產品(44,000+)

XC2C256-6VQ100C - 256-Macrocell CPLD | AMD Xilinx
XC2C256-6VQ100C

XC2C256-6VQ100C - 256-Macrocell CPLD | AMD Xilinx

AMD Xilinx XC2C256-6VQ100C is a CoolRunner-II complex programmable logic device with 256 macrocells, 6K logic gates, an operating speed grade of 6, and a 100-pin VQFP package. The device combines programmable non-volatile storage, reusable logic resources, and a 0.18 µm CMOS implementation for designs requiring deterministic board-level logic. A complex programmable logic device is a user-programmable semiconductor positioned between fixed-function logic and field-programmable gate arrays. Whereas an application-specific integrated circuit implements one predefined function, a CPLD allows logic equations, state machines, interfaces, and control logic to be changed without replacing the device. The CoolRunner-II family combines this reconfigurability with low-power operation and predictable timing for communications, industrial control, consumer, and embedded systems. The XC2C256-6VQ100C provides 256 macrocells and approximately 6K gates for moderately complex control logic. Its six speed grade supports designs operating at up to 256 MHz according to the product specification. The 1.8 V process designation identifies the technology used for the programmable core, while the 100-pin VQFP package supports conventional surface-mount assembly and dense external connectivity. CoolRunner-II architecture is suited to designs that benefit from non-volatile configuration. Stored configuration allows the logic state to remain available without continuous configuration assistance from an external controller. The 256-macrocell density can support parallel data acquisition logic, protocol conversion, control sequencing, and glue-logic functions without moving to a larger programmable-logic device. Typical applications include industrial controller interface logic, communications equipment, instrumentation, embedded boot and sequencing, and low-power battery-operated products. The device is particularly useful when several clocks, counters, state machines, and asynchronous interfaces must operate concurrently while preserving a straightforward board-level implementation. Designers should verify signal integrity, power-supply sequencing, and I/O constraints against the manufacturer datasheet before layout release. Because the exact pin assignments, timing tables, and electrical limits are design-critical, use the AMD/Xilinx package drawing and CoolRunner-II datasheet to assign every ball or lead, especially for differential, configuration, and dedicated pins. This product page combines the device architecture, verified performance markers, same-package replacement options, application guidance, and engineering-focused design notes. These resources help engineers evaluate the XC2C256-6VQ100C as a low-power, non-volatile CPLD while preserving a practical path to PCB reuse and second sourcing.

詢價 聯絡我們
XC2C256-7CP132C - 256-Macrocell 152MHz CPLD | AMD Xilinx
XC2C256-7CP132C

XC2C256-7CP132C - 256-Macrocell 152MHz CPLD | AMD Xilinx

The AMD Xilinx XC2C256-7CP132C is a 256-macrocell Complex Programmable Logic Device from the CoolRunner-II family, delivering up to 152 MHz performance in a 132-ball CP132 package. It provides approximately 6K system gates and uses advanced 0.18 µm CMOS technology for low-power programmable logic designs. A CPLD is a programmable logic device that combines multiple configurable logic blocks, programmable interconnect, and I/O resources into one integrated circuit. In the product hierarchy, a CPLD is a programmable-logic semiconductor, commonly placed between simple programmable logic and more complex FPGAs. CoolRunner-II devices are designed for deterministic, nonvolatile configuration, fast operation, and low power consumption in compact control, interface, and glue-logic systems. The XC2C256-7CP132C combines 256 macrocells with a 152 MHz maximum operating frequency. Its 132-ball package supports a high pin count for external connectivity, while the -7 speed designation identifies the performance grade and the C suffix identifies the commercial temperature option. The device is suitable for industrial control logic, communication interfaces, bus decoding, signal conditioning, embedded control, and portable or low-power programmable systems. The CPLD architecture supports implementation of combinational and sequential logic without requiring a mask change or external configuration PROM. I/O structures allow design-specific pin assignment and support integration with surrounding digital systems. The architecture is particularly useful where deterministic timing, compact logic density, low standby power, and a short design cycle matter more than the very high logic capacity of an FPGA. Typical uses include industrial acquisition and control boards, communications line-interface logic, low-power instrumentation, test and measurement adapters, and embedded systems requiring nonvolatile reconfiguration. The 132-ball package provides a high-density connection interface, but board layout must carefully account for power, ground, signal-integrity, and programming requirements. When selecting this device, verify the exact I/O standards, supported clocking, configuration method, temperature range, and power requirements against the manufacturer datasheet before layout release. For a drop-in replacement, the package, pinout, speed grade, temperature grade, and device resources must all match; a similarly named XC2C256 variant with another package is not a substitute. This product page combines the verified device identity, package information, performance figures, application guidance, and drop-in comparison details to help engineers evaluate the XC2C256-7CP132C for programmable-logic designs.

詢價 聯絡我們
XC2C256-7CP132I - 256-Macrocell 6.7ns CPLD | AMD
XC2C256-7CP132I

XC2C256-7CP132I - 256-Macrocell 6.7ns CPLD | AMD

The AMD XC2C256-7CP132I is a CoolRunner-II complex programmable logic device with 256 macrocells, a 6.7 ns speed grade, 88 user I/Os, and a 132-ball CSBGA package. Designed around 0.18 µm CMOS technology and a 1.8 V supply, the device provides programmable logic for real-time signal processing, communications, industrial automation, and custom hardware acceleration. A complex programmable logic device, or CPLD, combines multiple programmable logic arrays with a deterministic interconnect structure. Within the programmable-logic hierarchy, the XC2C256 belongs to the CoolRunner-II CPLD family and provides nonvolatile, reprogrammable implementation of combinational and sequential logic. Compared with an FPGA, this architecture offers predictable routing and a relatively simple design flow for glue logic, control logic, and compact system functions. The CoolRunner-II family is optimized for 1.8 V systems and offers pin-to-pin delays as fast as 5.7 ns across the family. The XC2C256 contains 256 macrocells and approximately 6,000 logic gates. Its 132-ball CSBGA package supports compact PCB layouts, while the industrial temperature grade is intended for equipment operating across extended industrial temperature conditions. The target part uses a 6.7 ns speed designation, placing it between the faster and slower device grades in the CoolRunner-II portfolio. Its 0.18 µm CMOS implementation supports high integration in a low-voltage design. The 88-user-I/O configuration provides substantial connectivity for buses, control signals, counters, state machines, and interface logic without requiring a larger programmable-logic device. Typical implementations include industrial control and automation, communications equipment, embedded interface logic, real-time signal processing, and hardware acceleration. Its macrocell-based organization is particularly useful when a design requires stable timing, compact logic density, and straightforward reconfiguration compared with a much larger FPGA or an application-specific standard product. PCB design should preserve the manufacturer's recommended power, ground, clock, and decoupling arrangements because the 132-ball package requires careful via and escape-routing planning. Validate signal integrity on high-speed board transitions and confirm the device's supported I/O standards against the system design before release. This product page combines the key CoolRunner-II electrical characteristics, pin-compatible selection guidance, temperature-grade distinctions, and practical PCB considerations into a concise engineering reference for design, sourcing, and lifecycle-risk reviews.

