Speed 10/100/1000BASE-T
Medium Copper twisted-pair
Host Interface QSGMII and SGMII
Synchronous Ethernet Supported
TDM Backhaul Supported
Application Areas Broadband gateways, data centers, enterprise networks, wireless base stations, and carrier equipment
Power Architecture Single low-power supply
Hộp 138-QFN, 12 mm × 12 mm
Kiểu lắp đặt Surface mount
Package Code XMK
Exposed Thermal Pad Present

Hướng dẫn cấu hình chân VSC8514XMK-13 xmk

Cấu hình chân cho VSC8514XMK-13 (xmk gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân xmk cho VSC8514XMK-13

Không có dữ liệu chân cụ thể sẵn có cho VSC8514XMK-13.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

VSC8514XMK-13 phù hợp cho 6 Áp dụngs: Enterprise Network Equipment, Data-Center Network Interfaces, Broadband Gateway and CPE, Wireless Base-Station Backhaul, Industrial Ethernet Control, Carrier Access and TDM Transport.

🌐

Enterprise Network Equipment

The VSC8514XMK-13 is appropriate for enterprise switches, routers, and access appliances requiring four Gigabit Ethernet copper ports in one device. Its 10/100/1000BASE-T capability covers common LAN links, while QSGMII or SGMII connectivity provides a high-speed path to a switching or routing block. Consolidating four PHYs in one 138-QFN package reduces board area and power-management overhead. Designers should reserve space for the exposed thermal pad, preserve controlled-impedance routing on every copper channel, and verify that the selected ordering code supports the required temperature grade and interface configuration.

🖥️

Data-Center Network Interfaces

The VSC8514XMK-13 can support low-power copper-facing network interfaces in data-center switches, servers, and edge aggregation equipment. Four integrated 10/100/1000BASE-T ports allow one PHY device to serve multiple 1 GbE links while the QSGMII or SGMII interface connects to a central switching fabric. The low-power operating approach helps control system consumption in densely deployed equipment. Thermal and signal-integrity planning remain critical because four active channels, the 12 mm × 12 mm QFN package, and high-speed serial links can concentrate heat and demand precise return-path routing.

📱

Broadband Gateway and CPE

The VSC8514XMK-13 fits broadband gateways and customer-premises equipment that need several Gigabit Ethernet service ports without using four separate PHY packages. Four 10/100/1000BASE-T channels provide LAN connectivity for home gateways, fiber termination systems, and enterprise CPE, while the host-facing serial interface transfers traffic to an access processor. Low-power operation is valuable where continuously connected customer equipment must meet energy-efficiency targets. The PCB should place the PHY close to the Ethernet connectors, follow differential-pair geometry rules, and provide adequate exposed-pad cooling for sustained multi-port traffic.

🌐

Wireless Base-Station Backhaul

The VSC8514XMK-13 is applicable to wireless base-station and carrier backhaul equipment because the family supports TDM backhaul, Synchronous Ethernet, and four copper Gigabit Ethernet ports. These capabilities allow equipment designers to combine traffic transport and precision timing functions around a multiport copper interface. The QSGMII or SGMII connection supports high-bandwidth aggregation toward a network processor or switch. Before deployment, verify the exact clocking, Synchronous Ethernet configuration, interface timing, and temperature requirements for the base-station environment using the manufacturer documentation.

🏭

Industrial Ethernet Control

The VSC8514XMK-13 can support industrial controllers, factory communication equipment, and managed automation endpoints requiring four Gigabit Ethernet ports. Its consolidated PHY architecture simplifies the physical-layer portion of a multiport industrial network while retaining SGMII and QSGMII-class host connectivity. Industrial implementations must confirm the ordering code’s temperature grade, isolation requirements, conducted-emissions expectations, and long-term component availability. PCB design should separate sensitive clocking and power paths from Ethernet differential pairs, use manufacturer-recommended filtering and terminations, and preserve thermal continuity beneath the QFN exposed pad.

🌐

Carrier Access and TDM Transport

The VSC8514XMK-13 fits carrier-access platforms and transport equipment that combine four 10/100/1000BASE-T service ports with TDM backhaul and Synchronous Ethernet capability. These features allow a network appliance to manage multiple access links while maintaining timing relationships across the system. The 138-QFN package provides a compact implementation, but four active copper PHYs require careful thermal design and channel-layout discipline. Engineers should confirm clock architecture, TDM lane behavior, line-rate limits, cable reach, and regulatory requirements for the finished carrier system before committing the layout.

