XC7A50T-L1CSG324I - 52,160-Cell Artix-7 FPGA | AMD Xilinx
MPN: XC7A50T-L1CSG324I ✓ Hoạt độngXC7A50T-L1CSG324I Tóm tắt
A field-programmable gate array is a semiconductor whose digital logic, memory, signal processing, and I/O behavior are configured after manufacture. Within the product hierarchy, the XC7A50T belongs to the Artix-7 FPGA family, combines programmable logic with fixed resources such as block RAM and DSP blocks, and is intended for compact systems requiring moderate logic density, substantial parallel processing, and flexible interface support.
The principal device characteristics include 52,160 logic cells, 210 configurable I/O, 120 DSP slices, and 2,700 Kb of block RAM. Its 28 nm process technology supports the 7-series family's combination of high I/O bandwidth and low power consumption. The L1 speed designation and CSG324 package identify a particular performance and mechanical configuration, while the I suffix denotes the industrial-temperature ordering option.
The XC7A50T architecture provides dedicated arithmetic resources for DSP-intensive algorithms, distributed and block memory for data storage, clock-management resources including PLL and MMCM functions, and programmable I/O for external interfaces. These resources allow parallel datapaths to operate concurrently, making the FPGA suitable when deterministic hardware parallelism is more valuable than a sequential processor approach.
Typical uses include industrial automation, robotics, embedded control, communications, instrumentation, video processing, and compact edge-computing systems. A 210-I/O device can connect multiple external buses, capture channels, display interfaces, and control signals, while the 120 DSP slices accelerate filters, transforms, and fixed-point signal-processing workloads.
Designers should treat the FPGA as a multi-rail, high-pin-count device requiring a carefully planned PCB stack-up, controlled power sequencing, complete decoupling, and signal-integrity analysis for high-speed interfaces. The exact pin assignments, bank power requirements, configuration method, and supported I/O standards should be selected from the package pinout and Artix-7 documentation for the intended board revision.
This product record combines the exact device identity, package and resource details with practical comparison and replacement guidance. It highlights where speed-grade and temperature-grade changes affect substitution, while preserving the requirement for a true 324-pin CSBGA footprint rather than a merely similar FPGA.
Bộ thay thế dễ dàng lắp đặt cho XC7A50T-L1CSG324I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7A50T-L1CSG324I (cùng hình factor và footprint) — khác nhau ở DSP Slices, Package, Block RAM, Logic Cells, Mounting Type.
XC7A50T-1CSG324I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7A50T-2CSG324I
✅ Drop-In✓ Còn hàng
$25.4545 / Đơn vị
Xem tài liệu →XC7A50T-1CSG324C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7A50T-2CSG324C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7A50T-1CSG324E
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7A50T-L1CSG324I Tỷ lệ tối đa & tính chất điện
| FPGA Family | Artix-7 |
| Logic Cells | 52,160 cells |
| Programmable I/O | 210 I/O |
| Block RAM | 2,700 Kb |
| DSP Slices | 120 slices |
| Process Technology | 28 nm HPL HKMG |
| Core Supply Voltage | 0.95 V nominal |
| Core Supply Voltage Range | 0.92 V to 0.98 V |
| Hộp | 324-pin CSBGA, 18 mm x 18 mm |
| Device Type | Field-programmable gate array |
| Temperature Range | -40 °C to +100 °C |
| Temperature Grade | Industrial |
| I/O Bandwidth | 2.9 Tb/s |
| DSP Throughput | 5.3 TMAC/s |
| Clock Management | PLL and MMCM |
| Kiểu lắp đặt | Surface-mount BGA |
Hướng dẫn cấu hình chân XC7A50T-L1CSG324I 324-pin csbga, 18 mm x 18 mm
Cấu hình chân cho XC7A50T-L1CSG324I (324-pin csbga, 18 mm x 18 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7A50T-L1CSG324I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7A50T-L1CSG324I phù hợp cho 6 Áp dụngs: Industrial Automation and PLC Control, Robotics Control and Sensor Fusion, Communications and Protocol Bridging, Video and Image Processing, Test and Measurement Instrumentation, Embedded Edge Computing.
Industrial Automation and PLC Control
The XC7A50T-L1CSG324I fits machine-control systems that combine deterministic logic, sensor acquisition, and communication interfaces. Its 52,160 logic cells support state machines, interlocks, motion sequencing, and protocol handling, while 210 I/O provide substantial connectivity for encoders, limit switches, actuators, and field buses. The industrial -40 °C to +100 °C range suits factory equipment. Use the CSG324 ball map and bank constraints to assign external interfaces, and validate timing with the selected 0.92 V to 0.98 V core-supply range.
Được đề xuất
Robotics Control and Sensor Fusion
The XC7A50T-L1CSG324I is useful in robotic controllers that must process multiple sensor streams and issue precise motion commands in parallel. Its 120 DSP slices can accelerate filtering and fixed-point transforms, while the 52,160 logic cells support trajectory generation, state estimation, safety interlocks, and communication protocols. The 210-I/O interface count allows simultaneous connection of encoders, force sensors, motor drivers, and industrial links. Its industrial temperature range supports mobile or factory robotic platforms where board-level thermal design remains critical.
