產品(44,000+)

EP2AGZ350HF40I4G - Arria II GZ FPGA 350K LE | Intel
EP2AGZ350HF40I4G

EP2AGZ350HF40I4G - Arria II GZ FPGA 350K LE | Intel

The Intel EP2AGZ350HF40I4G is a high-density Arria II GZ FPGA delivering 350K logic elements with transceivers up to 6.375 Gbps, housed in a 1517-ball FBGA (HF40) package at industrial temperature grade. It belongs to Intel's (formerly Altera) Arria II GZ family, which targets high-performance, transceiver-rich applications such as high-end communications, broadcast, military, and DSP-intensive systems. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) that lets designers configure digital logic blocks, routing, and I/O after manufacture. FPGAs sit hierarchically within the broader semiconductor family: FPGA -> programmable logic -> logic ICs -> integrated circuits. Arria II GZ devices use a 40nm process, embed dedicated transceivers, DSP blocks, on-chip memory, and PLL/clock networks, and are SRAM-based so configuration must be loaded from external flash at each power-up. Key features include transceiver speeds up to 6.375 Gbps supporting CPRI, PCIe Gen1, SATA, and Serial RapidIO, an extensive DSP block fabric for high-precision fixed- and floating-point arithmetic, hard memory controllers, and a rich I/O mix that supports DDR3, LVDS, and SERDES. Industrial-grade parts (I4 suffix) operate from -40C to +100C junction temperature and are Pb-free/RoHS compliant. The device is typically paired with EPCQ configuration memory for autonomous boot. Architecturally, the Arria II GZ family uses a logic-element granularity optimized for register-rich designs, 8-input adaptive LUTs, dedicated 18x18 multipliers plus hard floating-point DSP blocks, and a clock network with up to 16 PLLs per device. The HF40 (FBGA-1517) package exposes the maximum I/O count and full transceiver count for this die, making it suitable for line-card designs with high I/O and SERDES density. Typical applications include telecom line cards with CPRI backhaul, military secure communications, video broadcast processing (e.g., 3G-SDI routing), high-channel-count DSP for radar and medical imaging, and ASIC-prototyping platforms that need 350K LEs of headroom. Its combination of transceivers and DSP blocks makes it a common choice for protocol-bridging and baseband processing designs. Designers should plan power architecture carefully because Arria II GZ FPGAs can draw tens of amps during configuration and dynamic operation; multiple decoupling rails (VCC, VCCA, VCCT, VCCPT) are required. Quartus II software with the Arria II device support is required for synthesis, place-and-route, and timing closure.

詢價 聯絡我們
EP2AGZ350HF40I4N - Arria II GZ FPGA 350K LE | Intel
EP2AGZ350HF40I4N

EP2AGZ350HF40I4N - Arria II GZ FPGA 350K LE | Intel

The Intel (formerly Altera) EP2AGZ350HF40I4N is a high-density Arria II GZ Field-Programmable Gate Array (FPGA) featuring 348,500 logic elements, 13,940 LABs, and 21,270,528 bits of embedded memory in a 1517-ball FC-FBGA package. Manufactured on a 40 nm process node with a 0.9 V core voltage, the device operates at up to 500 MHz and supports 734 user I/O pins with mixed-voltage standards including LVDS, LVPECL, and HSTL. An FPGA (Field-Programmable Gate Array) is a type of integrated circuit that contains an array of programmable logic blocks, interconnect fabric, and I/O cells that engineers can configure after manufacture. FPGAs occupy a unique tier in the semiconductor hierarchy - between general-purpose CPUs/DSPs and fixed-function ASICs - offering hardware-level parallelism, deterministic latency, and post-silicon design revision. Modern high-density FPGAs such as the Arria II GZ family add embedded transceivers, hard PCIe IP blocks, and dedicated DSP slices, positioning them as mid-range platforms between cost-optimized Cyclone series and high-end Stratix devices. The Arria II GZ family combines 8.5 Gbps transceivers, up to 12.5 Mbits of MLAB memory, and hard IP for PCIe Gen2 and external memory interfaces (DDR2/DDR3/QDRII+/RLDRAM II). Its transceivers support backplane, chip-to-chip, and SFP+/XFP optical interconnect with adaptive equalization and pre-emphasis, making the EP2AGZ350HF40I4N well suited to broadband wireless, broadcast video, and 40G/100G line-card prototyping. The 40 nm low-power (LP) process enables static power approximately 40% lower than prior 65 nm nodes, while preserving full transceiver and DSP performance. The 1517-ball flip-chip BGA provides abundant high-speed signal routing with controlled impedance, suitable for 8-lane Gen2 PCIe plus multiple DDR3 memory channels. Typical applications include 40G/100G Ethernet line cards, wireless backhaul baseband processing, broadcast video processing (3G-SDI, HD-SDI), ASIC prototyping, and high-performance DSP for medical imaging. The device also appears in defense radar signal processing and high-frequency trading acceleration. When designing with this part, follow Intel pin-out guidelines for flip-chip BGA decoupling, maintain 1.0 V core supply sequencing, and use the Quartus II design suite (13.0 or later) for synthesis. The 'I4' speed grade and industrial temperature range (-40C to +100C) ensure robust operation in harsh environments. This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes not consolidated in the manufacturer datasheet, giving engineers a single source for sourcing, replacement, and reference design decisions.