What is the VSC8514XMK-13?
The VSC8514XMK-13 is a Microchip Technology quad-port Gigabit Ethernet PHY for 10/100/1000BASE-T copper networks. It provides four physical-layer ports in a 138-QFN 12 mm × 12 mm package and supports QSGMII, SGMII, Synchronous Ethernet, and TDM backhaul. According to the Microchip VSC8514 product page, it targets low-power broadband gateways, data centers, enterprise networks, wireless base stations, and carrier equipment.
Where can I download the VSC8514XMK-13 datasheet PDF?
The VSC8514XMK-13 datasheet PDF is available from the Microchip VSC8514 product page and the linked VSC8514 datasheet document. The document identifies the family as a quad-port 10/100/1000BASE-T PHY with Synchronous Ethernet and QSGMII MAC support. Use the manufacturer datasheet for authoritative pin assignments, electrical limits, timing, register information, and application-circuit details.
Where can I find the VSC8514XMK-13 pinout?
The VSC8514XMK-13 pinout is documented in the manufacturer VSC8514 datasheet rather than the distributor listings. The device uses a 138-QFN 12 mm × 12 mm XMK package, so it does not map to the smaller QFN package diagrams commonly shown for unrelated parts. Assign nets from the datasheet pin-description table and preserve the exposed-pad land pattern recommended by Microchip.
What are the key specifications of VSC8514XMK-13 that engineers should know?
The VSC8514XMK-13 integrates four 10/100/1000BASE-T copper Ethernet ports into one low-power device. Its principal interfaces include QSGMII and SGMII, and the family supports Synchronous Ethernet and TDM backhaul for carrier and wireless-infrastructure systems. The package is a 138-QFN measuring 12 mm × 12 mm, with an exposed thermal pad for PCB heat dissipation.
VSC8514XMK-13 vs VSC8514XMK-14 - which is better?
The choice between VSC8514XMK-13 and VSC8514XMK-14 depends on the exact grade or ordering-code requirements, not just the shared Ethernet functionality. Both are listed for the 138-QFN 12 mm × 12 mm VSC8514 family, but the available listings do not establish every feature difference. Review the ordering information and datasheet before selecting the better industrial-temperature or configuration match.
VSC8514XMK-13 vs VSC8514XMK-11 - can either be used as a replacement?
The VSC8514XMK-13 and VSC8514XMK-11 use the same 138-QFN 12 mm × 12 mm package family, making them candidates for PCB-level substitution. Their exact ordering-code differences are not fully disclosed in the available listings, so engineers must verify grade, temperature, revision, interface options, and lifecycle requirements in the manufacturer ordering table. Do not approve the substitution solely from package identity.
When should I choose VSC8514XMK-13 over another VSC8514 ordering code?
Choose the VSC8514XMK-13 when its documented grade, temperature range, configuration, and lifecycle characteristics satisfy the target system and the required 138-QFN footprint already exists on the PCB. The part is especially relevant to four-port copper designs needing low-power Gigabit Ethernet, QSGMII or SGMII host connectivity, Synchronous Ethernet, or TDM backhaul. Compare those requirements against the exact ordering information for alternatives.
Is VSC8514XMK-13 suitable for data-center and enterprise networks?
The VSC8514XMK-13 is suitable for data-center and enterprise networking designs that use 10/100/1000BASE-T copper ports. The Microchip product page specifically identifies data centers and enterprise networks as target markets for the four-port PHY. Its low-power design and high-density package can simplify multiport equipment, subject to thermal, reach, timing, and compliance requirements for the finished product.
What can replace the VSC8514XMK-13?
The most defensible replacement candidates are the same-family VSC8514XMK-03, VSC8514XMK-11, and VSC8514XMK-14, all of which are listed in the 138-QFN 12 mm × 12 mm format. They are same-brand family alternatives rather than independently qualified substitutions. Confirm pin compatibility, electrical limits, temperature grade, feature configuration, and qualification status before replacing the VSC8514XMK-13.
What is the best drop-in replacement for VSC8514XMK-13?
No cross-brand drop-in replacement can be selected confidently from the available information. The VSC8514XMK-03, VSC8514XMK-11, and VSC8514XMK-14 preserve the 138-QFN 12 mm × 12 mm package family and are the closest same-brand candidates. Their internal grade and feature differences remain order-code-specific, so the manufacturer ordering table must be checked before treating any one as a drop-in replacement.
Where to buy VSC8514XMK-13 online?
Use the Request a Quote form on this page to request VSC8514XMK-13 availability, lead time, and a quotation for the exact ordering code. Confirm the manufacturer part number and 138-QFN packaging suffix before submitting the request. Quote requests are preferable to substituting an unchecked suffix because configuration and temperature-grade differences can affect production qualification.
What is the price of VSC8514XMK-13?
The current unit price for the VSC8514XMK-13 should be obtained through the Request a Quote form on this page. Quote responses should state the quantity, 138-QFN package code, manufacturer part number, and any required traceability or date-code conditions. This avoids stale commercial information and ensures the quotation corresponds to the exact VSC8514XMK-13 ordering code.
What is the lead time and stock status for VSC8514XMK-13?
Current lead time and stock status for the VSC8514XMK-13 should be requested through the Request a Quote form on this page. Include the required quantity, target date, and production schedule so the response can distinguish new surplus, factory allocation, and scheduled supply. Avoid treating a family-level stock statement as confirmation for the exact -13 ordering code.
Is VSC8514XMK-13 in stock?
Stock status for the exact VSC8514XMK-13 ordering code should be confirmed through the Request a Quote form on this page. The availability request should identify the required quantity and whether scheduled deliveries are acceptable. This is important because a distributor listing for another VSC8514 suffix cannot establish availability for the -13 configuration.
What PCB-layout considerations apply to VSC8514XMK-13?
The VSC8514XMK-13 requires layout that treats four Gigabit channels and the QSGMII or SGMII links as controlled-impedance interfaces. Keep input, output, and decoupling connections compact, preserve continuous return paths, and follow the manufacturer’s 138-QFN land-pattern and exposed-pad guidance. Add adequate copper for heat conduction and verify channel loss, isolation, and connector-impedance requirements in simulation.