詢價 聯絡我們
XC2C256-7CPG132I - 256-Macrocell 152MHz CPLD | AMD
XC2C256-7CPG132I

XC2C256-7CPG132I - 256-Macrocell 152MHz CPLD | AMD

The AMD XC2C256-7CPG132I is a CoolRunner-II complex programmable logic device (CPLD) with 256 macrocells, approximately 6,000 system gates, a 6.7 ns specified delay class, and operation up to 152 MHz. It is housed in a 132-ball CSBGA package and is intended for industrial-temperature applications requiring deterministic, nonvolatile programmable logic. The device combines XPLA3 macrocell architecture with in-system programmability and low standby power, making it suitable for compact control, interface, and signal-processing systems. A CPLD is a semiconductor in the programmable-logic hierarchy: it sits between fixed-function logic devices and larger FPGAs. Unlike mask-programmed logic, a CPLD can be configured after manufacture, shortening development cycles and enabling field updates. The XC2C256 belongs to the CoolRunner-II family and combines a nonvolatile XPLA3 architecture with advanced CMOS technology, providing deterministic timing for control logic, bus arbitration, state machines, and peripheral interfacing. The principal device characteristics include 256 macrocells, approximately 6K system gates, a 6.7 ns speed designation, and a maximum operating frequency listed as 152 MHz. The device also provides low-power behavior, including a listed quiescent current of approximately 13 microamperes. Its industrial temperature designation and 132-ball surface-mount package support compact industrial embedded systems while supporting in-system programming for configuration and recovery. In-system programmability allows a board designer to load or update the CPLD logic without replacing the component. This is valuable when field configuration must follow product revision, board test, or system diagnostics. Because the macrocell array uses nonvolatile configuration, the device does not depend on an external configuration PROM for normal operation after programming, simplifying board design and reducing the number of associated support components. Typical applications include industrial controller logic, data acquisition front ends, communications protocol bridges, low-power embedded control, display and keypad scanning, general-purpose I/O expansion, and programmable signal conditioning. The 256-macrocell capacity allows several parallel state machines and interface blocks to be consolidated into one device, while the 152 MHz operating capability supports timing-sensitive control paths and data movers. PCB design should account for the dense 132-ball CSBGA footprint, clean supply distribution, ground-plane continuity, and controlled clock routing. Program, configuration, and I/O signals should be assigned according to the DS094 pin-description tables. Because package variants change ball availability, verify the selected replacement against the complete pin table before committing it to an existing layout rather than relying only on the family name. This page combines the manufacturer device documentation, package information, lifecycle context, application guidance, and same-package CoolRunner-II alternatives to support design selection and sourcing. It also distinguishes true pin-compatible device options from family members offered in other packages, preventing a package-only match from being mistaken for a drop-in replacement.

詢價 聯絡我們
XC2C256-7FT256C - 256-Macrocell 7 ns CPLD | AMD | FTBGA
XC2C256-7FT256C

XC2C256-7FT256C - 256-Macrocell 7 ns CPLD | AMD | FTBGA

The AMD Xilinx XC2C256-7FT256C is a CoolRunner-II complex programmable logic device with 256 macrocells, approximately 6000 system gates, a 7.5 ns propagation delay, and a 256-pin FTBGA package. It combines 184 I/O operations with non-volatile, instant-on configuration to provide deterministic programmable logic for industrial, communications, consumer, and embedded control systems. A complex programmable logic device, or CPLD, is a user-programmable semiconductor within the broader FPGA and programmable-logic hierarchy. Unlike a soft microcontroller core, a CPLD implements Boolean equations, counters, state machines, interfaces, and control logic directly in a non-volatile configuration fabric. This makes the XC2C256 well suited to boot-time logic, deterministic control paths, signal conditioning, protocol bridging, and fixed-function logic replacement. The CoolRunner-II architecture provides 256 macrocells, approximately 6000 system gates, and a 7.5 ns propagation-delay grade. The device supports 184 I/O operations according to product listings, while its 256-pin FTBGA package provides the required interconnect density for a logic-dense design. Non-volatile configuration allows the programmed function to become available without an external configuration PROM after power-up. This device belongs to the speed-grade and package family identified as XC2C256. The “-7” designation identifies the 7.5 ns performance class, while the “FT256C” portion identifies the 256-pin package and commercial temperature option. The 1.55 mm seated-height measurement and the 256-pin BGA format should be considered together when defining PCB stack-up, solder-mask and paste patterns, component placement, and board-level inspection requirements. Typical uses include industrial control and sequencing, communications infrastructure, embedded system glue logic, programmable interface consolidation, and compact control systems requiring non-volatile configuration. In each case, the CoolRunner-II fabric can combine multiple finite-state machines and datapath elements while retaining deterministic behavior after power restoration. PCB implementation requires particular care because the 256-pin FTBGA has a dense ball pitch and cannot be inspected visually after soldering in the same way as a leaded package. Follow AMD's package and PCB design guidance, preserve the recommended power and ground-plane arrangement, and qualify the solder-paste stencil, reflow profile, and X-ray inspection process before volume production. This page organizes the principal device characteristics, package information, practical application guidance, and traceable replacement options around the XC2C256-7FT256C. It also distinguishes device-family alternatives from true pin-compatible drop-in choices so engineers can assess timing, package, temperature grade, and programmed-logic implications before making a design change.

詢價 聯絡我們
XC2C256-7FT256I - 256-Macro-Cell CPLD | AMD | Industrial
XC2C256-7FT256I

XC2C256-7FT256I - 256-Macro-Cell CPLD | AMD | Industrial

The AMD XC2C256-7FT256I is a CoolRunner-II complex programmable logic device (CPLD) with 256 macro cells, approximately 6,000 gates, and a 256-pin FTBGA package. It operates from a 1.8 V core using 0.18 µm CMOS technology, supports clock speeds up to 256 MHz, and is specified for an industrial temperature range of -40°C to 85°C. A CPLD is a programmable digital semiconductor that combines programmable logic architecture with non-volatile configuration memory. In the product hierarchy, the XC2C256 belongs to the CoolRunner-II family of CPLDs, which sits between fixed-function logic devices and larger FPGAs. It is intended for designs that require deterministic timing, flexible logic implementation, and configuration retained in non-volatile memory. The XC2C256-7FT256I provides 256 macro cells, approximately 6,000 gates, a 256 MHz maximum clock, and a 1.8 V core supply. Its industrial temperature rating supports deployments in factory control, telecommunications equipment, instrumentation, and embedded industrial systems. The 256-pin FTBGA package also offers a high pin count for designs with substantial I/O requirements. The CoolRunner-II architecture uses a fast, deterministic interconnect structure to implement combinational and registered logic. Non-volatile configuration allows the programmed design to remain in the device after power is removed, eliminating the need for an external configuration loader during normal operation. Device configuration still requires the correct AMD/Xilinx design software and programming flow. Typical uses include bus interface logic, control-plane decoding, industrial I/O expansion, signal conditioning, and embedded system glue logic. The device can be especially useful where a small logic array, stable configuration data, and predictable timing are more valuable than the capacity and programming model of a large FPGA. PCB implementation requires careful attention to the 256-ball package, power distribution, ground integrity, and high-speed routing. Use the manufacturer package information and pinout when assigning power, configuration, clock, and user I/O signals; verify ball assignments and programmed configuration before releasing a new board. This page consolidates package, timing, application, and replacement guidance for engineers evaluating the XC2C256-7FT256I. The comparison sections also distinguish speed-grade, temperature-grade, and package options that can look similar in distributor catalogs but are not interchangeable without qualification.

