XC6SLX45-L1FGG676I - 43,661 Logic Cell Spartan-6 LX FPGA | AMD
MPN: XC6SLX45-L1FGG676I ✓ Hoạt độngXC6SLX45-L1FGG676I Tóm tắt
A field-programmable gate array is a semiconductor whose digital logic and I/O behavior are configured after fabrication. Within the product hierarchy, an FPGA is a programmable-logic device that can contain logic cells, block RAM, programmable I/O, and dedicated clock and routing resources. The Spartan-6 LX family occupies the general-purpose programmable-logic segment between small fixed logic devices and larger application-specific FPGA families.
The XC6SLX45-L1FGG676I provides 6,822 adaptive logic modules, 2.04 Mbit of embedded memory, 358 I/O, and an operating supply voltage listed as 1.2 V. Its industrial temperature range extends from -40 °C to +100 °C. The large 676-ball package supports dense board routing and is intended for designs requiring substantially more I/O than smaller Spartan-6 packages can offer.
Spartan-6 LX devices use configurable logic, block RAM, digital clock management, and programmable I/O resources to support parallel buses, embedded control logic, data acquisition, industrial automation, communications, and general-purpose accelerator designs. Because the FPGA configuration defines the implemented circuit, the same physical device can be reused across different products by changing the bitstream, provided the timing, I/O standards, and resource requirements are satisfied.
Typical uses include industrial controllers, data-acquisition systems, embedded vision, instrument control, communications gateways, and sensor-processing platforms. The 358-I/O count is particularly useful for systems combining multiple buses, parallel sensor interfaces, external memory, status indicators, and high-speed digital links. The low-power L1 speed option can also help reduce switching-related power demand where the design does not require the maximum performance of faster speed grades.
PCB implementation must follow the AMD Spartan-6 package pinout and power-decoupling guidance. The 676-ball BGA requires careful escape routing, adequate power and ground planes, via-in-pad or via-beneath-array construction where appropriate, and assembly process controls for solder joint reliability. Configuration storage, startup behavior, clocking, and I/O voltage selection should be verified against the device constraints before schematic release.
This product record combines the device architecture, package and resource details, pin-compatible family options, application guidance, and a parameter-by-parameter comparison. These engineering-focused references help designers assess whether the Spartan-6 LX L1 device, its temperature grade, and its 676-ball footprint match a new design without overlooking migration or assembly constraints.
Bộ thay thế dễ dàng lắp đặt cho XC6SLX45-L1FGG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC6SLX45-L1FGG676I (cùng hình factor và footprint) — khác nhau ở Process Technology, Package, Speed Grade, Logic Cells, Device Type.
XC6SLX45-2FGG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC6SLX45-3FGG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC6SLX45-2FGG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC6SLX45-L1FGG676C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC6SLX45-L1FGG676E
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC6SLX45-L1FGG676I Tỷ lệ tối đa & tính chất điện
| Device Type | Spartan-6 LX Field-Programmable Gate Array (FPGA) |
| Logic Cells | 43,661 cells |
| Adaptive Logic Modules | 6,822 ALMs |
| Embedded Memory | 2.04 Mbit |
| User I/O | 358 I/O |
| Internal Frequency | 500 MHz |
| Điện áp cung cấp hoạt động | 1.2 V |
| Process Technology | 45 nm |
| Hộp | 676-ball FBGA, 15 mm × 15 mm, 0.80 mm pitch |
| Terminal Count | 676 terminals |
| Kiểu lắp đặt | Surface-mount SMD/SMT |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +100 °C |
| Temperature Grade | Industrial |
| Speed Grade | L1 low-power grade |
| Lead-Free Status | Lead-free |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân XC6SLX45-L1FGG676I 676-ball fbga, 15 mm × 15 mm, 0.80 mm pitch
Cấu hình chân cho XC6SLX45-L1FGG676I (676-ball fbga, 15 mm × 15 mm, 0.80 mm pitch gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC6SLX45-L1FGG676I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC6SLX45-L1FGG676I phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Parallel Data-Acquisition System, Industrial Communications Gateway, Test and Measurement Instrument, Embedded Sensor Processing Platform, Embedded Vision and Control.
Industrial Automation Controller
The XC6SLX45-L1FGG676I fits industrial automation controllers that combine deterministic control logic with a substantial number of external signals. Its 43,661 logic cells and 6,822 adaptive logic modules can host sequencing, state-machine, communications, and safety-interlock functions, while 358 I/O provide access to sensors, actuators, encoders, and operator interfaces. The 1.2 V operating supply and L1 low-power speed option are useful in continuously energized equipment where switching activity and thermal load matter. In the controller, the FPGA can implement parallel machine-control logic and protocol conversion while the industrial temperature rating supports operation from -40 °C to +100 °C.
Được đề xuất
Parallel Data-Acquisition System
The XC6SLX45-L1FGG676I is suitable for parallel data-acquisition systems requiring numerous sensor inputs, local buffering, and digital signal conditioning. The 358 user I/O can accommodate grouped acquisition channels and control signals, while 2.04 Mbit of embedded memory can buffer parallel samples or support multiple data pipelines. Designers can implement channel timing, filtering, gain correction, and packet preparation inside the programmable fabric. The L1 grade emphasizes lower power relative to faster speed options, although the achievable sample rate must be validated against external memory timing and the selected I/O standards.
