產品(44,000+)

XC7Z010-1CLG400C - 667MHz Zynq SoC, 28K Logic | AMD
XC7Z010-1CLG400C

XC7Z010-1CLG400C - 667MHz Zynq SoC, 28K Logic | AMD

The AMD XC7Z010-1CLG400C is a Zynq-7000 All Programmable System on Chip integrating a dual-core Arm Cortex-A9 processor, 667 MHz processor operation, and 28,000 FPGA logic cells in a 400-CSBGA package measuring 17 mm by 17 mm. It combines programmable hardware with software-controlled processing for embedded systems, industrial control, communications, image processing, and hardware-accelerated applications. The device also provides 35,200 registers, 240 Kbit of block RAM, 80 multipliers, 60 block RAM resources, 80 dedicated DSP slices, and up to 128 user I/Os, according to the supplied technical data. What is a Zynq-7000 All Programmable SoC? A system on chip, or SoC, combines multiple functional subsystems into one integrated semiconductor. In this case, the XC7Z010-1CLG400C integrates an Arm Cortex-A9 MPCore processing system with CoreSight debug support and Artix-7 FPGA logic. This hierarchical relationship places the device between a conventional microprocessor and a programmable-logic accelerator, allowing software tasks and parallel hardware pipelines to share one package. The principal features are the dual Arm Cortex-A9 cores, 667 MHz operation, and 28K programmable logic cells. The supplied data also identifies 240 Kbit of RAM, 80 multipliers, 60 block RAMs, 80 dedicated DSP slices, two Ethernet MACs, and support for differential I/O standards including LVDS, SSTL, and HSTL. These resources make the device suitable for systems that need deterministic hardware pipelines alongside general-purpose software. The FPGA fabric provides programmable parallel logic for acquisition, filtering, protocol conversion, video processing, and cryptographic workloads. The processor subsystem supports software applications and operating-system-based control, while the DSP, block RAM, and Ethernet resources can accelerate data-intensive operations without requiring separate programmable-logic devices. The 400-CSBGA package exposes up to 128 user I/Os for board-level connectivity. Typical uses include industrial factory controllers, networked embedded gateways, camera and image-processing systems, communications equipment, data-acquisition platforms, and compact control systems. The integrated architecture can reduce the number of external chips when software control and FPGA acceleration are both required. The 667 MHz processor and parallel fabric provide a flexible split between sequential software processing and hardware pipelines. Designers should verify power sequencing, signal-integrity requirements, differential I/O implementation, thermal conditions, and the complete pinout against the AMD documentation. The supplied data does not provide a manufacturer datasheet URL, exact voltage limits, operating-temperature range, or detailed package dimensions, so those values are not inferred here. This product data consolidates verified distributor and comparison information with practical selection context, package identity, core architecture, programmable resources, and application guidance for engineers evaluating the XC7Z010-1CLG400C.

詢價 聯絡我們
XC7Z010-2CLG400E - Dual-Core Zynq SoC, 766MHz | AMD
XC7Z010-2CLG400E

XC7Z010-2CLG400E - Dual-Core Zynq SoC, 766MHz | AMD

AMD XC7Z010-2CLG400E is a Zynq-7000 system-on-chip integrating a dual-core ARM Cortex-A9 MPCore processor with CoreSight debug capability and 28,000 Artix-7 FPGA logic cells. The processor operates at 766 MHz, and the device is packaged in a 400-CSPBGA package measuring 17 x 17 mm. It provides a compact platform for combining Linux-based software control with hardware-accelerated programmable logic. A Zynq system-on-chip belongs to the FPGA & CPLD category and integrates a hard processor system with programmable logic. Unlike a separate microcontroller and FPGA, this architecture allows software and hardware functions to exchange data through dedicated interfaces without requiring an external processor-to-FPGA bus. The XC7Z010 also includes 130 I/O, making it appropriate for embedded control, data acquisition, communications, and industrial equipment requiring both firmware execution and hardware timing. The key features of the XC7Z010-2CLG400E are its 766 MHz dual-core ARM Cortex-A9 processor, 28,000 programmable logic cells, CoreSight debug support, and integration in the 400-CSPBGA package. The processor operates from 1.2 V and 3.3 V according to the component listing, while the snippet identifies the device as a Zynq-7000 SoC with Artix-7 FPGA resources. These characteristics support deterministic hardware functions operating alongside a conventional embedded-software stack. The device architecture combines an ARM MPCore processing subsystem with Artix-7 programmable logic. Firmware can control processors, peripherals, memory, and external interfaces, while programmable logic can implement parallel data paths, protocol handling, filters, or accelerator functions. The integrated SoC arrangement reduces component count and board complexity, but the system still requires careful partitioning between hard-processor peripherals and fabric logic to avoid inefficient arbitration or timing bottlenecks. Typical applications include industrial control gateways, camera and image-processing modules, networked embedded systems, sensor acquisition equipment, and communications infrastructure. A camera module can place pixel formatting or interface logic in the FPGA fabric while the ARM cores manage control protocols. An industrial gateway can run operating-system software while programmable logic accelerates packet handling or deterministic data acquisition. The 400-CSPBGA package requires careful PCB layout, power-plane planning, via assignment, and thermal design. Use the AMD package pinout files and UG865 when assigning every ball, and follow the Zynq-7000 power, decoupling, and configuration requirements in the manufacturer documentation. Differential pairs and high-speed memory or interface routes need controlled length, return paths, and reference-plane continuity. This product page combines the device identity, package information, family alternatives, application guidance, comparison parameters, and practical design considerations into one engineering reference for evaluating the XC7Z010-2CLG400E.

詢價 聯絡我們
XC7Z010-2CLG400I Dual Cortex-A9 Zynq SoC | AMD
XC7Z010-2CLG400I

XC7Z010-2CLG400I Dual Cortex-A9 Zynq SoC | AMD

AMD XC7Z010-2CLG400I is a Zynq-7000 adaptive system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor with an Artix-7 FPGA fabric in a 400-CSPBGA package measuring 17 x 17 mm. The device provides 28K FPGA logic cells, operates with a listed processor frequency of 766 MHz, and integrates CoreSight debug support. Its combination of hard processor, programmable logic, and high-speed serial connectivity makes it suited to embedded control, industrial automation, communications, image processing, and edge systems. A Zynq SoC is an FPGA & CPLD with an embedded ARM processing system. The programmable-logic section implements custom hardware, parallel interfaces, accelerators, or signal-processing pipelines, while the ARM Cortex-A9 subsystem executes operating-system code and controls those functions. In the broader semiconductor hierarchy, the XC7Z010 belongs to the FPGA & CPLD category and extends the functionality of a conventional FPGA through heterogeneous processing integration. The primary advertised features include a dual ARM Cortex-A9 MPCore processor, CoreSight technology, 28K logic cells, a 766 MHz operating frequency, and a compact 400-CSPBGA package. The industrial-temperature suffix identifies this ordering option for applications requiring an extended operating-temperature grade. Its 17 x 17 mm ball-grid-array package also supports dense PCB integration while exposing the processor, programmable logic, memory interfaces, and I/O resources in one device. Technically, the processor and FPGA fabric are functionally coupled but not automatically accelerated by hardware. A design can partition tasks between software running on the ARM subsystem and parallel logic implemented in the Artix-7 fabric, then use shared memory or high-speed interfaces for data exchange. Designers must plan clocking, memory, power, and signal-integrity constraints before implementation. The FPGA part also requires equivalent-device-aware Vivado configuration and suitable design constraints for the selected speed and temperature grade. Typical applications include industrial controllers, programmable logic automation, embedded vision, sensor fusion, network appliances, and low-latency edge processing. For vision, the programmable fabric can accelerate deterministic image-processing stages while the processor handles control logic and external networking. For industrial equipment, hardware peripherals can be placed close to the processing engine to reduce serial-interface overhead. The same integration also supports programmable radio, test, and measurement modules when several interfaces must share a common board area. The principal design consideration is package complexity. A 400-CSPBGA assembly requires a fine-pitch, multilayer PCB, careful escape routing, controlled-impedance interfaces, and assembly processes capable of handling the full ball array. Power and thermal design should be completed early because processor activity, FPGA utilization, DDR memory, and high-speed I/O can make board-level performance dependent on more than nominal device speed. This page organizes the device's core electrical identity, package details, ordering alternatives, application guidance, migration considerations, and PCB implementation notes into one engineering-focused reference. It also distinguishes true package-compatible ordering alternatives from larger Zynq devices that require additional design review rather than treating them as unconditional drop-in replacements.

