最后一次采购通知: WM8805GEDS/RV 即将停产。最后下单日期: 联系我们. 查看可用的替代料号 →
Cirrus Logic Inc.

WM8805GEDS/RV - 8:1 S/PDIF Audio Transceiver | Cirrus Logic

料号: WM8805GEDS/RV ✗ 停产
28-lead SSOP, 0.209 in x 5.30 mm Package PLL-based clock recovery and audio clock generation Speed
最小起订量: 1 |

WM8805GEDS/RV 概述

Cirrus Logic WM8805GEDS/RV is a high-performance consumer-mode S/PDIF digital audio interface transceiver with eight receive channels and one transmit channel, packaged in a 28-lead SSOP. It supports sample rates from 32 kHz to 192 kHz and provides a jitter-attenuating phase-locked loop for clock recovery and audio clock generation.

A digital audio transceiver is an interface IC that converts between digital audio data streams, clock signals, and electrical serial links. The WM8805 belongs to the S/PDIF transceiver category, where S/PDIF is a consumer-mode digital audio interface used to carry PCM audio between source components, receivers, amplifiers, and recording equipment. Its receive and transmit sections place multiple digital audio channels behind one device.

Key features include eight received channels, one transmitted channel, support for 32 kHz through 192 kHz operation, a PLL-based clock architecture, and 50 ps RMS intrinsic period jitter according to the ChipApex technical listing. The device also complies with IEC 60958-3, covering the digital-audio interface requirements relevant to professional and consumer audio equipment.

The WM8805 accepts a crystal-derived or externally supplied high-quality main clock, allowing the transceiver to recover S/PDIF clocks with low jitter and generate commonly used audio clocks. This architecture allows a system designer to centralize clock recovery and distribution while reducing the number of separate digital-interface devices.

Typical applications include professional audio equipment, multi-channel receivers, digital mixing consoles, set-top boxes, DVD and Blu-ray disc systems, home theater components, and other consumer products with multiple S/PDIF inputs. The eight-channel receiver is especially useful when a product must accept several digital audio sources and route or convert them through one interface IC.

When laying out a design, treat the main clock, S/PDIF data, and ground return paths as high-speed digital connections. Follow the pin-description and application-schematic tables in the manufacturer datasheet for decoupling, clock connection, and input termination. Verify the required channel count, supported sample rate, and master-clock source before assigning pins, because the 28-lead SSOP footprint cannot be reused for a device with a different transceiver architecture.

This page consolidates channel counts, supported sampling rates, package information, lifecycle status, equivalent-part guidance, and application-oriented design notes into one engineering reference for the WM8805GEDS/RV.

直接替换替代料: WM8805GEDS/RV ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: WM8805GEDS/RV (相同外形与封装尺寸) ——差异在于 Operating Temperature Range, Package, Product Type.

Cirrus Logic Inc.
Operating Temperature Range: -40 °C to +85 °C
Package: 28-pin SSOP
Product Type: 8:1 digital audio interface transceiver with PLL

WM8804GEDS/RV

✅ 直接替换
Cirrus Logic Inc.
📦 28-SSOP
Consumer-mode S/PDIF digital audio transceiver · 1 channel · 1 channel · 1:1 transmit-to-receive · Crystal-derived or externally provided main clock · Integrated PLL with clock recovery and generation · Commonly used audio clocks · 20-lead SSOP

联系询价

查看数据手册 →

WM8805GEDS/RV 最大额定值与电气特性

Product Type S/PDIF digital audio transceiver
Received Channels 8 channels
Transmitted Channels 1 channel
Supported Sample Rate 32 kHz to 192 kHz
Interface Mode Consumer-mode S/PDIF
Intrinsic Period Jitter 50 ps RMS
Standard Compliance IEC 60958-3
Clock Architecture PLL-based clock recovery and audio clock generation
Main Clock Source Crystal-derived or externally supplied high-quality main clock
封装 28-lead SSOP, 0.209 in x 5.30 mm
Terminal Shape Gull wing
工作温度范围 -40 °C to 85 °C
Temperature Grade Industrial
生命周期状态 Discontinued
Product Category Integrated Circuits (ICs), Audio Special Purpose / Interface ICs

