XC4VFX40-11FFG672I - Virtex-4 FX FPGA, 41904 Logic Cells | AMD
MPN: XC4VFX40-11FFG672I ✗ Cuối đờiXC4VFX40-11FFG672I Tóm tắt
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the FPGA hierarchy, the Virtex-4 FX family combines general-purpose programmable logic with high-speed serial transceivers and selectable DSP resources. The XC4VFX40 is positioned for designs that require substantially more parallel processing capacity than a small microcontroller or CPLD while retaining deterministic hardware-level timing.
Key characteristics include a 4,656-CLB logic fabric, 41,904 logic cells, and 352 I/O. The -11 suffix identifies the device's performance grade within the Virtex-4 family, where -12 is the highest speed grade and -10 is the lowest. The FFG672 package designation identifies a 672-ball fine-pitch BGA construction, and a 27 mm by 27 mm body with 1.00 mm terminal pitch supports dense board-level integration.
The device uses CMOS technology and includes dedicated clocking, block RAM, and DSP capabilities for parallel data processing. Its internal clock figure is listed as 1,028 MHz, although achievable system clocking depends on the selected logic path, I/O standard, speed grade, device utilization, timing constraints, and power or temperature conditions.
Typical applications include telecommunications line cards, network interface controllers, industrial protocol bridges, video and image-processing pipelines, radar or signal-processing modules, and high-throughput embedded control. These designs benefit from parallel datapaths, abundant configurable logic, and deterministic hardware implementation rather than software-driven sequential execution.
PCB implementation requires careful power-plane segmentation, controlled-decoupling via via stitching, and pin-aware escape routing from the fine-pitch BGA. Because this is a high-pin-count device, use the AMD package pinout files and device-specific design guidance to assign every ball, power rail, configuration signal, and transceiver connection.
This page consolidates device specifications, package details, lifecycle considerations, comparison points, and practical implementation guidance into a single engineering reference for the XC4VFX40-11FFG672I.
Bộ thay thế dễ dàng lắp đặt cho XC4VFX40-11FFG672I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC4VFX40-11FFG672I (cùng hình factor và footprint) — khác nhau ở Logic Cells, Package Type, Device Type, Operating Temperature, Speed Grade.
XC4VFX40-11FFG672CS1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX40-11FF672I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VFX60-11FF672I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VFX40-12FFG672I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX40-10FFG672I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC4VFX40-11FFG672I Tỷ lệ tối đa & tính chất điện
| Device Type | Virtex-4 FX Field-Programmable Gate Array (FPGA) |
| Logic Cells | 41,904 logic cells |
| Configurable Logic Blocks | 4,656 CLBs |
| User I/O Count | 352 I/O |
| Logic Technology | CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| Internal Frequency | 1,028 MHz |
| Package Type | 672-ball FCBGA (FFG672) |
| Package Dimensions | 27 mm x 27 mm |
| Terminal Pitch | 1.00 mm |
| Nhiệt độ hoạt động | 0 C to 85 C |
| Moisture Sensitivity Level | MSL 4 (72 hours) |
| Peak Reflow Temperature Duration | 30 s maximum |
| Trạng thái RoHS | Compliant |
| Kiểu lắp đặt | Surface Mount |
Hướng dẫn cấu hình chân XC4VFX40-11FFG672I 27 mm x 27 mm
Cấu hình chân cho XC4VFX40-11FFG672I (27 mm x 27 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC4VFX40-11FFG672I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC4VFX40-11FFG672I phù hợp cho 6 Áp dụngs: Telecommunications Line Cards, Network Interface Controllers, DSP and Image-Processing Pipelines, Industrial Protocol and Data Acquisition, High-Speed Communications Adapters, Aerospace and Defense Control Logic.
Telecommunications Line Cards
The XC4VFX40-11FFG672I fits line-card and packet-processing designs that require deterministic parallel datapaths rather than a software-sequential processor. Its 41,904 logic cells and 4,656 CLBs allow multiple protocol engines, buffers, and control logic to operate concurrently, while 352 user I/O support backplane and network-facing connections. The Virtex-4 FX architecture also allows specialized serial and DSP resources to be incorporated into the same implementation. Timing closure should be based on post-route analysis because the listed 1,028 MHz internal frequency does not guarantee the same rate for every logic path.
Được đề xuất
Network Interface Controllers
The XC4VFX40-11FFG672I is appropriate for Ethernet, packet-buffer, and interface-conversion modules where multiple data paths must operate at line rate. Its 4,656 CLBs provide substantial parallel processing capacity, and the 352 I/O can support control logic, status signals, and high-speed parallel interfaces. Engineers can implement transmit, receive, lookup, and buffering functions in hardware to reduce processor loading. Power planning should separate high-activity switching logic from quieter control resources, while pin assignment must follow the AMD Virtex-4 package files for the exact FFG672 variant.