詢價 聯絡我們
EP2C15AF256A7N - 14,448 LEs, 402.58 MHz FPGA | Altera
EP2C15AF256A7N

EP2C15AF256A7N - 14,448 LEs, 402.58 MHz FPGA | Altera

Altera EP2C15AF256A7N is a Cyclone II field-programmable gate array with 14,448 logic elements, 152 user I/Os, a 402.58 MHz maximum device frequency, 1.2 V core supply, and a 256-LBGA package. It is a surface-mount programmable-logic device intended for embedded control, industrial, communications, automotive, and test applications. A field-programmable gate array is a semiconductor whose digital logic, memory, and I/O behavior are configured through a programmable bitstream. The EP2C15AF256A7N belongs to the Cyclone II FPGA family, placing it within the broader hierarchy of programmable-logic devices, FPGAs, programmable semiconductors, and digital integrated circuits. Its combination of logic density, device speed, embedded memory, and a large fine-pitch package supports designs requiring parallel data paths, control logic, and programmable interfaces. The device is manufactured using 90 nm CMOS technology and operates from a 1.2 V core supply. The A7N ordering suffix identifies the device grade and temperature option, while the 256 suffix denotes the 256-pin FBGA package. The automotive designation shown in the product listing indicates that the part is associated with automotive-grade ordering, but the exact qualification wording and temperature limits should be confirmed in the manufacturer documentation before production release. The 14,448 logic elements provide substantially more programmable capacity than small CPLDs and make the device suitable for multi-module control systems, protocol bridges, industrial controllers, and embedded test equipment. Its 152 I/O count is important when a design needs substantial parallel connectivity, although the exact usable I/O count depends on power-supply configuration, package balls, and the selected device variant. The 256-LBGA package creates a compact solution but requires careful PCB layout. Power and ground distribution, via-in-pad or via-adjacent decoupling, BGA escape routing, and thermal management are central to achieving reliable operation. Cyclone II FPGAs also require a supported programming and configuration flow, so software tool support, JTAG programming, and memory-interface compatibility should be checked early in the design cycle. This device is most appropriate when designers need a mid-density Cyclone II FPGA in the 256-LBGA package rather than a modern low-cost FPGA with a different package or pinout. For replacement decisions, validate the pinout, power rails, configuration scheme, JTAG behavior, and Quartus-compatible design constraints rather than relying only on the logic-element count. The related EP2C15AF256I8N and EP2C15AF256C6N parts share the device family and package identifiers, but their suffix-specific operating and qualification characteristics require direct comparison with the exact design requirements. This page provides a consolidated technical view of the EP2C15AF256A7N, including family positioning, application guidance, design considerations, and clearly identified sourcing information for engineers evaluating the device.