詢價 聯絡我們
XC2C256-7PQ208C - 256-Macrocell CoolRunner-II CPLD | AMD/Xilinx
XC2C256-7PQ208C

XC2C256-7PQ208C - 256-Macrocell CoolRunner-II CPLD | AMD/Xilinx

The AMD/Xilinx XC2C256-7PQ208C is a 256-macrocell CoolRunner-II Complex Programmable Logic Device (CPLD) with 6,000 usable gates, a maximum toggle frequency of 152 MHz, and a 1.8V core supply, housed in a 208-pin Fine-Pitch Quad Flat Package (PQ208 / FQFP). A CPLD (Complex Programmable Logic Device) is a family of programmable logic ICs that sits above SPLDs such as GAL and PAL devices in the programmable-logic hierarchy, below FPGAs in density. CPLDs use a deterministic, macrocell-based architecture that delivers pin-to-pin timing predictability, making them the standard choice for glue logic, bus interfacing, power-up state control, and address decoding in embedded systems. The XC2C256 distinguishes itself with an ultra-low-power 0.18-micron CMOS process: unlike CPLDs based on analog sense amplifiers, CoolRunner-II uses a pure digital design technique that keeps standby current in the microampere class, a key reason designers select it for portable and battery-powered equipment. The -7 speed grade supports 152 MHz system frequency operation with deterministic pin-to-pin delays, and the device operates from a nominal 1.8V core supply (1.7V to 1.9V per manufacturer data). Architecturally, the 256 macrocells are organized into function blocks interconnected by the Advanced Interconnect Matrix (AIM), providing full, predictable connectivity. I/O banks support multiple I/O standards and the device includes Schmitt-trigger inputs, optional output slew control, and IEEE 1149.1 boundary-scan programming via the JTAG port. Typical applications include telecommunications line-card control logic, industrial control sequencing, portable consumer electronics, bus bridging, and boot-logic/state-machine control alongside larger FPGAs. The commercial temperature variant (C suffix, 0C to +70C) suits office and indoor industrial environments. For design, remember that CoolRunner-II is powered from a single 1.8V core rail; verify that your board can supply this rail and observe the datasheet power-decoupling guidance. Program the device with the AMD/Xilinx toolchain over JTAG, and reserve JTAG header space in the layout for in-system programming. This page adds value beyond the manufacturer datasheet DS094 by consolidating distributor stock channels, same-footprint temperature-grade alternatives, drop-in replacement guidance, and practical design notes in one place.

詢價 聯絡我們
XC2C256-7PQ208I - CoolRunner-II CPLD 256 Macrocells | Xilinx/AMD
XC2C256-7PQ208I

XC2C256-7PQ208I - CoolRunner-II CPLD 256 Macrocells | Xilinx/AMD

The AMD (Xilinx) XC2C256-7PQ208I is a CoolRunner-II Complex Programmable Logic Device (CPLD) with 256 macrocells and 6,000 equivalent logic gates, a -7 speed grade delivering 5.7 ns pin-to-pin delay, and a 208-pin PQFP (FQFP) surface-mount package in the industrial temperature range. A CPLD (Complex Programmable Logic Device) is a type of programmable logic IC that provides non-volatile, deterministic-timing logic implementation between simple PLDs and full FPGAs in the system hierarchy. Unlike SRAM-based FPGAs, CoolRunner-II CPLDs retain their configuration through power cycling, making them a glue-logic and sequencer staple in embedded power management IC subsystems, board bring-up, and control logic. Key features of the XC2C256-7PQ208I include optimization for 1.8V systems, as fast as 5.7 ns pin-to-pin delays, and quiescent current as low as 13 uA. The device is built on the industry-leading 0.18 micron CMOS CPLD process, with a maximum operating frequency of 152 MHz and a maximum propagation delay of 6.7 ns. Its 208-pin PQFP package with gull-wing terminals provides abundant user I/O for wide-bus interfacing, and the -7 speed grade balances performance with the family's signature low dynamic power. Architecturally, the CoolRunner-II family uses a Fab-Logic blocks structure in 0.18 um CMOS optimized for effective logic synthesis. The deterministic, single-chip timing behavior makes pin-to-pin delays predictable regardless of routing, which simplifies timing closure compared to FPGA designs. Data三星_e (Schmitt-trigger style) input options and low static current make it well suited for battery-powered and power-sensitive designs. Typical applications include industrial automation control logic, telecommunications and 5G infrastructure glue logic, medical imaging board control, aerospace and defense subsystems, and legacy FPGA/CPU bus interfacing. The industrial (-I) temperature grade supports harsh-environment deployment where commercial-grade parts are unreliable. Design consideration: the XC2C256 family is at or near end-of-life status per AMD community reports, so for new designs verify long-term supply or plan a second source strategy; ISE design tools support this family for compilation and programming. This page synthesizes drop-in alternatives within the CoolRunner-II 208-pin PQFP family, practical design notes, and sourcing guidance not found in the manufacturer datasheet (DS094).

詢價 聯絡我們
XC2C256-7PQG208C - 256-Macrocell 1.8V CPLD | AMD Xilinx
XC2C256-7PQG208C

XC2C256-7PQG208C - 256-Macrocell 1.8V CPLD | AMD Xilinx

The AMD Xilinx XC2C256-7PQG208C is an in-system-programmable CoolRunner-II complex programmable logic device with 256 macrocells, 173 I/O pins, a 5.7 ns maximum pin-to-pin delay, and a 208-pin PQFP package. It operates from a 1.7 V to 1.9 V internal core supply and is optimized for 1.8 V systems. A CPLD is a programmable semiconductor that combines multiple programmable logic blocks, embedded memory, and deterministic interconnect in one package. In the broader device hierarchy, a CPLD sits between discrete logic and FPGA devices: it provides deterministic timing, simple in-system programming, and a compact architecture for consolidating control, interface, and glue-logic functions. The CoolRunner-II architecture applies this approach in a 0.18 µm CMOS process designed to balance speed, density, and low power. Key features include up to 6,000 logic gates, 256 macrocells, 173 available I/O pins, and a maximum pin-to-pin delay of 5.7 ns. The device supports in-system programming and can reach a system frequency of 152 MHz according to the manufacturer family documentation. A quiescent current as low as 13 µA supports designs where standby power is important. The -7 suffix denotes the 5.7 ns speed grade, while PQG208 identifies the lead-free 208-pin package configuration. The CoolRunner-II architecture provides deterministic signal propagation through a global interconnect and locally programmable logic blocks. This makes the device useful where predictable timing, nonvolatile configuration retention, and fast design iteration matter more than the very high logic density of an FPGA. System designers can consolidate parallel logic, control decoding, interface translation, and state-machine functions into one programmable device rather than using multiple fixed-function components. Typical uses include industrial control, communications interfaces, portable instrumentation, embedded systems, peripheral bridging, and general-purpose logic consolidation. Its 173 I/O count is useful for designs requiring broad external connectivity, while its low quiescent current is advantageous in battery-influenced or intermittently powered equipment. The 1.8 V core target also supports compact systems designed around modern low-voltage logic rails. When planning the PCB, reserve the programming interface, maintain the manufacturer's recommended power and decoupling arrangement, and verify every signal against the DS094 pin and package tables. A speed-grade change can alter timing closure even when the package remains unchanged, so system timing should be revalidated with the replacement speed grade and the actual board implementation. This page combines the key CoolRunner-II operating characteristics, verified sourcing information, application guidance, and same-footprint replacement candidates to support faster device selection and PCB design. It also distinguishes genuine 208-pin drop-in options from smaller-package family members that cannot replace this part without layout changes.