Dữ liệu tham khảo kỹ thuật cho VSC8514XMK-13 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the VSC8514XMK-13 for four-port copper Gigabit Ethernet designs that need QSGMII or SGMII host connectivity, Synchronous Ethernet, TDM backhaul, and low-power operation in a 138-QFN 12 mm × 12 mm footprint. The VSC8514XMK-14 is appropriate when the product specifically requires the listed industrial-temperature configuration and does not need SyncE; its no-SyncE feature is a functional difference, not merely a price or packaging variation. Consider the VSC8514XMK-03 and VSC8514XMK-11 when their ordering-code grades or revisions match the design and their manufacturer documentation confirms electrical and feature compatibility. None of these same-family choices should replace a qualified part solely because the packages match. For every candidate, verify temperature range, interface mode, clocking, reference design support, lifecycle status, and exposed-pad land pattern.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này VSC8514XMK-03 VSC8514XMK-11 VSC8514XMK-14
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 138-QFN (12x12) 138-QFN (12x12) 138-QFN (12x12) 138-QFN (12x12)
Port Count 4 ports 4 ports 4 ports 4 ports
Ethernet Support 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T
Host Interface QSGMII and SGMII QSGMII and SGMII QSGMII and SGMII QSGMII with no SyncE
Synchronous Ethernet Supported Supported Supported No SyncE
TDM Backhaul Supported Supported Supported Supported
Power Architecture Single low-power supply Single low-power supply Single low-power supply Single low-power supply

Bảo phân biệt quan trọng

  • Retains Synchronous Ethernet capability (vsVSC8514XMK-14)
  • Matches the 138-QFN footprint of established same-family options (vsVSC8514XMK-03)
  • Four-port integration reduces physical interface count (vsVSC8514XMK-11)

Ghi chú thiết kế

Route each 10/100/1000BASE-T channel as a controlled-impedance differential pair and follow the manufacturer’s reference layout for connector, magnetics, and PHY spacing. Keep the QSGMII or SGMII traces short, provide uninterrupted reference planes beneath the links, and avoid splitting return paths beneath high-speed nets. Four active copper channels plus the high-speed host interface make small routing discontinuities more consequential than in a single-port design.

Use the exposed pad as a thermal path into the PCB rather than leaving it isolated. Add a manufacturer-compliant land pattern with short thermal-via connections and distribute copper where board area permits. Estimated thermal performance depends on four active ports, ambient temperature, copper area, via count, and enclosure airflow; none of those values is specified here, so determine junction-temperature margin through board-level thermal analysis rather than relying on package size alone.

Place all power and ground decoupling components directly beside their associated device terminals, with especially short return paths for the high-speed interface supplies. Keep switching supplies, magnetics, and other noisy sources away from clock and Ethernet differential routing. Confirm voltage rails, sequencing, current limits, and startup requirements against the manufacturer datasheet before selecting capacitors or converters.

Do not treat the -03, -11, -13, and -14 suffixes as interchangeable packing codes. They are distinct ordering codes whose temperature, interface, and configuration characteristics must be checked. The -14 listing explicitly identifies industrial temperature and no Synchronous Ethernet, while the -13 product family supports SyncE. A same-package device can therefore fail functionally even when the PCB footprint remains unchanged.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The product is an industrial and carrier Ethernet interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.

Tìm kiếm liên quan

VSC8514XMK-13 datasheet VSC8514XMK-13 datasheet pdf VSC8514XMK-13 pinout VSC8514XMK-13 specifications VSC8514XMK-13 equivalent VSC8514XMK-13 replacement VSC8514XMK-13 cross reference VSC8514XMK-13 vs VSC8514XMK-14 VSC8514XMK-13 vs VSC8514XMK-11 Microchip VSC8514XMK-13 VSC8514XMK-13 price VSC8514XMK-13 stock VSC8514 138-QFN pinout VSC8514 quad port Gigabit PHY VSC8514XMK-13 broadband gateway

Các bộ phận và thuật ngữ liên quan

Microchip Technology VSC8514XMK-13 VSC8514XMK-03 VSC8514XMK-11 VSC8514XMK-14 quad-port Gigabit Ethernet PHY Ethernet physical layer Gigabit Ethernet 10/100/1000BASE-T QSGMII SGMII Synchronous Ethernet TDM backhaul broadband gateway data center enterprise network wireless base station carrier equipment 138-QFN QFN family surface mount exposed thermal pad low-power operation differential pair controlled impedance
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