XC3S1500-4FGG676I - 1.5M Gate Spartan-3 FPGA | AMD
MPN: XC3S1500-4FGG676I ✗ Cuối đờiXC3S1500-4FGG676I Tóm tắt
An FPGA is a programmable logic semiconductor whose interconnect and functional blocks are configured after manufacture. Within the product hierarchy, an FPGA is a user-programmable digital integrated circuit that can implement combinational and sequential logic, arithmetic, memory, and parallel data-processing pipelines. The Spartan-3 family combines a 90 nm fabrication process with configurable logic and dedicated resources, placing it between fixed-function ASICs and more complex programmable-logic devices.
The XC3S1500-4FGG676I provides 29,952 logic cells, 1,500,000 system gates, and a maximum stated operating frequency of 630 MHz. Its 1.2 V core supply and 676-pin FBGA package support dense, high-pin-count industrial and embedded designs. The -4 code identifies the device performance grade, while the I suffix identifies the temperature-grade option used in the exact ordering code.
Spartan-3 devices use configurable logic blocks connected by programmable routing resources. Dedicated block RAM permits efficient data buffering, while DSP resources support multipliers and arithmetic pipelines without using large numbers of general-purpose lookup logic. Design performance depends on the selected speed grade, clocking, routing, I/O standards, memory mapping, and utilization, so the 630 MHz figure should not be interpreted as a guaranteed frequency for every arbitrary design.
Typical uses include industrial automation, instrumentation, communications infrastructure, embedded control, video and image processing, networking equipment, and test-and-measurement systems. Its 29,952 logic cells and 676-ball package are appropriate for designs requiring substantial parallel logic, multiple interfaces, and moderate on-chip storage. Related programmable logic devices can be considered when a design requires larger fabric, embedded processors, advanced I/O, or a newer technology node.
PCB implementation requires careful power planning, decoupling, BGA escape routing, and thermal analysis. The 676-ball FBGA footprint demands fine-pitch assembly capability, and every power ball or group must be connected according to the package data. Signal-integrity and timing closure also depend on correct I/O standards, controlled-impedance routing, clock topology, and complete timing constraints.
This page combines exact device identification, package and technology characteristics, structured alternatives, application guidance, and PCB-focused engineering considerations. It also distinguishes directly orderable suffix variants from broader Spartan-3 options and distinguishes true pin-compatible replacements from parts that require a redesigned footprint.
Bộ thay thế dễ dàng lắp đặt cho XC3S1500-4FGG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC3S1500-4FGG676I (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Temperature Grade, Mounting Type, Programmable Logic Type.
XC3S1500-4FGG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC3S1500-4FG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC3S1500-5FGG676I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC3S1500-5FGG676C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC3S1500-2FGG676I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC3S1500-4FGG676I Tỷ lệ tối đa & tính chất điện
| Device Type | Spartan-3 Field Programmable Gate Array (FPGA) |
| System Gates | 1,500,000 gates |
| Logic Cells | 29,952 cells |
| Maximum Stated Frequency | 630 MHz |
| Core Supply Voltage | 1.2 V |
| Technology | 90 nm |
| Performance Grade | -4 |
| Hộp | 676-pin FBGA |
| Package Ball Count | 676 balls |
| Kiểu lắp đặt | Surface mount |
| Nhiệt độ hoạt động | 0 C to 85 C |
| Lead-Free Status | Lead-free |
Hướng dẫn cấu hình chân XC3S1500-4FGG676I 676 balls
Cấu hình chân cho XC3S1500-4FGG676I (676 balls gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC3S1500-4FGG676I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC3S1500-4FGG676I phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Communications Interface, Data Acquisition and Instrumentation, Video and Image Processing, Embedded Control System, Test and Measurement Equipment.
