XC4VFX40-11FFG672I - Virtex-4 FX FPGA, 41904 Logic Cells | AMD
MPN: XC4VFX40-11FFG672I ✗ 停產XC4VFX40-11FFG672I 概覽
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the FPGA hierarchy, the Virtex-4 FX family combines general-purpose programmable logic with high-speed serial transceivers and selectable DSP resources. The XC4VFX40 is positioned for designs that require substantially more parallel processing capacity than a small microcontroller or CPLD while retaining deterministic hardware-level timing.
Key characteristics include a 4,656-CLB logic fabric, 41,904 logic cells, and 352 I/O. The -11 suffix identifies the device's performance grade within the Virtex-4 family, where -12 is the highest speed grade and -10 is the lowest. The FFG672 package designation identifies a 672-ball fine-pitch BGA construction, and a 27 mm by 27 mm body with 1.00 mm terminal pitch supports dense board-level integration.
The device uses CMOS technology and includes dedicated clocking, block RAM, and DSP capabilities for parallel data processing. Its internal clock figure is listed as 1,028 MHz, although achievable system clocking depends on the selected logic path, I/O standard, speed grade, device utilization, timing constraints, and power or temperature conditions.
Typical applications include telecommunications line cards, network interface controllers, industrial protocol bridges, video and image-processing pipelines, radar or signal-processing modules, and high-throughput embedded control. These designs benefit from parallel datapaths, abundant configurable logic, and deterministic hardware implementation rather than software-driven sequential execution.
PCB implementation requires careful power-plane segmentation, controlled-decoupling via via stitching, and pin-aware escape routing from the fine-pitch BGA. Because this is a high-pin-count device, use the AMD package pinout files and device-specific design guidance to assign every ball, power rail, configuration signal, and transceiver connection.
This page consolidates device specifications, package details, lifecycle considerations, comparison points, and practical implementation guidance into a single engineering reference for the XC4VFX40-11FFG672I.
直接替換替代品,適用於 XC4VFX40-11FFG672I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC4VFX40-11FFG672I (相同外形與佔位) — 差異在於 Logic Cells, Package Type, Device Type, Operating Temperature, Speed Grade.
XC4VFX40-11FFG672CS1
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX40-11FF672I
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX60-11FF672I
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX40-12FFG672I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC4VFX40-10FFG672I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC4VFX40-11FFG672I 最大額定值與電氣特性
| Device Type | Virtex-4 FX Field-Programmable Gate Array (FPGA) |
| Logic Cells | 41,904 logic cells |
| Configurable Logic Blocks | 4,656 CLBs |
| User I/O Count | 352 I/O |
| Logic Technology | CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| Internal Frequency | 1,028 MHz |
| Package Type | 672-ball FCBGA (FFG672) |
| Package Dimensions | 27 mm x 27 mm |
| Terminal Pitch | 1.00 mm |
| 工作溫度 | 0 C to 85 C |
| Moisture Sensitivity Level | MSL 4 (72 hours) |
| Peak Reflow Temperature Duration | 30 s maximum |
| RoHS 狀態 | Compliant |
| 安裝類型 | Surface Mount |
XC4VFX40-11FFG672I 27 mm x 27 mm 腳位配置指南
XC4VFX40-11FFG672I(27 mm x 27 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC4VFX40-11FFG672I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC4VFX40-11FFG672I 適用於 6 應用s: Telecommunications Line Cards, Network Interface Controllers, DSP and Image-Processing Pipelines, Industrial Protocol and Data Acquisition, High-Speed Communications Adapters, Aerospace and Defense Control Logic.
Telecommunications Line Cards
The XC4VFX40-11FFG672I fits line-card and packet-processing designs that require deterministic parallel datapaths rather than a software-sequential processor. Its 41,904 logic cells and 4,656 CLBs allow multiple protocol engines, buffers, and control logic to operate concurrently, while 352 user I/O support backplane and network-facing connections. The Virtex-4 FX architecture also allows specialized serial and DSP resources to be incorporated into the same implementation. Timing closure should be based on post-route analysis because the listed 1,028 MHz internal frequency does not guarantee the same rate for every logic path.
推薦
Network Interface Controllers
The XC4VFX40-11FFG672I is appropriate for Ethernet, packet-buffer, and interface-conversion modules where multiple data paths must operate at line rate. Its 4,656 CLBs provide substantial parallel processing capacity, and the 352 I/O can support control logic, status signals, and high-speed parallel interfaces. Engineers can implement transmit, receive, lookup, and buffering functions in hardware to reduce processor loading. Power planning should separate high-activity switching logic from quieter control resources, while pin assignment must follow the AMD Virtex-4 package files for the exact FFG672 variant.