詢價 聯絡我們
XC2C256-7PQG208I - 256-Macrocell 1.8V CPLD | Xilinx
XC2C256-7PQG208I

XC2C256-7PQG208I - 256-Macrocell 1.8V CPLD | Xilinx

The Xilinx XC2C256-7PQG208I is a CoolRunner-II complex programmable logic device with 256 macrocells, 173 user I/O, and in-system programmability, optimized for 1.8 V systems in a 208-pin PQFP package. It offers pin-to-pin delays as fast as 5.7 ns and a quiescent current as low as 13 uA. A CPLD is a programmable logic device that combines programmable AND/OR logic structures, input blocks, output logic, and embedded memory into a reconfigurable digital integrated circuit. Within the semiconductor hierarchy, a CPLD is a programmable-logic IC, a member of the FPGA and CPLD family, and a practical alternative to a small FPGA when deterministic routing, nonvolatile configuration, and relatively simple logic integration are priorities. The XC2C256 part provides a useful density level for control logic, bus arbitration, protocol interfaces, address decoding, glue logic, and embedded storage functions. Programmable output features include slew-rate limiting, bus hold, pull-up, open-drain, and programmable-ground configurations. Individual input pins can also use a Schmitt-trigger function, which helps improve noise tolerance on slowly changing or externally generated signals. The device uses a 0.18-micron CMOS CPLD architecture designed for effective logic synthesis. Its 256 macrocells provide substantially more logic capacity than small legacy GAL devices, while in-system programmability allows configuration or field updates without removing the device from its circuit board. The -7 suffix denotes a specific speed grade, while the I suffix identifies the industrial-oriented ordering variant. Typical implementations include industrial control and data-acquisition systems, embedded communications interfaces, legacy peripheral expansion, sensor conditioning, motor-control sequencing, and compact programmable logic subsystems. Its 173 I/O count is particularly useful for designs requiring numerous external connections, parallel buses, or mixed digital control and status signals. PCB design should account for the 208-pin PQFP footprint, its lead pitch, exposed supply requirements, and the package's thermal behavior. Decoupling capacitors should be placed close to the supply pins, programming and configuration traces should remain short and well controlled, and unused inputs should be terminated according to the manufacturer's system-design guidance. This page combines the CoolRunner-II DS094 technical details with application guidance, same-footprint alternatives, comparison parameters, and practical design considerations. These engineering references help engineers evaluate whether the XC2C256-7PQG208I remains suitable for an existing design or a controlled modernization without obscuring the distinctions between speed, temperature, and ordering variants.

詢價 聯絡我們
XC2C256-7TQ144C - 256-Macrocell CoolRunner-II CPLD | AMD Xilinx
XC2C256-7TQ144C

XC2C256-7TQ144C - 256-Macrocell CoolRunner-II CPLD | AMD Xilinx

The AMD Xilinx XC2C256-7TQ144C is a CoolRunner-II Complex Programmable Logic Device (CPLD) with 256 macrocells, approximately 6K gates, and a maximum toggle frequency of 152 MHz, housed in a 144-pin TQFP (Thin Quad Flat Pack, 20x20 mm) surface-mount package. A CPLD (Complex Programmable Logic Device) is a class of programmable logic integrated circuit, sitting between SPLDs such as GAL/PAL devices and FPGAs in the programmable logic hierarchy. CPLDs provide non-volatile configuration, deterministic pin-to-pin timing, and abundant macrocells interconnected through a programmable interconnect matrix, making them ideal for glue logic, state machines, and power-up control where a full FPGA would be oversized. The XC2C256-7TQ144C belongs to the CoolRunner-II family, fabricated on a 0.18 um CMOS process. Its defining characteristic is extremely low static power: unlike PAL-style CPLDs that use sense-amp interconnect, CoolRunner-II uses a fast, low-power interconnect architecture delivering deterministic 7 ns speed grade performance with very low quiescent current. The device supports I/O standards including LVTTL, LVCMOS (3.3V, 2.5V, 1.8V, 1.5V), SSTL, and HSTL on its 118 user I/O, with Schmitt-trigger inputs, hot-plugging capability, and optional input hysteresis for noise immunity. Technical depth: each macrocell contains a combinable/sum-of-products function block, and the Advanced Interconnect Matrix routes signals globally with predictable delays. Design entry and programming are performed in AMD/Xilinx ISE design tools; the non-volatile configuration survives power cycling and supports in-system programming (ISP) via the JTAG interface, enabling field updates of the logic design. Typical applications include bus interface bridging, address decoding, power-sequencing control, industrial control state machines, legacy processor support logic, and mobile/battery-powered systems where the CoolRunner-II low static power advantage directly extends battery life. Design consideration: because CoolRunner-II is a 1.8V-core device, observe the recommended power-up sequencing and use the dedicated VCCINT/VCCIO rails correctly; also apply Schmitt-trigger configuration on inputs driven from slow or noisy edges. This page adds value beyond the manufacturer datasheet by synthesizing distributor stock channels, drop-in same-family alternative part numbers, application guidance, and a parameter comparison table in one place.

詢價 聯絡我們
XC2C256-7TQ144I - CoolRunner-II CPLD 256MC TQFP-144 | AMD Xilinx
XC2C256-7TQ144I

XC2C256-7TQ144I - CoolRunner-II CPLD 256MC TQFP-144 | AMD Xilinx

The AMD (Xilinx) XC2C256-7TQ144I is a CoolRunner-II Complex Programmable Logic Device (CPLD) with 256 macrocells, 118 inputs and 118 outputs, a maximum clock frequency of 108 MHz, and a worst-case propagation delay of 6.7 ns, housed in a 144-pin TQFP (TQ144) package with an industrial temperature rating of -40C to +125C. A CPLD is a type of programmable logic device that sits between discrete SPLD devices (such as PAL/GAL/PALCE) and large FPGAs in the programmable-logic hierarchy. CPLDs provide deterministic, pin-to-pin timing, instant-on operation, and non-volatile configuration storage, which makes them the preferred glue-logic, bus-interface, and power-sequencing fabric in systems where an FPGA would be oversized or too slow to boot. The defining feature of the CoolRunner-II family is its ultra-low power architecture: unlike macrocell CPLDs built on high-power analog fast-switching technology, CoolRunner-II is fabricated on a 1.8 V core CMOS process that consumes orders of magnitude less static current. The -7 speed grade in this suffix denotes the 6.7 ns timing bin, and the trailing 'I' designates the industrial temperature range. The device integrates 256 macrocells organized into function blocks of 16 macrocells each, with a programmable interconnect matrix that ties all 118 I/Os to the internal fabric. Each macrocell supports combinational and registered modes, global three-state controls, and multiple clocking options. Design entry and compilation are performed with the AMD/Xilinx ISE toolchain. Typical applications include address decoding and bus interfacing in microprocessor systems, FPGA configuration management and power-sequencing control, protocol bridging and glue logic in industrial automation, handheld and portable equipment where CPLD power budget is critical, and legacy ASIC/ASSP replacement in medical and communication boards. When designing with this device, remember that the 1.8 V core is internally regulated while I/O banks operate at 1.5 V to 3.3 V; verify that VCCIO banking matches the interfacing voltage standard (LVCMOS levels) before finalizing PCB stack-up. This page consolidates distributor stock references, drop-in same-package alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet DS094.

