Microchip Technology

VSC8514XMK-13 - Quad-Port Gigabit Ethernet PHY | Microchip

料号: VSC8514XMK-13 ✓ 量产中
138-QFN, 12 mm × 12 mm Package 10/100/1000BASE-T Speed
最小起订量: 1 |

VSC8514XMK-13 概述

The Microchip Technology VSC8514XMK-13 is a quad-port Gigabit Ethernet physical-layer transceiver, or PHY, designed for energy-efficient broadband gateways, data centers, enterprise networks, and carrier equipment. It supports four 10/100/1000BASE-T copper ports, operates from a single low-power supply, and is housed in a 138-QFN 12 mm × 12 mm package. The device also supports TDM backhaul, wireless base-station, and other carrier applications.

A Gigabit Ethernet PHY is the physical-layer component that converts digital Ethernet data into signals suitable for transmission over twisted-pair cabling and performs the complementary receive function. It sits below the Ethernet MAC in the communication hierarchy: application data passes through the MAC and network processor before reaching the PHY, which provides the physical copper-port interface. A multiport PHY consolidates four Gigabit Ethernet channels in one package, reducing component count, board area, and power-management complexity compared with four discrete ports.

The VSC8514 supports 10/100/1000BASE-T operation for enterprise and carrier networks, while its QSGMII and SGMII-family connectivity allows connection to a switching or routing device. Synchronous Ethernet support and TDM backhaul capabilities make the device applicable to infrastructure equipment requiring deterministic transport and precise timing. Its low-power operating approach is intended to improve energy efficiency in broadband gateways, data-center networking equipment, wireless base stations, and enterprise systems.

The 138-QFN package concentrates a high-speed, multiport interface into a compact 12 mm × 12 mm surface-mount footprint. Its exposed thermal pad supports heat transfer through the PCB, but thermal performance still depends on the number of active ports, copper-cable reach, supply voltage, ambient temperature, and board construction. Differential pairs for each Gigabit port require controlled PCB routing, while the high-speed serial links demand short, continuous return paths and properly modeled termination networks.

Typical installations include carrier access platforms, Ethernet aggregation equipment, enterprise routers, broadband access nodes, wireless base-station backhaul, and data-center network interfaces. In these systems, the PHY can provide four copper ports behind one host-facing interface, reducing physical interface count and simplifying control software. Designers should confirm the required MAC interface, synchronization features, reference clocks, cable reach, regulatory constraints, and thermal conditions against the manufacturer datasheet before releasing the PCB layout.

For a new layout, place decoupling capacitors close to the power terminals, route each 10/100/1000BASE-T channel as a controlled-impedance differential pair, and provide unobstructed thermal copper beneath the exposed pad. Confirm the complete power-up sequence and interface timing with the system controller. Avoid substituting a different VSC8514 ordering code until its grade, revision, and feature differences have been checked against the target design requirements.

This page organizes the product identity, verified package information, candidate same-family drop-in options, application guidance, comparison parameters, and PCB design considerations. It is intended to help engineers narrow the correct Ethernet PHY ordering code while keeping package compatibility and thermal constraints explicit.

直接替换替代料: VSC8514XMK-13 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: VSC8514XMK-13 (相同外形与封装尺寸) ——差异在于 Package, Synchronous Ethernet, Power Management.

Microchip Technology
Package: 138-pin QFN, 12 x 12 mm
Power Management: Low-power operation
对比 VSC8514XMK-13 →
Microchip Technology
Package: 138-QFN (12 x 12 mm)
Synchronous Ethernet: Not supported in the -14 configuration
Power Management: ActiPHY low-power operation
对比 VSC8514XMK-13 →

VSC8514XMK-03

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 138-QFN (12x12)
Quad-port Gigabit Ethernet PHY · 10 Mb/s, 100 Mb/s, and 1000 Mb/s · 4 ports · 3.3 V · 138-pin QFN, 12 x 12 mm · Surface mount · Supported · Supported