詢價 聯絡我們
XC7Z010-3CLG225E - 866MHz Dual Cortex-A9 SoC | AMD
XC7Z010-3CLG225E

XC7Z010-3CLG225E - 866MHz Dual Cortex-A9 SoC | AMD

AMD XC7Z010-3CLG225E is a Zynq-7000 programmable system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with 28K Artix-7 FPGA logic cells, an 866 MHz processor rating, and CoreSight debug support in a 225-CSPBGA package measuring 13 x 13 mm. It integrates programmable logic, hard processors, memory controllers, and programmable I/O in one device. A Zynq-7000 SoC is a heterogeneous programmable-logic device combining an FPGA fabric with one or more Arm processor cores. In the product hierarchy, XC7Z010-3CLG225E is a Zynq-7000 system-on-chip, an FPGA & CPLD integrated circuit, and a semiconductor platform suitable for embedded control, industrial automation, communications, image processing, and general-purpose edge systems. The device provides 28,000 logic cells and a dual-core Arm Cortex-A9 configuration at up to 866 MHz. Its 225-CSPBGA package supports a compact board layout, while the -3 speed grade targets higher operating performance than the lower-speed Zynq-7000 options. The CLG225 device also provides four external ADC signal pairs, as described in AMD documentation for the 7z010 CLG225 family. AMD DS187 covers XC7Z010 and its related Zynq-7000 devices, including DC and AC switching characteristics. The listed 28 nm fabrication technology and 1 V core-side operating designation identify the device as a programmable logic and embedded-processing platform rather than a conventional standalone microprocessor. Its architecture allows software running on the Arm cores to control FPGA fabric for parallel datapaths, hardware acceleration, interface adaptation, and deterministic real-time processing. Typical applications include industrial control gateways, networked embedded systems, video and image-processing subsystems, communications equipment, test and measurement platforms, and programmable sensor nodes. The dual-core processor supports concurrent software workloads, while the FPGA fabric can accelerate data movement or implement custom peripherals without adding a separate FPGA to the board. PCB design must follow the AMD Zynq-7000 CLG225 package and pinout documentation, including ball assignments, power rails, decoupling, clocking, and high-speed routing requirements. Designers should also account for programming, boot configuration, thermal performance, and the relationship between the 866 MHz processor rating and the power required by the selected power-management design. This product record combines the device architecture, package details, practical application guidance, and speed-grade comparison in one place. It helps engineers distinguish the -3 CLG225 device from lower-speed variants and evaluate whether the integrated processor-FPGA architecture fits a specific embedded design before beginning schematic capture and PCB layout.

詢價 聯絡我們
XC7Z010-3CLG400E - 866MHz Zynq SoC with 28K Logic Cells
XC7Z010-3CLG400E

XC7Z010-3CLG400E - 866MHz Zynq SoC with 28K Logic Cells

The AMD XC7Z010-3CLG400E is a Zynq-7000 Artix-7 system-on-chip that combines a dual-core Arm Cortex-A9 MPCore processing system with 28K programmable logic cells. The device operates at up to 866 MHz and is supplied in a 400-CSPBGA package measuring 17 mm by 17 mm. Its integrated architecture allows control software, ARM Cortex-A9 processing, programmable logic, and dedicated I/O resources to operate within one device. A Zynq system-on-chip is an FPGA and processor integration. The processor subsystem handles operating-system software, networking, control functions, and general-purpose applications, while the programmable-logic subsystem implements custom hardware, accelerators, interfaces, and real-time datapaths. The XC7Z010 belongs to the Zynq-7000 hierarchy, combining an Arm Cortex-A9 microprocessor system with Artix-7 programmable logic and CoreSight debug capabilities in one semiconductor package. The XC7Z010-3CLG400E provides 28K logic cells, an 866 MHz maximum processor frequency, and a 400-CSPBGA package. Its integrated design reduces the number of discrete components needed for a processor-plus-FPGA system and permits direct communication between the processing system and programmable logic. This architecture is particularly useful when software must coordinate hardware, when deterministic logic must coexist with a general-purpose processor, or when product updates need both programmable software and configurable hardware. The -3 ordering code identifies the device speed grade, while CLG400 identifies the 400-ball chip-scale BGA package and E identifies the commercial temperature option. Because the package integrates hundreds of power, ground, signal, and configuration connections, the PCB must follow the AMD package guidelines, including controlled BGA pad geometry, appropriate escape routing, and properly designed power and ground planes. Typical implementations include industrial control gateways, camera and vision systems, programmable-logic test equipment, embedded Linux products, industrial Ethernet equipment, and low-latency signal-processing platforms. In these systems, the Arm Cortex-A9 processors can run control software while programmable logic handles deterministic acquisition, protocol conversion, filtering, or interface tasks. For a new design, follow the AMD Zynq-7000 data sheet, package pinout files, PCB design guidance, and Vivado implementation rules. Pay particular attention to supply rails, decoupling, BGA assembly, clocking, configuration boot sources, and memory-interface layout. Existing boards must also be reviewed for speed-grade, temperature-grade, timing, and software qualification changes before substitution. This product page consolidates the Zynq-7000 SoC specifications, package information, same-footprint alternatives, application guidance, and design considerations into one engineering-oriented reference for FPGA, embedded, and hardware-design teams.

詢價 聯絡我們
XC7Z015-1CL485I - 74K Zynq SoC FPGA 667MHz | AMD
XC7Z015-1CL485I

XC7Z015-1CL485I - 74K Zynq SoC FPGA 667MHz | AMD

The AMD XC7Z015-1CL485I is a Zynq-7000 system-on-chip FPGA combining a dual-core Arm Cortex-A9 processor with 74K Artix-7 FPGA logic cells in a 484-CSPBGA package operating at 667 MHz. It integrates programmable logic, dual-core Arm processing, memory interfaces, and high-speed connectivity for embedded control, industrial automation, communications, and edge-processing systems. The verified distributor description identifies the device as a system-on-chip with dual Arm Cortex-A9 MPCore and CoreSight technology. A Zynq-7000 SoC FPGA is more than a conventional FPGA: it combines a hard processor subsystem with programmable logic in one device. This heterogeneous architecture allows software tasks to run on the Arm processor while dedicated hardware accelerates parallel logic, interface, signal-processing, or control functions. The XC7Z015-1CL485I belongs to the Zynq-7000 family and is identified by the 74K logic-cell configuration. Key verified characteristics include dual Arm Cortex-A9 MPCore processing, CoreSight debug support, 74K FPGA logic cells, 667 MHz operation, and a 484-CSPBGA package measuring 19 x 19 mm. These attributes make the part suitable for embedded systems that need both sequential software execution and programmable hardware. Its integrated architecture can reduce external component count compared with separate processor and FPGA implementations. The device is supplied under the exact ordering code XC7Z015-1CL485I. The verified distributor records show product availability, pricing, inventory, and SoC FPGA descriptions, while the exact electrical limits, temperature ratings, memory interfaces, I/O standards, and power characteristics are not provided in the supplied data. Engineers should therefore verify the complete manufacturer datasheet and package pinout before finalizing a design. Typical applications include industrial factory control, network-connected embedded systems, camera and image-processing front ends, robotics, communications equipment, and low-power edge computing. The processor subsystem is suitable for control software, networking stacks, and operating-system support, while the programmable fabric handles parallel datapaths, interfaces, or accelerators. A critical design consideration is the dense BGA package and its many power, ground, and high-speed pins. PCB layout, decoupling, bank voltage planning, signal integrity, and thermal management must be developed against the official package information. This page summarizes verified distributor information and identifies parameters requiring manufacturer-data confirmation before release to fabrication. This page combines exact distributor metadata, application guidance, package considerations, and sourcing information intended to help engineers evaluate XC7Z015-1CL485I efficiently while avoiding unsupported technical assumptions.

