XC7A50T-L1CSG324I - 52,160-Cell Artix-7 FPGA | AMD Xilinx
MPN: XC7A50T-L1CSG324I ✓ 啟用中XC7A50T-L1CSG324I 概覽
A field-programmable gate array is a semiconductor whose digital logic, memory, signal processing, and I/O behavior are configured after manufacture. Within the product hierarchy, the XC7A50T belongs to the Artix-7 FPGA family, combines programmable logic with fixed resources such as block RAM and DSP blocks, and is intended for compact systems requiring moderate logic density, substantial parallel processing, and flexible interface support.
The principal device characteristics include 52,160 logic cells, 210 configurable I/O, 120 DSP slices, and 2,700 Kb of block RAM. Its 28 nm process technology supports the 7-series family's combination of high I/O bandwidth and low power consumption. The L1 speed designation and CSG324 package identify a particular performance and mechanical configuration, while the I suffix denotes the industrial-temperature ordering option.
The XC7A50T architecture provides dedicated arithmetic resources for DSP-intensive algorithms, distributed and block memory for data storage, clock-management resources including PLL and MMCM functions, and programmable I/O for external interfaces. These resources allow parallel datapaths to operate concurrently, making the FPGA suitable when deterministic hardware parallelism is more valuable than a sequential processor approach.
Typical uses include industrial automation, robotics, embedded control, communications, instrumentation, video processing, and compact edge-computing systems. A 210-I/O device can connect multiple external buses, capture channels, display interfaces, and control signals, while the 120 DSP slices accelerate filters, transforms, and fixed-point signal-processing workloads.
Designers should treat the FPGA as a multi-rail, high-pin-count device requiring a carefully planned PCB stack-up, controlled power sequencing, complete decoupling, and signal-integrity analysis for high-speed interfaces. The exact pin assignments, bank power requirements, configuration method, and supported I/O standards should be selected from the package pinout and Artix-7 documentation for the intended board revision.
This product record combines the exact device identity, package and resource details with practical comparison and replacement guidance. It highlights where speed-grade and temperature-grade changes affect substitution, while preserving the requirement for a true 324-pin CSBGA footprint rather than a merely similar FPGA.
直接替換替代品,適用於 XC7A50T-L1CSG324I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7A50T-L1CSG324I (相同外形與佔位) — 差異在於 DSP Slices, Package, Block RAM, Logic Cells, Mounting Type.
XC7A50T-1CSG324I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7A50T-2CSG324I
✅ 直接替換✓ 有庫存
$25.4545 / 單位
查看資料表 →XC7A50T-1CSG324C
✅ 直接替換📋 參考替代品(不在目錄中)
XC7A50T-2CSG324C
✅ 直接替換📋 參考替代品(不在目錄中)
XC7A50T-1CSG324E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A50T-L1CSG324I 最大額定值與電氣特性
| FPGA Family | Artix-7 |
| Logic Cells | 52,160 cells |
| Programmable I/O | 210 I/O |
| Block RAM | 2,700 Kb |
| DSP Slices | 120 slices |
| Process Technology | 28 nm HPL HKMG |
| Core Supply Voltage | 0.95 V nominal |
| Core Supply Voltage Range | 0.92 V to 0.98 V |
| 封裝 | 324-pin CSBGA, 18 mm x 18 mm |
| Device Type | Field-programmable gate array |
| Temperature Range | -40 °C to +100 °C |
| Temperature Grade | Industrial |
| I/O Bandwidth | 2.9 Tb/s |
| DSP Throughput | 5.3 TMAC/s |
| Clock Management | PLL and MMCM |
| 安裝類型 | Surface-mount BGA |
XC7A50T-L1CSG324I 324-pin csbga, 18 mm x 18 mm 腳位配置指南
XC7A50T-L1CSG324I(324-pin csbga, 18 mm x 18 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7A50T-L1CSG324I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7A50T-L1CSG324I 適用於 6 應用s: Industrial Automation and PLC Control, Robotics Control and Sensor Fusion, Communications and Protocol Bridging, Video and Image Processing, Test and Measurement Instrumentation, Embedded Edge Computing.
Industrial Automation and PLC Control
The XC7A50T-L1CSG324I fits machine-control systems that combine deterministic logic, sensor acquisition, and communication interfaces. Its 52,160 logic cells support state machines, interlocks, motion sequencing, and protocol handling, while 210 I/O provide substantial connectivity for encoders, limit switches, actuators, and field buses. The industrial -40 °C to +100 °C range suits factory equipment. Use the CSG324 ball map and bank constraints to assign external interfaces, and validate timing with the selected 0.92 V to 0.98 V core-supply range.
推薦
Robotics Control and Sensor Fusion
The XC7A50T-L1CSG324I is useful in robotic controllers that must process multiple sensor streams and issue precise motion commands in parallel. Its 120 DSP slices can accelerate filtering and fixed-point transforms, while the 52,160 logic cells support trajectory generation, state estimation, safety interlocks, and communication protocols. The 210-I/O interface count allows simultaneous connection of encoders, force sensors, motor drivers, and industrial links. Its industrial temperature range supports mobile or factory robotic platforms where board-level thermal design remains critical.