联系询价

查看数据手册 →

VSC8514XMK-11

✅ 直接替换 ⚠️ 规格未核验
📦 138-QFN (12x12)
Same 138-QFN 12x12 package family; exact ordering-code differences are 0% quantified in public snippets and require datasheet confirmation

📋 参考替代料(不在目录中)

VSC8514XMK-14

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 138-QFN (12x12)
4 ports · 10/100/1000BASE-T · Copper Ethernet · QGMII · Not supported in the -14 configuration · Industrial temperature · 138-QFN (12 x 12 mm) · Surface mount

联系询价

查看数据手册 →

VSC8514XMK-13 规格参数

Product Type Quad-port Gigabit Ethernet PHY
Number of Ports 4 ports
Ethernet Speed 10/100/1000BASE-T
Medium Copper twisted-pair
Host Interface QSGMII and SGMII
Synchronous Ethernet Supported
TDM Backhaul Supported
Application Areas Broadband gateways, data centers, enterprise networks, wireless base stations, and carrier equipment
Power Architecture Single low-power supply
封装 138-QFN, 12 mm × 12 mm
安装类型 Surface mount
Package Code XMK
Exposed Thermal Pad Present

VSC8514XMK-13 xmk 引脚配置指南

VSC8514XMK-13(xmk 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

VSC8514XMK-13 的 xmk 封装引脚图

暂无详细引脚数据: VSC8514XMK-13.

请参阅 数据手册 以查看完整引脚配置。

典型应用

VSC8514XMK-13 适用于 6 应用s: Enterprise Network Equipment, Data-Center Network Interfaces, Broadband Gateway and CPE, Wireless Base-Station Backhaul, Industrial Ethernet Control, Carrier Access and TDM Transport.

🌐

Enterprise Network Equipment

The VSC8514XMK-13 is appropriate for enterprise switches, routers, and access appliances requiring four Gigabit Ethernet copper ports in one device. Its 10/100/1000BASE-T capability covers common LAN links, while QSGMII or SGMII connectivity provides a high-speed path to a switching or routing block. Consolidating four PHYs in one 138-QFN package reduces board area and power-management overhead. Designers should reserve space for the exposed thermal pad, preserve controlled-impedance routing on every copper channel, and verify that the selected ordering code supports the required temperature grade and interface configuration.

🖥️

Data-Center Network Interfaces

The VSC8514XMK-13 can support low-power copper-facing network interfaces in data-center switches, servers, and edge aggregation equipment. Four integrated 10/100/1000BASE-T ports allow one PHY device to serve multiple 1 GbE links while the QSGMII or SGMII interface connects to a central switching fabric. The low-power operating approach helps control system consumption in densely deployed equipment. Thermal and signal-integrity planning remain critical because four active channels, the 12 mm × 12 mm QFN package, and high-speed serial links can concentrate heat and demand precise return-path routing.

📱

Broadband Gateway and CPE

The VSC8514XMK-13 fits broadband gateways and customer-premises equipment that need several Gigabit Ethernet service ports without using four separate PHY packages. Four 10/100/1000BASE-T channels provide LAN connectivity for home gateways, fiber termination systems, and enterprise CPE, while the host-facing serial interface transfers traffic to an access processor. Low-power operation is valuable where continuously connected customer equipment must meet energy-efficiency targets. The PCB should place the PHY close to the Ethernet connectors, follow differential-pair geometry rules, and provide adequate exposed-pad cooling for sustained multi-port traffic.

🌐

Wireless Base-Station Backhaul

The VSC8514XMK-13 is applicable to wireless base-station and carrier backhaul equipment because the family supports TDM backhaul, Synchronous Ethernet, and four copper Gigabit Ethernet ports. These capabilities allow equipment designers to combine traffic transport and precision timing functions around a multiport copper interface. The QSGMII or SGMII connection supports high-bandwidth aggregation toward a network processor or switch. Before deployment, verify the exact clocking, Synchronous Ethernet configuration, interface timing, and temperature requirements for the base-station environment using the manufacturer documentation.