詢價 聯絡我們
XC7Z015-1CLG485C - 667MHz Zynq-7000 SoC | AMD
XC7Z015-1CLG485C

XC7Z015-1CLG485C - 667MHz Zynq-7000 SoC | AMD

The AMD XC7Z015-1CLG485C is a Zynq-7000 adaptive SoC combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric in a 485-CSPBGA package. It operates at 667 MHz, provides 74K FPGA logic cells, and integrates 130 PS I/O with 150 programmable FPGA I/O. The device is designed for embedded systems that require programmable hardware acceleration alongside a coherent Arm-based software environment. A Zynq-7000 adaptive SoC is a heterogeneous system-on-chip that places an Arm processor system and FPGA fabric in one package. The processor subsystem supports Linux and standalone applications, while the FPGA fabric implements parallel data paths, custom interfaces, accelerators, and time-critical control logic. This integration reduces interconnects between the processor and programmable logic compared with a two-chip architecture while preserving the flexibility of FPGA-based hardware. The XC7Z015 combines two Arm Cortex-A9 MPCore processors with CoreSight debug support and 74K Artix-7 logic cells. Its 667 MHz processor rating supports operating-system-based control, communications management, and application processing. The 150 FPGA I/O expand interface options for external memory, networking, industrial interfaces, image acquisition, and embedded peripherals. The integrated processor, memory interfaces, fabric, and I/O make the device suitable for compact embedded platforms where board area and system integration are priorities. The CLG485 package uses a 19 mm by 19 mm CSP-BGA format and places 485 signal or power positions beneath the device. A 1.05 V supply rating is identified for the processor core, although the complete power architecture requires multiple rails and strict sequencing. The commercial-grade part is specified from 0°C to 85°C, making it appropriate for temperature-controlled industrial, communications, instrumentation, and test equipment rather than uncased automotive or extreme-temperature installations. Typical applications include industrial control gateways, machine vision, communications infrastructure, test and measurement systems, embedded servers, and network appliances. In each case, the processor can run control-plane software while FPGA logic accelerates data movement, protocol handling, filtering, encryption, or sensor acquisition. The heterogeneous architecture is especially useful when deterministic parallel behavior and conventional operating-system support are both required. Design work should begin with the AMD Zynq-7000 technical reference material and the CLG485 package placement diagram. Confirm every power rail, decoupling requirement, configuration interface, memory topology, and pin multiplexing decision against the manufacturer documentation. The 19 mm by 19 mm BGA also requires careful escape-routing planning, inspection access, and substrate-aware thermal design. This product page consolidates the confirmed device identity, package information, operating limits, engineering use cases, compatible device variants, and selection considerations into one design-oriented reference for engineers evaluating the XC7Z015-1CLG485C.

詢價 聯絡我們
XC7Z015-1CLG485I - 667MHz Dual-Core Zynq SoC | AMD
XC7Z015-1CLG485I

XC7Z015-1CLG485I - 667MHz Dual-Core Zynq SoC | AMD

The AMD XC7Z015-1CLG485I is a Zynq-7000 Artix-7 FPGA system on chip with two 667MHz ARM Cortex-A9 MPCore processors, CoreSight debug capability, 74K logic cells, and a 485-CSPBGA package measuring 19 mm by 19 mm. It combines programmable FPGA fabric with a dedicated dual-core processing system in one device. A Zynq-7000 SoC is an FPGA and programmable system-on-chip architecture that integrates FPGA logic with a hard-processor subsystem. The FPGA fabric supports parallel hardware processing, while the ARM Cortex-A9 subsystem supports operating systems, networking, control functions, and application software. This hierarchy places the XC7Z015 within the FPGA and SoC family and makes it useful where designers need both software flexibility and hardware-level performance. The principal device characteristics are two Cortex-A9 MPCore processors operating at 667MHz, 74K FPGA logic cells, CoreSight debug support, and a 485-CSPBGA package. The -1 speed designation identifies the device performance grade, while CLG485 identifies the 485-ball package. Industrial-temperature and extended-temperature behavior should be confirmed against the exact ordering code and AMD documentation before deployment. Architecturally, the XC7Z015 separates processor-side and programmable-logic functions while allowing designers to exchange information through high-bandwidth interfaces. Parallel accelerator logic can execute filtering, encryption, video processing, or interface conversion at deterministic rates, while the processor subsystem controls data flow and operating-system functions. CoreSight provides integrated visibility for processor-based debugging and trace-oriented development workflows. Typical uses include industrial machine vision, networked industrial control, communications equipment, high-performance embedded processing, and FPGA-assisted data acquisition. The dual-core processor configuration can support partitioning between an operating system and control tasks, while the 74K logic cells can accelerate parallel datapaths without requiring a separate FPGA. Software-defined controls, protocol conversion, and sensor fusion are additional suitable workloads. Board design requires careful attention to the 19 mm by 19 mm BGA escape routing, power sequencing, decoupling, and thermal performance. Use AMD package files and the Zynq-7000 package pinout resources when assigning power, ground, high-speed memory, and I/O pins. Differential and high-speed interfaces should be routed with controlled impedance and verified against the relevant Zynq-7000 guidance. This product page combines exact catalog identifiers, device architecture, package details, qualification alternatives, comparison data, and implementation guidance. It also organizes replacement and selection questions around the constraints that determine whether a candidate is genuinely usable on the same PCB.

詢價 聯絡我們
XC7Z015-2CL485I - Zynq-7000 SoC, Dual Cortex-A9, 74K Logic Cells | AMD
XC7Z015-2CL485I

XC7Z015-2CL485I - Zynq-7000 SoC, Dual Cortex-A9, 74K Logic Cells | AMD

The AMD XC7Z015-2CL485I is a Zynq-7000 All Programmable SoC integrating a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug and 74K Artix-7 FPGA logic cells, housed in a 484-pin CSPBGA (19x19 mm) package. According to AMD/Xilinx product pages, the device runs at up to 766 MHz on the application processor side and combines hard-core peripherals (DDR controller, USB, Gigabit Ethernet, SD/SDIO, CAN, SPI, I2C, UART) with 74K logic cells, 46,200 LUTs and ~3.5 Mb of block RAM in the programmable logic. The XC7Z015-2CL485I is part of the Z-7015 speed/temperature family (industrial, 766 MHz). It targets embedded designs that need deterministic ARM processing alongside custom RTL acceleration, without external CPU + FPGA partitioning. An SoC (System on Chip) is an integrated circuit that consolidates a microprocessor, memory, peripherals, and often programmable logic into a single die. In the Zynq-7000 family the terminology hierarchy is: SoC > All-Programmable SoC > ARM + FPGA heterogeneous device > Zynq-7000 series > Zynq-7015 sub-family. The 7000S class in the same generation uses a single-core Cortex-A9, whereas Z-7015/7030/7045/7100 parts are dual-core; the XC7Z015 sits at the low end of the dual-core Zynq-7000 family with 74K logic cells, while the XC7Z030/045/100 scale up to 125K-444K cells. Key features include a hard DDR3/DDR3L memory controller with ECC support, two ARM Cortex-A9 cores with NEON extensions and Floating Point Unit, and 95 user I/O pins (the constraint in the 484-CSPBGA package). Programmable logic resources include 74K logic cells (Artix-7 fabric), ~3.5 Mb of block RAM, and 220 DSP slices. Built-in peripherals include two Gigabit Ethernet MACs, two USB 2.0 OTG ports, two CAN 2.0B controllers, two I2C, two SPI, two UART, two SD/SDIO, and GPIO. The 484-CSPBGA (19x19 mm) industrial-grade package supports operation from -40C to +100C and uses a Cavity-Lead BGA construction with flip-chip silicon for improved thermal performance. A common design pitfall is the chip-density distinction: -2 is the standard speed grade while -3 is the high-performance grade. Both share identical pinout and may co-exist on the same PCB; some logic timing paths fail closure at -2 that succeed at -3, so designs targeting the Zynq PS at 766 MHz must be validated against the -2 timing model. Power architecture typically uses a TPS6508640 or similar PMIC and decoupling must follow UG585/Z-7015 placement diagrams. Typical applications include industrial motor control (Bldc/FOC with ARM and DSP slices), machine vision smart cameras (Cortex-A9 + image pipeline in fabric), IoT edge gateways with deterministic ARM software + custom interfaces, Software Defined Radio (data pipes to RF ADCs/DACs), automotive driver assistance, and avionics/industrial control. The wide temperature range plus integrated PCIe Gen2 makes it ideal for ruggedized designs. When designing with this SoC, allocate PS peripherals carefully because the 7015 has fewer PL-side HP/HR ports than larger Zynq parts; the 484-CSPBGA constrains MIO/EMIO usage. Verify fabric timing against your synthesis results at the -2 speed grade even if a -1 (which the 7015 does not offer) prototype is treated as the target. Plan thermal dissipation: industrial -40C to +100C operation requires the CSPBGA thermal pad to be soldered to a PCB thermal via array per AMD application notes. This page synthesizes distributor pricing (LCSC, DigiKey, Avnet), drop-in alternatives from the same Xilinx Z-7015 family (so designers can pick the right speed/temperature bin), and practical design guidance that goes beyond the manufacturer's datasheet summary.