詢價 聯絡我們
EP2C15AF256C6N - 14,448-Cell 500 MHz FPGA | Altera
EP2C15AF256C6N

EP2C15AF256C6N - 14,448-Cell 500 MHz FPGA | Altera

The Altera EP2C15AF256C6N is a Cyclone II field-programmable gate array with 14,448 logic elements, 152 user I/O, a 500 MHz maximum operating frequency, and a 1.2 V supply in a 256-LBGA package. These specifications place the device between small programmable logic and larger FPGA solutions for cost-sensitive embedded designs requiring deterministic parallel processing. A field-programmable gate array is a reconfigurable digital semiconductor used to implement logic, state machines, interfaces, and parallel processing functions. The broader hierarchy is FPGA and CPLD, then programmable-logic semiconductor. Unlike fixed-function logic, an FPGA allows its hardware behavior to be changed through a configuration bitstream after manufacture, shortening development cycles and supporting product variants through a common PCB design. The EP2C15AF256C6N combines 14,448 logic elements with 152 user I/O in a surface-mount 256-LBGA package. Its listed 500 MHz operating frequency supports demanding clocked logic, while 1.2 V core operation suits modern low-voltage digital systems. The commercial temperature grade is listed as 0 to 85 degrees Celsius, making the device appropriate for industrial equipment where operating conditions stay within that range. Cyclone II devices use configurable logic elements, embedded memory, and programmable interconnect resources to support embedded processing and control architectures. The EP2C15 designation identifies the device family and resource level, while AF256 identifies the 256-ball package. Programming and board bring-up should follow the Cyclone II device-family data sheet and the exact pin-assignment table for this orderable part. Typical applications include industrial control, communications infrastructure, instrumentation, consumer electronics, embedded control, and parallel signal processing. Its combination of 152 I/O and 14,448 logic elements is useful when a design needs many peripheral connections but does not justify the resources or cost of a much larger FPGA. The primary layout consideration is the 256-LBGA land pattern. Follow the manufacturer pin-assignment, escape-routing, and decoupling guidance rather than relying on a generic BGA layout. Confirm that the PCB design has adequate fanout from the fine-pitch balls to the component power, ground, configuration, clock, and user-I/O routing layers. This product record combines the device's key architecture, package, frequency, logic-cell, I/O, temperature, and sourcing information with practical FPGA design guidance and a clearly documented drop-in alternative assessment for engineers evaluating lifecycle and board-compatibility decisions.

詢價 聯絡我們
EP2C15AF256C7N - 14,448-LE Cyclone II FPGA | Altera
EP2C15AF256C7N

EP2C15AF256C7N - 14,448-LE Cyclone II FPGA | Altera

The Altera EP2C15AF256C7N is a Cyclone II field-programmable gate array with 14,448 logic elements, 152 user I/O, and 239,616 bits of embedded memory in a 256-lead FBGA package. The device operates from a 1.2 V supply, has a listed maximum clock frequency of 402.58 MHz, and is specified for the 0 to 85 degrees Celsius commercial-temperature range. These parameters position it as a compact programmable-logic device for embedded control, data acquisition, communications, and industrial interface designs. A field-programmable gate array is a semiconductor whose digital logic, interconnections, and configurable I/O are defined after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Cyclone II family combines logic elements, embedded memory, general-purpose I/O, and PLL-based clocking in one integrated device, allowing a board design to adapt to protocol or control requirements without changing the PCB. The EP2C15AF256C7N provides 14,448 logic elements, 152 user I/O, 239,616 bits of embedded memory, and a 402.58 MHz listed operating frequency. Its 1.2 V core supply reduces power requirements compared with older FPGA generations, while the 256-FBGA package supports dense board layouts. The commercial temperature range makes it appropriate for indoor industrial equipment, laboratory instruments, embedded controllers, and general-purpose data-processing modules. Cyclone II devices use configurable logic architecture for datapath and control logic, with embedded memory available for buffering and lookup functions. The 256-ball package provides a high pin count relative to earlier low-cost FPGAs, although ball pitch, exposed-pad requirements, and multilayer board construction must be considered during layout. Programming is normally performed through a JTAG-compatible configuration interface, with configuration data loaded from a nonvolatile memory device or another permitted source. Typical uses include industrial I/O expansion, sensor acquisition, motor and machine control, communications bridges, data logging, and embedded protocol gateways. Its combination of 152 I/O and embedded memory allows multiple external interfaces and local data buffering to coexist in one package. Designs can also use FPGA logic to consolidate discrete control functions, shorten signal paths, and provide a field-update path for logic changes. Board planning should follow the Cyclone II layout guidance for power, decoupling, configuration pins, clock routing, and high-speed I/O. Place core and I/O supply capacitors close to their designated balls, route configuration signals away from fast clocks, and provide all voltage rails simultaneously. The 256-FBGA footprint requires careful escape-routing planning and a PCB process capable of supporting its ball pitch. This product page consolidates the core Cyclone II device characteristics, package constraints, lifecycle considerations, qualified family alternatives, and practical implementation guidance into one engineering-focused reference for design reviews and legacy-system maintenance.