🏭

Industrial Ethernet Control

The VSC8514XMK-13 can support industrial controllers, factory communication equipment, and managed automation endpoints requiring four Gigabit Ethernet ports. Its consolidated PHY architecture simplifies the physical-layer portion of a multiport industrial network while retaining SGMII and QSGMII-class host connectivity. Industrial implementations must confirm the ordering code’s temperature grade, isolation requirements, conducted-emissions expectations, and long-term component availability. PCB design should separate sensitive clocking and power paths from Ethernet differential pairs, use manufacturer-recommended filtering and terminations, and preserve thermal continuity beneath the QFN exposed pad.

🌐

Carrier Access and TDM Transport

The VSC8514XMK-13 fits carrier-access platforms and transport equipment that combine four 10/100/1000BASE-T service ports with TDM backhaul and Synchronous Ethernet capability. These features allow a network appliance to manage multiple access links while maintaining timing relationships across the system. The 138-QFN package provides a compact implementation, but four active copper PHYs require careful thermal design and channel-layout discipline. Engineers should confirm clock architecture, TDM lane behavior, line-rate limits, cable reach, and regulatory requirements for the finished carrier system before committing the layout.

What is the VSC8514XMK-13?
The VSC8514XMK-13 is a Microchip Technology quad-port Gigabit Ethernet PHY for 10/100/1000BASE-T copper networks. It provides four physical-layer ports in a 138-QFN 12 mm × 12 mm package and supports QSGMII, SGMII, Synchronous Ethernet, and TDM backhaul. According to the Microchip VSC8514 product page, it targets low-power broadband gateways, data centers, enterprise networks, wireless base stations, and carrier equipment.
Where can I download the VSC8514XMK-13 datasheet PDF?
The VSC8514XMK-13 datasheet PDF is available from the Microchip VSC8514 product page and the linked VSC8514 datasheet document. The document identifies the family as a quad-port 10/100/1000BASE-T PHY with Synchronous Ethernet and QSGMII MAC support. Use the manufacturer datasheet for authoritative pin assignments, electrical limits, timing, register information, and application-circuit details.
Where can I find the VSC8514XMK-13 pinout?
The VSC8514XMK-13 pinout is documented in the manufacturer VSC8514 datasheet rather than the distributor listings. The device uses a 138-QFN 12 mm × 12 mm XMK package, so it does not map to the smaller QFN package diagrams commonly shown for unrelated parts. Assign nets from the datasheet pin-description table and preserve the exposed-pad land pattern recommended by Microchip.
What are the key specifications of VSC8514XMK-13 that engineers should know?
The VSC8514XMK-13 integrates four 10/100/1000BASE-T copper Ethernet ports into one low-power device. Its principal interfaces include QSGMII and SGMII, and the family supports Synchronous Ethernet and TDM backhaul for carrier and wireless-infrastructure systems. The package is a 138-QFN measuring 12 mm × 12 mm, with an exposed thermal pad for PCB heat dissipation.
VSC8514XMK-13 vs VSC8514XMK-14 - which is better?
The choice between VSC8514XMK-13 and VSC8514XMK-14 depends on the exact grade or ordering-code requirements, not just the shared Ethernet functionality. Both are listed for the 138-QFN 12 mm × 12 mm VSC8514 family, but the available listings do not establish every feature difference. Review the ordering information and datasheet before selecting the better industrial-temperature or configuration match.
VSC8514XMK-13 vs VSC8514XMK-11 - can either be used as a replacement?
The VSC8514XMK-13 and VSC8514XMK-11 use the same 138-QFN 12 mm × 12 mm package family, making them candidates for PCB-level substitution. Their exact ordering-code differences are not fully disclosed in the available listings, so engineers must verify grade, temperature, revision, interface options, and lifecycle requirements in the manufacturer ordering table. Do not approve the substitution solely from package identity.
When should I choose VSC8514XMK-13 over another VSC8514 ordering code?
Choose the VSC8514XMK-13 when its documented grade, temperature range, configuration, and lifecycle characteristics satisfy the target system and the required 138-QFN footprint already exists on the PCB. The part is especially relevant to four-port copper designs needing low-power Gigabit Ethernet, QSGMII or SGMII host connectivity, Synchronous Ethernet, or TDM backhaul. Compare those requirements against the exact ordering information for alternatives.