詢價 聯絡我們
XC7Z015-2CLG485E - Dual ARM Cortex-A9 Zynq-7000 SoC, 74K Logic Cells | AMD
XC7Z015-2CLG485E

XC7Z015-2CLG485E - Dual ARM Cortex-A9 Zynq-7000 SoC, 74K Logic Cells | AMD

The AMD XC7Z015-2CLG485E is a Zynq-7000 heterogeneous system-on-chip that fuses a dual-core ARM Cortex-A9 MPCore processing system running at up to 766 MHz with an Artix-7 class FPGA fabric of 74K logic cells, supplied in a 485-CSPBGA package measuring 19 x 19 mm. The -2 suffix denotes the -2 speed grade, and the trailing E identifies the extended commercial temperature option of the XC7Z015 device family. A Zynq-7000 SoC sits in the hierarchy above a discrete microcontroller and above a discrete FPGA: it is a programmable logic device (FPGA and CPLD family) that integrates a hardwired application processor, so one silicon die carries both a software-execution environment and fabric-level parallel logic. AMD positions this combination for designs that need deterministic hardware acceleration alongside a familiar Linux or bare-metal software stack, without the two-chip power, area and inter-chip latency penalty of a processor-plus-FPGA design. Key device features include two hard ARM Cortex-A9 cores with CoreSight debug support, a 74K-logic-cell FPGA fabric, integrated DDR memory controllers, and a high-speed serial transceiver capability typical of the mid-density Zynq members. The device is offered in the 485-ball chip-scale BGA package designated CLG485, a 19 x 19 mm surface-mount ball grid array with a 0.8 mm ball pitch that supports high-density PCB escape routing and multilayer board construction. Technically, the device separates the programmable system (PS) from the programmable logic (PL) domains so that each can be optimized independently: the PS runs hard real-time control code and operating-system tasks, while the PL side handles pixel pipelines, protocol framing, sensor capture, DSP blocks and high-speed I/O that would starve a software-only processor. The Artix-7 fabric in this member is the smallest of the Zynq-7000 dual-core options, which keeps dynamic power and board cost low relative to the larger XC7Z020 and XC7Z030 members. Typical uses include industrial machine-vision and inspection cameras, industrial protocol gateways, video capture and encode nodes, medical imaging peripherals, secure boot and encryption appliances, and industrial Ethernet or storage controllers where fabric logic handles wire-speed framing and the CPU manages the control plane. When laying out the board, treat the CLG485 package as a full ball-grid escape problem: follow the AMD Zynq-7000 package pinout and PCB guidelines, provide the documented core supply rails with decoupling close to the balls, and keep high-speed transceiver and memory routing on properly referenced layers to preserve signal integrity and margin on the -2 speed grade. This page consolidates distributor availability, drop-in variant matching, package and speed-grade comparisons, and board-level design guidance that the manufacturer data sheet alone does not present in a directly usable, side-by-side form.

詢價 聯絡我們
XC7Z015-2CLG485I - Dual Cortex-A9 Zynq SoC | AMD
XC7Z015-2CLG485I

XC7Z015-2CLG485I - Dual Cortex-A9 Zynq SoC | AMD

AMD XC7Z015-2CLG485I is a Zynq-7000 heterogeneous system-on-chip combining a dual-core Arm Cortex-A9 MPCore processing system with CoreSight debug technology and 74K FPGA logic cells. The processor operates at 766 MHz, and the device is housed in a 485-CSPBGA package measuring 19 x 19 mm. Its integrated architecture combines programmable logic, ARM processors, memory interfaces, connectivity, and debug functions in one silicon device. A Zynq-7000 SoC is a heterogeneous computing device that bridges the ARM Cortex-A9 microcontroller domain and the FPGA logic domain. Unlike a conventional FPGA, it executes software on its integrated processor while accelerating data-intensive tasks in parallel programmable logic. The XC7Z015 combines the Arm Cortex-A9 platform with Artix-7-class FPGA resources, making it suitable when a design needs flexible hardware parallelism without a separate processor and FPGA. The headline resources include two Arm Cortex-A9 processor cores, a 766 MHz operating frequency, CoreSight debug support, and 74K logic cells. The device also supports 1.5 V, 2 V, and 2.5 V power domains. This combination allows control software, communication protocols, and user-defined datapaths to share one package while maintaining deterministic hardware interfaces between the processor system and programmable logic. The -2 ordering designation identifies the performance grade of this XC7Z015 device, while the CLG485 suffix identifies the 485-ball chip-scale BGA package. AMD documents the XC7Z015-CLG485 package placement separately, including pin locations and device-specific assignments. Engineers should use the AMD package-pinout files and UG865 package information when assigning PCB balls and power rails. Typical uses include industrial image processing, embedded vision, programmable networking, high-speed data acquisition, and control systems requiring both a real-time processor and FPGA acceleration. The ARM side is appropriate for operating systems, networking stacks, and application-level control, while programmable logic can implement parallel algorithms, custom interfaces, or low-latency signal chains. These functions can exchange data through dedicated interfaces inside the SoC rather than through external component-to-component buses. Board design must account for the 485-CSPBGA escape-routing requirement, multiple supply rails, decoupling, and thermal performance of a compact 19 x 19 mm package. Use the pin-description and package-placement documentation during schematic capture, then cross-check every ball against the selected design tools. Confirm the required Vivado device support, memory interface topology, and board-level power sequencing before releasing the PCB layout. This product overview combines the exact resource and package details for the XC7Z015-2CLG485I with practical guidance for FPGA-assisted embedded processing. It also organizes same-package speed and temperature alternatives, selection criteria, and design cautions so engineers can evaluate the device against the exact requirements of a Zynq-7000 implementation.

