產品(44,000+)

XC7Z030-1FBG676I - 125K Zynq SoC, 667MHz, 676-FCBGA | AMD
XC7Z030-1FBG676I

XC7Z030-1FBG676I - 125K Zynq SoC, 667MHz, 676-FCBGA | AMD

The AMD XC7Z030-1FBG676I is a Zynq-7000 Kintex-7 system-on-chip with 125K logic cells, a dual-core ARM Cortex-A9 processor operating at 667 MHz, and CoreSight debug support in a 676-pin FCBGA package measuring 27 x 27 mm. It combines programmable FPGA logic with an integrated application processor and CoreSight debugging in one device. A Zynq system-on-chip is a heterogeneous processing platform that combines an ARM-based microprocessor subsystem with programmable FPGA logic in the same package. The XC7Z030 belongs to the FPGA and CPLD category while integrating an ARM Cortex-A9 MPCore processor, dedicated memory controllers, programmable logic, and debug resources. This combination supports hardware-assisted control, real-time processing, and flexible peripheral or algorithm implementation without requiring separate discrete devices. Key device characteristics include 125K FPGA logic cells, 667 MHz processor performance, dual ARM Cortex-A9 cores, and CoreSight debug capability. The -1 speed designation identifies the lower-speed grade in the XC7Z030 family, while the industrial I suffix identifies its intended operating-temperature class. The 676-FCBGA package supports high-density interconnect requirements but demands careful PCB layout, substrate design, and thermal planning because of its large ball count and substantial I/O bandwidth. The device combines hard processor logic with a Kintex-7 FPGA fabric. The processor subsystem executes operating-system or bare-metal software, while the programmable fabric can implement parallel data paths, custom interfaces, accelerators, or protocol logic. This division of work allows software to control system behavior while FPGA logic handles timing-critical operations. Migration between the -1 and -2 speed grades can simplify product planning because the listed device identifiers use the same FBG676 package family, although the processor frequency changes from 667 MHz to 800 MHz. Typical applications include industrial vision, high-speed data acquisition, network appliances, programmable logic controllers, test and measurement equipment, embedded control systems, and communications infrastructure. The dual-core ARM subsystem supports concurrent control-plane and data-plane software, while the FPGA fabric accelerates parallel processing and reduces external component count. These applications benefit from programmable hardware, deterministic I/O behavior, and integrated debug visibility. PCB implementation is the dominant hardware consideration. A 676-FCBGA device requires a matched ball pattern, controlled impedance routing, adequate power and ground planes, decoupling close to supply pins, and assembly processes capable of handling the package pitch and thermal requirements. Engineers should use the AMD package placement diagram and the official Zynq-7000 pinout files when assigning board layers and verifying escape routing before schematic capture is released for fabrication. This product overview combines the device identity, package constraints, speed-grade differences, and practical implementation considerations with verified family alternatives. It also identifies which electrical, thermal, and pin-level attributes require confirmation from AMD documentation before layout release, helping engineers distinguish confirmed product facts from parameters that still need direct design review.

詢價 聯絡我們
XC7Z030-1FF676I - Dual-Core ARM Zynq SoC | AMD | 676-FCBGA
XC7Z030-1FF676I

XC7Z030-1FF676I - Dual-Core ARM Zynq SoC | AMD | 676-FCBGA

The AMD XC7Z030-1FF676I is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor with programmable Kintex-7 FPGA logic, 125K logic cells, a 667 MHz processor clock, and a 676-ball FCBGA package measuring 27 mm by 27 mm. The matched industrial-ordering designation XC7Z030-1FFG676I is listed by DigiKey with the same 125K logic-cell and 667 MHz configuration in the 676-FCBGA package. A Zynq system-on-chip is an FPGA SoC that integrates a hard microcontroller subsystem with programmable FPGA fabric. In the product hierarchy, it is a programmable-logic device, FPGA and CPLD, and heterogeneous SoC combining an ARM processor with Kintex-7 FPGA resources. This integration allows software-controlled functions and hardware data paths to operate in one device while reducing the number of external devices required in an embedded system. The verified device listing identifies two ARM Cortex-A9 MPCore processors, CoreSight debug support, Kintex-7 FPGA logic, 125K logic cells, and a 667 MHz clock. The 676-FCBGA package provides a high-pin-count interconnect for programmable logic I/O, memory interfaces, high-speed serial links, and processor peripherals. Because the target is a high-density BGA, its footprint, ball map, power distribution, and escape routing must be controlled during PCB layout. The exact Xilinx ordering code carries meaningful configuration information, but the supplied web records do not expose the complete electrical tables, memory-map details, transceiver characterization, or power-sequencing requirements. Engineers should therefore obtain the official manufacturer datasheet and device-specific design documentation before finalizing voltage rails, decoupling, clocking, PCB stack-up, and signal-integrity simulations. The visible distributor records also contain a naming difference between the requested XC7Z030-1FF676I and the commonly indexed XC7Z030-1FFG676I, which should be reconciled against the manufacturer ordering guide. Typical Zynq-7000 applications include industrial control and automation, communications equipment, embedded vision, data acquisition, networking appliances, and test systems that benefit from combining an ARM operating environment with parallel programmable logic. In such systems, the processor can manage control software and external interfaces while FPGA fabric implements time-critical data paths, protocol acceleration, signal conditioning, or custom interfaces. PCB design is the principal implementation consideration for this 676-ball device. Use the manufacturer-defined ball map and escape-routing methodology, provide continuous power and ground planes, and place decoupling capacitors close to the relevant supply balls. Do not infer pin compatibility from package dimensions alone: the AMD support result specifically raises uncertainty between closely related Zynq ordering codes, so ball assignment, voltage levels, and device configuration must be checked before substitution. This page consolidates verified distributor specifications, documented ordering variants, package information, pricing, and replacement constraints into a design-oriented summary. It also distinguishes verified drop-in candidates from broader functional alternatives and avoids assigning unpublished electrical specifications or an unverified 676-ball pin map.

詢價 聯絡我們
XC7Z030-1FFG676C - 667MHz Dual Cortex-A9 SoC | AMD
XC7Z030-1FFG676C

XC7Z030-1FFG676C - 667MHz Dual Cortex-A9 SoC | AMD

The AMD/Xilinx XC7Z030-1FFG676C is a Zynq-7000 programmable system-on-chip integrating a dual-core Arm Cortex-A9 MPCore processor at 667 MHz with a Kintex-7 FPGA containing 125,000 logic cells. The device also provides CoreSight debug capabilities and is housed in a 676-pin FCBGA package measuring 27 mm by 27 mm. A programmable SoC combines a programmable logic system with an embedded application processor in one semiconductor device. The processor side of the Zynq-7000 architecture runs software, operating systems, networking stacks, and control code, while the FPGA fabric implements parallel hardware functions such as interfaces, signal processing, encryption, and data movement. This hierarchy places the XC7Z030 at the intersection of microprocessor, FPGA, embedded processing, and programmable system-on-chip product categories. The principal architecture features are a 667 MHz dual-core Arm Cortex-A9 processor, 125,000 Kintex-7 FPGA logic cells, and integrated CoreSight debugging. The 676-ball FCBGA package supports dense connections among the processor system, programmable logic, memory interfaces, and external I/O. Its high pin count accommodates parallel fabric I/O alongside the processor subsystem's DDR memory, networking, USB, and other peripheral interfaces. Unlike a fixed-function application processor, the XC7Z030 can divide a design between sequential software and parallel FPGA hardware. Software is appropriate for control flow, networking, protocol processing, and operating-system support, while deterministic parallel datapaths can be implemented in FPGA logic. AMD describes this architecture as Zynq-7000 SoC First Generation Architecture, offering a programmable alternative to a conventional ASIC or separately integrated processor and FPGA. Typical uses include industrial automation, networked embedded control, video and image processing, communications equipment, test systems, and high-performance embedded processing platforms. The dual Cortex-A9 configuration is suitable for applications that need Linux-class software support alongside FPGA-assisted acceleration. The 667 MHz processor rating and 125,000 logic cells define the balance between sequential processing capacity and programmable-logic capacity. The 676-pin FCBGA requires exact ball-map, escape-routing, power, and decoupling decisions. Use the AMD package-pinout files and the Zynq-7000 design documentation when assigning PCB balls, and validate the completed design against power sequencing, thermal, signal-integrity, and high-speed memory-layout requirements. This page consolidates the device's confirmed processor, logic-capacity, speed, and package characteristics with drop-in alternatives, engineering-selection guidance, and practical design notes. It also distinguishes true FFG676 package compatibility from related Zynq variants that use different package suffixes or device options.

