XC7K410T-1FFG676I - 406,720-Cell Kintex-7 FPGA | AMD
MPN: XC7K410T-1FFG676I ✓ Hoạt độngXC7K410T-1FFG676I Tóm tắt
A Kintex-7 FPGA belongs to the programmable-logic hierarchy: FPGA, programmable logic device, digital semiconductor, and system-level configurable IC. Unlike fixed-function processors or application-specific integrated circuits, an FPGA implements parallel data paths, control logic, serial interfaces, and signal-processing functions in programmable silicon. This makes the device useful where product requirements evolve, where parallel throughput is more important than sequential instruction efficiency, or where a single device can consolidate multiple discrete logic functions.
The XC7K410T provides a logic-cell count of 406,720 and supports up to 400 I/O for this device and package combination. Its 28 nm Kintex-7 architecture is designed to balance performance and power while providing high ratios of DSP resources for communications, industrial imaging, and signal-processing systems. The family supports mainstream connectivity including PCI Express Gen3 and 10 Gigabit Ethernet, enabling high-bandwidth host interfaces and network-facing programmable data paths.
The -1 speed grade is intended for designs that require a predictable performance class without moving to the faster -2 grade. Because FPGA timing closure depends on device speed, utilization, clocking, I/O standards, and routing congestion, an FPGA design should be implemented and timing-analyzed for the exact XC7K410T-1FFG676I device rather than inferred from a generic Kintex-7 family document. The device also contains dedicated resources such as block RAM, DSP blocks, clock-management circuitry, and high-speed transceivers.
Typical uses include high-throughput protocol handling, 10 Gigabit Ethernet interfaces, PCI Express endpoint or bridge designs, industrial control and test systems, high-channel-count data acquisition, and programmable video or communications pipelines. The 400 available I/O allow a system to combine multiple interface standards while retaining programmable logic for protocol termination, packet processing, buffering, and control. Configurable memory and DSP resources can accelerate functions that would otherwise require substantial external logic.
The primary PCB consideration is the 676-ball FCBGA footprint. Designers must follow the AMD package pinout files and UG475 guidance for ball assignment, power-plane construction, decoupling, and high-speed routing. Differential pairs and high-speed transceiver paths require controlled impedance, length matching, and continuous reference planes. Thermal design must also account for the concentration of high-utilization logic and DSP activity in the center of the device.
This page combines device specifications, package details, pricing workflows, same-package migration options, comparison data, and practical implementation guidance. It helps engineers identify whether the -1 speed grade and industrial package configuration fit a new Kintex-7 design before committing to a PCB layout or long-lead program.
Bộ thay thế dễ dàng lắp đặt cho XC7K410T-1FFG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7K410T-1FFG676I (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Block RAM, Core Voltage, Device Type.
XC7K410T-1FFG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K410T-2FFG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K410T-2FFG676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7K410T-1FFG676I Tỷ lệ tối đa & tính chất điện
| Device Type | Kintex-7 field-programmable gate array |
| Logic Cells | 406,720 cells |
| Process Technology | 28 nm |
| I/O Count | 400 I/O |
| Tần số xung maksimum | 400 MHz |
| Core Voltage | 0.970 V to 1.03 V |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| Hộp | 676-ball FCBGA, FFG676 |
| Block RAM | 28,620 Kb |
| Clock Management | MMCM and PLL resources |
| High-Speed Serial Support | PCI Express Gen3 and 10 Gigabit Ethernet |
| DSP Support | Dedicated DSP resources |
| Kiểu lắp đặt | Surface mount |
| Packaging Form | Tray |
Hướng dẫn cấu hình chân XC7K410T-1FFG676I 676-ball fcbga, ffg676
Cấu hình chân cho XC7K410T-1FFG676I (676-ball fcbga, ffg676 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7K410T-1FFG676I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7K410T-1FFG676I phù hợp cho 6 Áp dụngs: PCI Express Gen3 Endpoint Systems, 10 Gigabit Ethernet Data Planes, High-Channel-Count Data Acquisition, Industrial Control and Instrumentation, Programmable Video Processing, Communications Protocol Concentrators.
PCI Express Gen3 Endpoint Systems
The XC7K410T-1FFG676I fits PCI Express Gen3 endpoint and accelerator designs because the Kintex-7 family supports PCI Express Gen3 and provides 406,720 programmable logic cells for protocol logic, DMA engines, queues, and control paths. Its 400 I/O also give an implementation room to combine high-speed transceivers with control, status, and optional legacy interfaces. Designers should allocate the transceiver pins required by the target lane count and use the AMD package files before PCB routing. The -1 speed grade must be used for timing closure, and any upgrade to a -2 FFG676 variant requires regenerated timing results even though the physical footprint remains unchanged.
Được đề xuất
10 Gigabit Ethernet Data Planes
The XC7K410T-1FFG676I is suitable for 10 Gigabit Ethernet line-card and network-interface designs because its Kintex-7 architecture combines high-speed serial capability with substantial programmable logic for packet classification, FIFO management, traffic shaping, and protocol processing. The 406,720-cell density allows network functions to be consolidated without immediately adding another parallel device. A practical implementation must reserve transceiver channels for the required lanes, provide a clean reference clock, and maintain controlled-impedance differential routing over the FCBGA. System timing, BER, thermal behavior, and compliance should be verified at the line rate rather than inferred from logic-cell capacity alone.
