WM8805GEDS/RV - 8:1 S/PDIF Audio Transceiver | Cirrus Logic
MPN: WM8805GEDS/RV ✗ Cuối đờiWM8805GEDS/RV Tóm tắt
A digital audio transceiver is an interface IC that converts between digital audio data streams, clock signals, and electrical serial links. The WM8805 belongs to the S/PDIF transceiver category, where S/PDIF is a consumer-mode digital audio interface used to carry PCM audio between source components, receivers, amplifiers, and recording equipment. Its receive and transmit sections place multiple digital audio channels behind one device.
Key features include eight received channels, one transmitted channel, support for 32 kHz through 192 kHz operation, a PLL-based clock architecture, and 50 ps RMS intrinsic period jitter according to the ChipApex technical listing. The device also complies with IEC 60958-3, covering the digital-audio interface requirements relevant to professional and consumer audio equipment.
The WM8805 accepts a crystal-derived or externally supplied high-quality main clock, allowing the transceiver to recover S/PDIF clocks with low jitter and generate commonly used audio clocks. This architecture allows a system designer to centralize clock recovery and distribution while reducing the number of separate digital-interface devices.
Typical applications include professional audio equipment, multi-channel receivers, digital mixing consoles, set-top boxes, DVD and Blu-ray disc systems, home theater components, and other consumer products with multiple S/PDIF inputs. The eight-channel receiver is especially useful when a product must accept several digital audio sources and route or convert them through one interface IC.
When laying out a design, treat the main clock, S/PDIF data, and ground return paths as high-speed digital connections. Follow the pin-description and application-schematic tables in the manufacturer datasheet for decoupling, clock connection, and input termination. Verify the required channel count, supported sample rate, and master-clock source before assigning pins, because the 28-lead SSOP footprint cannot be reused for a device with a different transceiver architecture.
This page consolidates channel counts, supported sampling rates, package information, lifecycle status, equivalent-part guidance, and application-oriented design notes into one engineering reference for the WM8805GEDS/RV.
Bộ thay thế dễ dàng lắp đặt cho WM8805GEDS/RV — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với WM8805GEDS/RV (cùng hình factor và footprint) — khác nhau ở Operating Temperature Range, Package, Product Type.
WM8804GEDS/RV
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →WM8805GEDS/RV Tỷ lệ tối đa & tính chất điện
| Product Type | S/PDIF digital audio transceiver |
| Received Channels | 8 channels |
| Transmitted Channels | 1 channel |
| Supported Sample Rate | 32 kHz to 192 kHz |
| Interface Mode | Consumer-mode S/PDIF |
| Intrinsic Period Jitter | 50 ps RMS |
| Standard Compliance | IEC 60958-3 |
| Clock Architecture | PLL-based clock recovery and audio clock generation |
| Main Clock Source | Crystal-derived or externally supplied high-quality main clock |
| Hộp | 28-lead SSOP, 0.209 in x 5.30 mm |
| Terminal Shape | Gull wing |
| Khoảng nhiệt độ hoạt động | -40 °C to 85 °C |
| Temperature Grade | Industrial |
| Trạng thái vòng đời | Discontinued |
| Product Category | Integrated Circuits (ICs), Audio Special Purpose / Interface ICs |
Hướng dẫn cấu hình chân WM8805GEDS/RV 28-lead ssop, 0.209 in x 5.30 mm
Cấu hình chân cho WM8805GEDS/RV (28-lead ssop, 0.209 in x 5.30 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho WM8805GEDS/RV.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
WM8805GEDS/RV phù hợp cho 6 Áp dụngs: Multi-Channel Professional Audio Receiver, Home Theater and Media Hub, Digital Audio Mixing Console, Set-Top Box and Digital Audio Source, Digital Audio Interface for Active Speakers, Digital Recording and Broadcast Interface.
Multi-Channel Professional Audio Receiver
The WM8805GEDS/RV fits professional audio receivers that must accept multiple digital sources because it provides eight received S/PDIF channels and one transmitted channel. According to the Cirrus Logic WM8805 product page, the device supports 32 kHz to 192 kHz operation and recovers clocks from a crystal-derived or externally supplied main clock. In a receiver chassis, this allows several digital feeds to enter one interface stage before routing to the internal DSP or digital mixer. The 50 ps RMS intrinsic period jitter specification supports low-jitter clock recovery, although the complete system budget also depends on the clock source and PCB return paths.
