XC4VFX40-11FFG672I - Virtex-4 FX FPGA, 41904 Logic Cells | AMD
MPN: XC4VFX40-11FFG672I ✗ Akhir HayatXC4VFX40-11FFG672I Ringkasan
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the FPGA hierarchy, the Virtex-4 FX family combines general-purpose programmable logic with high-speed serial transceivers and selectable DSP resources. The XC4VFX40 is positioned for designs that require substantially more parallel processing capacity than a small microcontroller or CPLD while retaining deterministic hardware-level timing.
Key characteristics include a 4,656-CLB logic fabric, 41,904 logic cells, and 352 I/O. The -11 suffix identifies the device's performance grade within the Virtex-4 family, where -12 is the highest speed grade and -10 is the lowest. The FFG672 package designation identifies a 672-ball fine-pitch BGA construction, and a 27 mm by 27 mm body with 1.00 mm terminal pitch supports dense board-level integration.
The device uses CMOS technology and includes dedicated clocking, block RAM, and DSP capabilities for parallel data processing. Its internal clock figure is listed as 1,028 MHz, although achievable system clocking depends on the selected logic path, I/O standard, speed grade, device utilization, timing constraints, and power or temperature conditions.
Typical applications include telecommunications line cards, network interface controllers, industrial protocol bridges, video and image-processing pipelines, radar or signal-processing modules, and high-throughput embedded control. These designs benefit from parallel datapaths, abundant configurable logic, and deterministic hardware implementation rather than software-driven sequential execution.
PCB implementation requires careful power-plane segmentation, controlled-decoupling via via stitching, and pin-aware escape routing from the fine-pitch BGA. Because this is a high-pin-count device, use the AMD package pinout files and device-specific design guidance to assign every ball, power rail, configuration signal, and transceiver connection.
This page consolidates device specifications, package details, lifecycle considerations, comparison points, and practical implementation guidance into a single engineering reference for the XC4VFX40-11FFG672I.
Pilihan pengganti yang segera untuk XC4VFX40-11FFG672I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC4VFX40-11FFG672I (sama faktor bentuk dan kaki) — berbeza dalam Logic Cells, Package Type, Device Type, Operating Temperature, Speed Grade.
XC4VFX40-11FFG672CS1
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX40-11FF672I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC4VFX60-11FF672I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC4VFX40-12FFG672I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX40-10FFG672I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC4VFX40-11FFG672I Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Virtex-4 FX Field-Programmable Gate Array (FPGA) |
| Logic Cells | 41,904 logic cells |
| Configurable Logic Blocks | 4,656 CLBs |
| User I/O Count | 352 I/O |
| Logic Technology | CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| Internal Frequency | 1,028 MHz |
| Package Type | 672-ball FCBGA (FFG672) |
| Package Dimensions | 27 mm x 27 mm |
| Terminal Pitch | 1.00 mm |
| Suhu Operasi | 0 C to 85 C |
| Moisture Sensitivity Level | MSL 4 (72 hours) |
| Peak Reflow Temperature Duration | 30 s maximum |
| Status RoHS | Compliant |
| Jenis Pemasangan | Surface Mount |
Panduan Konfigurasi Pin XC4VFX40-11FFG672I 27 mm x 27 mm
Konfigurasi pin untuk XC4VFX40-11FFG672I (27 mm x 27 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC4VFX40-11FFG672I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC4VFX40-11FFG672I patut untuk 6 aplikasis: Telecommunications Line Cards, Network Interface Controllers, DSP and Image-Processing Pipelines, Industrial Protocol and Data Acquisition, High-Speed Communications Adapters, Aerospace and Defense Control Logic.
Telecommunications Line Cards
The XC4VFX40-11FFG672I fits line-card and packet-processing designs that require deterministic parallel datapaths rather than a software-sequential processor. Its 41,904 logic cells and 4,656 CLBs allow multiple protocol engines, buffers, and control logic to operate concurrently, while 352 user I/O support backplane and network-facing connections. The Virtex-4 FX architecture also allows specialized serial and DSP resources to be incorporated into the same implementation. Timing closure should be based on post-route analysis because the listed 1,028 MHz internal frequency does not guarantee the same rate for every logic path.
Disebarkan
Network Interface Controllers
The XC4VFX40-11FFG672I is appropriate for Ethernet, packet-buffer, and interface-conversion modules where multiple data paths must operate at line rate. Its 4,656 CLBs provide substantial parallel processing capacity, and the 352 I/O can support control logic, status signals, and high-speed parallel interfaces. Engineers can implement transmit, receive, lookup, and buffering functions in hardware to reduce processor loading. Power planning should separate high-activity switching logic from quieter control resources, while pin assignment must follow the AMD Virtex-4 package files for the exact FFG672 variant.