詢價 聯絡我們
XC7Z015-3CLG485E - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z015-3CLG485E

XC7Z015-3CLG485E - Dual Cortex-A9 Zynq-7000 SoC | AMD

The AMD XC7Z015-3CLG485E is a Zynq-7000 system on chip integrating a dual-core Arm Cortex-A9 MPCore processor with an Artix-7 FPGA fabric, 74K logic cells, and an 866 MHz processor operating point in a 485-CSPBGA package measuring 19 x 19 mm. The device combines programmable logic, hard real-time processing, and CoreSight debug support in one package. A Zynq-7000 SoC is a heterogeneous programmable system-on-chip. Its Arm Cortex-A9 processing system executes operating-system-level software, while the FPGA fabric supports parallel hardware acceleration, custom interfaces, and signal processing. The combination places software control and programmable logic on one device, reducing interconnects and allowing designers to partition workloads between general-purpose processors and dedicated hardware logic. Key features include two Arm Cortex-A9 cores operating at 866 MHz, 74K FPGA logic cells, and 160 DSP resources. The processor subsystem uses a 32-bit RISC architecture and supports supply rails identified as 1.5 V, 2 V, and 2.5 V. CoreSight support provides integrated debug visibility, while the 485-CSPBGA package supports dense board-level integration for industrial, communications, embedded control, and signal-processing systems. The device belongs to the Zynq-7000 product family, whose architecture unifies a dual-core Arm Cortex-A9 processing system with 7 Series FPGA logic. The XC7Z015 implementation offers 74K logic cells, placing it above smaller Zynq configurations in fabric capacity while retaining a processor-centric SoC architecture. The '-3' ordering code identifies the selected device speed grade, while 'E' identifies the associated product grade; the exact commercial and temperature details should be confirmed in the ordering guide before release. Typical applications include industrial control systems, embedded vision, communications infrastructure, test equipment, and edge-processing platforms. In each case, the Cortex-A9 side can manage protocols, control flow, and applications, while FPGA logic can accelerate parallel algorithms or implement deterministic interfaces. The same partitioning model can also combine a real-time supervisory processor with hardware blocks for filtering, data movement, or protocol termination. Board design should begin with the AMD Zynq-7000 package pinout files and the manufacturer power-supply, decoupling, and thermal guidance. The 19 x 19 mm BGA requires careful escape routing and inspection, and all three processor and I/O supply domains must be sequenced and decoupled as specified. Confirm design-tool support, memory-device compatibility, security configuration, and pin multiplexing in Vivado before schematic and layout sign-off.

詢價 聯絡我們
XC7Z020-1CLG400C - 667MHz ARM Cortex-A9 SoC | AMD
XC7Z020-1CLG400C

XC7Z020-1CLG400C - 667MHz ARM Cortex-A9 SoC | AMD

The AMD XC7Z020-1CLG400C is a Zynq-7000 programmable SoC integrating a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug support and 85K Artix-7 FPGA logic cells. The device operates at 667 MHz and is packaged in a 400-ball chip-scale BGA measuring 17 mm by 17 mm. This combination places programmable logic, hard processor cores, memory interfaces, and high-speed I/O in one device. A Zynq-7000 SoC is a heterogeneous system-on-chip, combining an application processor subsystem with programmable FPGA fabric. The ARM Cortex-A9 subsystem executes operating-system-level software, while the Artix-7 fabric accelerates parallel algorithms, implements custom peripherals, or handles high-throughput data movement. This system-on-chip hierarchy differs from a conventional microcontroller because substantial programmable logic is integrated alongside the processor. Key device attributes include two ARM Cortex-A9 cores, a 667 MHz processor rating, 85K logic cells, and a 400-CSPBGA package. The programmable logic allows hardware designers to implement parallel image processing, interface bridging, protocol termination, or custom accelerators while the processor subsystem handles control software and operating-system tasks. CoreSight support provides integrated visibility for hardware-assisted debugging and trace-based development. The XC7Z020 belongs to the Zynq-7000 family, which combines an ARM Cortex-A9-based processing system with Xilinx 7-series FPGA fabric. The -1 suffix identifies the performance grade, CLG400 identifies the 400-ball package, and C identifies the commercial temperature option. Package-level integration reduces the number of interconnects compared with a separate processor and FPGA, but it also requires careful power, decoupling, and escape-routing work because the BGA uses a dense ball pitch and exposes many dedicated pins. Typical uses include industrial vision, edge video processing, programmable industrial control, communications infrastructure, and embedded systems requiring deterministic parallel processing. In these applications, software running on the Cortex-A9 cores can coordinate system behavior while FPGA logic concurrently processes image data, manages high-speed links, or accelerates repetitive computations. The 667 MHz processor and 85K logic cells provide a balanced platform for control-heavy systems with parallel hardware tasks. The principal design consideration is power planning. Every power rail must satisfy its specified voltage, sequencing, and current limits, while the CLG400 package requires careful via-in-pad or via-beneath-pad arrangements where the board design permits them. Use the AMD package pinout files and Zynq-7000 datasheet to assign every ball, bank voltage, decoupling capacitor, and configuration signal before layout release. This product page combines the exact device identity, package information, processor and logic-cell ratings, strict drop-in alternatives, application guidance, and engineering-focused design notes. It also distinguishes exact replacement options from larger or differently packaged Zynq devices that would require design changes.

詢價 聯絡我們
XC7Z020-1CLG400I - Dual-Core Cortex-A9 SoC FPGA | AMD
XC7Z020-1CLG400I

XC7Z020-1CLG400I - Dual-Core Cortex-A9 SoC FPGA | AMD

The AMD XC7Z020-1CLG400I is a programmable system-on-chip combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric, 85K logic cells, and a 667 MHz processor clock in a 400-CSPBGA package measuring 17 x 17 mm. The device also includes CoreSight debug and observation resources. This combination integrates hard-processor and programmable-logic functions on one package, making the XC7Z020 suitable for embedded control, data processing, industrial automation, communications, and test systems. A Zynq-7000 SoC is a heterogeneous embedded computing device that combines an Arm Cortex-A9 application processing unit with an FPGA fabric. The processor executes operating-system and application software, while the programmable logic implements parallel data paths, custom interfaces, accelerators, and signal-processing functions. This product hierarchy places the XC7Z020 at the intersection of embedded processors, FPGA and CPLD devices, and application-specific programmable SoCs. The principal device attributes include dual Arm Cortex-A9 processor cores, 85K FPGA logic cells, a stated 667 MHz Cortex-A9 operating frequency, CoreSight capabilities, and a 400-CSPBGA package. The integrated architecture allows software-controlled systems to place time-critical or highly parallel operations in FPGA logic while retaining conventional program flow in the processor subsystem. Pin-compatible ordering options within the CLG400 family can support different speed, temperature, or power configurations when the device qualification and operating requirements are compatible. The processor-based portion provides an Arm-based execution environment for control software, networking stacks, and embedded applications. The FPGA portion provides programmable combinational and sequential logic alongside fixed I/O resources, allowing designers to implement custom peripherals, data acquisition paths, protocol accelerators, or high-throughput parallel processing. Because both domains share the package and system fabric, interconnect between software and programmable logic can be established according to the AMD Zynq architecture and supported interfaces. Typical implementations include industrial programmable logic controllers, factory monitoring gateways, camera and image-processing modules, medical instrumentation, industrial networking equipment, and embedded test platforms. In these systems, the Cortex-A9 cores can manage protocols and supervisory functions while FPGA logic accelerates sampling, filtering, encoding, or interface handling. The CLG400 package is particularly relevant to dense embedded designs where a large pin count, compact 17 x 17 mm body, and mixed processor-logic implementation are required. PCB implementation requires careful allocation of power, ground, high-speed memory, and configurable I/O resources. Follow the AMD package pinout files and XC7Z020 data sheet for the exact CLG400 ball assignments, recommended power sequencing, decoupling, and differential-pair routing. Confirm the selected board configuration, memory interface implementation, and peripheral assignments with the complete Vivado design before fabrication. This product page combines the identifiable processor, FPGA, package, and sourcing characteristics of the XC7Z020-1CLG400I with package-focused alternatives, engineering design notes, and a parameter comparison intended to accelerate component selection and board-level planning.