WM8805GEDS/RV 28-lead ssop, 0.209 in x 5.30 mm 引脚配置指南

WM8805GEDS/RV(28-lead ssop, 0.209 in x 5.30 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

WM8805GEDS/RV 的 28-lead ssop, 0.209 in x 5.30 mm 封装引脚图

暂无详细引脚数据: WM8805GEDS/RV.

请参阅 数据手册 以查看完整引脚配置。

典型应用

WM8805GEDS/RV 适用于 6 应用s: Multi-Channel Professional Audio Receiver, Home Theater and Media Hub, Digital Audio Mixing Console, Set-Top Box and Digital Audio Source, Digital Audio Interface for Active Speakers, Digital Recording and Broadcast Interface.

🎧

Multi-Channel Professional Audio Receiver

The WM8805GEDS/RV fits professional audio receivers that must accept multiple digital sources because it provides eight received S/PDIF channels and one transmitted channel. According to the Cirrus Logic WM8805 product page, the device supports 32 kHz to 192 kHz operation and recovers clocks from a crystal-derived or externally supplied main clock. In a receiver chassis, this allows several digital feeds to enter one interface stage before routing to the internal DSP or digital mixer. The 50 ps RMS intrinsic period jitter specification supports low-jitter clock recovery, although the complete system budget also depends on the clock source and PCB return paths.

📺

Home Theater and Media Hub

The WM8805GEDS/RV is appropriate for a home-theater controller that accepts several S/PDIF sources and must present a consistent digital-audio stream to downstream logic. Its eight receive channels reduce the need for several separate receiver ICs, while the single transmit channel supports clock and data distribution within the chassis. Operation across 32 kHz to 192 kHz covers common consumer audio rates. The main clock should be derived or supplied according to the manufacturer clocking guidance, and S/PDIF data and clock traces should be routed away from noisy switching and amplifier stages.

🎚️

Digital Audio Mixing Console

A digital mixing console can use the WM8805GEDS/RV to gather multiple S/PDIF inputs and recover a common low-jitter clock before the signals enter the console's processing fabric. The eight-channel receiver matches console architecture better than a single-channel interface, while the PLL architecture supports generation of commonly used audio clocks for internal distribution. Since the WM8805GEDS/RV supports sample rates from 32 kHz to 192 kHz, one interface can cover multiple professional and consumer rates. Keep the recovered clock distribution symmetric and use the pin descriptions and reference layout in the manufacturer documentation.

📱

Set-Top Box and Digital Audio Source

The WM8805GEDS/RV can serve as the digital-audio interface in a set-top box or disc-based source that receives multiple S/PDIF streams and forwards one output. Its single transmitter suits a device with one principal digital-audio output, while the eight-channel receiver allows the chassis to monitor or route several incoming streams. The 32 kHz to 192 kHz operating range accommodates the audio rates commonly encountered in consumer playback equipment. Provide a stable main clock, observe the interface's power and grounding arrangements, and isolate the S/PDIF routing from switching-regulator and display-timing circuitry.

🔊

Digital Audio Interface for Active Speakers

The WM8805GEDS/RV can support active-speaker and soundbar architectures that receive digital audio from a host processor and distribute clocks into downstream converter stages. The single transmitted channel provides a common digital-audio path, and the PLL-based clock generation can supply the audio timing required by multiple converters. Because the intrinsic period jitter figure is 50 ps RMS, clean clock routing is essential for preserving that performance. Place the transceiver close to the digital-audio connector or processor interface and keep the return path continuous through the connector, FPGA, or processor ground reference.