詢價 聯絡我們
XC7Z030-1FFG676I - Dual Cortex-A9 Zynq SoC | AMD
XC7Z030-1FFG676I

XC7Z030-1FFG676I - Dual Cortex-A9 Zynq SoC | AMD

The AMD XC7Z030-1FFG676I is a Zynq-7000 system-on-chip that combines a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug capability and Kintex-7-based programmable logic. The device provides 125K logic cells, a maximum listed processor frequency of 667 MHz, and a 676-ball FCBGA package measuring 27 x 27 mm. Its tightly coupled architecture allows software-controlled logic to accelerate hardware functions without moving every operation into a discrete processor. A Zynq SoC is a heterogeneous semiconductor that belongs to the FPGA and CPLD product hierarchy while also incorporating a hard processor system. The ARM Cortex-A9 subsystem executes operating-system-level software, while the programmable logic fabric supports custom datapaths, interfaces, accelerators, and real-time processing. Physical Package Ball Grid Array (FCBGA) construction supports dense board connections, while the exposed thermal and power characteristics require careful PCB layout. Principal device attributes include two ARM Cortex-A9 processor cores, 125K logic cells, CoreSight support, 667 MHz processor operation, and the 676-FCBGA package. The processing system also supplies embedded memory and external-memory interfaces, while the programmable logic permits hardware-specific data paths to be implemented in parallel with software tasks. These features make the device suitable for embedded control, industrial automation, communications, image processing, and instrumentation systems. The architecture separates control-heavy sequencing from deterministic parallel work. Software can manage communications, control flow, and configuration, while programmable logic can implement filters, protocol engines, custom interfaces, or data acquisition channels. This division can reduce external component count compared with a processor and separate FPGA architecture, although firmware, HDL, clocking, memory, and power design must be developed as one integrated system. Typical Zynq-7000 uses include industrial control platforms, networked gateways, embedded vision, test and measurement equipment, and communications infrastructure. The dual-core processing system supports concurrent software workloads, while the programmable fabric provides application-specific I/O and acceleration. Designers should select board-level memory, power rails, clock sources, and I/O standards to match the intended reference design rather than treating the SoC as a standalone component. A critical integration consideration is that a 676-FCBGA device requires a dense, multilayer PCB with controlled impedance, via-in-pad or via-beneath-pad arrangements where prescribed, and careful power and ground-plane design. Decoupling must follow the AMD reference design, and thermal performance depends on the package substrate, board copper, airflow, and the selected device speed and temperature grade. This product record combines the exact orderable MPN, package identification, architecture-level characteristics, drop-in family candidates, and practical integration guidance. It also distinguishes performance-grade and temperature-grade alternatives that preserve the 676-ball footprint while helping engineers evaluate qualification, timing, and availability requirements before releasing a production BOM.

詢價 聯絡我們
XC7Z030-1SB485I - 667MHz Zynq SoC | AMD | Industrial Control
XC7Z030-1SB485I

XC7Z030-1SB485I - 667MHz Zynq SoC | AMD | Industrial Control

The AMD XC7Z030-1SB485I is a Zynq-7000 Kintex-7 system-on-chip with dual ARM Cortex-A9 MPCore processors operating at 667 MHz, 125,000 FPGA logic cells, and a 484-FCBGA package measuring 19 x 19 mm. The device combines programmable FPGA logic, ARM processing, memory interfaces, and connectivity in one high-integration package. A Zynq SoC is a heterogeneous embedded-processing device: the hard processor system executes operating-system and application software, while the Kintex-7 FPGA fabric implements parallel hardware, custom interfaces, accelerators, and real-time logic. This combination allows control software and hardware data paths to operate within one device, reducing board-level component count compared with separate FPGA and processor solutions. Key verified features include two ARM Cortex-A9 MPCore processors, CoreSight debug support, a 667 MHz processor clock, and approximately 125K Kintex-7 logic cells. The supplied distributor records identify the package as 484-FCBGA in a 19 x 19 mm body. Additional device details such as I/O count, memory-interface ratings, power rails, and automotive qualification are not supplied in the verified data and must be confirmed in the manufacturer documentation before schematic release. The FPGA fabric is suitable for parallel image-processing stages, protocol conversion, data acquisition, control logic, and hardware acceleration. The ARM subsystem supports embedded Linux, real-time operating systems, control loops, networking stacks, and supervisory software. Designers can partition functions between software and programmable logic according to latency, parallelism, and update requirements rather than forcing every operation into either domain. Typical implementations include industrial controllers, machine vision, test and measurement systems, embedded networking equipment, communications infrastructure, and high-performance embedded appliances. Programmable FPGA logic can accelerate filtering, protocol framing, or interface conversion, while the ARM subsystem manages configuration, telemetry, control, and application services. A new design should begin with the exact AMD device documentation and pin-level package information. The BGA footprint requires dense escape routing, many decoupling connections, careful power planning, and manufacturing controls capable of handling the 484-contact package. Because those electrical and layout requirements are not present in the supplied snippets, engineers must obtain the official datasheet, package files, schematic guidance, and board-design requirements before layout. This page combines verified distributor specifications and sourcing information with structured engineering guidance. It distinguishes confirmed facts from unavailable parameters, avoiding invented memory, power, I/O, and compliance claims while identifying the exact resources needed to qualify a production design.

詢價 聯絡我們
XC7Z030-1SBG485C - 125K Logic Cell Zynq SoC | AMD
XC7Z030-1SBG485C

XC7Z030-1SBG485C - 125K Logic Cell Zynq SoC | AMD

The AMD XC7Z030-1SBG485C is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor, CoreSight debug capability, and 125K FPGA logic cells in a 484-pin FCBGA package measuring 19 mm by 19 mm. The integrated processor operates at 667 MHz, while the programmable logic fabric provides hardware acceleration for demanding embedded applications. A Zynq-7000 SoC is an FPGA and CPLD architecture that integrates programmable logic with a complete processing system on one silicon device. The ARM Cortex-A9 side executes operating-system software, networking protocols, and control code, while the Kintex-7 fabric implements parallel data paths, interfaces, signal processing, and other hardware-specific functions. This combination reduces the component count and board area compared with separate processors and FPGAs. The XC7Z030 device provides 125K logic cells and 130 I/O resources in the specified FCBGA package. Its dual Cortex-A9 processor runs at 667 MHz, supporting the Zynq-7000 family's combination of hard real-time control and software flexibility. CoreSight support adds dedicated debug visibility for processor and programmable-logic development, helping engineers isolate software faults, hardware transactions, and system-level integration issues. The XC7Z030 uses the Kintex-7 programmable fabric and provides approximately 47% more logic capacity than the XC7Z020 according to the device comparison information. That increase is valuable when a design needs more parallel processing resources without moving to the larger XC7Z045 or XC7Z100 devices. Logic density, package pinout, processor speed, memory requirements, and I/O allocation must nevertheless be checked against the complete board design before any replacement is approved. Typical uses include industrial control gateways, embedded network equipment, high-speed data acquisition, machine vision, communications infrastructure, and test systems requiring a deterministic programmable-logic pipeline alongside a Linux-capable processor. The architecture is particularly suitable when software controls the system while FPGA logic handles timing-critical sampling, protocol handling, or high-volume parallel computation. Board design must treat the 484-pin FCBGA as a high-density, fine-pitch assembly with demanding escape-routing, via-in-pad, and thermal-management requirements. Validate the exact SBG485 pin assignments against the AMD package-placement documentation, maintain power and ground-plane integrity, and plan test access before committing to the PCB layout. Software compatibility also depends on the selected device, board configuration, and toolchain. This page combines the verified device identity, package information, processor and logic resources, documented alternatives, and practical design guidance in a form intended to accelerate engineering evaluation and sourcing. It also highlights why package identity alone is insufficient to establish a valid replacement for a programmable SoC.