詢價 聯絡我們
XC7Z020-1CLG484C - 667MHz Zynq-7000 SoC FPGA | AMD
XC7Z020-1CLG484C

XC7Z020-1CLG484C - 667MHz Zynq-7000 SoC FPGA | AMD

The AMD XC7Z020-1CLG484C is a Zynq-7000 heterogeneous system-on-chip combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric in a 484-CSPBGA package. The device provides 85,000 logic cells, operates at 667 MHz, and integrates CoreSight debug capabilities into a single 19 mm by 19 mm package. This combination allows software-controlled processing and programmable hardware acceleration to share one device. A Zynq-7000 SoC is a programmable logic device that incorporates a hard processor subsystem with an FPGA fabric. The processor subsystem provides Arm Cortex-A9 software execution, while the Artix-7 fabric implements parallel data paths, custom interfaces, accelerators, and real-time control logic. In the system hierarchy, the XC7Z020 belongs to the SoC, FPGA and CPLD, embedded processor, and programmable logic device categories. The XC7Z020-1CLG484C includes two Arm Cortex-A9 processor cores, CoreSight debugging, 85,000 FPGA logic cells, and a stated operating frequency of 667 MHz. Its integrated architecture reduces the number of interconnects between the processor and programmable logic compared with a separate microcontroller-plus-FPGA design. The CLG484 package also supports memory interfaces, general-purpose I/O, configuration resources, and dedicated clock resources for embedded applications. The key engineering benefit is deterministic hardware/software partitioning. Software running on the Cortex-A9 subsystem can control system tasks, while the FPGA fabric can execute parallel algorithms at hardware speed. This architecture is useful when a design requires flexible interfaces, substantial control logic, or dedicated acceleration without the component count of a two-chip solution. Exact memory width, I/O count, power figures, and temperature limits depend on the selected device configuration and are not stated in the product listing. Typical applications include industrial vision, networked control systems, embedded data acquisition, communications equipment, sensor processing, and test-and-measurement instruments. The dual-core processor is suitable for supervisory software, networking stacks, or control loops, while the FPGA fabric can implement interfaces and data-processing pipelines that benefit from parallel execution. PCB design should follow the AMD CLG484 package and pinout files because the 484-ball BGA requires careful escape-routing, via-in-pad or through-via planning, and adequate power and ground distribution. Confirm the power rails, decoupling requirements, configuration interface, memory topology, and exposed thermal requirements against the manufacturer documentation before releasing the layout. This product record combines the exact orderable MPN, package information, logic-cell count, processor architecture, operating frequency, and pin-compatible Zynq-7000 alternatives. It also adds application guidance and PCB considerations that help engineers evaluate the device beyond a basic catalog listing.

詢價 聯絡我們
XC7Z020-1CLG484I - Zynq-7000 SoC 667MHz Dual ARM Cortex-A9 | AMD/Xilinx
XC7Z020-1CLG484I

XC7Z020-1CLG484I - Zynq-7000 SoC 667MHz Dual ARM Cortex-A9 | AMD/Xilinx

The AMD/Xilinx XC7Z020-1CLG484I is a Zynq-7000 All Programmable System-on-Chip (AP SoC) that integrates a dual-core ARM Cortex-A9 MPCore processing system with 667MHz core clock, together with Artix-7 programmable logic of 85K logic cells, all housed in a 484-ball CSBGA (CLG484) package measuring 19x19 mm. It is the -1 speed grade, industrial temperature range variant of the XC7Z020 family. A SoC FPGA such as the Zynq-7000 is a single silicon device that fuses a hard processor subsystem (HSS) and a soft FPGA fabric. The processor subsystem runs software (Linux, RTOS, bare-metal), while the programmable logic provides hardware acceleration, custom I/O, and parallel data-path extensions. Zynq-7000 devices sit within the broader taxonomy of heterogeneous compute devices, alongside MPSoC and Versal Adaptive SoC families from AMD/Xilinx. This hybrid architecture is ideal for embedded systems that require both deterministic real-time control and high-throughput data processing. Key features include dual ARM Cortex-A9 cores with NEON SIMD and single/double precision FPU, on-chip L1 caches (32 KB I-cache, 32 KB D-cache per core) and 512 KB L2 cache, integrated Memory Controller for DDR3/DDR3L/LPDDR2, dual USB 2.0 OTG, dual Gigabit Ethernet MACs, dual SD/SDIO controllers, and 2x UART, 2x SPI, 2x I2C peripheral interfaces. The integrated Artix-7 FPGA fabric includes 85K logic cells, 4.9 Mb block RAM, and 220 DSP slices. The Zynq-7000 architecture uses a tightly coupled AXI interconnect between the PS and PL, allowing hardware-accelerated peripherals to communicate with the processor at high bandwidth with predictable latency. The CLG484 package exposes multiple high-performance (HP) and high-range (HR) I/O banks for DDR interfacing and general-purpose I/O. Typical applications include industrial motor drives, machine vision, software-defined radio, ADAS driver assistance systems, medical imaging, and embedded vision. The wide temperature range and -1 speed grade make the XC7Z020-1CLG484I well suited for industrial control and factory automation. When designing with this device, careful attention must be paid to PCB layout, power-rail sequencing, and DDR signal integrity. Use Vivado Design Suite and Vitis for hardware/software co-design, and refer to the official Zynq-7000 datasheet (DS187) and PCB design guide (UG933). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $45.94 有庫存
XC7Z020-2CLG400E - 85K Logic Cell Zynq SoC | AMD
XC7Z020-2CLG400E

XC7Z020-2CLG400E - 85K Logic Cell Zynq SoC | AMD

The AMD XC7Z020-2CLG400E is a Zynq-7000 programmable system-on-chip combining a dual-core ARM Cortex-A9 processor with an Artix-7 FPGA, 85K logic cells, and a maximum processor frequency of 766 MHz in a 400-CSPBGA package measuring 17 x 17 mm. The device integrates programmable logic with a hard processor subsystem and CoreSight debug capabilities for Linux-based embedded systems. A Zynq SoC is an FPGA and microprocessor integrated into one semiconductor package. Its hierarchy spans system-on-chip, programmable logic device, FPGA, and embedded processor platform. This integration allows software-controlled algorithms, interfaces, and control logic to operate within one device, reducing component count and simplifying data exchange between the processor and programmable fabric. Principal features include dual ARM Cortex-A9 MPCore processing, 85K FPGA logic cells, CoreSight debugging, and operation in the CLG400 CSPBGA package. The integrated processor runs at up to 766 MHz, while the Artix-7 fabric supports parallel logic, digital signal processing, and programmable I/O. These resources suit industrial control, communications, image processing, embedded vision, and test systems that need both deterministic hardware logic and a conventional operating system. The architecture separates software tasks from programmable hardware. ARM software handles networking, control, and an operating environment, while FPGA logic accelerates data acquisition, filtering, protocol handling, or other timing-sensitive workloads. Direct communication between the processor and programmable logic avoids external FPGA-to-SoC interfaces while allowing parallel data paths to be implemented efficiently. Typical deployments include camera-based inspection, industrial gateways, networked sensor controllers, programmable automation equipment, and embedded communications platforms. The 400-ball package supports dense board layouts but requires careful escape routing, multilayer PCB construction, and controlled power and ground distribution. Designers should follow the AMD package pinout files and Zynq-7000 power guidance when defining ball assignments and layer transitions. The primary design trade-off is integration against package complexity. A Zynq SoC can replace a separate processor and FPGA while consolidating control and accelerated logic, but the CLG400 BGA footprint demands careful fanout, via planning, signal-integrity control, and assembly process control. A power design that satisfies processor, FPGA, I/O, and auxiliary supply requirements is equally essential. This product record combines the manufacturer data-sheet identity, exact package and processor characteristics, sourcing information, same-footprint alternatives, and practical PCB guidance. It also distinguishes speed- and temperature-grade variants so engineers can assess replacement suitability without assuming that a similar suffix guarantees equivalent production requirements.