詢價 聯絡我們
EP2C15AF256C8N - 15K LEs Cyclone II FPGA, 256-FBGA | Intel / Altera
EP2C15AF256C8N

EP2C15AF256C8N - 15K LEs Cyclone II FPGA, 256-FBGA | Intel / Altera

The Intel (formerly Altera) EP2C15AF256C8N is a Cyclone II family field-programmable gate array (FPGA) with 14,448 logic elements, 239,616 bits of embedded RAM, and 152 maximum user I/O pins, housed in a 256-ball fine-line BGA (FBGA-256) package. Built on a 90 nm CMOS process with a 1.2 V core supply, the device delivers low-cost, low-power programmable logic for high-volume applications such as digital signal processing, industrial control, and display interfaces. A Cyclone II FPGA is a SRAM-based programmable logic device that integrates configurable logic arrays (LABs), embedded memory blocks (M4K blocks), embedded 18x18 multipliers, and a programmable I/O ring into a single die. Positioned below the high-end Stratix family and above the original Cyclone series, Cyclone II is designed to deliver ASIC-like logic density at FPGA-like design flexibility, while consuming substantially less power than its Stratix siblings - typically 50-60% lower static power at comparable densities. Key features include support for LVDS, LVCMOS, SSTL, and HSTL I/O standards through dedicated True-LVDS circuitry; up to 52 embedded 18x18 multipliers enabling DSP-style FIR/FFT pipelines; a maximum of 4 PLLs providing clock synthesis, phase shifting, and frequency multiplication; and 68 M4K RAM blocks that can be configured as RAM, ROM, or FIFO. The 'C8' speed grade corresponds to an 8 ns internal timing corner, and the 'N' suffix denotes a lead-free, RoHS-compliant package. Architecturally, the EP2C15 uses a sea-of-LABs fabric where each LAB contains 16 logic elements (LEs), each LE comprising a 4-input LUT, a programmable register, and a carry chain. Interconnect is achieved through MultiTrack routing with row/column drivers, and configuration data is stored in SRAM, requiring an external configuration device such as the EPCS4 or EPCS16 serial flash on power-up. Typical applications include digital video processing and display controllers, motor control and industrial automation, software-defined radio baseband, low-cost prototyping of custom logic, and communications infrastructure such as bridges between legacy parallel buses and modern serial interfaces. The 256-ball FBGA package enables compact PCB layouts and supports high-speed signal integrity for LVDS links. When designing with this device, plan configuration loading time carefully - the EP2C15 in fast standard mode requires approximately 12 ms to configure from an EPCS16, and JTAG or Active Serial configuration must be selected via MSEL pins. Decoupling must follow Altera's Cyclone II pin connection guidelines, with 0.1 µF and 0.01 µF capacitors near every VCCINT and VCCIO bank. This page synthesizes distributor pricing, drop-in Cyclone II alternatives, and practical board-design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
EP2C15AF256I8N - Cyclone II FPGA 14448 LE 152 I/O | Altera
EP2C15AF256I8N