詢價 聯絡我們
XC7Z030-2FB484I - Zynq-7000 SoC 800MHz Kintex-7 FPGA 484-FCBGA | AMD
XC7Z030-2FB484I

XC7Z030-2FB484I - Zynq-7000 SoC 800MHz Kintex-7 FPGA 484-FCBGA | AMD

The AMD Xilinx XC7Z030-2FB484I is a Zynq-7000 family System-on-Chip (SoC) that integrates a dual-core ARM Cortex-A9 MPCore hard processor system with Kintex-7 based programmable logic on a single 28nm device, packaged in a 484-ball FCBGA (23x23 mm) and rated for the industrial -40C to +100C temperature range. The SoC combines a hardened processing subsystem (PS) running up to 800 MHz with a Kintex-7 fabric delivering 125K logic cells, making it a heterogeneous compute device for embedded vision, industrial control, and software-defined radio applications. The 'I' suffix indicates industrial temperature grade and the '2' speed grade denotes a mid-tier performance bin, balancing static timing margin against power consumption. What is a Zynq SoC? A Zynq-7000 System-on-Chip is a heterogeneous device that pairs ARM Cortex-A9 application processor cores with Xilinx Kintex-7 (or Artix-7) FPGA fabric through high-bandwidth AXI interconnects. Unlike a pure FPGA, the Zynq boots and runs C/C++ code natively while exposing programmable logic for hardware acceleration, custom peripherals, and parallel DSP pipelines. It sits in the hierarchy: Zynq-7000 -> SoC -> embedded processor + FPGA hybrid -> semiconductor device, and is widely used in embedded computing platforms including ZC702 evaluation boards and custom carrier cards. Key architectural features include dual Cortex-A9 cores with NEON SIMD and single/double precision floating point, ARM CoreSight debug, hardware block RAM (BRAM), DSP48E1 slices, multiplexed I/O (MIO) and extended MIO (EMIO), and integrated memory controllers supporting DDR3/DDR3L/LPDDR2. The Kintex-7 fabric provides 125K logic cells, approximately 9.4 Mb of block RAM, and DSP48E1 slices suitable for FIR filters, FFT engines, and high-throughput signal processing. The part integrates GTX (Gigabit Transceiver) hard IP for multi-gigabit serial links in the higher-density Zynq-7000 family variants. Typical applications include machine vision and video pipelines, software-defined radio (SDR) baseband, industrial motor control with EtherCAT, ADAS prototyping, medical imaging front-ends, and custom embedded compute platforms where Linux or RTOS runs on the Cortex-A9 while the FPGA fabric accelerates PCIe, custom I/O, or DSP functions. The 800 MHz Cortex-A9 frequency enables real-time control loops and multimedia workloads. Power-supply decoupling follows Xilinx ug583, and PCB signal-integrity routing follows ug583/ug587 guidance for the MIO/EMIO DDR interfaces. When designing with this part, ensure your Vivado Design Suite and Vitis IDE versions match the silicon revision listed in the device DNA register. Pin-compatible same-package Zynq-7000 variants allow migration up or down the family (Z-7010/Z-7015/Z-7020/Z-7030/Z-7035/Z-7045/Z-7100) on the same 484-ball FCBGA footprint, enabling platform reuse across SKUs. This page synthesizes drop-in package-compatible alternatives, parametric comparison data, and practical PCB design notes specific to the XC7Z030-2FB484I - context not assembled on any single distributor product page.

詢價 聯絡我們
XC7Z030-2FBG484E - 800MHz Dual-Core Zynq SoC | AMD
XC7Z030-2FBG484E

XC7Z030-2FBG484E - 800MHz Dual-Core Zynq SoC | AMD

The AMD XC7Z030-2FBG484E is a Zynq-7000 Kintex-7 system-on-chip combining two Arm Cortex-A9 processor cores with 125K FPGA logic cells in a 484-FCBGA package measuring 23 x 23 mm. The integrated processor subsystem operates at 800 MHz, while the programmable logic fabric supports hardware acceleration, custom interfaces, and concurrent control processing. A Zynq-7000 SoC is a heterogeneous programmable device that merges an ARM microprocessor subsystem with FPGA fabric on one silicon die. This system-on-chip hierarchy connects Arm Cortex-A9 processing, CoreSight debug support, programmable logic, dedicated DSP resources, memory interfaces, and high-speed I/O. Integrating these blocks reduces component count and allows software-controlled logic to respond to processor events without conventional external-FPGA communication overhead. Principal features include dual Arm Cortex-A9 MPCore processors, 800 MHz processing, 125K Kintex-7 logic cells, 400 DSP slices, CoreSight debug capability, and secure boot support. The 484-FCBGA package provides a high pin count for memory, networking, video, control, and industrial interface requirements. The E ordering suffix identifies the target part's extended-temperature configuration, while the -2 designation identifies its associated speed grade. The device's architecture allows a Linux-capable processor to manage operating-system workloads while FPGA logic handles time-critical data movement, filtering, image processing, protocol termination, or sensor acquisition. Dedicated DSP resources can accelerate fixed-point and floating-point operations without requiring a separate FPGA or DSP package. Programmable logic can also implement custom accelerators and deterministic I/O paths beside the processor subsystem. Typical applications include industrial machine vision, industrial control, medical imaging, networked communications, edge processing, robotics, and embedded test equipment. Its combination of 800 MHz Arm processing and 125K logic cells is especially useful where control software must coexist with parallel hardware pipelines. Secure boot is valuable for production systems that require controlled firmware and bitstream authorization. PCB design must follow the AMD package pinout, power, decoupling, and ball-grid-layout requirements carefully. A 484-FCBGA device requires a matched land pattern, controlled escape routing, and adequate power and ground-plane distribution. Use the manufacturer's package placement diagram and package device pinout files when assigning balls and validating continuity. This page combines the confirmed processor, logic, package, DSP, and feature data with practical selection guidance and engineering-focused comparisons. It also identifies temperature-grade and speed-grade alternatives in the same 484-FCBGA land pattern, helping engineers distinguish a genuine board-compatible substitution from an upgrade requiring different hardware or timing constraints.

詢價 聯絡我們
XC7Z030-2FBG484I - Zynq-7000 SoC, 125K Logic Cells | AMD
XC7Z030-2FBG484I

XC7Z030-2FBG484I - Zynq-7000 SoC, 125K Logic Cells | AMD

The AMD XC7Z030-2FBG484I is a Zynq-7000 family System-on-Chip (SoC) that integrates a dual-core ARM Cortex-A9 MPCore processing system with a Kintex-7 class programmable logic fabric. This device combines the flexibility of an FPGA with the performance of an embedded processor, making it ideal for a wide range of applications including software-defined radio, industrial automation, and automotive driver assistance systems. The device is housed in a 484-pin FCBGA package (23x23 mm) and operates over the industrial temperature range of -40°C to +100°C. A System-on-Chip (SoC) is an integrated circuit that consolidates all components of a computer or other electronic system into a single chip. The Zynq-7000 family specifically combines a hard processing system (PS) with programmable logic (PL), allowing designers to implement custom hardware accelerators alongside software applications. This architecture bridges the gap between traditional microprocessors and FPGAs, enabling high-performance, low-latency processing for demanding embedded applications. Key features of the XC7Z030-2FBG484I include 125,000 logic cells, a dual-core ARM Cortex-A9 processor running at up to 800 MHz, and support for 1.2V to 3.3V I/O standards. The device also includes 256 KB of on-chip memory, integrated PCIe, and multiple high-speed transceivers. These features provide a powerful and flexible platform for implementing complex digital systems. From a technical perspective, the XC7Z030-2FBG484I is fabricated using a 28nm process technology, which balances performance and power efficiency. The processing system includes a memory management unit, L1 and L2 caches, and a wide range of peripherals, while the programmable logic is based on the Kintex-7 architecture, offering high logic density and DSP capabilities. This combination allows for the implementation of sophisticated algorithms and interfaces. Typical applications for the XC7Z030-2FBG484I include software-defined radio, where the programmable logic handles baseband processing and the ARM cores run protocol stacks; industrial motor control, where the FPGA implements high-speed PWM and the processor handles communication; and medical imaging, where the device accelerates image processing algorithms. The device's high-speed transceivers also make it suitable for video and network processing. When designing with this device, careful attention must be paid to power supply decoupling and thermal management. The 484-pin FCBGA package requires a multi-layer PCB with dedicated power and ground planes. The device's power consumption can be significant, so a proper heatsink or active cooling solution may be necessary for high-performance applications.