Được đề xuất
DSP and Image-Processing Pipelines
The XC4VFX40-11FFG672I supports parallel filtering, pixel transformation, and fixed-point signal-processing pipelines where sustained throughput is more important than sequential instruction execution. The 41,904 logic cells provide abundant capacity for control, address generation, and data movement around the Virtex-4 FX DSP resources. Multiplier mapping and clocking should be reviewed against the device resource configuration to avoid routing congestion. Because this is an older programmable-logic family, verify Vivado device support and the final bitstream configuration before committing to production tooling.
Được đề xuất
Industrial Protocol and Data Acquisition
The XC4VFX40-11FFG672I can serve as the central programmable controller in industrial acquisition and protocol-conversion equipment. Its 352 user I/O accommodate multiple sensor inputs, actuator outputs, status lines, and high-speed parallel channels, while the large CLB count allows concurrent sampling, buffering, and protocol translation. The 672-ball FCBGA requires careful escape-routing and via-stitching strategies to maintain signal and power integrity. Design partitioning should keep high-fanout clock and control routing predictable, and timing should be verified across the required industrial temperature range.
Được đề xuất
High-Speed Communications Adapters
The Virtex-4 FX architecture of the XC4VFX40-11FFG672I makes it suitable for communications adapters that combine parallel packet handling with dedicated serial links. The 41,904 logic cells can implement protocol layers, buffers, and test logic around the transceiver resources without relying on a separate ASIC. Board design should isolate high-speed serial return paths from sensitive control signals and use the manufacturer's recommended reference clock and power-filtering arrangements. Confirm the exact transceiver inventory and pin mapping in the device documentation before finalizing the adapter schematic.
Được đề xuất
Aerospace and Defense Control Logic
The XC4VFX40-11FFG672I can implement parallel control, acquisition, and telemetry logic in systems where deterministic hardware response and long-established tool flows are important. Its large logic fabric allows safety partitioning, redundant processing, and comprehensive built-in testing to be distributed across the device. The mature Virtex-4 family requires particular attention to lifecycle availability, documentation revision status, and software-tool compatibility. For regulated programs, obtain current qualification, radiation, and configuration-management documentation for the exact ordering code rather than relying on family-level information.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC4VFX40-11FFG672I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC4VFX40-11FFG672CS1 | XC4VFX40-11FF672I | XC4VFX60-11FF672I | XC4VFX40-12FFG672I | XC4VFX40-10FFG672I |
|---|---|---|---|---|---|---|
| Brand | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. |
| Package | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -11 | -11 | -11 | -11 | -12 | -10 |
Bảo phân biệt quan trọng
- Same-footprint speed-grade options preserve PCB layout while changing performance (vsXC4VFX40-12FFG672I)
- Direct ordering-code alternative documented alongside the target (vsXC4VFX40-11FF672I)
- Commercial-temperature catalog variant (vsXC4VFX40-11FFG672CS1)
- Additional family capacity in the same package footprint (vsXC4VFX60-11FF672I)
Ghi chú thiết kế
Treat the 1.2 V core and other supply groups as a multi-rail power system. Follow the AMD device power guidelines for plane partitioning, decoupling values, and regulator selection. Place bulk and high-frequency decoupling near the corresponding power balls and stitch planes to ground with dense vias; a 672-ball BGA makes small loop area a primary requirement for acceptable voltage integrity.
Use the AMD FFG672 package documentation to produce a complete escape-routing plan. Alternate signal layers may be needed for the 1.00 mm pitch ball array, and BGA-via-in-pad or via-stitching structures should be evaluated against assembly cost and inspection access. Confirm each ball's supply, ground, configuration, clock, and user-I/O function before releasing the layout.
Estimate worst-case junction temperature from the final power map rather than nominal logic activity alone. Virtex-4 FX power can vary with logic utilization, clocking, RAM, DSP, and I/O activity, so use device power tools for the selected design. Preserve uninterrupted thermal paths into the board stack-up and avoid placing the BGA directly above a high-resistance thermal void.
Keep configuration, clock, and dedicated transceiver reference routing free of aggressive switching-current paths. Follow the manufacturer guidance for reference-clock routing and decoupling, maintain the specified return-path continuity, and isolate noisy logic from sensitive clock networks. Avoid routing user I/O directly beneath the device when the board stack-up provides a better escape solution.
Do not treat the listed 1,028 MHz internal frequency as a guaranteed clock target. Timing results depend on logic depth, placement, routing congestion, device speed grade, voltage, and temperature. Validate the post-route design, review timing exceptions carefully, and confirm that the exact bitstream targets XC4VFX40-11FFG672I rather than a related speed grade or ordering code.
Thông tin tuân thủ
RoHS compliance is listed in the LCSC component datasheet entry. Other declarations require current manufacturer documentation for the exact ordering code.