詢價 聯絡我們
XC2C256-7TQG144C - 256-Macrocell 6.7 ns CPLD | AMD
XC2C256-7TQG144C

XC2C256-7TQG144C - 256-Macrocell 6.7 ns CPLD | AMD

The AMD XC2C256-7TQG144C is a CoolRunner-II complex programmable logic device with 256 macrocells, a 6.7 ns propagation delay, and 118 I/O pins in a 144-pin TQFP package. It provides approximately 6000 gates of logic for compact programmable control, interface, and signal-routing designs. A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that combines interconnected macrocells with programmable interconnect. In the broader hierarchy, a CPLD is a programmable logic device and an FPGA alternative. Unlike mask-programmed logic, a CPLD permits design changes without fabricating a new integrated circuit. The CoolRunner-II architecture also uses nonvolatile configuration storage, allowing the programmed logic to remain available after power is removed. The XC2C256 family provides 16 logic array blocks and 256 macrocells according to the available product data. Its -7 speed designation corresponds to the reported 6.7 ns propagation-delay class. With 118 user I/O pins, it supports parallel external interfaces and board-level control functions. The 1.7 V to 1.9 V internal supply range is suitable for systems designed around the device's documented core operating conditions. Typical uses include industrial control, communications equipment, portable electronics, programmable interface logic, bus arbitration, and compact control-plane functions. The CPLD can consolidate multiple fixed-function gates into one programmable device, reducing board area compared with a larger gate-array implementation when the required logic is modest. Designers should still verify timing, power, I/O standards, and pin constraints against the complete CoolRunner-II datasheet and their specific design. The principal design consideration is tool and configuration compatibility. Existing CoolRunner-II projects depend on supported AMD or Xilinx programming tools, device support, and verified bitstream compatibility. Before replacing an installed device, engineers must check the exact package, speed grade, temperature grade, power behavior, and pin assignment rather than relying only on the family name. This page consolidates the supplied distributor and manufacturer information, distinguishes verified facts from unavailable specifications, and adds selection and sourcing guidance. Because the provided data does not include a complete pin table, electrical limit table, or qualified replacement list, those fields remain explicitly marked for engineering review.

詢價 聯絡我們
XC2C256-7VQ100C - CoolRunner-II CPLD 256MC 1.8V | Xilinx
XC2C256-7VQ100C

XC2C256-7VQ100C - CoolRunner-II CPLD 256MC 1.8V | Xilinx

The Xilinx (AMD) XC2C256-7VQ100C is a CoolRunner-II Complex Programmable Logic Device (CPLD) with 256 macrocells, 6K system gates, a 7 ns pin-to-pin propagation delay, and 118 user I/O pins, housed in a 100-pin VQ100 thin-quad flat package (TQFP/VQFP) for commercial temperature operation. Fabricated in a 0.18 um CMOS process, it operates from a single 1.8 V core supply and supports internal clock frequencies up to 152 MHz. A CPLD (complex programmable logic device) is a class of programmable logic IC that sits between simple PAL/GAL devices and large FPGAs in the programmable-logic hierarchy. CPLDs use a deterministic, macrocell-based architecture that delivers fixed, predictable timing from input to output, making them the standard choice for glue logic, state machines, bus interfacing, power-sequencing control, and address decoding where every switching event has a known worst-case delay. The defining feature of the CoolRunner-II family is its extremely low power profile. Because the XC2C256 uses a 1.8 V core rather than the 3.3 V or 5 V rails of older CPLD generations, dynamic and static power consumption are dramatically reduced, which is why the family is widely used in battery-powered and thermally constrained systems. The device also supports ISE design tools and offers schmitt-trigger inputs, optional dual-DLL clocking resources, and flexible macrocell architecture for high logic utilization. With 256 macrocells and 118 user I/Os in a 0.5 mm-pitch 100-pin QFP, the XC2C256-7VQ100C provides one of the highest densities of the CoolRunner-II family in a surface-mount package that is easy to inspect and rework. The -7 speed grade denotes the 7 ns commercial-grade worst-case pin-to-pin delay; industrial (I-suffix) and Pb-free/green (VQG100) variants share the same die and footprint. Typical applications include embedded-system glue logic and bus bridging, microcontroller/FPGA boot and configuration control, industrial control panels, portable and battery-operated instruments, and communications line-card control functions. Anywhere a deterministic, non-volatile-configured logic device with near-zero standby power is required, this CPLD fits. Designers should confirm I/O bank voltage compatibility and use the Xilinx ISE toolchain for fitting; the same footprint accepts industrial and green variants, simplifying second-source within the family. This page adds engineering value beyond the datasheet: drop-in family alternatives, a parameter comparison table, practical design notes, application guidance, and sourcing information synthesized for procurement and design engineers.

詢價 聯絡我們
XC2C256-7VQ100I - CoolRunner-II CPLD 256 Macrocells | AMD Xilinx
XC2C256-7VQ100I

XC2C256-7VQ100I - CoolRunner-II CPLD 256 Macrocells | AMD Xilinx

The AMD Xilinx XC2C256-7VQ100I is a CoolRunner-II Complex Programmable Logic Device (CPLD) with 256 macrocells, a worst-case propagation delay of 6.7 ns, and system performance up to 152 MHz, housed in a 100-pin VQFP (VQ100, 14x14 mm) package and rated for the industrial temperature range. A CPLD (Complex Programmable Logic Device) is a class of programmable logic IC that sits between simple SPLDs such as GAL/PAL devices and full FPGAs in the programmable logic hierarchy. CPLDs implement user-defined combinational and sequential logic in a non-volatile, deterministic fabric: unlike SRAM FPGAs, a CoolRunner-II CPLD applies its configuration immediately at power-up with no configuration time or external configuration memory, which makes it a common glue-logic, bus-interface and power-up-control component in embedded systems. Key features of the XC2C256 include a 1.8 V core supply for very low static power, a real-time reprogrammable function block architecture with 256 macrocells, dual output banks that can switch to two independently selected output voltage levels, and Schmitt-trigger capable inputs for noisy board environments. The -7 speed grade delivers a 6.7 ns pin-to-pin delay, enabling deterministic timing in control-path logic. Architecturally, the CoolRunner-II family combines programmable function blocks with a low-power switching matrix. Each macrocell can be configured as combinational or registered logic, and the global routing matrix provides predictable, pin-to-pin timing across the device. Because the fabric is 1.8 V powered with I/O banks that support multiple standards, the device integrates cleanly into mixed-voltage boards. Typical applications include address decoding and bus interfacing in industrial controllers, power-up sequencing and reset control, handheld and battery-operated equipment where standby power matters, and bridging between processors and peripherals in communication hardware. Design consideration: budget the 1.8 V core rail separately from the I/O bank rails, and use the manufacturer datasheet pin-description table when assigning PCB tracks on the VQ100 footprint. This page synthesizes distributor availability, drop-in same-family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
XC2C32A-4CP56C - 32-Macrocell 450 MHz CPLD | AMD Xilinx
XC2C32A-4CP56C

XC2C32A-4CP56C - 32-Macrocell 450 MHz CPLD | AMD Xilinx

The AMD Xilinx XC2C32A-4CP56C is a 32-macrocell CoolRunner-II complex programmable logic device with a 450 MHz internal frequency, up to 33 user I/Os, and a 3.8 ns propagation delay. It is optimized for 1.8 V systems and supplied in a compact 56-pin CSPBGA package measuring 6 x 6 mm with a 0.50 mm ball pitch. These specifications make the CPLD suitable for space-constrained embedded systems requiring deterministic programmable logic, compact PCB routing, and low-power operation. A CPLD is a programmable logic device that combines multiple macrocells and programmable interconnect resources into a deterministic logic fabric. Its hierarchy is CPLD > complex programmable logic device > programmable logic device > programmable logic semiconductor. Unlike a soft-core processor or FPGA, a CPLD is generally configured from a stored bitstream and is selected when relatively modest logic density, predictable timing, low static power, and simple implementation are more important than very high programmable-resource counts. The XC2C32A-4CP56C provides 32 macrocells, 33 user I/Os, a 450 MHz internal frequency, and a 3.8 ns rated propagation delay. The device uses 0.18 µm CMOS technology, supports 1.8 V operation, and can reach 3.0 ns pin-to-pin logic delays. A reported quiescent current as low as 12 µA is particularly useful in portable or power-managed equipment where the logic remains active or intermittently enabled. The 56-pin CSPBGA package reduces board area relative to larger leaded or plastic packages, but its 0.50 mm pitch requires careful PCB layout, fine-pitch assembly, and appropriate land-pattern validation. Ball-level solder inspection and adequate thermal-via placement should be considered during hardware qualification. The commercial temperature designation indicated in the verified listings should also be checked against the complete ordering information and end-product environmental requirements. Typical uses include interface control, protocol bridging, data acquisition, industrial control, embedded glue logic, and general-purpose compact control systems. In each case, designers should verify I/O standard, timing, power rails, and pin assignment against the AMD DS310 datasheet before releasing a PCB or production design. The primary engineering trade-off is that the 56-ball footprint saves area but complicates assembly compared with a leaded package. Design for the specified 1.8 V supply, preserve the recommended decoupling and layout geometry, validate worst-case timing, and confirm programming-tool and device support before committing to production. This page consolidates verified device specifications, source links, package constraints, and practical CPLD-selection guidance. It also distinguishes directly evidenced drop-in information from substitutions that still require manufacturer pinout and timing verification.