詢價 聯絡我們
XC7Z020-2CLG400I - Dual Cortex-A9 85K Zynq SoC | AMD
XC7Z020-2CLG400I

XC7Z020-2CLG400I - Dual Cortex-A9 85K Zynq SoC | AMD

AMD XC7Z020-2CLG400I is a Zynq-7000 Artix-7 FPGA system on chip integrating a dual-core ARM Cortex-A9 MPCore processor with CoreSight debug technology, 85K programmable logic cells, and a 766 MHz processor operating point in a 400-CSPBGA package measuring 17 mm by 17 mm. It combines programmable hardware logic with an embedded ARM processing system on one device. A Zynq-7000 system on chip belongs to the FPGA & CPLD and embedded processor-device hierarchy. Unlike a conventional microcontroller, which executes instructions entirely in software, the Zynq architecture allows control and data-processing code to run on the ARM Cortex-A9 MPCore processor while independent algorithms, interfaces, and accelerators execute in parallel within the Artix-7 programmable logic. This heterogeneous architecture provides software flexibility alongside hardware-level parallelism and deterministic control capability. The XC7Z020 device provides 85K logic cells for FPGA fabric and a maximum listed processor frequency of 766 MHz. Its dual-core Cortex-A9 MPCore configuration supports concurrent processing, while CoreSight provides integrated debug and trace capabilities. The -2 design suffix identifies the device performance grade, while the I suffix identifies the industrial-temperature configuration. These ordering details are important when replacing another Zynq-7000 member on an existing board. Technically, the device combines hard processor logic with programmable FPGA resources rather than implementing the ARM processor itself in soft logic. This division allows software to manage control flow, operating systems, communication stacks, or application logic while the FPGA fabric handles parallel datapaths, custom interfaces, video processing, or signal-processing pipelines. The fixed ARM subsystem and programmable fabric share access to memory and programmable I/O resources at the device level. XC7Z020-2CLG400I is suitable for industrial embedded control, networked data acquisition, industrial Ethernet, machine vision, test and measurement, communications equipment, and custom accelerator systems. The 400-CSPBGA package supports compact designs requiring numerous high-density connections, although its fine pitch requires careful PCB layout, controlled impedance routing, dense decoupling, and manufacturing capability suited to advanced BGA assemblies. Designers should select the CLG400 package outline and land pattern directly from the manufacturer package documentation, use the complete power, ground, decoupling, configuration, clock, and I/O requirements from the official device documentation, and validate signal integrity and manufacturing yield at the chosen BGA process capability. Device programming, security configuration, clocking, and reset behavior must also be verified for the target board before production release.

詢價 聯絡我們
XC7Z020-2CLG484E - 85K Zynq SoC, 766MHz | AMD
XC7Z020-2CLG484E

XC7Z020-2CLG484E - 85K Zynq SoC, 766MHz | AMD

The AMD XC7Z020-2CLG484E is a heterogeneous Zynq-7000 system-on-chip integrating a dual-core ARM Cortex-A9 MPCore processing system, CoreSight debug capability, and an Artix-7 FPGA fabric with 85K logic cells. The device operates at up to 766 MHz and is packaged in a 484-CSPBGA package measuring 19 mm by 19 mm. A Zynq system-on-chip combines a programmable logic device with an embedded Arm processor in one silicon device. This integration places the processing system and FPGA fabric on the same die while retaining separate configuration, memory, peripheral, and I/O resources. The result is a platform suitable for systems that require both deterministic hardware acceleration and operating-system-capable application processing. The XC7Z020 includes an FPGA fabric with 85K logic cells, supporting parallel hardware functions that can execute alongside the dual Arm Cortex-A9 cores. CoreSight provides integrated debug and trace support for software development and hardware-assisted verification. The CLG484 option offers 484 package balls in a 19 mm by 19 mm CSPBGA format for compact embedded-system designs. The -2 device code denotes speed grade 2, while the E suffix identifies the extended-temperature ordering option associated with the product family. The listed operating-temperature range is 0 °C to +100 °C. The -2 speed grade reaches 766 MHz in the manufacturer listing, making it a mid-performance member of the Zynq-7000 range. Typical uses include industrial control, camera and image processing, industrial networking, embedded data acquisition, communications equipment, and edge-processing systems. The Arm processor can control operating-system-level functions, while the programmable logic fabric can implement parallel data paths, custom interfaces, accelerators, or deterministic I/O handling. PCB implementation requires careful BGA layout, power planning, decoupling, and thermal management. Designers should use the AMD package pinout files and the Zynq-7000 data sheet when assigning balls, memory interfaces, I/O standards, and power rails. Vivado-compatible constraints and the selected board device also need to match the exact ordering code before implementation begins. This product record combines the verified device identity, package, operating information, alternate-ordering references, and practical engineering guidance. It also highlights where design decisions require the official AMD pinout files, power guidance, and timing documentation rather than generic package assumptions.

詢價 聯絡我們
XC7Z020-2CLG484I - Zynq-7000 SoC 85K Logic Cells | AMD
XC7Z020-2CLG484I

XC7Z020-2CLG484I - Zynq-7000 SoC 85K Logic Cells | AMD

The AMD XC7Z020-2CLG484I is a Zynq-7000 All Programmable SoC (AP SoC) integrating a dual-core ARM Cortex-A9 MPCore processor with an Artix-7 class FPGA fabric in a single 484-ball CSPBGA (19x19 mm) package. The processor subsystem runs at up to 766 MHz with CoreSight debug, while the programmable logic provides 85,000 logic cells, 53,200 LUTs, 106,400 flip-flops, 220 DSP slices, and 4.9 Mb of block RAM. A System on Chip (SoC) is an integrated circuit that consolidates processor, memory controllers, peripherals, and programmable hardware on a single substrate. The Zynq-7000 family pairs an ARM-based processing system (PS) with programmable logic (PL) over high-bandwidth AXI interfaces, reducing board space, power, and system complexity versus discrete processor-plus-FPGA solutions. Key features include a DDR3/DDR3L memory controller with ECC, USB 2.0, Gigabit Ethernet, and support for I/O voltages of 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The -2 speed grade supports up to 766 MHz PS operation and 200 MHz+ fabric clocking. The industrial temperature grade (-40C to +100C) targets harsh environments. Architecturally, the PS and PL are independent power domains with defined sequencing requirements (VCCINT, VCCAUX, VCCBRAM, VCCO). The device supports partial reconfiguration, allowing dynamic PL updates while the PS continues running. The memory controller delivers robust DDR3/DDR3L with ECC for industrial and automotive-class designs. Typical applications include motor control, industrial automation, software-defined radio, video processing, and embedded vision. The device suits real-time processing with hardware acceleration, such as machine vision and high-speed data acquisition. Design consideration: ensure correct power-rail sequencing and provide a configuration source (QSPI flash) and PS clock; refer to the Zynq-7000 TRM (UG585) for detailed guidance. Pricing from $60.07 (LCSC, as of 2026-08-29).

USD $49.00 聯絡我們
XC7Z020-3CLG400E - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z020-3CLG400E

XC7Z020-3CLG400E - Dual Cortex-A9 Zynq-7000 SoC | AMD

AMD XC7Z020-3CLG400E is a Zynq-7000 adaptive system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with CoreSight debug capability and an Artix-7 FPGA fabric. The device operates at up to 866 MHz, provides 85K logic cells, and is packaged in a 400-pin CS-BGA measuring 17 x 17 mm. The -3 designation identifies the device performance grade, while CLG400 identifies the package configuration. A Zynq-7000 SoC is an adaptive SoC in which an ARM-compatible processor system and programmable logic share a common silicon device. This integration places application processing, programmable hardware acceleration, high-speed I/O, and development instrumentation within one package. Compared with a discrete processor and FPGA arrangement, the integrated architecture can reduce board-level interconnects and provide a unified hardware/software design flow for embedded processing applications. The XC7Z020-3CLG400E includes two ARM Cortex-A9 processor cores with CoreSight debug support, an 85K-logic-cell Artix-7 FPGA fabric, and a 400-pin CSPBGA package. Its listed maximum processor frequency is 866 MHz. The device supports 32-bit Thumb-2 processing and is associated with 1.2 V and 3.3 V supply domains. These characteristics position it for control, communications, image-processing, and embedded systems requiring both software algorithms and programmable logic. The processor subsystem executes operating-system and application software, while the FPGA fabric implements parallel datapaths, custom interfaces, protocol handling, or hardware accelerators. CoreSight adds hardware-assisted debug visibility to the processor system. For board designers, the principal integration challenge is the dense 400-ball BGA escape routing and separation of sensitive power, clock, and interface nets. A pin-compatible speed-grade alternative can simplify component qualification when its operating conditions and ordering information meet the system requirements. Typical applications include industrial automation, embedded vision, communications gateways, instrumentation, and mixed software-and-hardware control systems. The dual Cortex-A9 configuration supports concurrent software tasks, while the FPGA fabric can implement time-critical operations or custom peripherals. In a camera-based system, for example, programmable logic could acquire and pre-process image data while the processor performs higher-level control and communication. When replacing this device, verify the complete package drawing, power architecture, exposed-pad requirements, configuration memory interface, clocking, and supported processor speed grade. Package pin compatibility alone does not establish identical operating limits. The AMD Zynq-7000 package and pinout files should be used to confirm every ball assignment before releasing a substitute to manufacturing. This page combines exact device identity, package details, speed-grade comparisons, replacement guidance, and design considerations in a compact engineering format. It helps engineers distinguish a true board-compatible option from a merely similar Zynq device while emphasizing the checks required for reliable BGA layout, power delivery, programming, and production assembly.