Được đề xuất
Home Theater and Media Hub
The WM8805GEDS/RV is appropriate for a home-theater controller that accepts several S/PDIF sources and must present a consistent digital-audio stream to downstream logic. Its eight receive channels reduce the need for several separate receiver ICs, while the single transmit channel supports clock and data distribution within the chassis. Operation across 32 kHz to 192 kHz covers common consumer audio rates. The main clock should be derived or supplied according to the manufacturer clocking guidance, and S/PDIF data and clock traces should be routed away from noisy switching and amplifier stages.
Được đề xuất
Digital Audio Mixing Console
A digital mixing console can use the WM8805GEDS/RV to gather multiple S/PDIF inputs and recover a common low-jitter clock before the signals enter the console's processing fabric. The eight-channel receiver matches console architecture better than a single-channel interface, while the PLL architecture supports generation of commonly used audio clocks for internal distribution. Since the WM8805GEDS/RV supports sample rates from 32 kHz to 192 kHz, one interface can cover multiple professional and consumer rates. Keep the recovered clock distribution symmetric and use the pin descriptions and reference layout in the manufacturer documentation.
Được đề xuất
Set-Top Box and Digital Audio Source
The WM8805GEDS/RV can serve as the digital-audio interface in a set-top box or disc-based source that receives multiple S/PDIF streams and forwards one output. Its single transmitter suits a device with one principal digital-audio output, while the eight-channel receiver allows the chassis to monitor or route several incoming streams. The 32 kHz to 192 kHz operating range accommodates the audio rates commonly encountered in consumer playback equipment. Provide a stable main clock, observe the interface's power and grounding arrangements, and isolate the S/PDIF routing from switching-regulator and display-timing circuitry.
Được đề xuất
Digital Audio Interface for Active Speakers
The WM8805GEDS/RV can support active-speaker and soundbar architectures that receive digital audio from a host processor and distribute clocks into downstream converter stages. The single transmitted channel provides a common digital-audio path, and the PLL-based clock generation can supply the audio timing required by multiple converters. Because the intrinsic period jitter figure is 50 ps RMS, clean clock routing is essential for preserving that performance. Place the transceiver close to the digital-audio connector or processor interface and keep the return path continuous through the connector, FPGA, or processor ground reference.
Được đề xuất
Digital Recording and Broadcast Interface
The WM8805GEDS/RV can be used in digital recording equipment to accept several S/PDIF sources and deliver one channel group to the recording architecture. Its eight received channels are useful for professional monitoring and multi-source capture systems, and its 32 kHz to 192 kHz range supports common broadcast, studio, and consumer rates. IEC 60958-3 compliance, as stated by the ChipApex listing, makes the interface relevant to standardized digital-audio interconnects. Confirm all supported modes and clock ratios in the datasheet, and use a clean master-clock source because upstream source jitter cannot be recovered by the device alone.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho WM8805GEDS/RV — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | WM8804GEDS/RV |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 28-lead SSOP, 0.209 in x 5.30 mm | 28-SSOP |
| Product Type | Consumer-mode S/PDIF digital audio transceiver | Similar digital audio transceiver in the same family |
Bảo phân biệt quan trọng
- Eight-channel S/PDIF receiver (vsWM8804GEDS/RV)
- Broad 32 kHz to 192 kHz operating range (vsWM8804GEDS/RV)
- Low intrinsic period jitter (vsWM8804GEDS/RV)
- Eight-to-one channel consolidation (vsCS8406-CSZ)
Ghi chú thiết kế
Route the main clock and S/PDIF data as controlled digital signals with continuous return paths. Keep the clock source, transceiver, and downstream clock consumers close enough to control skew, and avoid routing these nets beneath switching-converter power stages. Use the manufacturer reference schematic and pin descriptions to reproduce the intended grounding and decoupling arrangement before translating the design to a new board.
Digital-audio timing quality depends on the complete clock chain, not only the transceiver's 50 ps RMS intrinsic period jitter. Use a low-noise clock source, keep S/PDIF data and clock paths away from high-current switching nodes, and maintain a nearby ground reference under each interface. Validate recovered-clock jitter and data integrity with an oscilloscope or dedicated audio-interface test equipment across every supported sample rate.
Do not treat the WM8804GEDS/RV or CS8406-CSZ as an automatic substitute. The WM8805GEDS/RV has eight received channels and one transmitted channel, and its pin functions must match the target board. Before replacing the device, compare input count, transmitter routing, main-clock requirements, PLL configuration, power pins, package dimensions, and software or firmware register expectations. Redesign and validate the PCB when any of these items differ.
Thông tin tuân thủ
The technical listing states compliance with IEC 60958-3. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not established by the manufacturer page or distributor descriptions.