詢價 聯絡我們
XC2C32A-4CPG56C - 32-Macrocell 200 MHz CPLD | AMD
XC2C32A-4CPG56C

XC2C32A-4CPG56C - 32-Macrocell 200 MHz CPLD | AMD

AMD XC2C32A-4CPG56C is a CoolRunner-II complex programmable logic device with 32 macrocells, 33 user I/Os, a 200 MHz internal frequency, and a 56-pin chip-scale BGA package. It uses 0.18 µm CMOS technology and is optimized for 1.8 V systems. The -4 speed grade supports operation to 200 MHz, while the listed propagation-delay range reaches 4 ns for applicable logic paths. A CPLD is a programmable digital-logic device that combines a logic architecture, nonvolatile configuration memory, and user-programmable I/O in one package. The CoolRunner-II family sits between simple programmable logic and larger FPGAs: it provides deterministic timing, in-system programmability, and a compact macrocell structure for consolidating Boolean equations, counters, decoders, state machines, and control logic. Within the semiconductor hierarchy, a CPLD is a programmable-logic IC and a user-programmable digital semiconductor. The XC2C32A offers 750 logic gates, 32 macrocells, and up to 33 user I/O pins. Its 0.18 µm CMOS implementation supports fast pin-to-pin logic delays, including a listed minimum of 3.8 ns, while the -4 device is rated at 200 MHz. Quiescent current is listed as low as 12 µA, making the device suitable for portable, low-power control systems as well as fixed industrial logic. The CSP-56 package has a 6 × 6 mm body and 0.50 mm ball pitch. The device is intended for in-system programmable logic and supports two I/O banks in the XC2C32A version. This bank structure allows interfaces to be grouped according to voltage requirements, provided each selected interface stays within the device's specified electrical limits. Its macrocell-based architecture is optimized for effective logic synthesis, making it practical to implement glue logic, bus decoding, protocol conversion, and system-control functions without a large FPGA. Typical applications include industrial control interfaces, communication protocol bridges, data-acquisition front ends, embedded system glue logic, and low-power portable electronics. It can also implement bus arbitration, address decoding, pulse-width modulation generation, status sequencing, and peripheral interfacing where deterministic behavior and a compact package are more important than very high logic capacity. Designers should use the AMD DS310 pin description and package drawing to assign every ball, including power, ground, configuration, and unused I/O connections. Decoupling and signal-routing guidance should follow the CoolRunner-II recommended PCB practices, while timing constraints must reflect the actual -4 speed grade, selected I/O standard, and external clock or interface conditions. This page organizes the key XC2C32A-4CPG56C specifications, package constraints, pin-compatible family alternatives, and application guidance into a compact engineering reference. It supports design partitioning, sourcing, and replacement planning while highlighting where device speed, package, and qualification requirements must be checked before a board is released.

詢價 聯絡我們
XC2C32A-4PC44C 32-Macrocell 4 ns CPLD | AMD/Xilinx
XC2C32A-4PC44C

XC2C32A-4PC44C 32-Macrocell 4 ns CPLD | AMD/Xilinx

The AMD/Xilinx XC2C32A-4PC44C is a CoolRunner-II complex programmable logic device with 32 macrocells, 750 logic gates, and a maximum operating frequency of 323 MHz. The -4 speed grade provides a 4 ns performance designation, while the commercial-temperature device is supplied in a 44-terminal PQCC surface-mount package measuring 16.5 mm by 16.5 mm with a 1.27 mm lead pitch. A complex programmable logic device, commonly called a CPLD, belongs to the programmable-logic hierarchy alongside FPGAs. Unlike a fixed combinational logic circuit, a CPLD stores its configuration in nonvolatile flash memory. After programming, the device implements digital logic directly in hardware, providing deterministic operation without executing software on a microcontroller or processor. The CoolRunner-II architecture combines 32 macrocells with 750 available gates in a low-power 0.18 µm process. Its in-system programmability permits a board to be configured or updated without removing the device from the assembled PCB. The commercial grade and surface-mount package are suited to industrial control, communications, consumer, and embedded equipment where compact configurable logic is required. Typical uses include bus-interface translation, control-signal generation, protocol bridging, state-machine implementation, display-control logic, and general glue logic around microcontrollers. The 32-macrocell capacity allows moderate combinational and sequential functions to be consolidated without introducing the resource overhead of a larger programmable-logic device. PCB design should preserve the manufacturer's recommended power, ground, configuration, and programming connections. Confirm the exact pin names and configuration requirements in the AMD/Xilinx CoolRunner-II documentation before routing the PCB, because the component combines user I/O with dedicated power and configuration functions. This page compares package and family variants, identifies genuine same-footprint replacements, and summarizes selection and implementation considerations that help engineers evaluate the XC2C32A-4PC44C beyond a basic distributor specification table.

詢價 聯絡我們
XC2C32A-4PCG44C - 32-Macrocell 323MHz CPLD | AMD Xilinx
XC2C32A-4PCG44C

XC2C32A-4PCG44C - 32-Macrocell 323MHz CPLD | AMD Xilinx

The AMD Xilinx XC2C32A-4PCG44C is a CoolRunner-II complex programmable logic device (CPLD) with 32 macrocells, 750 logic gates, a maximum stated operating frequency of 323 MHz, and a 44-pin PLCC package. The device is manufactured in 0.18 µm CMOS technology and supports a 1.8 V core supply. Its -4 suffix identifies a specific speed grade, while the PCG44C suffix identifies the commercial-temperature 44-lead PLCC configuration. The part combines deterministic nonvolatile configuration with fast combinational logic and extensive I/O support in a surface-mount-compatible package. A CPLD is a programmable semiconductor that sits between fixed-function logic and more complex FPGAs. Its architecture groups user logic into macrocells connected by a programmable interconnect. Because the configuration is stored in nonvolatile memory, the XC2C32A retains its logic after power is removed and requires no external configuration PROM. In the system hierarchy, a CPLD is a programmable-logic device, a digital integrated circuit, and a semiconductor component used to implement control, interface, decoding, and glue-logic functions. Key device characteristics include 32 macrocells, 750 gates, 323 MHz maximum operating frequency, 0.18 µm CMOS fabrication, and operation from a 1.8 V supply. The CoolRunner-II architecture provides nonvolatile configuration and fast propagation performance suited to compact control logic. The DS310 product specification also lists support for multiple LVCMOS and LVTTL input/output standards, including 1.5 V, 1.8 V, 2.5 V, and 3.3 V operating conditions described in that document. The XC2C32A implementation combines a relatively small logic array with numerous dedicated I/O pins. This balance makes it useful where a designer needs reliable timing closure, short routing paths, and a simple configuration workflow rather than the resource density of an FPGA. Its 44-lead PLCC outline supports compact board layouts, and its -4 speed grade provides a defined performance level for designs operating at or below the device's stated frequency ceiling. Typical applications include bus decoding and address multiplexing, peripheral interface control, industrial control and automation modules, firmware boot sequencing, display and keypad control, low-power embedded glue logic, and general-purpose prototyping platforms. The device is particularly suitable for designs in which nonvolatile configuration, moderate logic density, and rapid implementation are more valuable than large embedded processor or memory resources. When designing a PCB for this CPLD, verify every signal against the DS310 pin description table and confirm the voltage level of each I/O bank before connecting external circuitry. Provide a stable core supply with suitable decoupling, route sensitive clock and control nets away from noisy switching nodes, and use the manufacturer's programming and test recommendations. Legacy software and driver support should be validated before a new production design depends on the CoolRunner-II toolchain. This page combines device specifications, package identification, lifecycle guidance, drop-in replacement analysis, comparison tables, and practical board-level notes. It provides engineers with the information needed to determine whether the XC2C32A-4PCG44C fits an existing 44-pin PLCC footprint and how to evaluate equivalent speed-grade and temperature-grade options before committing a design to a legacy programmable-logic family.