詢價 聯絡我們
XC7Z020-3CLG484E - 866MHz Dual Cortex-A9 Zynq SoC | AMD
XC7Z020-3CLG484E

XC7Z020-3CLG484E - 866MHz Dual Cortex-A9 Zynq SoC | AMD

The AMD XC7Z020-3CLG484E is a Zynq-7000 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor with CoreSight debug technology and an Artix-7 FPGA fabric. The device provides 866 MHz processor operation, 85K logic cells, and a 12-bit processing interface in a 484-CSPBGA package measuring 19 x 19 mm. Its industrial temperature range is 0°C to +100°C. A Zynq system-on-chip integrates programmable logic and a microprocessor into one device. The ARM processing subsystem handles operating systems, networking, control functions, and software applications, while the FPGA fabric accelerates parallel processing, signal processing, interfaces, and custom hardware functions. This integration reduces the component count and inter-device communication requirements of a separate processor-plus-FPGA implementation. Key features include two ARM Cortex-A9 processor cores operating at 866 MHz, CoreSight debug support, 85K FPGA logic cells, and a 484-CSPBGA package. The 19 x 19 mm package supports dense integration on complex embedded boards. The specified -3 speed grade, industrial temperature range, and extended ordering suffix identify the device for designs operating from 0°C to +100°C. The architecture permits software-controlled FPGA configuration through the Zynq processing subsystem. Engineers can place datapaths, video pipelines, protocol interfaces, or other time-critical functions in programmable logic while running higher-level applications on the processor. CoreSight provides integrated visibility for debugging the complete hardware-software system, which can shorten fault isolation compared with a discrete implementation. Typical uses include industrial IoT controllers, embedded vision systems, industrial automation, network equipment, and connected embedded products. The FPGA fabric is particularly useful when parallel data paths, deterministic interface behavior, or custom hardware acceleration must coexist with an embedded processor and its software ecosystem. PCB design should follow the AMD CLG484 package, pinout, and power-supply guidance. Differential pairs, high-speed memory connections, power rails, decoupling, and exposed thermal-management requirements must be reviewed together because BGA assembly can require specialized inspection and rework capability. This product page combines the verified device characteristics, speed- and temperature-grade alternatives, application guidance, package considerations, and structured engineering comparisons to support design selection and procurement planning.

詢價 聯絡我們
XC7Z030-1FB484I - 667MHz Zynq SoC | AMD | Industrial FPGA
XC7Z030-1FB484I

XC7Z030-1FB484I - 667MHz Zynq SoC | AMD | Industrial FPGA

The AMD XC7Z030-1FB484I is a Zynq-7000 Kintex-7 system-on-chip FPGA with 125K logic cells, dual ARM Cortex-A9 MPCore processors operating at 667 MHz, and CoreSight debug support, housed in a 484-FCBGA package measuring 23 x 23 mm. It combines programmable FPGA logic and a hard processor subsystem in one device, making it suitable for embedded control, industrial automation, networking, signal processing, and connected systems. A Zynq-7000 SoC FPGA integrates a programmable logic section with one or more ARM Cortex-A9 processors. The processor subsystem executes software, while the FPGA fabric implements parallel datapaths, custom interfaces, protocol engines, and control logic. This combination allows designers to place software-controlled functions and hardware-accelerated operations in one package instead of using a separate processor and FPGA. The XC7Z030-1FB484I provides 125K logic cells and a 667 MHz processor frequency according to the verified distributor listing. The part is identified as a speed-grade-1, industrial-temperature device by the verified FPGA Market listing. Its 484-FCBGA package provides 484 terminals in a 23 x 23 mm surface-mount format. Exact pin names, electrical limits, I/O standards, memory configuration, and power requirements were not included in the supplied source data and must be confirmed in the manufacturer datasheet. Typical designs use the programmable fabric for high-throughput parallel processing and the Cortex-A9 subsystem for operating-system support, networking, control loops, or application workloads. The integrated architecture can simplify a board-level partition when software and programmable logic must exchange data frequently. Engineers should still budget for external memory, clocking, power regulation, signal conditioning, and thermal management where the selected design requires them. The most important layout consideration is package escape routing. A 484-ball BGA device requires a substrate or PCB with compatible ball geometry, via-in-pad or fanout strategy, controlled impedance, and an assembly process capable of handling the package pitch. Verify the exact pinout and I/O assignments against AMD package documentation before schematic capture or PCB release. This page consolidates verified distributor and cross-reference results, separates confirmed specifications from missing parameters, and provides engineering guidance for evaluating this industrial Zynq SoC FPGA. It does not infer a drop-in replacement unless a manufacturer or distributor explicitly verifies the same package and pin compatibility.

詢價 聯絡我們
XC7Z030-1FBG484C - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z030-1FBG484C

XC7Z030-1FBG484C - Dual Cortex-A9 Zynq-7000 SoC | AMD

The AMD XC7Z030-1FBG484C is a Zynq-7000 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor with CoreSight debug support and approximately 125,000 Kintex-7 FPGA logic cells. It operates at 667 MHz and is packaged in a 484-pin FCBGA measuring 23 x 23 mm. The integrated architecture allows software-controlled programmable logic and a hard processor subsystem to operate within one device. A Zynq system-on-chip is a heterogeneous embedded computing device that combines an application processor subsystem, programmable logic, memory interfaces, and high-speed serial connectivity. The XC7Z030 belongs to the Zynq-7000 family, where the ARM Cortex-A9 subsystem executes operating systems or bare-metal software while the FPGA fabric accelerates parallel logic, fixed-function datapaths, image processing, and interface termination. This integration reduces inter-chip data transfers and permits hardware-assisted software partitioning. The device provides dual 32-bit ARM Cortex-A9 processor cores, CoreSight debug capability, and approximately 125,000 FPGA logic cells. Its processor performance grade is rated at 667 MHz. The 484-FCBGA package provides 484 electrical contacts and a 23 x 23 mm body, making dense PCB layout, multilayer routing, thermal management, and BGA assembly essential. The suffix identifies a 667 MHz grade in the commercial-temperature configuration. The architecture supports hardware/software co-design because control logic, parallel pipelines, memory controllers, and peripheral interfaces can be implemented in the programmable fabric, while the processor subsystem manages control flow and higher-level functions. This division can improve throughput for tasks such as protocol handling, data acquisition, encryption, video pipelines, and network packet processing. FPGA logic can execute parallel operations concurrently, while the processor is better suited to operating systems, control software, and sequential application logic. Typical uses include industrial control, communications infrastructure, embedded vision, instrumentation, aerospace and defense systems, and high-performance embedded processing. The combination is especially useful when a product needs deterministic programmable logic alongside a familiar processor software environment. It can also consolidate functions that otherwise require an FPGA, processor, and external interface devices on separate boards. PCB implementation should follow the AMD package placement and pinout files, provide adequate power and ground distribution, and account for the large BGA escape-routing area. Validate the complete power architecture, high-speed routing, thermal performance, and assembly process before production because package complexity directly affects manufacturability and first-pass success. This product page consolidates the processor, FPGA, package, and application characteristics into an engineering-focused reference. It also distinguishes same-package speed and temperature options, highlights replacement constraints, and organizes comparison and design guidance for selecting the appropriate Zynq-7000 device.

詢價 聯絡我們