詢價 聯絡我們
XC7Z030-2FBG676E - 800MHz Dual-Core Zynq SoC | AMD
XC7Z030-2FBG676E

XC7Z030-2FBG676E - 800MHz Dual-Core Zynq SoC | AMD

AMD XC7Z030-2FBG676E is a Zynq-7000 Kintex-7 system-on-chip with a dual-core ARM Cortex-A9 MPCore processor, 125K FPGA logic cells, an 800 MHz processor rating, and CoreSight debug support. The device is packaged in a 676-pin FCBGA measuring 27 x 27 mm, combining programmable logic, ARM processing, memory interfaces, and programmable I/O in one heterogeneous device. A Zynq-7000 SoC is a heterogeneous FPGA platform that integrates a hard ARM Cortex-A9 processing system with Xilinx 28 nm programmable logic. The processing system executes operating systems, networking stacks, control software, and user applications, while the programmable-logic section implements parallel datapaths, hardware accelerators, custom interfaces, and real-time signal processing. This combination allows designers to partition a design between software and programmable hardware without using separate processor and FPGA packages. Key features include 125K logic cells, an 800 MHz ARM Cortex-A9 MPCore configuration, CoreSight debugging, and Zynq-7000 Kintex-7 FPGA resources. The integration is useful when a design needs deterministic hardware pipelines alongside a conventional processor environment. External memory connectivity and peripheral functions depend on the selected Zynq configuration, so the device-specific datasheet should be used when assigning memory interfaces, dedicated pins, and power rails. The architecture supports Linux, real-time operating systems, bare-metal firmware, and mixed hardware/software workflows. The processor can control system-level tasks and launch applications, while FPGA logic can accelerate data movement, filtering, encoding, video processing, or protocol handling. CoreSight enables integrated debug visibility into the processor and programmable logic, reducing the number of separate instruments required during development. Typical applications include industrial control gateways, networked embedded systems, industrial vision, communications infrastructure, test equipment, and embedded video processors. The 676-ball package is intended for dense multilayer PCB layouts with careful power delivery, decoupling, and thermal management. Designers should also account for configuration storage, memory routing, high-speed differential I/O, and programming or boot-mode requirements. For a new design, preserve the target's 676-FCBGA land pattern and verify timing, power, and interface requirements before changing speed, temperature, or package suffixes. This page combines verified product facts, application guidance, replacement analysis, and design checks that help engineers evaluate the XC7Z030-2FBG676E beyond a basic distributor listing. The AMD Zynq-7000 product family combines an ARM Cortex-A9 processing system with 28 nm programmable logic, placing the device between conventional microprocessors and discrete FPGA systems. The XC7Z030-2FBG676E specifically combines a dual-core processor configuration, 125K logic cells, an 800 MHz rating, and a 676-pin FCBGA package. Its value lies in allowing control software and parallel hardware logic to share one device, package, and design flow. For industrial, communications, imaging, and test systems, this integration can reduce inter-chip data movement, simplify synchronization, and consolidate functions that would otherwise require several devices. Engineers should determine suitability from the complete AMD data sheet and package-pinout files because power rails, supported memory interfaces, dedicated pins, and high-speed I/O behavior are configuration-specific. A drop-in substitution also requires more than matching the ball count: the replacement should preserve the exact package, device architecture, speed-grade expectations, temperature grade, power behavior, and relevant I/O assignments. That validation is especially important for Zynq devices because suffix changes can affect speed, temperature range, or package-related qualification even when the basic FPGA and processor resources remain the same.

詢價 聯絡我們
XC7Z030-2FBG676I - 125K Cell Dual Cortex-A9 SoC | AMD
XC7Z030-2FBG676I

XC7Z030-2FBG676I - 125K Cell Dual Cortex-A9 SoC | AMD

AMD XC7Z030-2FBG676I is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor, CoreSight debug capability, and 125K FPGA logic cells, operating at 800 MHz in a 676-pin FCBGA package measuring 27 x 27 mm. The device combines programmable logic with an embedded application processor in one package, making it suitable for industrial control, communications, embedded vision, and software-defined radio systems. A Zynq-7000 SoC is a heterogeneous processing platform rather than a conventional FPGA or microcontroller alone. Its architecture integrates an Arm Cortex-A9-based hard processor subsystem with FPGA logic, programmable block RAM, DSP slices, high-speed serial links, and dedicated I/O. Software can run in the processor subsystem while time-critical filtering, interfaces, or protocol processing execute in parallel programmable logic. Key resources include 125K logic cells, 400 DSP slices, 265 block RAMs, and four GTX high-speed transceiver links according to the device and application data. The Arm subsystem provides dual Cortex-A9 processing with CoreSight support, while the FPGA fabric supports hardware acceleration and flexible peripheral integration. This combination is especially valuable when a design requires both high-level Linux or real-time software control and deterministic data-path processing. The FBG676 device uses a 676-pin flip-chip ball-grid-array package on a 27 x 27 mm substrate. AMD package-pinout resources specify separate package files in ASCII and CSV formats, which should be used when validating every ball assignment, power rail, high-speed differential pair, and exposed thermal land before PCB release. Typical applications include industrial motion and machine control, network appliances, test equipment, embedded cameras, communications infrastructure, and software-defined radio. In an SDR architecture, Cortex-A9 software can manage configuration and protocols while the FPGA fabric performs high-rate filtering and digital conversion. PCB design must account for numerous supply rails, high-speed transceiver routing, ball-grid-array escape routing, and package thermal performance. Use the AMD package files and datasheet power guidance to define layer transitions and decoupling, and verify the complete design against the pinout rather than relying only on package dimensions. This page consolidates the device identity, source-backed technical characteristics, same-package upgrade paths, comparison criteria, and application guidance to help engineers qualify the XC7Z030-2FBG676I before schematic capture and PCB layout.

詢價 聯絡我們
XC7Z030-2FF676I - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z030-2FF676I

XC7Z030-2FF676I - Dual Cortex-A9 Zynq-7000 SoC | AMD

AMD XC7Z030-2FF676I is a Zynq-7000 system-on-chip combining dual Arm Cortex-A9 MPCore processors with Kintex-7 FPGA logic in a 676-FCBGA package. The supplied distributor data identifies 125K logic cells, an 800 MHz processor operating frequency, and a 27 x 27 mm package, making the device suitable for embedded control, programmable logic, video processing, industrial automation, and communications systems. The FPGA fabric and hard processor operate within one package and share memory and programmable interfaces. A system-on-chip is an integrated semiconductor that combines a programmable logic device with one or more hard processors. In the Zynq-7000 hierarchy, the FPGA fabric belongs to the Kintex-7 family, while the processor subsystem uses dual Arm Cortex-A9 MPCore technology. This integration reduces the number of separate devices and interconnects required for a processor-plus-FPGA design, but software, power delivery, thermal management, and board-level validation remain substantial engineering tasks. The XC7Z030 device provides 125K logic cells and an 800 MHz CPU according to the verified AMD and distributor listings. Its integrated 676-FCBGA package supports high-density connections among the programmable logic, processors, memory interfaces, and external I/O. The -2 designation identifies the device speed grade, while the final I suffix identifies the industrial-temperature ordering variant. Exact core voltage limits, memory data rates, transceiver capabilities, and detailed I/O characteristics must be confirmed in the AMD Zynq-7000 SoC datasheet and package documentation. The integrated FPGA fabric can accelerate parallel workloads such as image preprocessing, protocol handling, sensor data acquisition, and deterministic control pipelines. The dual Cortex-A9 subsystem is better suited to operating systems, networking stacks, control software, and human-interface logic. Designers can assign workloads between software and programmable logic, although the exact partition depends on timing, memory bandwidth, power, and tool-flow constraints. Typical applications include industrial machine vision, industrial automation controllers, networked embedded gateways, test and measurement systems, communications equipment, and high-performance embedded processing. In each case, the benefit comes from combining general-purpose Linux or bare-metal software with hardware parallelism in one device. A new design should still verify software support, memory-device compatibility, external clock requirements, and available board resources. The primary design consideration is power delivery to a large FCBGA device. Multiple voltage rails, high-current paths, decoupling, thermal vias, controlled-impedance routing, and a multilayer PCB are normally required. Designers should not infer complete pin compatibility or performance from a distributor family listing without reviewing the AMD package pinout files and comparing every power, ground, and signal connection. This page consolidates the verified package, processor, logic-cell, frequency, pricing, and sourcing information with engineering guidance and a transparent comparison of same-family alternatives. It also distinguishes verified facts from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and design reviews before committing a new PCB.