🖥️

Digital Recording and Broadcast Interface

The WM8805GEDS/RV can be used in digital recording equipment to accept several S/PDIF sources and deliver one channel group to the recording architecture. Its eight received channels are useful for professional monitoring and multi-source capture systems, and its 32 kHz to 192 kHz range supports common broadcast, studio, and consumer rates. IEC 60958-3 compliance, as stated by the ChipApex listing, makes the interface relevant to standardized digital-audio interconnects. Confirm all supported modes and clock ratios in the datasheet, and use a clean master-clock source because upstream source jitter cannot be recovered by the device alone.

What is the WM8805GEDS/RV?
The WM8805GEDS/RV is a high-performance consumer-mode S/PDIF digital audio transceiver from Cirrus Logic. According to the Cirrus Logic WM8805 product page, it supports eight received channels and one transmitted channel. The device is supplied in a 28-lead SSOP package and is intended for digital audio routing, clock recovery, and clock-generation applications in consumer and professional equipment.
How many S/PDIF channels does the WM8805GEDS/RV support?
The WM8805GEDS/RV supports eight received channels and one transmitted channel. The Cirrus Logic WM8805 product page describes the part as an 8:1 digital interface transceiver, while the GlobalSpec listing likewise identifies eight receive channels. This channel arrangement suits products that must accept multiple digital-audio sources through one interface device and present a single transmitted channel to downstream circuitry.
What sample rates does the WM8805GEDS/RV support?
The WM8805GEDS/RV supports sample rates from 32 kHz to 192 kHz. According to the GlobalSpec component listing, the device is specified across this range and is associated with professional audio applications. The exact supported rate for each operating mode and the required main-clock frequency should be confirmed against the manufacturer datasheet before the clock tree is finalized.
What is the jitter performance of the WM8805GEDS/RV?
The WM8805GEDS/RV has an intrinsic period jitter of 50 ps RMS according to the ChipApex technical listing. Its PLL-based architecture is intended to recover low-jitter clocks from the S/PDIF main clock. Because system jitter also depends on the external clock source, crystal characteristics, PCB return paths, and downstream clock-generation settings, use the 50 ps RMS figure as an intrinsic device specification rather than a complete end-to-end jitter budget.
What standards does the WM8805GEDS/RV comply with?
The WM8805GEDS/RV complies with IEC 60958-3 according to the ChipApex product listing. This standard addresses the digital-audio interface format associated with professional digital audio applications. Compliance establishes the expected interface behavior, but board-level EMC, ESD, and signal-integrity performance still depend on the external circuitry and the layout methods described in the manufacturer application guidance.
Where can I download the WM8805GEDS/RV datasheet?
The WM8805GEDS/RV datasheet can be obtained through the official Cirrus Logic WM8805 product page at https://www.cirrus.com/products/wm8805. The product page identifies the device as an S/PDIF digital interface transceiver. For a mirrored PDF, the Datasheet Directory entry also links to the WM8805GEDS documentation, which contains the pin descriptions, electrical characteristics, and application information needed for schematic capture.
Where can I find the WM8805GEDS/RV pinout?
The WM8805GEDS/RV pinout is published in the WM8805GEDS manufacturer datasheet rather than on the distributor landing pages. The part is a 28-lead gull-wing SSOP with a 0.209 in by 5.30 mm body, as stated by the GlobalSpec and Vyrian listings. Use the pin-description table in the datasheet when assigning S/PDIF data, clock, power, and ground nets so that each net matches the manufacturer numbering.
Is the WM8805GEDS/RV still active?
No, the Cirrus Logic WM8805 product page labels the WM8805 as discontinued. The WM8805GEDS/RV ordering code remains listed by distributors, including DigiKey, Mouser, and Octopart, which means sourcing activity can continue even though the manufacturer no longer markets the family as active. Confirm lifecycle status and sourcing terms with the manufacturer before starting a new long-running production program.
What is the best drop-in replacement for the WM8805GEDS/RV?