EP2C15AF256I8N - Cyclone II FPGA 14448 LE 152 I/O | Altera

The Altera EP2C15AF256I8N is a Cyclone II field-programmable gate array (FPGA) with 14,448 logic elements, 239,616 RAM bits and 152 user I/O pins, supplied in a 256-ball FBGA (256-LBGA) package with a 1.2 V core voltage. It is an industrial-temperature "I8" speed-grade part intended for cost-sensitive control, DSP, and interface applications. An FPGA is a semiconductor device containing reconfigurable logic blocks, embedded memory, and programmable routing that can implement arbitrary digital circuits after manufacturing. FPGAs sit in the programmable logic hierarchy: FPGA - programmable logic device (PLD) - integrated circuit - semiconductor. Unlike fixed-function ASICs, the EP2C15AF256I8N can be reprogrammed in-system through JTAG or configuration flash, making it useful for designs that require hardware flexibility and field upgrades. Key features of the EP2C15AF256I8N include 14,448 logic elements (LEs), 239,616 bits of embedded RAM, and 152 user I/O pins. The AF256 ordering segment indicates the 256-ball FineLine BGA package family, while the I8 notation denotes industrial temperature grade and speed grade. The trailing N suffix indicates a lead-free, RoHS-compliant package option. The Cyclone II architecture organizes LEs into logic array blocks, with embedded memory blocks and multiplier resources for DSP and control logic. The 1.2 V core minimizes power, and the IO banks support common voltage levels including 3.3 V and 1.5 V, allowing direct connection to legacy parallel buses and mixed-voltage systems. As an older mainstream FPGA family, it has a mature software toolchain and broad ecosystem support. Typical applications include industrial automation, video and image processing, communications bridging, motor control, and test instrumentation. The 152 user I/O pins can interface to ADCs, DACs, SRAM, and parallel data buses. Its moderate logic density makes it suitable for glue logic, soft-core processors, and protocol conversion without the cost of a larger FPGA. Designers should verify the exact BGA ball map and I/O bank rules from the Cyclone II Device Handbook before layout. A separate Intel/Altera configuration device such as EPCS4 is commonly used for non-volatile configuration; the FPGA can also be configured through JTAG for prototyping. This page synthesizes verified distributor listings, same-family drop-in alternatives, parametric cross-reference data, and board design guidance—information often scattered between distributor pages and datasheets.

詢價 聯絡我們
EP2C15AF484A7N - 14,448 LEs Cyclone II FPGA | Intel
EP2C15AF484A7N

EP2C15AF484A7N - 14,448 LEs Cyclone II FPGA | Intel

The Intel EP2C15AF484A7N is a Cyclone II field-programmable gate array with 14,448 logic elements, 903 logic array blocks, 239,616 embedded RAM bits, and 315 user I/O in a 484-FBGA package. The device operates from a 1.15 V to 1.25 V core supply and is identified as a 450 MHz FPGA in the available product records. A field-programmable gate array is a semiconductor whose digital logic and interconnect are configured after manufacture. FPGA belongs to the programmable-logic hierarchy alongside CPLD, providing substantially greater logic, memory, and I/O capacity. The Cyclone II architecture supports parallel programmable processing, embedded RAM, and programmable I/O, making it suitable for control, interface, signal-processing, and embedded-system functions. The EP2C15AF484A7N provides 14,448 logic elements organized as 903 CLBs or LABs. Its 239,616 total RAM bits allow more on-chip data storage than a basic combinational-logic design requires. A 315-I/O device offers a high pin count for buses, parallel interfaces, control signals, and external memory connections. These resources are particularly useful when a design must combine parallel control logic, data buffering, and external serial or parallel interfaces. The 484-FBGA package provides 484 physical ball positions in a 23 mm by 23 mm surface-mount footprint. Fine-pitch ball-grid packaging supports dense pin escape on compact boards, but it requires careful PCB layout, ground-plane continuity, and assembly-process control. The A7 designation denotes the catalog ordering configuration used for this exact Intel/Altera FPGA and package combination. Typical applications include industrial control and automation, embedded instrumentation, communications interfaces, video and image processing pipelines, networking equipment, and consumer or communications equipment requiring programmable parallel logic. The high I/O count is valuable when a design must terminate many external signals while retaining flexible post-manufacture configuration. Designers should validate the BGA escape routing, reference-voltage network, power-supply sequencing, configuration interface, clocking, and I/O standards against the manufacturer datasheet and board design rules. FPGA replacement also requires matching configuration memory, startup behavior, voltage, speed grade, temperature grade, package, and pin compatibility rather than logic capacity alone. This page organizes the exact device identity, package, resource counts, sourcing information, application guidance, and engineering considerations into one engineering reference. It also distinguishes genuine drop-in candidates from unrelated devices that merely use similar FPGA terminology.