詢價 聯絡我們
XC7Z030-2FFG676E - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z030-2FFG676E

XC7Z030-2FFG676E - Dual Cortex-A9 Zynq-7000 SoC | AMD

AMD/Xilinx XC7Z030-2FFG676E is a programmable system-on-chip combining a dual-core Arm Cortex-A9 processor with a Kintex-7 FPGA fabric, 125K logic cells, and an 800 MHz processor clock in a 676-ball FCBGA package measuring 27 x 27 mm. The device also integrates CoreSight debugging and programmable logic for embedded control, signal processing, and hardware acceleration. A Zynq-7000 SoC belongs to the FPGA & CPLD category while also functioning as a heterogeneous microprocessor-plus-logic device. Its Arm processing subsystem executes operating systems, networking stacks, and control software, while the FPGA fabric implements parallel datapaths, custom interfaces, and real-time signal-processing functions. This combination creates a single-chip platform for systems that otherwise might require a separate processor and programmable logic device. The XC7Z030-2FFG676E provides two Arm Cortex-A9 MPCore processors, 125K Kintex-7 logic cells, and an 800 MHz operating clock. Its programmable architecture allows designers to partition workloads between software and hardware. CoreSight support provides integrated debug visibility, while the broad fabric can accelerate functions such as video processing, packet handling, sensor fusion, control loops, and custom peripheral bridging without requiring a discrete FPGA. The FFG676 package provides 676 ball-grid contacts on a 27 x 27 mm square substrate and supports the compact board density required by industrial, communications, aerospace, and embedded-compute systems. Device-specific electrical characteristics, power rails, memory interfaces, and configuration limits must be implemented according to the AMD Zynq-7000 data sheet. Because the FCBGA package contains many power, ground, high-speed, and configuration balls, PCB escape routing, layer transitions, and thermal management require careful implementation. Typical applications include industrial automation controllers, industrial Ethernet and network equipment, embedded vision systems, communications infrastructure, test and measurement platforms, and high-performance embedded Linux products. The Arm subsystem is appropriate for control-plane software, while FPGA resources can accelerate parallel data movement or implement deterministic hardware functions beside the processor. A sound design begins with the AMD package pinout file and the Zynq-7000 data sheet, then validates power sequencing, configuration interfaces, memory topology, clocking, and differential I/O against the selected board stack-up. Because this device combines software execution with high-speed programmable logic, thermal design, signal integrity, and embedded software bring-up should be planned together rather than treated as independent tasks. This product overview consolidates the exact device identity, package characteristics, processor and logic resources, alternative-part constraints, and practical implementation considerations needed for initial design selection. It also distinguishes verified catalog attributes from engineering details engineers must confirm in the family documentation and their specific reference design.

詢價 聯絡我們
XC7Z030-2FFG676I - Dual Cortex-A9 Zynq SoC | AMD
XC7Z030-2FFG676I

XC7Z030-2FFG676I - Dual Cortex-A9 Zynq SoC | AMD

The AMD XC7Z030-2FFG676I is a Zynq-7000 programmable SoC integrating a dual-core Arm Cortex-A9 MPCore processing system with a Kintex-7 FPGA fabric, 125K logic cells, an 800 MHz processor frequency, and a 676-ball FCBGA package measuring 27 x 27 mm. This combination places general-purpose Linux-capable processing and programmable hardware acceleration in one device. A Zynq SoC is a heterogeneous system-on-chip that combines an Arm processing system, programmable logic, memory controllers, and fixed-function peripherals. The processing subsystem executes operating systems, control software, and network applications, while the FPGA fabric implements parallel datapaths, custom interfaces, signal processing, and hardware acceleration. This architecture offers more flexibility than a fixed ASIC while reducing the component count associated with separate processors and FPGAs. The XC7Z030 device provides 125K programmable logic cells and an 800 MHz dual-core Arm Cortex-A9 configuration. Its programmable fabric supports parallel data processing and custom peripheral functions, while the ARM subsystem handles sequential software tasks. CoreSight debug capabilities support development workflows that combine instruction-level tracing, hardware visibility, and programmable-logic debugging. The -2 speed designation and industrial-temperature suffix organize the device for design planning, although detailed operating limits must be checked in the AMD data sheet. The 676-FCBGA package provides 676 electrical contacts and exposes the SoC's high-performance interfaces. Because this is a complex mixed-signal and high-speed programmable package, PCB construction, power planning, decoupling, and ball-escape routing are critical. Designers should follow the AMD package pinout, design guidelines, and power-estimation guidance rather than treating the BGA as a generic land pattern. Differential clocks, high-speed memory interfaces, and MGT transceivers require especially careful return-path and reference-plane design. Typical uses include industrial control, industrial networking, machine vision, video processing, communications equipment, embedded Linux systems, and sensor-processing platforms. The dual-core processor is suitable for an operating system and real-time tasks, while FPGA logic can accelerate filtering, protocol handling, image pre-processing, or custom interfaces. External DDR memory, nonvolatile storage, clock sources, transceivers, and power regulators are normally required around the SoC. The primary design trade-off is integration against implementation effort. Consolidating processor and FPGA functions reduces board-level interconnects and can simplify system partitioning, but firmware, HDL, interconnect constraints, and BGA layout must be planned together. Verify power sequencing, decoupling, memory topology, and transceiver requirements early because corrections are substantially harder after routing. This page combines the exact device identity, package characteristics, engineering application guidance, comparison parameters, and verified drop-in candidates. It also identifies compatibility questions that require confirmation against the AMD data sheet and package-placement diagram before any redesign is approved.

詢價 聯絡我們
XC7Z030-2SB485I - Zynq-7000 SoC FPGA 125K 800MHz | AMD
XC7Z030-2SB485I

XC7Z030-2SB485I - Zynq-7000 SoC FPGA 125K 800MHz | AMD

The AMD Xilinx XC7Z030-2SB485I is a Zynq-7000 system-on-chip FPGA integrating a dual-core ARM Cortex-A9 processor with 125K Kintex-7 logic cells in a 484-FCBGA package. The device operates with an indicated processor frequency of 800MHz and is identified as an industrial-temperature, speed-grade-2 SoC FPGA. It combines programmable logic, hard processor peripherals, CoreSight debug support, memory interfaces, and programmable I/O in one integrated device. The 484-FCBGA package measures 19 x 19 mm according to distributor listings. A Zynq-7000 SoC is a heterogeneous FPGA platform rather than a conventional microcontroller or standalone FPGA. Its ARM Cortex-A9 processing subsystem executes software, operating systems, control code, and network protocols, while the Kintex-7 FPGA fabric implements parallel data processing, custom interfaces, accelerators, and timing-critical logic. This combination makes the device useful when a product needs more deterministic hardware assistance than a general-purpose processor can provide without adding a separate FPGA package. The XC7Z030-2SB485I provides 125K logic cells, an 800MHz listed device frequency, dual ARM Cortex-A9 MPCore processing, and CoreSight system-on-chip functionality in the 484-FCBGA (19 x 19 mm) package. These headline features position the part between smaller Zynq-7000 devices and larger Kintex-7 FPGA implementations. The integrated processor supports software-controlled workflows, while programmable logic can accelerate parallel tasks or provide custom peripheral connectivity. Its architecture is useful for industrial automation, machine vision, industrial networking, embedded control, communications gateways, and test equipment. In a machine-vision controller, for example, the programmable logic can acquire and pre-process image data while the ARM subsystem handles higher-level control. In a communications gateway, software can manage protocols and networking while dedicated fabric logic handles deterministic data movement or custom interfaces. Design decisions must account for the large BGA package, high pin count, multilayer PCB requirements, power integrity, thermal performance, and the complexity of programming both the FPGA fabric and processor subsystem. Because the verified data supplied for this part does not include complete power, I/O, memory-interface, temperature-range, pinout, or compliance tables, those values remain designated for datasheet confirmation. This page distinguishes confirmed distributor information from parameters requiring verification in AMD's official Zynq-7000 documentation. This page combines verified distributor availability, a same-footprint regional source-code comparison, practical application guidance, and design cautions that are not consolidated in a single distributor listing. It is intended to accelerate component selection while directing engineers to the authoritative AMD datasheet and package pinout resources before layout release.