The closest identified same-family alternative is the Cirrus Logic WM8804GEDS/RV. The cross-reference listing describes it as a similar digital audio transceiver with comparable core functionality, although channel-count, clock, and feature differences must be checked against the WM8805 datasheet before substitution. Because the WM8805 family is discontinued, engineers should also assess the CS8406-CSZ when a functionally similar S/PDIF interface is acceptable rather than an exact pin-compatible substitution.
Can the WM8804GEDS/RV replace the WM8805GEDS/RV?
The WM8804GEDS/RV can be considered for a board-level replacement only after its pin and channel functions are verified. A cross-reference listing identifies it as a similar transceiver in the same Cirrus Logic family, but it does not establish identical channel counts or identical clock behavior. Treat it as a conditional drop-in candidate and compare the two datasheets, particularly the S/PDIF input count, transmitter routing, PLL configuration, and power pins.
What can replace the WM8805GEDS/RV in a digital audio design?
Two replacement paths are identified for the WM8805GEDS/RV: the Cirrus Logic WM8804GEDS/RV for a similar same-family transceiver, and the Cirrus Logic CS8406-CSZ for a functionally comparable S/PDIF transmitter/receiver. The WM8804 is the more direct candidate when package and pin assignments match, while the CS8406-CSZ may require schematic and layout changes. Neither should be substituted solely from a generic cross-reference result.
Is the WM8805GEDS/RV suitable for professional audio equipment?
The WM8805GEDS/RV is suitable for professional digital audio interfaces within its specified electrical and temperature limits. The GlobalSpec listing identifies professional audio as an application, while the device supports 32 kHz to 192 kHz operation and an IEC 60958-3 interface. The -40 °C to 85 °C operating range suits industrial equipment, but final suitability depends on clock stability, channel routing, and the required audio-clock outputs.
How do I choose between the WM8805GEDS/RV and the CS8406-CSZ?
Choose the WM8805GEDS/RV when an existing design depends on its eight received channels, one transmitted channel, and documented 28-lead SSOP assignments. Consider the CS8406-CSZ when the required function is an S/PDIF transmitter/receiver and the associated board changes are acceptable. The two parts should be compared by channel count, package, pinout, supported sample rates, clock-source requirements, and PLL behavior rather than by interface name alone.
When should I choose the WM8805GEDS/RV instead of a newer digital audio interface IC?
Choose the WM8805GEDS/RV when maintaining an existing 28-lead SSOP design whose verified pin functions, clock tree, and channel count already match the device. Its eight-channel receiver makes it particularly useful in established multi-input S/PDIF architectures. For a new platform without legacy constraints, a currently active interface IC is generally preferable because the WM8805 family is discontinued and long-term supply planning becomes more difficult.
Where can I buy the WM8805GEDS/RV and what is its lead time?
The WM8805GEDS/RV can be requested through the Request a Quote form on this page. Its manufacturer product page identifies the WM8805 as discontinued, although distributor listings show continuing sourcing activity. Request the current stock position, minimum order quantity, delivery schedule, and traceable-condition requirements with the quote. Do not base production planning on historical listing status alone.
What are the key specifications of the WM8805GEDS/RV that engineers should know?
The main engineering characteristics of the WM8805GEDS/RV are eight received S/PDIF channels, one transmitted channel, 32 kHz to 192 kHz operation, a jitter-attenuating PLL, 50 ps RMS intrinsic period jitter, and IEC 60958-3 compliance. It is housed in a 28-lead SSOP and rated for -40 °C to 85 °C. Its main clock may be crystal-derived or externally supplied, which is central to the system clock architecture.
How do I use the WM8805GEDS/RV main clock?
The WM8805GEDS/RV accepts a crystal-derived or externally supplied high-quality main clock, according to the Cirrus Logic WM8805 product page. That clock supports S/PDIF clock recovery and the generation of commonly used audio clocks. Choose the source and frequency from the manufacturer clocking recommendations, then route the clock as a controlled digital signal. Incorrect clock selection can prevent correct channel operation or degrade the recovered clock quality.