Được đề xuất
Industrial Communications Gateway
The XC6SLX45-L1FGG676I can serve as the programmable control core of an industrial communications gateway that must bridge multiple fieldbus or serial-interface formats. Its 43,661 logic cells allow protocol engines, FIFOs, routing tables, supervisory logic, and diagnostic functions to coexist in one device, while the 358-I/O capacity simplifies implementation of multiple board-level interfaces. The large 676-ball FBGA supports dense routing among logic, memory, clock, and I/O resources. The low-power L1 option is attractive for continuously operating gateways when timing margins permit, with security, update, and recovery logic configured in the FPGA bitstream.
Được đề xuất
Test and Measurement Instrument
The XC6SLX45-L1FGG676I is appropriate for programmable test and measurement instruments that require parallel control, acquisition, pattern generation, and analysis functions. Its 43,661 logic cells can implement digital test sequences, instrument-control state machines, and real-time processing, while 2.04 Mbit of embedded memory provides on-chip storage for samples and control structures. The 358 I/O provides practical access to wide buses and test fixtures. In a laboratory instrument, the FPGA can consolidate several fixed-function blocks into one configurable platform, allowing new measurement modes to be introduced through bitstream updates rather than hardware redesign.
Được đề xuất
Embedded Sensor Processing Platform
The XC6SLX45-L1FGG676I fits embedded sensor-processing platforms that combine many sensor inputs with local filtering, event detection, and data preparation. The FPGA's 358 I/O can connect sensor arrays, digital transducers, clocks, and communication links, while its programmable logic can execute parallel filtering and thresholding. The 2.04 Mbit embedded memory allows short acquisition windows and FIFO structures to be placed close to the processing logic. For IoT and smart-equipment designs, the L1 speed option can help control power consumption, while the industrial temperature range supports operation across demanding factory environments.
Được đề xuất
Embedded Vision and Control
The XC6SLX45-L1FGG676I can support embedded vision and machine-control subsystems that require parallel sensor ingestion, logic-assisted processing, and coordinated actuator outputs. Its programmable fabric allows timing-critical stages to be implemented as deterministic pipelines rather than relying entirely on a sequential processor. The 358 I/O provide connectivity for image or position sensors, synchronization signals, and control outputs, and the 2.04 Mbit embedded memory can support line buffers or intermediate data storage. The 676-ball package offers extensive routing capacity, although final image throughput must be checked against memory bandwidth, external interface timing, and the selected L1 performance limits.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC6SLX45-L1FGG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC6SLX45-2FGG676I | XC6SLX45-3FGG676I | XC6SLX45-2FGG676C | XC6SLX45-L1FGG676C | XC6SLX45-L1FGG676E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA |
| Device Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 43,661 cells | 43,661 cells | 43,661 cells | 43,661 cells | 43,661 cells | 43,661 cells |
| Adaptive Logic Modules | 6,822 ALMs | 6,822 ALMs | 6,822 ALMs | 6,822 ALMs | 6,822 ALMs | 6,822 ALMs |
| Embedded Memory | 2.04 Mbit | 2.04 Mbit | 2.04 Mbit | 2.04 Mbit | 2.04 Mbit | 2.04 Mbit |
| User I/O | 358 I/O | 358 I/O | 358 I/O | 358 I/O | 358 I/O | 358 I/O |
| Speed Grade | L1 low-power grade | -2 grade | -3 grade | -2 grade | L1 low-power grade | L1 low-power grade |
| Operating Temperature | -40 °C to +100 °C | -40 °C to +100 °C | -40 °C to +100 °C | Commercial temperature range | Commercial temperature range | Extended temperature range |
Bảo phân biệt quan trọng
- Low-power L1 speed option (vsXC6SLX45-2FGG676I)
- Industrial temperature coverage (vsXC6SLX45-2FGG676C)
- Substantial parallel I/O capacity (vsXC6SLX45-3FGG676I)
Ghi chú thiết kế
The 676-ball FBGA requires a constrained-routing strategy and an assembly process qualified for a 0.80 mm ball pitch. Place decoupling structures close to the device power balls, maintain continuous ground-reference planes, and follow the AMD Spartan-6 package footprint and via requirements exactly. A PCB stackup change alters escape-routing capacity and soldering behavior, so validate the final board stackup with the fabricator rather than treating the package drawing as a complete layout rule set.
Design the 1.2 V core rail with separate filtering paths for the FPGA and other board loads, and account for startup current as well as steady-state activity-dependent consumption. Use the family's recommended power decoupling and sequencing arrangement, and verify the regulator's transient response against the device's specified current profile. Power estimation should use the actual logic, block RAM, I/O, clock, and toggle rates; using only the L1 label does not establish a fixed consumption value.
Do not treat a shared FGG676 footprint as sufficient proof of drop-in operation. A migration changes speed-grade timing behavior, and temperature suffixes can change the acceptable operating range. Before replacing the L1 device, compare the official package pin files, confirm configuration compatibility, rerun static timing analysis, and verify industrial-temperature requirements. For prototypes, also inspect every BGA row and column against the assembly drawing to avoid a board-level orientation or footprint error.
Keep clock, configuration, and high-speed I/O routing predictable by following the AMD clocking and I/O guidance. Provide clean reference planes, avoid routing sensitive signals beneath noisy or switching power paths, and match external memory and transceiver interfaces with appropriate length and impedance rules. The 358-I/O device can create dense simultaneous-switching activity, so edge-rate and return-current planning should be completed before finalizing signal integrity validation limits.
Thông tin tuân thủ
The exact MPN listing identifies the package as lead-free and RoHS compliant. REACH, halogen-free, and conflict-minerals status are unknown.