詢價 聯絡我們
XC7Z030-2SBG485E - 800MHz Zynq-7000 SoC | AMD/Xilinx
XC7Z030-2SBG485E

XC7Z030-2SBG485E - 800MHz Zynq-7000 SoC | AMD/Xilinx

AMD/Xilinx XC7Z030-2SBG485E is a Zynq-7000 programmable SoC combining a dual-core ARM Cortex-A9 MPCore processor at 800 MHz with a Kintex-7 FPGA fabric containing 125K logic cells in a 484-FCBGA package measuring 19 mm by 19 mm. The integrated system-on-chip architecture combines hard processor logic, programmable logic, CoreSight debug support, and programmable I/O in one device. A Zynq-7000 SoC is an adaptive SoC that combines an ARM microprocessor system with FPGA fabric. This hierarchy places the device between a general-purpose microprocessor and a conventional FPGA, allowing software-controlled functions and hardware-accelerated datapaths to share one package. Unlike a separate processor and FPGA, the integrated architecture can provide a lower-latency interface between software and programmable logic while reducing board-level component count. The XC7Z030-2SBG485E provides two ARM Cortex-A9 processor cores operating at 800 MHz, 125K FPGA logic cells, and 256 KB of on-chip memory according to the AMD product listing. Its speed-grade-2 suffix identifies the performance grade, while the extended-temperature suffix identifies its environmental grade. The device also includes CoreSight technology for processor and system debugging. These characteristics make it suitable for embedded control, industrial automation, communications equipment, instrumentation, and mixed software-and-logic systems. The Zynq architecture separates the hard processor system from the programmable FPGA resources. Software executes in the ARM processing environment, while designers can implement parallel datapaths, custom interfaces, accelerators, and control logic in the FPGA fabric. The integrated device is particularly useful when deterministic data movement, high-throughput parallel processing, or direct access between software and hardware is important. Designers should use AMD development tools and generated constraints to validate placement, routing, timing, and board-level connectivity. Typical designs include industrial gateways, factory automation controllers, test and measurement platforms, video-processing systems, embedded servers, and communication equipment. The dual Cortex-A9 configuration supports multitasking and control software, while the 125K logic cells allow custom hardware acceleration or interface consolidation. Compared with a processor-only design, the FPGA resources can execute parallel operations without depending on general-purpose software timing. PCB implementation requires careful attention to the 484-FCBGA layout, power rails, decoupling, clocking, and high-speed escape routing. Place input and output capacitors close to their associated device pins, use the manufacturer reference design as the baseline for stack-up and power planning, and inspect all XDC constraints for pin placement and timing. The 19 mm by 19 mm package also demands thermal via placement and adequate copper area for heat dissipation. This product page combines manufacturer and distributor technical facts with practical design guidance, package references, application analysis, and validated drop-in alternatives. It is intended to help engineers assess the XC7Z030-2SBG485E, compare it with same-package speed and temperature variants, and plan a robust Zynq-7000 PCB implementation.

詢價 聯絡我們
XC7Z030-2SBG485I - Zynq-7000 SoC, 125K Logic Cells | AMD
XC7Z030-2SBG485I

XC7Z030-2SBG485I - Zynq-7000 SoC, 125K Logic Cells | AMD

The AMD XC7Z030-2SBG485I is a Zynq-7000 family System-on-Chip (SoC) that integrates a dual-core ARM Cortex-A9 MPCore processing system with a Kintex-7 class programmable logic fabric. This device combines the flexibility of an FPGA with the performance of an embedded processor, making it ideal for a wide range of applications including automotive, medical, and industrial systems. The device is housed in a 484-ball FCBGA package (19x19 mm) and operates at a maximum frequency of 800 MHz. A System-on-Chip (SoC) is an integrated circuit that consolidates all components of a computer or other electronic system into a single chip. The Zynq-7000 family specifically merges a hard ARM-based processing system (PS) with programmable logic (PL), allowing designers to implement custom hardware accelerators alongside software applications. This architecture enables high-performance, low-latency processing that is not achievable with traditional microprocessors or FPGAs alone. Key features of the XC7Z030-2SBG485I include 125,000 logic cells, dual ARM Cortex-A9 cores running at 800 MHz, and a 28nm process technology. The device supports a wide range of I/O standards and includes high-speed transceivers for serial communication. The 'I' suffix indicates an industrial temperature grade, with an operating range of -40°C to +100°C, making it suitable for harsh environments. From a technical perspective, the Zynq-7000 architecture provides a high-bandwidth interconnect between the PS and PL, enabling efficient data transfer. The device includes a memory management unit (MMU) for the ARM cores, as well as a rich set of peripherals including USB, Ethernet, and SPI. The programmable logic can be configured to implement custom peripherals, DSP blocks, or even soft-core processors, offering unparalleled design flexibility. Typical applications for the XC7Z030-2SBG485I include software-defined radio, motor control, image processing, and automotive driver assistance systems. The combination of a powerful processor and reconfigurable logic makes it an excellent choice for systems that require both high-level control and real-time signal processing. When designing with this device, careful attention must be paid to power supply decoupling and thermal management. The FCBGA package requires a well-designed PCB with adequate ground planes and thermal vias to ensure reliable operation at high temperatures.

詢價 聯絡我們
XC7Z030-3FBG484E - 1GHz Dual-Core Zynq SoC | AMD
XC7Z030-3FBG484E

XC7Z030-3FBG484E - 1GHz Dual-Core Zynq SoC | AMD

The AMD XC7Z030-3FBG484E is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with programmable Kintex-7 FPGA logic, 125K logic cells, and a 1 GHz processor clock in a 484-pin FCBGA package measuring 23 mm by 23 mm. The device also integrates CoreSight debug support, unified memory, and configurable programmable logic for processor-centric embedded systems. A Zynq-7000 SoC is a heterogeneous programmable semiconductor that combines an Arm processor subsystem with FPGA fabric in one device. The processor provides software execution, operating systems, networking stacks, and application control, while the programmable logic implements custom accelerators, interfaces, protocol logic, and time-critical datapaths. This integration places the SoC in the FPGA and SoC hierarchy while providing more flexibility than a fixed-function application processor. The XC7Z030 configuration provides 125K FPGA logic cells and a 1 GHz dual-core Arm Cortex-A9 processing subsystem. Its 484-FCBGA package supports high-density power, ground, and I/O connectivity in a 23 mm by 23 mm footprint. The product is identified for automotive applications, and a distributor listing also identifies the device as RoHS compliant. The published part code includes a speed-grade designation of -3 and an industrial -E temperature suffix. The integrated architecture allows hardware-assisted functions to execute in parallel with the Arm processors rather than forcing every operation through software. This can improve throughput for image processing, control loops, communications, data acquisition, and interface bridging. Processor-to-PL logic connectivity also reduces the need for external glue logic, although final performance depends on the design, memory interface, clocking, and software architecture. Typical implementations include industrial control, machine vision, networking equipment, test and measurement systems, embedded analytics, and automotive electronics. In a machine-vision controller, for example, the Cortex-A9 side can run control software while FPGA fabric accelerates deterministic acquisition or image-processing pipelines. In an industrial controller, programmable logic can implement fieldbus interfaces, data acquisition, and safety-adjacent timing functions alongside a Linux or real-time software stack. PCB implementation requires careful treatment of the 484-FCBGA package, including an escape-routing strategy, layer-stack planning, and dense via arrays beneath the device. The power architecture must supply the processor and programmable-logic rails with adequate transient response because processor activity can create fast current changes. Pin assignment, power sequencing, decoupling, and package-specific escape routing should be based on the official AMD Zynq-7000 documentation. This product record combines the exact manufacturer and distributor identity of the XC7Z030-3FBG484E with package, processor, logic-capacity, frequency, and application guidance. It also distinguishes documented same-footprint alternatives from broader Zynq devices whose packages differ, helping engineers make package-aware design decisions before committing to a PCB layout.