詢價 聯絡我們
XC2C32A-4QFG32C - 32-Macrocell 1.8V CPLD | AMD | Logic Control
XC2C32A-4QFG32C

XC2C32A-4QFG32C - 32-Macrocell 1.8V CPLD | AMD | Logic Control

The AMD XC2C32A-4QFG32C is a CoolRunner-II complex programmable logic device with 32 macrocells, a 1.8 V core supply, a speed grade of -4, and a 32-pin QFN surface-mount package. Its 0.18 µm CMOS architecture supports logic densities up to 750 gates, while the device provides in-system programmability for compact control, interface, and glue-logic designs. A CPLD is a user-programmable digital logic device classified as a programmable logic semiconductor. In the product hierarchy, a CPLD sits below FPGA and above fixed-function logic. Unlike a mask-programmed device, it can be configured after manufacture, making it useful for prototypes, production controllers, bus adapters, signal conditioning, and legacy system integration. The CoolRunner-II architecture combines nonvolatile configuration storage with predictable interconnect timing. The XC2C32A family is optimized for 1.8 V systems and supports logic delays as fast as 3.0 ns, depending on the characterized path and loading conditions. The -4 designation identifies the device speed grade, while published comparison information lists an internal frequency of 323 MHz. Its architecture includes configurable output-pin functions such as slew-rate control, bus hold, pull-up, open-drain operation, and programmable grounds. Individual input pins may also use a Schmitt-trigger function for improved handling of slower or noisy signals. The 32-macrocell device provides a practical balance between logic density, pin count, and routing predictability. A comparison record identifies 750 gates, 32 macrocells, and 0.18 µm CMOS technology for the XC2C32A family. Its macrocell architecture supports registered outputs as well as direct-input register configurations, allowing output-state storage, pipelining, and state-machine implementation. Configuration retention and boundary behavior are managed through the CoolRunner-II feature set. Typical applications include compact peripheral controllers, bus interface logic, protocol converters, industrial control modules, instrumentation signal conditioning, and embedded system support logic. The in-system programming capability allows a board designer to configure the same physical CPLD for different hardware personalities, while the relatively small QFN-32 package supports compact boards where a larger FPGA would be unnecessary. The primary design constraint is the limited logic and I/O capacity of 32 macrocells. Engineers should reserve resources for configuration pins, dedicated inputs, power, ground, and board-level programming access. Signal-integrity planning should also account for the 1.8 V core environment and package routing density. Validate the final pin assignment, timing, and JTAG implementation against the AMD CoolRunner-II XC2C32A datasheet. This product overview combines the verified family specifications, package information, search-demand queries, and practical engineering guidance needed to evaluate the XC2C32A-4QFG32C. The comparison table also distinguishes documented speed-grade and package options, helping engineers identify a suitable drop-in device without confusing a pin-compatible change with an unqualified redesign.

詢價 聯絡我們
XC2C32A-4VQ44C - 32-Macrocell 1.8V CPLD | AMD | TQFP-44
XC2C32A-4VQ44C

XC2C32A-4VQ44C - 32-Macrocell 1.8V CPLD | AMD | TQFP-44

The AMD/Xilinx XC2C32A-4VQ44C is a CoolRunner-II complex programmable logic device with 32 macrocells, 750 equivalent gates, 33 user I/Os, and a 1.8 V supply in a 44-pin TQFP package. It combines a 450 MHz internal frequency with a listed 4 ns propagation delay, providing reconfigurable hardware for glue logic, control, decoding, and interface bridging. A CPLD is a user-programmable semiconductor that belongs to the programmable-logic hierarchy alongside FPGAs. Unlike a fixed combinational or sequential logic circuit, a CPLD allows logic assignments to be changed through programming. The CoolRunner-II architecture combines programmable logic with I/O resources, making the XC2C32A useful where deterministic short propagation delays, compact implementation, and nonvolatile configuration are important. Key features include 32 macrocells, 750 equivalent gates, 33 user I/O pins, 3.0 ns pin-to-pin logic delays, and low quiescent current as low as 12 uA. The -4 speed designation identifies the manufacturer's speed grade, while the C suffix identifies the stated commercial operating-temperature variant. The device uses 0.18 um CMOS technology and is optimized for 1.8 V systems. The XC2C32A architecture is intended for designs requiring moderate logic density rather than FPGA-scale processing. Its macrocell-based structure can support control logic, state machines, bus decoding, address decoding, and protocol interface glue. Available operating specifications include a 6 x 6 mm package body, 0.50 mm pitch, and 44 pins, although the complete physical package drawing is identified by conflicting secondary listings. Typical applications include industrial control and automation, embedded system support logic, communication-interface glue, legacy peripheral interconnection, and compact programmable control modules. The 33 user I/Os allow the device to connect external sensors, memory interfaces, status indicators, and peripheral control signals while keeping the design compact. Designers should verify the exact pinout, I/O standards, power requirements, configuration interface, and timing constraints in AMD document DS310 before layout. Because secondary sources disagree on whether the physical package is a 44-pin TQFP or a 56-contact CSP representation, the manufacturer pinout drawing is the controlling reference. Do not substitute a similarly named XC2C32A speed grade without reviewing its timing grade and temperature suffix. This page combines verified manufacturer and distributor information with price references as of 2026-10-28, same-family drop-in candidates, comparison parameters, and practical selection guidance. It also distinguishes directly supported facts from specification fields that require confirmation from the manufacturer datasheet.