Được đề xuất
Communications and Protocol Bridging
The XC7A50T-L1CSG324I can serve as a configurable communications gateway or protocol bridge when several serial or parallel interfaces must be handled concurrently. Its 210 I/O and 2.9 Tb/s family-level I/O bandwidth provide resources for high-speed interfaces, while programmable logic can manage framing, buffering, and protocol conversion. Dedicated DSP slices can support filtering or modulation-related arithmetic. Designers should assign banks according to voltage and interface rules, preserve timing margins, and verify the exact transceiver and I/O standards supported by the selected Artix-7 speed grade.
Được đề xuất
Video and Image Processing
The XC7A50T-L1CSG324I supports compact image-processing and video-control systems that benefit from parallel datapaths rather than sequential execution. Its 120 DSP slices can perform filtering and arithmetic operations in parallel, and its 2,700 Kb of block RAM provides local storage for lines, frames, or intermediate coefficients. The 210 I/O allow connection to image sensors, capture devices, and displays under appropriate bank constraints. The design should include pipeline balancing and bandwidth analysis to ensure that storage, DSP, and I/O resources do not become the limiting stage.
Được đề xuất
Test and Measurement Instrumentation
The XC7A50T-L1CSG324I is appropriate for programmable instrumentation that combines acquisition, timing, and real-time processing. Multiple acquisition channels can be buffered by the 2,700 Kb of block RAM while the 120 DSP slices execute filters, correlations, or calibration algorithms. Its 210 user I/O support digital triggers, counters, status signals, and external test ports. Because measurement accuracy can depend on clean references and stable power, the board should provide regulated rails, local decoupling, controlled clock distribution, and input-impedance planning for sensitive analog front ends.
Được đề xuất
Embedded Edge Computing
The XC7A50T-L1CSG324I suits embedded edge systems that need hardware parallelism, flexible interfaces, and moderate on-chip memory. The 52,160 logic cells can implement control logic or lightweight data processing, while 120 DSP slices accelerate selected workloads without requiring a separate accelerator. Its industrial temperature range and compact 18 mm by 18 mm CSBGA package support space-constrained embedded equipment. Power sequencing, configuration storage, thermal performance, and secure design requirements should be addressed at the board level rather than treated as consequences of the logic-cell count alone.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7A50T-L1CSG324I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7A50T-1CSG324I | XC7A50T-2CSG324I | XC7A50T-1CSG324C | XC7A50T-2CSG324C | XC7A50T-1CSG324E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-pin CSBGA | 324-pin CSBGA - same | 324-pin CSBGA - same | 324-pin CSBGA - same | 324-pin CSBGA - same | 324-pin CSBGA - same |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells |
| Programmable I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O |
| DSP Slices | 120 slices | 120 slices | 120 slices | 120 slices | 120 slices | 120 slices |
| Block RAM | 2,700 Kb | 2,700 Kb | 2,700 Kb | 2,700 Kb | 2,700 Kb | 2,700 Kb |
| Speed Designation | L1 | 1 | 2 | 1 | 2 | 1 |
Bảo phân biệt quan trọng
- Retains the industrial ordering configuration while providing a direct same-footprint family alternative (vsXC7A50T-1CSG324I)
- Supports the same complete device-resource configuration as the 2 speed-grade option (vsXC7A50T-2CSG324I)
- Maintains 210 I/O and 120 DSP slices in a temperature-grade-compatible family option (vsXC7A50T-1CSG324C)
Ghi chú thiết kế
Plan the FPGA power tree around the complete Artix-7 device rather than the 0.95 V core rail alone. The exact core, I/O, and auxiliary rail requirements must be taken from the CSG324 power-pin table. Place local bulk and high-frequency decoupling at the relevant supply balls, keep switching-regulator loops compact, and use separate filtering paths for sensitive clock or reference connections. Decoupling values and sequencing delays must be selected from the AMD power-guidance document and the highest expected operating current.
The 18 mm by 18 mm CSBGA contains 324 contacts, so escape routing and return-path continuity determine whether the design meets timing. Follow the AMD package pinout files and recommended PCB stack-up, maintain adequate ball escape spacing, and route clock inputs away from high-slew-rate data paths. Assign I/O standards only after checking bank voltage compatibility. Because BGA assembly hides solder joints, plan X-ray or equivalent assembly inspection and define test points for configuration, power rails, and critical clocks.
Treat every external interface as a constrained signal path rather than a simple pin assignment. Use the selected I/O standard's drive strength, slew rate, and timing characteristics to control edge degradation, and keep clock networks short and referenced to a continuous return plane. High-fanout enables and configuration signals should receive appropriate source termination where required. Validate the final stack-up and interface topology with the AMD IBIS or SPICE model and board-level simulation before fabrication.
Do not treat a same-package Artix-7 ordering code as automatically interchangeable. A speed-grade change can alter achievable timing, while a temperature-grade change can invalidate environmental assumptions even though the CSG324 footprint remains identical. Before substitution, compare the exact suffix, supported I/O standards, core voltage range, operating-temperature limits, configuration method, and ordering restrictions. Re-run synthesis, implementation, and timing analysis with the replacement device selected, and review automotive or industrial qualification requirements for the finished system.
Thông tin tuân thủ
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. AEC-Q100 is not applicable because this is an industrial FPGA rather than an automotive-qualified component.