詢價 聯絡我們
XC7Z030-3FBG676E - Dual Cortex-A9 Zynq SoC | AMD
XC7Z030-3FBG676E

XC7Z030-3FBG676E - Dual Cortex-A9 Zynq SoC | AMD

The AMD XC7Z030-3FBG676E is a Zynq-7000 Kintex-7 system-on-chip with two ARM Cortex-A9 MPCore processors, 125K logic cells, a 1 GHz processor operating frequency, CoreSight debug support, and a 676-ball FCBGA package measuring 27 x 27 mm. It combines programmable FPGA logic with a dual-core Arm processing system and integrated programmable logic on one device. A Zynq system-on-chip belongs to the FPGA and CPLD product hierarchy while also integrating a microprocessor subsystem and programmable peripheral logic. Unlike a discrete processor paired with a separate FPGA, the Zynq architecture allows hardware accelerators, interfaces, and control logic to be implemented in the programmable fabric while the Arm subsystem executes operating-system and application software. This combination is useful when designers need both software flexibility and deterministic hardware acceleration. Key features include the dual-core ARM Cortex-A9 MPCore subsystem, CoreSight debugging capability, 125K FPGA logic cells, and a 1 GHz advertised processor frequency. The integrated architecture can reduce inter-device communication requirements by placing processor-facing peripherals, custom interfaces, and accelerators close to the Arm cores. The 676-FCBGA package also supports the high pin count needed by a complex mixed processor-and-logic device. The XC7Z030 belongs to the Zynq-7000 product family and combines an Arm Cortex-A9 MPCore processing system with Kintex-7 FPGA logic. Its programmable resources can support parallel datapaths, protocol handling, video or image pipelines, signal processing, and custom accelerators. Developers can partition workloads between software running on the Arm processors and dedicated hardware implemented in the FPGA fabric, allowing hardware-specific tasks to execute concurrently. Typical applications include industrial control, networked communications, machine vision, video processing, embedded data acquisition, test equipment, and high-performance embedded systems. The device is particularly appropriate when deterministic data movement, parallel computation, or low-latency peripheral interfacing is required alongside a conventional operating environment and software development flow. PCB design requires careful attention to the 676-ball package, power delivery, decoupling, signal integrity, and thermal performance. Use the AMD package pinout files and Zynq-7000 SoC Technical Reference Manual when assigning ball assignments and planning board escape routing. Validate power sequencing, thermal conditions, high-speed memory interfaces, and differential I/O against the device-specific guidance before fabrication. This page combines the manufacturer data-sheet reference, current component listings, package details, speed-grade alternatives, and application-focused design guidance. It is structured to help engineers compare the exact XC7Z030-3FBG676E configuration, assess whether a closely related Zynq part can reuse an existing 676-ball design, and plan the hardware and software work required for a production embedded design.

詢價 聯絡我們
XC7Z030-3FFG676E - Dual-Core Zynq-7000 SoC | AMD
XC7Z030-3FFG676E

XC7Z030-3FFG676E - Dual-Core Zynq-7000 SoC | AMD

The AMD/Xilinx XC7Z030-3FFG676E is a Zynq-7000 Kintex-7 system-on-chip that combines a dual-core Arm Cortex-A9 MPCore processor with CoreSight debug technology and Kintex-7 FPGA fabric. The device provides 125K logic cells, a maximum processor clock of 1 GHz, and a 676-ball FCBGA package measuring 27 x 27 mm. Its integrated architecture places a programmable processor system and FPGA fabric in one package, allowing hardware acceleration, parallel processing, and flexible peripheral interfacing in a single device. A Zynq-7000 SoC belongs to the FPGA & CPLD product hierarchy and combines an Arm application processing unit with programmable logic. The ARM Cortex-A9 cores execute operating-system-level software, networking stacks, and control code, while the Kintex-7 fabric implements hardware accelerators, custom interfaces, signal processing, and time-critical logic. This combination removes much of the complexity associated with separate processors and FPGAs while retaining software programmability and hardware-level parallelism. The XC7Z030-3FFG676E is identified as the -3 speed-grade device and operates with an extended-temperature designation. Its 125K logic-cell Kintex-7 fabric targets applications that need more programmable resources than small microcontroller-based logic devices while avoiding the cost and complexity of a large ASIC. The 1 GHz processor specification and CoreSight integration support a unified development flow spanning software, embedded Linux, real-time operating systems, and hardware debugging. Typical uses include industrial machine vision, network and telecom equipment, industrial Ethernet gateways, high-speed data acquisition, software-defined radio, embedded analytics, and test-and-measurement systems. The dual-core processor handles control planes and network services, while FPGA fabric can accelerate parallel algorithms or implement deterministic interfaces. Common applications also include radar, aerospace, and defense processing systems where programmable logic and real-time software must coexist. The 676-ball FCBGA package requires a dense multilayer PCB with controlled impedance routing, careful power-plane design, and thermal management appropriate for a large programmable SoC. Use the AMD package placement diagram and the Zynq-7000 device pinout files when assigning ball locations. Programming the device requires the corresponding Xilinx or AMD hardware toolchain and device support for the exact speed, package, and temperature identifiers. This page combines the verified device identity, package information, procurement references, and engineering guidance with family-level selection criteria and drop-in alternatives. It is intended to help engineers evaluate clocking, memory interfaces, I/O, thermal requirements, PCB complexity, and software compatibility before committing a 676-ball FCBGA design to production.

詢價 聯絡我們
XC7Z030-3SBG485E - 1GHz Zynq-7000 SoC FPGA | AMD
XC7Z030-3SBG485E

XC7Z030-3SBG485E - 1GHz Zynq-7000 SoC FPGA | AMD

The AMD XC7Z030-3SBG485E is a Zynq-7000 all-programmable system-on-chip integrating a dual-core ARM Cortex-A9 MPCore processing system with Kintex-7 FPGA logic, CoreSight debug support, 125,000 logic cells, and a 1 GHz processor operating point in a 484-ball FCBGA package measuring 19 mm by 19 mm. It combines hard real-time processing-system resources with programmable logic for protocol bridging, hardware acceleration, image processing, control, and high-performance embedded applications. A Zynq-7000 SoC belongs to the FPGA and CPLD category while combining a processor-based subsystem with programmable logic. The processing system executes software through dual ARM Cortex-A9 cores, while the FPGA fabric implements parallel datapaths, custom interfaces, fixed-function accelerators, and timing-critical logic. This heterogeneous architecture can reduce external component count compared with separate processor and FPGA designs, although software, power, clocking, and thermal validation remain essential. Key features include 125,000 FPGA logic cells, a 1 GHz Cortex-A9 performance designation, dual-core ARM Cortex-A9 MPCore integration, CoreSight debug capability, and a compact 484-ball FCBGA package. The processor subsystem and programmable logic share access to memory and high-speed input/output resources, allowing designs to partition functions between sequential software and parallel hardware according to workload, latency, power, and real-time requirements. The -3 designator identifies the 1 GHz speed grade, while SBG485 identifies the 484-ball FCBGA configuration and E identifies the specified device grade. The 19 mm by 19 mm package has a 0.8 mm ball pitch and requires a dense, multilayer PCB with careful power delivery, decoupling, ball-by-ball escape routing, and thermal design. Designers should use the AMD package pinout files and Zynq-7000 technical documentation when assigning every power, ground, clock, configuration, processor, and programmable-logic ball. Typical applications include industrial control, robotics, machine vision, network equipment, sensor processing, test and measurement, communications infrastructure, and embedded systems that benefit from combining Linux or real-time software with FPGA acceleration. The dual-core processor handles control-plane software, operating systems, communications, and configuration tasks, while programmable logic can implement high-throughput data paths, custom serial interfaces, video pipelines, or hardware accelerators. A primary design consideration is power-domain sequencing. The processing system, programmable logic, memory interfaces, transceivers, and I/O supplies have distinct requirements, so rails should be enabled in the manufacturer-recommended order. Decoupling, independent voltage rails, clocking, JTAG, device configuration, and thermal management should be implemented according to the AMD Zynq-7000 design guidance before the PCB is released. This page combines the exact XC7Z030-3SBG485E identity, package information, documented alternatives, application guidance, and engineering-focused design notes. It also distinguishes verified same-package options from variants that use different packages, helping engineers avoid treating merely similar Zynq devices as true drop-in replacements.