Is VSC8514XMK-13 suitable for data-center and enterprise networks?
The VSC8514XMK-13 is suitable for data-center and enterprise networking designs that use 10/100/1000BASE-T copper ports. The Microchip product page specifically identifies data centers and enterprise networks as target markets for the four-port PHY. Its low-power design and high-density package can simplify multiport equipment, subject to thermal, reach, timing, and compliance requirements for the finished product.
What can replace the VSC8514XMK-13?
The most defensible replacement candidates are the same-family VSC8514XMK-03, VSC8514XMK-11, and VSC8514XMK-14, all of which are listed in the 138-QFN 12 mm × 12 mm format. They are same-brand family alternatives rather than independently qualified substitutions. Confirm pin compatibility, electrical limits, temperature grade, feature configuration, and qualification status before replacing the VSC8514XMK-13.
What is the best drop-in replacement for VSC8514XMK-13?
No cross-brand drop-in replacement can be selected confidently from the available information. The VSC8514XMK-03, VSC8514XMK-11, and VSC8514XMK-14 preserve the 138-QFN 12 mm × 12 mm package family and are the closest same-brand candidates. Their internal grade and feature differences remain order-code-specific, so the manufacturer ordering table must be checked before treating any one as a drop-in replacement.
Where to buy VSC8514XMK-13 online?
Use the Request a Quote form on this page to request VSC8514XMK-13 availability, lead time, and a quotation for the exact ordering code. Confirm the manufacturer part number and 138-QFN packaging suffix before submitting the request. Quote requests are preferable to substituting an unchecked suffix because configuration and temperature-grade differences can affect production qualification.
What is the price of VSC8514XMK-13?
The current unit price for the VSC8514XMK-13 should be obtained through the Request a Quote form on this page. Quote responses should state the quantity, 138-QFN package code, manufacturer part number, and any required traceability or date-code conditions. This avoids stale commercial information and ensures the quotation corresponds to the exact VSC8514XMK-13 ordering code.
What is the lead time and stock status for VSC8514XMK-13?
Current lead time and stock status for the VSC8514XMK-13 should be requested through the Request a Quote form on this page. Include the required quantity, target date, and production schedule so the response can distinguish new surplus, factory allocation, and scheduled supply. Avoid treating a family-level stock statement as confirmation for the exact -13 ordering code.
Is VSC8514XMK-13 in stock?
Stock status for the exact VSC8514XMK-13 ordering code should be confirmed through the Request a Quote form on this page. The availability request should identify the required quantity and whether scheduled deliveries are acceptable. This is important because a distributor listing for another VSC8514 suffix cannot establish availability for the -13 configuration.
What PCB-layout considerations apply to VSC8514XMK-13?
The VSC8514XMK-13 requires layout that treats four Gigabit channels and the QSGMII or SGMII links as controlled-impedance interfaces. Keep input, output, and decoupling connections compact, preserve continuous return paths, and follow the manufacturer’s 138-QFN land-pattern and exposed-pad guidance. Add adequate copper for heat conduction and verify channel loss, isolation, and connector-impedance requirements in simulation.

工程参考数据: VSC8514XMK-13 ——对比、设计指导和合规信息。

选型指南

Choose the VSC8514XMK-13 for four-port copper Gigabit Ethernet designs that need QSGMII or SGMII host connectivity, Synchronous Ethernet, TDM backhaul, and low-power operation in a 138-QFN 12 mm × 12 mm footprint. The VSC8514XMK-14 is appropriate when the product specifically requires the listed industrial-temperature configuration and does not need SyncE; its no-SyncE feature is a functional difference, not merely a price or packaging variation. Consider the VSC8514XMK-03 and VSC8514XMK-11 when their ordering-code grades or revisions match the design and their manufacturer documentation confirms electrical and feature compatibility. None of these same-family choices should replace a qualified part solely because the packages match. For every candidate, verify temperature range, interface mode, clocking, reference design support, lifecycle status, and exposed-pad land pattern.