推薦
DSP and Image-Processing Pipelines
The XC4VFX40-11FFG672I supports parallel filtering, pixel transformation, and fixed-point signal-processing pipelines where sustained throughput is more important than sequential instruction execution. The 41,904 logic cells provide abundant capacity for control, address generation, and data movement around the Virtex-4 FX DSP resources. Multiplier mapping and clocking should be reviewed against the device resource configuration to avoid routing congestion. Because this is an older programmable-logic family, verify Vivado device support and the final bitstream configuration before committing to production tooling.
推薦
Industrial Protocol and Data Acquisition
The XC4VFX40-11FFG672I can serve as the central programmable controller in industrial acquisition and protocol-conversion equipment. Its 352 user I/O accommodate multiple sensor inputs, actuator outputs, status lines, and high-speed parallel channels, while the large CLB count allows concurrent sampling, buffering, and protocol translation. The 672-ball FCBGA requires careful escape-routing and via-stitching strategies to maintain signal and power integrity. Design partitioning should keep high-fanout clock and control routing predictable, and timing should be verified across the required industrial temperature range.
推薦
High-Speed Communications Adapters
The Virtex-4 FX architecture of the XC4VFX40-11FFG672I makes it suitable for communications adapters that combine parallel packet handling with dedicated serial links. The 41,904 logic cells can implement protocol layers, buffers, and test logic around the transceiver resources without relying on a separate ASIC. Board design should isolate high-speed serial return paths from sensitive control signals and use the manufacturer's recommended reference clock and power-filtering arrangements. Confirm the exact transceiver inventory and pin mapping in the device documentation before finalizing the adapter schematic.
推薦
Aerospace and Defense Control Logic
The XC4VFX40-11FFG672I can implement parallel control, acquisition, and telemetry logic in systems where deterministic hardware response and long-established tool flows are important. Its large logic fabric allows safety partitioning, redundant processing, and comprehensive built-in testing to be distributed across the device. The mature Virtex-4 family requires particular attention to lifecycle availability, documentation revision status, and software-tool compatibility. For regulated programs, obtain current qualification, radiation, and configuration-management documentation for the exact ordering code rather than relying on family-level information.
推薦
推薦產品摘要
工程參考資料,適用於 XC4VFX40-11FFG672I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC4VFX40-11FFG672CS1 | XC4VFX40-11FF672I | XC4VFX60-11FF672I | XC4VFX40-12FFG672I | XC4VFX40-10FFG672I |
|---|---|---|---|---|---|---|
| Brand | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. |
| Package | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) | 672-ball FCBGA (FFG672) |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -11 | -11 | -11 | -11 | -12 | -10 |
主要差異化特點
- Same-footprint speed-grade options preserve PCB layout while changing performance (對比XC4VFX40-12FFG672I)
- Direct ordering-code alternative documented alongside the target (對比XC4VFX40-11FF672I)
- Commercial-temperature catalog variant (對比XC4VFX40-11FFG672CS1)
- Additional family capacity in the same package footprint (對比XC4VFX60-11FF672I)
設計說明
Treat the 1.2 V core and other supply groups as a multi-rail power system. Follow the AMD device power guidelines for plane partitioning, decoupling values, and regulator selection. Place bulk and high-frequency decoupling near the corresponding power balls and stitch planes to ground with dense vias; a 672-ball BGA makes small loop area a primary requirement for acceptable voltage integrity.
Use the AMD FFG672 package documentation to produce a complete escape-routing plan. Alternate signal layers may be needed for the 1.00 mm pitch ball array, and BGA-via-in-pad or via-stitching structures should be evaluated against assembly cost and inspection access. Confirm each ball's supply, ground, configuration, clock, and user-I/O function before releasing the layout.
Estimate worst-case junction temperature from the final power map rather than nominal logic activity alone. Virtex-4 FX power can vary with logic utilization, clocking, RAM, DSP, and I/O activity, so use device power tools for the selected design. Preserve uninterrupted thermal paths into the board stack-up and avoid placing the BGA directly above a high-resistance thermal void.
Keep configuration, clock, and dedicated transceiver reference routing free of aggressive switching-current paths. Follow the manufacturer guidance for reference-clock routing and decoupling, maintain the specified return-path continuity, and isolate noisy logic from sensitive clock networks. Avoid routing user I/O directly beneath the device when the board stack-up provides a better escape solution.
Do not treat the listed 1,028 MHz internal frequency as a guaranteed clock target. Timing results depend on logic depth, placement, routing congestion, device speed grade, voltage, and temperature. Validate the post-route design, review timing exceptions carefully, and confirm that the exact bitstream targets XC4VFX40-11FFG672I rather than a related speed grade or ordering code.
合規資訊
RoHS compliance is listed in the LCSC component datasheet entry. Other declarations require current manufacturer documentation for the exact ordering code.