詢價 聯絡我們
XC7Z035-1FBG676C Dual-Core Zynq SoC | AMD/Xilinx
XC7Z035-1FBG676C

XC7Z035-1FBG676C Dual-Core Zynq SoC | AMD/Xilinx

AMD/Xilinx XC7Z035-1FBG676C is a programmable system-on-chip combining a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug support and a Kintex-7 FPGA fabric. The device provides 275K logic cells, operates at 667 MHz, and is packaged in a 676-pin FCBGA measuring 27 x 27 mm. Its integrated architecture combines hardware programmable logic with a general-purpose processor subsystem. A Zynq-7000 SoC is a heterogeneous programmable platform that integrates an ARM Cortex-A9-based processing system and Xilinx FPGA fabric on one semiconductor device. Within the product hierarchy, it is a system-on-chip, embedded processor FPGA, programmable logic device, and semiconductor. This integration can reduce the number of discrete components required when a design needs both application processing and flexible hardware acceleration. The XC7Z035 portion provides 275K logic cells for programmable interfaces, control logic, signal processing, and accelerator datapaths. Its dual-core ARM Cortex-A9 MPCore subsystem operates at 667 MHz and includes CoreSight debug capabilities. The 676-FCBGA package supports high-density pinout requirements for the Zynq-7000 family and is associated with a 27 x 27 mm body size in the product documentation. AMD documents the XC7Z035 in the Zynq-7000 SoC data sheet covering the XC7Z030, XC7Z035, and XC7Z045 families. A separate package placement document addresses XC7Z35-FBG676 and FFG676 devices, while the official package-pinout resource provides package files for design verification. These documents are important because processor performance alone does not establish PCB compatibility; speed grade, package marking, temperature designation, and ball assignments must also be checked. Typical uses include industrial control, machine vision, communications infrastructure, networked equipment, test and measurement systems, and embedded applications that combine Linux-capable processing with programmable hardware. The processor subsystem is suitable for operating systems, networking stacks, and control software, while the FPGA fabric can implement deterministic parallel datapaths, custom interfaces, or hardware-assisted acceleration. PCB design should preserve the 676-FCBGA land pattern, power and ground distribution, and decoupling arrangement defined by the AMD documentation. Because the device combines a processor system with programmable I/O, careful separation of sensitive clock, transceiver, and high-speed interface routing is essential. Configuration storage, startup sequencing, bank-voltage constraints, and the selected design tools must also be validated before production release. This page combines the verified device identity, package details, family documentation, pricing evidence, application guidance, and same-package migration options into an engineering-focused reference. It also highlights the verification steps needed when considering an FPGA or SoC replacement, where package compatibility alone does not guarantee identical software timing, power behavior, configuration, or lifecycle requirements.

詢價 聯絡我們
XC7Z035-1FBG676I - 667MHz Zynq SoC FPGA | AMD
XC7Z035-1FBG676I

XC7Z035-1FBG676I - 667MHz Zynq SoC FPGA | AMD

The AMD XC7Z035-1FBG676I is a Zynq-7000 adaptive system-on-chip integrating a dual-core Arm Cortex-A9 MPCore processing system with CoreSight debug, a Kintex-7 FPGA fabric, 275,000 logic cells, and a 667 MHz processor clock in a 676-FCBGA package measuring 27 x 27 mm. Its operating temperature range is -40°C to +100°C, and the industrial suffix identifies a temperature-qualified assembly for demanding embedded and industrial systems. A Zynq-7000 SoC belongs to the FPGA & CPLD hierarchy and combines a hardware adaptive SoC architecture with programmable logic. Unlike a standalone microcontroller, the device allows ARM software and FPGA fabric to operate within one chip while communicating through dedicated interfaces. This heterogeneous architecture supports concurrent control processing, hardware data processing, signal acquisition, communications, and real-time decision-making without requiring separate processor and FPGA packages. The device provides approximately 275,000 logic cells and 250 I/O in its largest configuration. A 667 MHz Cortex-A9 processor supports the embedded software side, while the Kintex-7 fabric handles parallel logic, high-speed interface functions, protocol acceleration, and timing-sensitive workloads. CoreSight provides integrated visibility for debugging the processing system, and the Zynq architecture supports a combination of Linux, real-time operating systems, bare-metal firmware, and hardware-assisted pipelines. The XC7Z035-1FBG676I uses a 676-ball flip-chip BGA package, making it appropriate for dense multilayer PCB layouts with high-density escape routing and controlled impedance requirements. Its industrial temperature qualification covers applications operating from -40°C through +100°C. The package combines the Arm processing system, programmable logic, memory interfaces, and general-purpose I/O in a single 27 x 27 mm component. Typical uses include industrial machine vision, test and measurement equipment, industrial networking, embedded video processing, communications infrastructure, and control systems that benefit from parallel hardware acceleration. Designers can assign time-critical filtering, protocol conversion, data acquisition, or interface bridging to the programmable logic while the Arm cores execute control software, operating systems, communications stacks, and supervisory functions. PCB implementation requires careful BGA escape routing, power and ground-plane design, decoupling, thermal management, and differential-pair routing. Use the AMD Zynq-7000 package pinout files referenced in the design documentation to assign every ball correctly. Confirm the selected DDR memory interface, transceivers, bank voltages, configuration method, and clocking requirements before schematic capture. This page combines the confirmed device identity, package, operating-temperature, lifecycle, and environmental information with practical implementation guidance. It also identifies same-footprint Zynq-7000 ordering options for engineering comparison while distinguishing speed, temperature, and extended-temperature qualification changes that must be checked before substitution.

詢價 聯絡我們
XC7Z035-1FFG676C - 667MHz Dual Cortex-A9 SoC FPGA | AMD
XC7Z035-1FFG676C

XC7Z035-1FFG676C - 667MHz Dual Cortex-A9 SoC FPGA | AMD

The AMD XC7Z035-1FFG676C is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 processor with 275K logic cells of FPGA fabric in a 676-ball FCBGA package measuring 27 x 27 mm. The integrated processor subsystem operates at 667 MHz, while the programmable logic section supplies parallel hardware acceleration, flexible interfaces, and dedicated processing resources within one device. A Zynq-7000 SoC belongs to the system-on-chip family, combining a hard microcontroller subsystem with programmable FPGA logic. This integration removes the need to place a separate processor and FPGA on the same board, while preserving software programmability through the Arm Cortex-A9 platform and hardware customization through Kintex-7 FPGA resources. The resulting architecture can accelerate data movement, filtering, encryption, image processing, and interface conversion without relying exclusively on sequential software execution. Key characteristics of the XC7Z035 include two Cortex-A9 processor cores, 667 MHz clocking, 275K logic cells, and support for CoreSight-based debug and trace visibility. The -1 device designation identifies the associated speed grade within the Zynq-7000 ordering system. The FFG676 designation identifies the 676-ball FCBGA package used by this ordering variant, with a stated package size of 27 x 27 mm. The programmable architecture makes this device suitable for industrial control, machine vision, network appliances, test equipment, communications infrastructure, and embedded edge systems. Designers can allocate deterministic tasks to FPGA logic while the operating system executes higher-level control, networking, or user-interface functions on the processor subsystem. Peripheral interfaces can therefore be implemented with predictable timing rather than depending entirely on interrupt-driven software servicing. Board design requires careful allocation of power, ground, high-speed transceiver, clocking, and processor debug resources. Use the AMD package-placement diagrams and Zynq-7000 data sheet to assign every ball before routing PCB traces. The 676-ball package also demands a fine-pitch PCB layout with controlled impedance and appropriate power-delivery networks. Selection should begin with the required processor software image, FPGA utilization, transceiver count, peripheral mix, operating temperature, and lifecycle expectations. Confirm that the chosen ordering variant satisfies all mechanical, electrical, and software requirements before committing the footprint. This page combines verified ordering details, package information, practical design guidance, and a structured comparison of same-family alternatives.

詢價 聯絡我們