Disebarkan
DSP and Image-Processing Pipelines
The XC4VFX40-11FFG672I supports parallel filtering, pixel transformation, and fixed-point signal-processing pipelines where sustained throughput is more important than sequential instruction execution. The 41,904 logic cells provide abundant capacity for control, address generation, and data movement around the Virtex-4 FX DSP resources. Multiplier mapping and clocking should be reviewed against the device resource configuration to avoid routing congestion. Because this is an older programmable-logic family, verify Vivado device support and the final bitstream configuration before committing to production tooling.
Disebarkan
Industrial Protocol and Data Acquisition
The XC4VFX40-11FFG672I can serve as the central programmable controller in industrial acquisition and protocol-conversion equipment. Its 352 user I/O accommodate multiple sensor inputs, actuator outputs, status lines, and high-speed parallel channels, while the large CLB count allows concurrent sampling, buffering, and protocol translation. The 672-ball FCBGA requires careful escape-routing and via-stitching strategies to maintain signal and power integrity. Design partitioning should keep high-fanout clock and control routing predictable, and timing should be verified across the required industrial temperature range.
Disebarkan
High-Speed Communications Adapters
The Virtex-4 FX architecture of the XC4VFX40-11FFG672I makes it suitable for communications adapters that combine parallel packet handling with dedicated serial links. The 41,904 logic cells can implement protocol layers, buffers, and test logic around the transceiver resources without relying on a separate ASIC. Board design should isolate high-speed serial return paths from sensitive control signals and use the manufacturer's recommended reference clock and power-filtering arrangements. Confirm the exact transceiver inventory and pin mapping in the device documentation before finalizing the adapter schematic.
Disebarkan
Aerospace and Defense Control Logic
The XC4VFX40-11FFG672I can implement parallel control, acquisition, and telemetry logic in systems where deterministic hardware response and long-established tool flows are important. Its large logic fabric allows safety partitioning, redundant processing, and comprehensive built-in testing to be distributed across the device. The mature Virtex-4 family requires particular attention to lifecycle availability, documentation revision status, and software-tool compatibility. For regulated programs, obtain current qualification, radiation, and configuration-management documentation for the exact ordering code rather than relying on family-level information.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC4VFX40-11FFG672I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC4VFX40-11FFG672CS1 | XC4VFX40-11FF672I | XC4VFX60-11FF672I | XC4VFX40-12FFG672I | XC4VFX40-10FFG672I |
|---|---|---|---|---|---|---|
| Brand | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. |
| Package | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -11 | -11 | -11 | -11 | -12 | -10 |
Penyeberangsung Jelas
- Same-footprint speed-grade options preserve PCB layout while changing performance (vsXC4VFX40-12FFG672I)
- Direct ordering-code alternative documented alongside the target (vsXC4VFX40-11FF672I)
- Commercial-temperature catalog variant (vsXC4VFX40-11FFG672CS1)
- Additional family capacity in the same package footprint (vsXC4VFX60-11FF672I)
Catatan Desain
Treat the 1.2 V core and other supply groups as a multi-rail power system. Follow the AMD device power guidelines for plane partitioning, decoupling values, and regulator selection. Place bulk and high-frequency decoupling near the corresponding power balls and stitch planes to ground with dense vias; a 672-ball BGA makes small loop area a primary requirement for acceptable voltage integrity.
Use the AMD FFG672 package documentation to produce a complete escape-routing plan. Alternate signal layers may be needed for the 1.00 mm pitch ball array, and BGA-via-in-pad or via-stitching structures should be evaluated against assembly cost and inspection access. Confirm each ball's supply, ground, configuration, clock, and user-I/O function before releasing the layout.
Estimate worst-case junction temperature from the final power map rather than nominal logic activity alone. Virtex-4 FX power can vary with logic utilization, clocking, RAM, DSP, and I/O activity, so use device power tools for the selected design. Preserve uninterrupted thermal paths into the board stack-up and avoid placing the BGA directly above a high-resistance thermal void.
Keep configuration, clock, and dedicated transceiver reference routing free of aggressive switching-current paths. Follow the manufacturer guidance for reference-clock routing and decoupling, maintain the specified return-path continuity, and isolate noisy logic from sensitive clock networks. Avoid routing user I/O directly beneath the device when the board stack-up provides a better escape solution.
Do not treat the listed 1,028 MHz internal frequency as a guaranteed clock target. Timing results depend on logic depth, placement, routing congestion, device speed grade, voltage, and temperature. Validate the post-route design, review timing exceptions carefully, and confirm that the exact bitstream targets XC4VFX40-11FFG672I rather than a related speed grade or ordering code.
Maklumat Kesediaan
RoHS compliance is listed in the LCSC component datasheet entry. Other declarations require current manufacturer documentation for the exact ordering code.