推薦
Communications and Protocol Bridging
The XC7A50T-L1CSG324I can serve as a configurable communications gateway or protocol bridge when several serial or parallel interfaces must be handled concurrently. Its 210 I/O and 2.9 Tb/s family-level I/O bandwidth provide resources for high-speed interfaces, while programmable logic can manage framing, buffering, and protocol conversion. Dedicated DSP slices can support filtering or modulation-related arithmetic. Designers should assign banks according to voltage and interface rules, preserve timing margins, and verify the exact transceiver and I/O standards supported by the selected Artix-7 speed grade.
推薦
Video and Image Processing
The XC7A50T-L1CSG324I supports compact image-processing and video-control systems that benefit from parallel datapaths rather than sequential execution. Its 120 DSP slices can perform filtering and arithmetic operations in parallel, and its 2,700 Kb of block RAM provides local storage for lines, frames, or intermediate coefficients. The 210 I/O allow connection to image sensors, capture devices, and displays under appropriate bank constraints. The design should include pipeline balancing and bandwidth analysis to ensure that storage, DSP, and I/O resources do not become the limiting stage.
推薦
Test and Measurement Instrumentation
The XC7A50T-L1CSG324I is appropriate for programmable instrumentation that combines acquisition, timing, and real-time processing. Multiple acquisition channels can be buffered by the 2,700 Kb of block RAM while the 120 DSP slices execute filters, correlations, or calibration algorithms. Its 210 user I/O support digital triggers, counters, status signals, and external test ports. Because measurement accuracy can depend on clean references and stable power, the board should provide regulated rails, local decoupling, controlled clock distribution, and input-impedance planning for sensitive analog front ends.
推薦
Embedded Edge Computing
The XC7A50T-L1CSG324I suits embedded edge systems that need hardware parallelism, flexible interfaces, and moderate on-chip memory. The 52,160 logic cells can implement control logic or lightweight data processing, while 120 DSP slices accelerate selected workloads without requiring a separate accelerator. Its industrial temperature range and compact 18 mm by 18 mm CSBGA package support space-constrained embedded equipment. Power sequencing, configuration storage, thermal performance, and secure design requirements should be addressed at the board level rather than treated as consequences of the logic-cell count alone.
推薦
推薦產品摘要
工程參考資料,適用於 XC7A50T-L1CSG324I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7A50T-1CSG324I | XC7A50T-2CSG324I | XC7A50T-1CSG324C | XC7A50T-2CSG324C | XC7A50T-1CSG324E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-pin CSBGA | 324-pin CSBGA - same | 324-pin CSBGA - same | 324-pin CSBGA - same | 324-pin CSBGA - same | 324-pin CSBGA - same |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells |
| Programmable I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O |
| DSP Slices | 120 slices | 120 slices | 120 slices | 120 slices | 120 slices | 120 slices |
| Block RAM | 2,700 Kb | 2,700 Kb | 2,700 Kb | 2,700 Kb | 2,700 Kb | 2,700 Kb |
| Speed Designation | L1 | 1 | 2 | 1 | 2 | 1 |
主要差異化特點
- Retains the industrial ordering configuration while providing a direct same-footprint family alternative (對比XC7A50T-1CSG324I)
- Supports the same complete device-resource configuration as the 2 speed-grade option (對比XC7A50T-2CSG324I)
- Maintains 210 I/O and 120 DSP slices in a temperature-grade-compatible family option (對比XC7A50T-1CSG324C)
設計說明
Plan the FPGA power tree around the complete Artix-7 device rather than the 0.95 V core rail alone. The exact core, I/O, and auxiliary rail requirements must be taken from the CSG324 power-pin table. Place local bulk and high-frequency decoupling at the relevant supply balls, keep switching-regulator loops compact, and use separate filtering paths for sensitive clock or reference connections. Decoupling values and sequencing delays must be selected from the AMD power-guidance document and the highest expected operating current.
The 18 mm by 18 mm CSBGA contains 324 contacts, so escape routing and return-path continuity determine whether the design meets timing. Follow the AMD package pinout files and recommended PCB stack-up, maintain adequate ball escape spacing, and route clock inputs away from high-slew-rate data paths. Assign I/O standards only after checking bank voltage compatibility. Because BGA assembly hides solder joints, plan X-ray or equivalent assembly inspection and define test points for configuration, power rails, and critical clocks.
Treat every external interface as a constrained signal path rather than a simple pin assignment. Use the selected I/O standard's drive strength, slew rate, and timing characteristics to control edge degradation, and keep clock networks short and referenced to a continuous return plane. High-fanout enables and configuration signals should receive appropriate source termination where required. Validate the final stack-up and interface topology with the AMD IBIS or SPICE model and board-level simulation before fabrication.
Do not treat a same-package Artix-7 ordering code as automatically interchangeable. A speed-grade change can alter achievable timing, while a temperature-grade change can invalidate environmental assumptions even though the CSG324 footprint remains identical. Before substitution, compare the exact suffix, supported I/O standards, core voltage range, operating-temperature limits, configuration method, and ordering restrictions. Re-run synthesis, implementation, and timing analysis with the replacement device selected, and review automotive or industrial qualification requirements for the finished system.
合規資訊
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. AEC-Q100 is not applicable because this is an industrial FPGA rather than an automotive-qualified component.