Industrial Automation Controller
The XC3S1500-4FGG676I fits industrial automation controllers that combine deterministic control logic with numerous field-bus and sensor interfaces. Its 29,952 logic cells provide capacity for state machines, sequence control, interlocks, counters, and communication protocol engines, while the 676-ball FBGA offers extensive I/O connectivity in a compact surface-mount package. The -4 grade is suitable for designs whose timing closure relies on the stated 630 MHz device capability. In implementation, the FPGA should operate behind an isolated or protected I/O structure, and its 1.2 V core rail must be distributed through a low-impedance plane with local decoupling. The main engineering tradeoff is that a mature Spartan-3 design may require more discrete interface circuitry than a newer mixed-signal microcontroller with integrated analog functions.
Được đề xuất
Communications Interface
The XC3S1500-4FGG676I is appropriate for communications equipment that must serialize, deserialize, frame, filter, or buffer data across multiple interfaces. The 29,952 logic cells can support parallel-to-serial conversion, CRC generation, packet classification, and protocol state machines, while dedicated block RAM is useful for fixed-latency buffering. A stated 630 MHz maximum frequency provides ample timing potential for common parallel interfaces when the design is properly constrained. The 676-BGA package provides enough pins for parallel data buses, reference clocks, control signals, and high-speed serial lanes. Designers should use the manufacturer’s I/O standards and package information to define voltage domains, then verify implementation timing at the selected -4 speed grade rather than treating the maximum frequency as a guaranteed system clock.
Được đề xuất
Data Acquisition and Instrumentation
The XC3S1500-4FGG676I can implement parallel data-acquisition, digital filtering, and timing-control logic in instrumentation systems. Its 29,952 logic cells are suitable for sample buffering, trigger sequencing, interpolation, and control of multiple converters, while block RAM can hold acquisition windows or coefficient data. The large 676-ball package also allows dedicated pins for converter data buses, clocks, triggers, status indicators, and communication links. For analog measurement systems, keep high-speed and sensitive traces away from switching nodes, use controlled-impedance routing for wide buses, and validate the FPGA timing at the -4 grade. The principal limitation is that external converters, amplifiers, and protection components can consume more board area than the FPGA itself, so analog layout and digital timing must be planned together.
Được đề xuất
Video and Image Processing
The XC3S1500-4FGG676I is well suited to parallel image-processing pipelines that perform filtering, thresholding, color conversion, pixel buffering, and format conversion. Its 29,952 logic cells and dedicated arithmetic resources can process multiple pixels in parallel, while on-chip block RAM supports line buffers and fixed-size frame regions. The 676-ball package provides the pin density needed for parallel sensor or video-interface connections and external memory. Achieving useful performance depends on memory bandwidth, registered I/O paths, and clock constraints; the stated 630 MHz figure applies at the device level and does not guarantee the same rate through every routing path. A practical design should use the manufacturer’s recommended clocking and I/O standards while verifying timing after placement and routing.
Được đề xuất
Embedded Control System
The XC3S1500-4FGG676I can serve as the programmable logic core of an embedded control system that requires deterministic timing, custom peripherals, and flexible I/O assignment. The 29,952 logic cells can implement custom bus bridges, motor-control sequencing, watchdog functions, timer structures, and hardware state machines without depending on a fixed processor architecture. The 676-ball package offers extensive connectivity for sensors, actuators, local memories, and external processors, while the 1.2 V core supply simplifies comparison with other FPGA families. The design must still include correct configuration startup behavior, clock generation, reset distribution, and power sequencing. Compared with a microcontroller, the FPGA offers more deterministic parallel hardware but requires external memory or firmware support for many general-purpose tasks, so system partitioning determines whether the device provides a practical advantage.