詢價 聯絡我們
EP2C15AF484C6N - Cyclone II FPGA, 14,448 LEs, 484-FBGA | Intel
EP2C15AF484C6N

EP2C15AF484C6N - Cyclone II FPGA, 14,448 LEs, 484-FBGA | Intel

The Intel (Altera) EP2C15AF484C6N is a Cyclone II family Field-Programmable Gate Array (FPGA) housed in a 484-ball FineLine BGA (FBGA-484, 23x23 mm) package. Built on a 90 nm low-k process, the device integrates 14,448 logic elements (LEs) across 903 logic array blocks (LABs), 239,616 bits of embedded RAM (M9K blocks totaling approximately 239 kbit), and 315 user I/O pins supporting LVDS, LVCMOS, SSTL, and other single-ended and differential I/O standards. An FPGA (Field-Programmable Gate Array) is a programmable logic device built from an array of configurable logic blocks (CLBs/LABs), programmable interconnect, and programmable I/O cells. Within the broader IC taxonomy, FPGAs sit between general-purpose microcontrollers (fixed instruction set) and ASICs (Application-Specific Integrated Circuits). Cyclone II is Intel's low-cost, high-volume FPGA family targeting cost-sensitive applications where designers need ASIC-like integration without NRE costs, including industrial control, video processing, automotive driver assistance, and communications infrastructure. Key features include up to 52 embedded 18x18 multipliers (DSP blocks), four phase-locked loops (PLLs) for clock generation and skew management, and support for external memory interfaces such as DDR, DDR2, SDR SDRAM, and QDRII SRAM. The device operates from a 1.15 V to 1.25 V core supply with separate VCCIO banks for flexible I/O voltage mixing, and supports configuration via passive serial (AS), active serial, JTAG, or Altera-specific configuration schemes with built-in decompression and decryption options. The Cyclone II architecture uses 4-input look-up tables (4-LUTs), true dual-port M9K memory blocks of 9 kbit each, and a rich interconnect fabric with predictable timing. Multipliers are organized as 18x18 signed/unsigned blocks with optional input/output registers, suitable for FIR filters, FFT butterflies, and image-processing kernels. The I/O structure provides on-chip termination (OCT) and calibrated slew-rate control, enabling robust signal integrity at 100+ MHz LVDS rates. Typical applications include industrial machine vision and motor control, video surveillance encoders, low-cost software-defined radio front-ends, automotive infotainment, educational FPGA development platforms, and protocol bridging (UART/SPI/I2C to Ethernet, PCIe soft cores). The 484-FBGA package's 1.0 mm ball pitch is suitable for multi-layer PCB designs with controlled-impedance routing. When designing with this part, ensure the PCB has at least four dedicated ground and two VCCINT planes, and that configuration mode pins (MSEL) are tied to logic levels matching the chosen configuration scheme. Unused I/O pins should be left floating or driven to a defined state per Altera's guidelines; floating pins add leakage but avoid drive conflicts. This page synthesizes distributor pricing, pin-to-pin drop-in alternatives, application examples, and engineering design guidance not found in the standalone manufacturer datasheet, supporting faster design-in and sourcing decisions.