工程参考数据: WM8805GEDS/RV ——对比、设计指导和合规信息。

选型指南

Choose the WM8805GEDS/RV when maintaining a 28-lead SSOP design that needs eight S/PDIF receive channels, one transmit channel, operation from 32 kHz to 192 kHz, and PLL-based clock recovery. It remains useful for service and maintenance of established professional audio, home-theater, and consumer equipment. Consider the WM8804GEDS/RV first for same-family substitution, but verify channel count, clock requirements, pin functions, and register behavior because generic equivalence does not prove a match. Consider the CS8406-CSZ when the goal is a similar digital-audio interface and schematic or layout changes are acceptable. For entirely new products, an active interface IC is usually the better long-term choice because the manufacturer labels the WM8805 family as discontinued.

与替代料对比

参数 本产品 WM8804GEDS/RV
Brand Cirrus Logic Cirrus Logic
Package 28-lead SSOP, 0.209 in x 5.30 mm 28-SSOP
Product Type Consumer-mode S/PDIF digital audio transceiver Similar digital audio transceiver in the same family

关键差异点

  • Eight-channel S/PDIF receiver (对比 WM8804GEDS/RV)
  • Broad 32 kHz to 192 kHz operating range (对比 WM8804GEDS/RV)
  • Low intrinsic period jitter (对比 WM8804GEDS/RV)
  • Eight-to-one channel consolidation (对比 CS8406-CSZ)

设计说明

Route the main clock and S/PDIF data as controlled digital signals with continuous return paths. Keep the clock source, transceiver, and downstream clock consumers close enough to control skew, and avoid routing these nets beneath switching-converter power stages. Use the manufacturer reference schematic and pin descriptions to reproduce the intended grounding and decoupling arrangement before translating the design to a new board.

Digital-audio timing quality depends on the complete clock chain, not only the transceiver's 50 ps RMS intrinsic period jitter. Use a low-noise clock source, keep S/PDIF data and clock paths away from high-current switching nodes, and maintain a nearby ground reference under each interface. Validate recovered-clock jitter and data integrity with an oscilloscope or dedicated audio-interface test equipment across every supported sample rate.

Do not treat the WM8804GEDS/RV or CS8406-CSZ as an automatic substitute. The WM8805GEDS/RV has eight received channels and one transmitted channel, and its pin functions must match the target board. Before replacing the device, compare input count, transmitter routing, main-clock requirements, PLL configuration, power pins, package dimensions, and software or firmware register expectations. Redesign and validate the PCB when any of these items differ.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The technical listing states compliance with IEC 60958-3. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not established by the manufacturer page or distributor descriptions.

相关搜索

WM8805GEDS/RV datasheet WM8805GEDS/RV pinout WM8805GEDS/RV equivalent WM8805GEDS/RV replacement WM8805GEDS/RV cross reference WM8805GEDS/RV price WM8805GEDS/RV stock Cirrus Logic WM8805GEDS/RV WM8805GEDS/RV 28 SSOP WM8805GEDS/RV 8 channel S/PDIF WM8805 vs WM8804GEDS/RV WM8805GEDS/RV vs CS8406-CSZ WM8805GEDS/RV professional audio interface WM8805GEDS/RV 32 kHz 192 kHz WM8805GEDS/RV buy online

相关元器件 & 术语

Cirrus Logic Wolfson Microelectronics WM8805GEDS/RV WM8804GEDS/RV CS8406-CSZ S/PDIF digital audio transceiver digital interface transceiver consumer-mode S/PDIF audio interface IC phase-locked loop PLL jitter attenuation intrinsic period jitter audio clock recovery IEC 60958-3 28-lead SSOP gull-wing package professional audio home theater digital mixing console 32 kHz to 192 kHz sampling eight-channel receiver one-channel transmitter
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情