与替代料对比

参数 本产品 VSC8514XMK-03 VSC8514XMK-11 VSC8514XMK-14
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 138-QFN (12x12) 138-QFN (12x12) 138-QFN (12x12) 138-QFN (12x12)
Port Count 4 ports 4 ports 4 ports 4 ports
Ethernet Support 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T
Host Interface QSGMII and SGMII QSGMII and SGMII QSGMII and SGMII QSGMII with no SyncE
Synchronous Ethernet Supported Supported Supported No SyncE
TDM Backhaul Supported Supported Supported Supported
Power Architecture Single low-power supply Single low-power supply Single low-power supply Single low-power supply

关键差异点

  • Retains Synchronous Ethernet capability (对比 VSC8514XMK-14)
  • Matches the 138-QFN footprint of established same-family options (对比 VSC8514XMK-03)
  • Four-port integration reduces physical interface count (对比 VSC8514XMK-11)

设计说明

Route each 10/100/1000BASE-T channel as a controlled-impedance differential pair and follow the manufacturer’s reference layout for connector, magnetics, and PHY spacing. Keep the QSGMII or SGMII traces short, provide uninterrupted reference planes beneath the links, and avoid splitting return paths beneath high-speed nets. Four active copper channels plus the high-speed host interface make small routing discontinuities more consequential than in a single-port design.

Use the exposed pad as a thermal path into the PCB rather than leaving it isolated. Add a manufacturer-compliant land pattern with short thermal-via connections and distribute copper where board area permits. Estimated thermal performance depends on four active ports, ambient temperature, copper area, via count, and enclosure airflow; none of those values is specified here, so determine junction-temperature margin through board-level thermal analysis rather than relying on package size alone.

Place all power and ground decoupling components directly beside their associated device terminals, with especially short return paths for the high-speed interface supplies. Keep switching supplies, magnetics, and other noisy sources away from clock and Ethernet differential routing. Confirm voltage rails, sequencing, current limits, and startup requirements against the manufacturer datasheet before selecting capacitors or converters.

Do not treat the -03, -11, -13, and -14 suffixes as interchangeable packing codes. They are distinct ordering codes whose temperature, interface, and configuration characteristics must be checked. The -14 listing explicitly identifies industrial temperature and no Synchronous Ethernet, while the -13 product family supports SyncE. A same-package device can therefore fail functionally even when the PCB footprint remains unchanged.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product is an industrial and carrier Ethernet interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.

相关搜索

VSC8514XMK-13 datasheet VSC8514XMK-13 datasheet pdf VSC8514XMK-13 pinout VSC8514XMK-13 specifications VSC8514XMK-13 equivalent VSC8514XMK-13 replacement VSC8514XMK-13 cross reference VSC8514XMK-13 vs VSC8514XMK-14 VSC8514XMK-13 vs VSC8514XMK-11 Microchip VSC8514XMK-13 VSC8514XMK-13 price VSC8514XMK-13 stock VSC8514 138-QFN pinout VSC8514 quad port Gigabit PHY VSC8514XMK-13 broadband gateway

相关元器件 & 术语

Microchip Technology VSC8514XMK-13 VSC8514XMK-03 VSC8514XMK-11 VSC8514XMK-14 quad-port Gigabit Ethernet PHY Ethernet physical layer Gigabit Ethernet 10/100/1000BASE-T QSGMII SGMII Synchronous Ethernet TDM backhaul broadband gateway data center enterprise network wireless base station carrier equipment 138-QFN QFN family surface mount exposed thermal pad low-power operation differential pair controlled impedance
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情