詢價 聯絡我們
EP2C15AF484C7N - 14,448 LEs Cyclone II FPGA | Intel
EP2C15AF484C7N

EP2C15AF484C7N - 14,448 LEs Cyclone II FPGA | Intel

The Intel EP2C15AF484C7N is a Cyclone II field-programmable gate array with 14,448 logic elements, a maximum operating frequency of 402.58 MHz, a 1.2 V supply requirement, and a 484-BGA package. It is designed for embedded logic, control, communications, and general-purpose programmable digital systems built around the 90 nm Cyclone II architecture. A field-programmable gate array, or FPGA, is a programmable digital semiconductor whose configurable logic blocks, memory resources, and input/output blocks are interconnected through a configurable fabric. The FPGA category sits between fixed-function logic ICs and software-programmable processors: engineers can implement digital functions in hardware while retaining the flexibility to revise logic, interfaces, and system behavior through programmable configuration data. The EP2C15AF484C7N provides 14,448 logic elements in a compact 484-BGA package. Its listed maximum frequency of 402.58 MHz makes it suitable for control logic, protocol handling, signal conditioning, and embedded datapaths that require deterministic parallel processing. The 90 nm fabrication process and 1.2 V operating supply place the device in the classic Cyclone II generation of low-cost FPGAs. The 484-BGA package supports dense board-level integration while presenting demanding escape-routing, via-in-pad, soldering, and inspection requirements. Because the device uses a large leadless package, PCB design must follow the manufacturer's ball-grid layout and power-decoupling guidance closely. Differential-pair routing, plane continuity, and thermal-via distribution are particularly important for reliable operation. Typical applications include industrial control systems, communications interfaces, data acquisition, embedded instrumentation, and legacy platform control. The device can also serve as a hardware companion to processors in applications requiring parallel logic, specialized I/O handling, or programmable timing. Before placing it in a new design, verify the required configuration device, board constraints, and signal-development tools. The main design trade-off is legacy-device availability against system flexibility. The programmable fabric supports design changes, but an older FPGA requires careful component planning and validation of its configuration, clocking, and mixed-signal implementation. Confirm supply status before committing a production board. This page consolidates the device identity, core capacity, speed, package, electrical characteristics, replacement considerations, and practical design guidance into an engineering-focused reference for evaluating the EP2C15AF484C7N.

詢價 聯絡我們
EP2C15AF484C8N - 15K Logic Cells Cyclone II FPGA | Intel
EP2C15AF484C8N

EP2C15AF484C8N - 15K Logic Cells Cyclone II FPGA | Intel

The Intel EP2C15AF484C8N is a Cyclone II field-programmable gate array with 14,448 logic elements, 239,616 embedded memory bits, and a maximum stated frequency of 402.58 MHz. The device is packaged in a 484-pin Fine Pitch Ball Grid Array and operates from a 1.2 V core supply. It combines programmable logic, fixed-phase-locked-loop blocks, embedded memory, general-purpose I/O, and dedicated configuration resources in one high-density FPGA package. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after manufacture. The FPGA hierarchy progresses from configurable logic elements to FPGAs and programmable logic devices, providing a practical alternative to application-specific integrated circuits when interfaces, control logic, or product features must change after design release. The EP2C15AF484C8N belongs to Intel's Cyclone II family and is intended for designs requiring substantial programmable logic in a high-pin-count BGA package. The main device characteristics include 14,448 logic elements, 239,616 bits of embedded RAM, a 1.2 V supply, and a listed maximum frequency of 402.58 MHz. Its 484-pin FBGA package provides a large number of connections for external memory, data buses, clocks, control signals, and general-purpose I/O. The C8 suffix identifies the device ordering configuration, while F484 identifies the 484-ball package. Detailed voltage, I/O, absolute-maximum-rating, and package-thermal limits must be taken from the manufacturer datasheet before schematic or layout release. Cyclone II devices use configurable logic blocks connected by a programmable routing network. Embedded memory supports data buffering, packet storage, lookup functions, and other stateful logic, while dedicated PLL resources support clock generation and phase adjustment. The FPGA requires configuration data at power-up, so the board design must provide a supported configuration interface and reliable supply sequencing. Because configuration pins may be reused for user I/O after setup, their treatment should follow the pin-description and configuration guidelines in the manufacturer documentation. Typical uses include industrial control, communications, instrumentation, embedded video processing, networking equipment, and test systems. The 14,448 logic elements make the device suitable for parallel datapaths and multi-module control systems, while 239,616 memory bits can support packet buffers, local lookup tables, or temporary data storage. The high-pin-count package is particularly useful when a design requires numerous external interfaces and is not constrained by a small board area. Layout planning is critical for a 484-pin BGA FPGA. Follow the manufacturer package dimensions, ball map, escape-routing guidance, and via requirements exactly; do not infer footprint geometry from a generic BGA drawing. Place decoupling capacitors close to the supply and ground balls, keep sensitive clock and configuration routes short, and provide solid ground-plane continuity. Validate signal integrity, power-integrity, and thermal performance with simulation and board-level measurements before production. This product page combines the exact device identity, package and logic-resource information with practical configuration, replacement, sourcing, and PCB considerations. It also distinguishes true drop-in substitutions from functional alternatives, which is essential because changing FPGA architecture or ball assignment can require a complete PCB redesign even when the replacement performs a similar function.