Được đề xuất
High-Channel-Count Data Acquisition
The XC7K410T-1FFG676I can implement high-channel-count acquisition and real-time processing systems using its 400 I/O, large block-memory capacity, and dedicated DSP resources. Multiple input channels can be captured, filtered, decimated, and routed through programmable pipelines without relying entirely on a sequential processor. Engineers should allocate I/O pins according to voltage-tolerance and banking rules, check simultaneous-switching-noise limits, and confirm that each selected I/O standard is compatible with the chosen bank voltage. The 676-ball FCBGA also requires distributed decoupling and adequate thermal copper so that sustained DSP and logic utilization does not create a concentrated hot spot.
Được đề xuất
Industrial Control and Instrumentation
The XC7K410T-1FFG676I fits industrial control, instrumentation, and deterministic test systems that require flexible parallel logic, multiple interface types, and long product-development flexibility. Its programmable fabric can implement motion sequencing, protocol bridges, timing controls, acquisition logic, and supervisory functions while dedicated DSP blocks handle filters and transforms. The industrial temperature suffix supports designs intended for extended industrial environments, subject to the exact operating limits listed for this orderable part. Designers should use the device-specific pinout to define power, ground, configuration, and I/O banks, then validate timing and signal integrity for every switching interface implemented on the board.
Được đề xuất
Programmable Video Processing
The XC7K410T-1FFG676I supports programmable video pipelines because its 406,720 logic cells, block RAM, DSP resources, and 400 I/O provide substantial capacity for parallel pixel and packet processing. Possible blocks include image acquisition, color conversion, scaling, filtering, frame buffering, and format conversion. Resource sharing should be planned carefully so that multiple video streams do not exceed DSP, RAM, bandwidth, or timing limits. I/O standards and clock relationships must be mapped through the FFG676 package data, while high-speed video interfaces require controlled-impedance routing and deterministic clocking. Vivado timing and utilization reports for the exact -1 device are required before hardware implementation.
Được đề xuất
Communications Protocol Concentrators
The XC7K410T-1FFG676I is appropriate for communications concentrators that must terminate and translate multiple serial or parallel protocols in a single programmable device. The high logic-cell count supports state machines, packet parsers, buffers, channelizers, and monitoring functions, while DSP resources can accelerate filters or transforms. Pin planning must account for each electrical standard, I/O-bank voltage, transceiver capability, and clocking domain before assignment. For migration among the listed FFG676 variants, the footprint can remain unchanged, but the target speed grade and temperature suffix must be selected early because they affect timing analysis, thermal validation, and qualification requirements.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7K410T-1FFG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7K410T-1FFG676C | XC7K410T-2FFG676C | XC7K410T-2FFG676I |
|---|---|---|---|---|
| Package | 676-ball FCBGA, FFG676 | 676-ball FCBGA, FFG676 | 676-ball FCBGA, FFG676 | 676-ball FCBGA, FFG676 |
| Brand | AMD | AMD | AMD | AMD |
| Speed Grade | -1 | -1 | -2 | -2 |
| Temperature Suffix | I - Industrial | C - Commercial | C - Commercial | I - Industrial |
Bảo phân biệt quan trọng
- Industrial temperature suffix within the same FFG676 migration family (vsXC7K410T-1FFG676C)
- Lower speed grade provides a defined timing target without requiring the -2 device (vsXC7K410T-2FFG676I)
- High logic density with 400 user I/O in a 676-ball FCBGA (vsXC7K410T-1FFG676C)
Ghi chú thiết kế
Use the AMD FFG676 package-device pinout file for every ball assignment and cross-check it against UG475 before schematic capture. The 676-ball FCBGA includes power, ground, configuration, user I/O, and fixed-function balls; placing only the 400 user I/Os can lead to incorrect power-plane or configuration connections. Keep the board design tied to the exact XC7K410T device and FFG676 package, and do not reuse ball assignments from an FBG676 or FFG900 variant without an explicit package comparison.
Plan the FPGA power network as a multilayer structure with closely placed decoupling and continuous reference planes beneath the FCBGA. Separate supplies for core, I/O banks, auxiliary rails, and configuration requirements should follow the manufacturer power-decoupling recommendations. Bank voltage selection must match every assigned I/O standard. During implementation, use the -1 device power report for the intended clocking, resource utilization, temperature, and activity assumptions, then verify rail sequencing and power-up behavior on the completed board.
Provide uninterrupted thermal copper beneath and around the 676-ball FPGA to spread heat from the central logic and DSP region into the PCB. Estimate worst-case junction temperature from the implemented design's power and the board's actual thermal path rather than relying on a generic package figure. Keep thermal vias effective by avoiding blocked antipads and plated barrels beneath power and ground balls. Validate the assembled board at the highest expected ambient temperature and utilization to confirm that the industrial-temperature choice remains within its limits.
Route high-speed differential signals over uninterrupted reference planes with the PCB stack-up's calculated controlled impedance. Transceiver and clock paths require shortest practical connections, suitable via transitions, and matched length where the interface specification demands it. Keep noisy or switching signals away from sensitive clock and reference inputs, and follow AMD's power and connectivity guidance for each bank. Post-layout extraction and board-level SI simulation are appropriate for PCIe Gen3, 10 Gigabit Ethernet, or other high-rate interfaces.
Thông tin tuân thủ
The industrial suffix identifies the temperature grade but does not by itself establish automotive qualification or environmental-compliance status. Compliance attributes were not found for this exact orderable device and remain unknown.