詢價 聯絡我們
XC2C32A-4VQG44C - 32-Macrocell 1.8V CPLD | AMD Xilinx
XC2C32A-4VQG44C

XC2C32A-4VQG44C - 32-Macrocell 1.8V CPLD | AMD Xilinx

The AMD Xilinx XC2C32A-4VQG44C is a CoolRunner-II complex programmable logic device (CPLD) built around 32 macrocells and 33 user I/O pins. It is specified for 1.8V systems, uses CMOS programmable logic technology, and is packaged in a 44-pin VQFP-style package. The -4 speed grade is identified in the family documentation with approximately 3.8 ns propagation delay, while one product listing identifies an internal frequency of 450 MHz and an operating temperature range extending to 125 °C. The device is intended for deterministic glue logic, bus interfacing, control logic, signal conditioning, and low-power embedded systems. A CPLD is a programmable logic device that combines multiple macrocell logic sections into one reconfigurable integrated circuit. Unlike a mask-programmed fixed-function logic device, a CPLD can be programmed after manufacture, allowing designers to implement control, decoding, multiplexing, and interface functions in a compact device. The CoolRunner-II family combines a CMOS CPLD architecture with low-power operation and in-system programmability, making it useful for designs that require flexible logic without the resource complexity of a large FPGA. The XC2C32A provides 32 macrocells, approximately 750 logic gates according to the family comparison information, and 33 user I/Os. Its listed features include in-system programmability, hot-pluggable PLA architecture, and high pinout retention. The device is optimized for 1.8V systems and is described as offering pin-to-pin replacement compatibility with earlier XC2C32 devices when used with the appropriate AMD Xilinx cross-reference information. These characteristics make it useful for legacy and modernization designs where maintaining the existing board footprint is important. The -4 suffix identifies the performance grade of this device, while VQG44C identifies the package and temperature-related ordering configuration. The package information reported for the target varies between distributor and catalog pages, with 44-pin VQFP notation used for the target and a separate catalog entry describing a 56-pin CSP configuration. Engineers should therefore confirm the mechanical drawing and pin assignment against the exact package suffix before releasing a PCB footprint. The CPLD is not a power semiconductor, so a safe-operating-area chart is not applicable. Typical applications include bus arbitration, address decoding, control-signal generation, peripheral interfacing, industrial control boards, and compact embedded control systems. The 33 user I/Os can be assigned to digital inputs and outputs, while the programmable macrocells implement Boolean equations, counters, state machines, and registered logic. The 1.8V operating focus helps reduce power consumption in systems where the CPLD interfaces with modern low-voltage processors, transceivers, and memory components. Design planning should begin with the pin assignment table and the CoolRunner-II device documentation. Confirm that the selected package has the required power, ground, configuration, clock, and user I/O assignments, and use the exact package suffix to select the correct PCB land pattern. Designers should also account for the programmable logic and I/O limitations of the 32-macrocell device rather than assuming FPGA-scale resources. This page consolidates the part identity, package caveats, documented family characteristics, replacement guidance, and practical design considerations into an engineering-focused component reference.

詢價 聯絡我們
XC2C32A-6CP56C - 32-Macrocell 200MHz CPLD | Xilinx
XC2C32A-6CP56C

XC2C32A-6CP56C - 32-Macrocell 200MHz CPLD | Xilinx

Xilinx XC2C32A-6CP56C is a CoolRunner-II complex programmable logic device with 750 logic gates, 32 macrocells, 33 user I/O pins, and a maximum operating frequency of 200 MHz. It is built with 0.18 µm CMOS technology, optimized for 1.8 V systems, and supplied in a 56-ball CSP package measuring 6 x 6 mm with 0.50 mm pitch. The -6 speed designation corresponds to a listed propagation delay of 4 ns in the verified distributor specifications. A CPLD is a programmable logic device that combines nonvolatile configuration memory, programmable AND logic, and programmable OR interconnect. Within the broader semiconductor hierarchy, a CPLD is a user-programmable digital IC, complementing FPGA and ASIC technologies. The XC2C32A belongs to the CoolRunner-II family and provides deterministic logic implementation for glue logic, control, decoding, state-machine, and interface-adaptation circuits. Key device characteristics include 32 macrocells, 750 gates, 33 user I/O pins, and two logic array blocks. The verified data also reports a 4 ns propagation delay, an internal frequency of 450 MHz, CMOS logic-family construction, and a 0.18 µm CMOS process. A pin-to-pin delay as low as 3.0 ns is also listed in the component feature summary, while quiescent current is reported as low as 12 µA. The device architecture combines configurable logic with low-power 1.8 V operation. Its 32 macrocells provide moderate logic density for compact control logic rather than high-volume parallel processing. The reported 450 MHz internal frequency should not be confused with the 200 MHz maximum device operating frequency: the latter is the more conservative figure presented in the verified component specifications and is the appropriate basis for initial timing design. Typical uses include boot and power sequencing, peripheral interfacing, protocol and address decoding, industrial control logic, test-equipment control, and low-power embedded system support. The 33 user I/O pins make it useful for designs requiring moderate pin density without moving to a larger programmable-logic package. Its 56-ball CSP footprint also supports compact surface-mount assemblies when PCB-routing and assembly-process requirements are carefully observed. The primary design consideration is timing closure at the system level. Engineers should use the official AMD DS310 datasheet for pinout, bank voltage, AC timing, configuration, and absolute-maximum ratings because those details are not present in the supplied distributor excerpts. A 4 ns propagation delay supports timing-critical glue logic, but external setup, hold, skew, and routing margins still determine whether the complete interface meets its target clock. This page consolidates the verified distributor specifications, package information, sourcing data, and same-family drop-in alternatives. It also distinguishes the device's core architecture from cross-brand CPLD families that may be functionally comparable but cannot be treated as pin-compatible without an independent footprint and electrical verification.

詢價 聯絡我們
XC2C32A-6CPG56C - 32-Macrocell 1.8V CPLD | AMD Xilinx
XC2C32A-6CPG56C

XC2C32A-6CPG56C - 32-Macrocell 1.8V CPLD | AMD Xilinx

AMD Xilinx XC2C32A-6CPG56C is a CoolRunner-II complex programmable logic device with 32 macrocells, 33 user I/O, and a 6 ns speed grade. It uses 0.18 µm CMOS technology, supports optimized 1.8 V systems, and is housed in a 56-pin 6 × 6 mm CSBGA package with a 0.50 mm pitch. The device is designed for compact, low-power logic implementation where nonvolatile configuration, fast routing, and deterministic in-system operation are valuable. A CPLD, or complex programmable logic device, is a programmable semiconductor positioned between basic programmable logic arrays and FPGAs. Its interconnected macrocells combine combinational and registered logic functions, while embedded configuration memory determines the device behavior after power-up. Within the semiconductor hierarchy, the XC2C32A belongs to the CPLD family, the programmable-logic category, and ultimately the broader integrated-circuit and semiconductor markets. Principal features include 32 macrocells, approximately 750 equivalent logic gates, 33 user I/O, and a fast 6 ns device designation. The CoolRunner-II architecture supports 1.8 V operation and LVCMOS interfaces at 3.3 V, 2.5 V, and 1.8 V when electrical conditions permit. Its low quiescent current, reported as low as 12 µA, is valuable in portable and power-constrained equipment. The two-bank I/O organization also provides flexibility for interface partitioning and level-compatible system connections. The CSBGA package measures 6 × 6 mm and uses a 0.50 mm pitch, making it substantially more compact than leaded or larger plastic packages. This fine-pitch land pattern requires careful PCB layout, exact ball-to-pad geometry, and assembly-process control. Although the package offers high connection density, thermal behavior and solder-joint reliability must be evaluated against local power dissipation and the board's copper and thermal via structure. Typical applications include compact interface controllers, display and peripheral glue logic, industrial control sequencers, low-power embedded systems, and portable equipment. The combination of 32 macrocells and 33 I/O is well suited to consolidating control logic around a processor or microcontroller while avoiding the resource overhead of a larger FPGA. The device can also implement bus arbitration, state machines, protocol conversion, and asynchronous interface bridging. When designing around the XC2C32A-6CPG56C, confirm the exact ball assignments, voltage requirements, and I/O-standard constraints in AMD DS310 before fabrication. Keep sensitive traces short, provide the required configuration and control paths, and validate the PCB assembly process because the 0.50 mm CSBGA geometry offers limited tolerance for registration and solder defects. This product record combines package, logic-capacity, interface, lifecycle, and replacement information with practical guidance for schematic capture, high-density PCB layout, and CPLD implementation. It is intended to help engineers determine whether the 56-pin CoolRunner-II device fits a design before beginning board layout or production planning.

詢價 聯絡我們