Được đề xuất
Test and Measurement Equipment
The XC3S1500-4FGG676I is useful in test and measurement equipment where pattern generation, timing control, data capture, and instrument interfacing require flexible parallel logic. Its 29,952 logic cells can implement sequencers, vector generators, protocol bridges, and real-time control, while dedicated block RAM supports captured waveforms or test vectors. The 676-BGA package can accommodate parallel instrument buses, clock outputs, synchronization inputs, and communication interfaces. Designers should separate sensitive measurement paths from FPGA power-distribution and switching activity, maintain controlled return paths, and validate board-level signal integrity across temperature. The key tradeoff is that Spartan-3 is a mature architecture with a fixed resource structure; a newer FPGA may offer more DSP, memory, or hard processor resources, but replacing it generally requires a complete pinout, timing, and firmware review.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC3S1500-4FGG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC3S1500-4FGG676C | XC3S1500-4FG676I | XC3S1500-5FGG676I | XC3S1500-5FGG676C | XC3S1500-2FGG676I |
|---|---|---|---|---|---|---|
| Package | 676-BGA | 676-BGA | 676-BGA | 676-BGA | 676-BGA | 676-BGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 |
| System Gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates |
| Logic Cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells |
| Performance Grade | -4 | -4 | -4 | -5 | -5 | -2 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
| Temperature Suffix | I | C | I | I | C | I |
Bảo phân biệt quan trọng
- Maintains the exact Spartan-3 resource level across close ordering alternatives (vsXC3S1500-4FGG676C)
- Higher performance grade option in the same 676-BGA family (vsXC3S1500-4FGG676I)
- Lower-speed option for timing-margin or sourcing scenarios (vsXC3S1500-4FGG676I)
- Same commercial-temperature ordering form for systems not requiring the I suffix (vsXC3S1500-4FGG676I)
Ghi chú thiết kế
Implement the 1.2 V core rail as a low-impedance distribution network and follow the manufacturer’s package-specific power-ball assignments. Place bulk capacitance near the supply entry point and high-frequency decoupling directly between each required power and ground ball group. Avoid splitting the core plane unnecessarily beneath the BGA, and keep switching-regulator loops and magnetics away from sensitive clock and data pins. Validate the design with power-plane resistance, via-current capacity, transient-response, and worst-case load calculations.
The 676-ball FBGA requires assembly and inspection processes capable of handling fine-pitch, solder-mask-defined lands. Match the PCB land pattern to the official 676-ball mechanical drawing rather than a generic Spartan-3 footprint. Preserve the package’s thermal and electrical land-function definitions, account for board coplanarity, and provide an appropriate underfill or solder-process strategy where required by the assembly method. Because exact package drawings were not included in the indexed documentation, verify all ball coordinates and solder-mask clearances against the manufacturer datasheet.
Define every I/O voltage domain and use the manufacturer’s supported I/O standards for clocks, data buses, and configuration pins. Route clocks as controlled-impedance nets with matched topology and minimize stubs on memory interfaces. For high-speed buses, include source-series termination where recommended, maintain continuous reference planes, and use via stitching to maintain return paths. Run post-layout timing and signal-integrity simulations because the 630 MHz figure is a device-level maximum rather than a guaranteed routed-clock result.
Estimate junction temperature from actual FPGA power, package thermal resistance, board copper, airflow, and the highest expected ambient temperature. The XC3S1500-4FGG676I has 29,952 logic cells, and utilization of block RAM, DSP resources, routing, and I/O can materially change dynamic power. Use worst-case post-implementation activity factors rather than assuming unloaded FPGA power. Provide thermal relief, copper spreading, and airflow paths appropriate to the enclosure, and verify the completed assembly at the highest ambient condition.
Do not treat XC3S1500, XC3S1500E, or other Spartan-3 family members as automatic replacements merely because their system-gate counts are similar. Confirm the exact die, package-ball count, speed grade, temperature suffix, pinout, supported I/O standards, configuration interface, and supply requirements. For the listed alternatives, verify that the package code really denotes the same 676-ball land pattern and review the manufacturer’s configuration and power-sequencing requirements before replacing an installed part.
Thông tin tuân thủ
The exact device is identified as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status were not explicitly established by the indexed device information.