詢價 聯絡我們
EP2C15AF484I8N - 14,448 LEs Cyclone II FPGA 484-FBGA | Intel
EP2C15AF484I8N

EP2C15AF484I8N - 14,448 LEs Cyclone II FPGA 484-FBGA | Intel

The Intel (formerly Altera) EP2C15AF484I8N is a Cyclone II family Field-Programmable Gate Array (FPGA) housed in a 484-ball FineLine BGA (FBGA) package with 315 user I/O pins. The die delivers 14,448 logic elements backed by 239,616 bits of embedded RAM and supports up to 250 MHz internal operation, making it a workhorse low-cost FPGA for high-volume embedded, industrial, and communications designs. An FPGA is a reprogrammable semiconductor whose logic fabric is configured after manufacture via a bitstream loaded into SRAM configuration cells. Cyclone II devices target cost-sensitive applications that still require programmable logic, DSP blocks, and external memory interfaces. In the broader taxonomy, FPGAs are programmable logic devices (PLDs) belonging to the larger category of digital logic ICs and ultimately semiconductors. Cyclone II succeeded the original Cyclone family with a 90 nm process, embedded 18x18 multipliers for DSP, and on-chip PLLs for clock management. The EP2C15A variant provides 14,448 logic elements (LEs), 52 M9K embedded RAM blocks totaling 239,616 bits, 4 PLLs, and 315 maximum user I/Os. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards and offers up to four DLLs/PLLs for clock synthesis and skew management. Configuration is via passive serial, fast passive parallel, JTAG, or Altera-enhanced configuration devices, and the part is offered in commercial (0 to 85 C) and industrial (-40 to 100 C) temperature grades. Typical applications include industrial motor control, video processing bridges, software-defined radio front-ends, low-cost ASIC prototyping, and communications line cards. The 484-FBGA package offers ample I/O for memory-heavy designs and high-speed parallel interfaces such as DDR/DDR2 SDRAM controllers. Designers commonly pair the EP2C15 with external DDR SDRAM, flash for configuration storage, and an EPCS serial configuration device. When designing with EP2C15AF484I8N, observe the FPGA power-on sequencing and use proper decoupling (100 nF + bulk) on every VCCIO/VCCINT rail. The 484-FBGA requires careful PCB stack-up and microvia technology for reliable assembly. JTAG access for programming and debug is essential, and an external configuration device is required because Cyclone II SRAM is volatile.

詢價 聯絡我們
EP2C20AF256A7N - 18,752-Cell Automotive Cyclone II FPGA
EP2C20AF256A7N

EP2C20AF256A7N - 18,752-Cell Automotive Cyclone II FPGA

The Altera EP2C20AF256A7N is an automotive-grade Cyclone II field-programmable gate array with 18,752 logic elements, 152 user I/O, and a maximum clock frequency of 402.58 MHz, housed in a surface-mount 256-ball FBGA package. It operates from a 1.15 V to 1.25 V supply and supports a junction-temperature range of -40°C to 125°C. These characteristics place the device in the FPGA and CPLD hierarchy, where programmable logic implements parallel processing, interface bridging, control, and signal-processing functions. An FPGA is a reconfigurable semiconductor whose logic, memory, and I/O behavior is defined through bitstream programming rather than a fixed circuit mask. The Cyclone II family combines general-purpose programmable logic with dedicated memory resources, allowing one device to consolidate functions that would otherwise require multiple programmable or discrete ICs. EP2C20AF256A7N is specifically associated with the automotive temperature and qualification class identified in its ordering information. The EP2C20AF256A7N provides 18,752 logic elements and 152 I/O, making it suitable for control logic, data acquisition, communication interfaces, and embedded signal-processing functions that require deterministic parallel hardware. Its specified 1.15 V to 1.25 V operating range supports compact systems in which the FPGA interfaces with modern low-voltage logic. The maximum stated frequency of 402.58 MHz indicates the device's performance class, although actual design timing still depends on the selected logic path, I/O standard, speed grade, and operating conditions. The device is manufactured on 90 nm technology and includes 239,616 bits of memory in the listing data. The 256-LBGA package supports dense board interconnection without the protruding leads of a through-hole package. Its square surface-mount construction requires careful ball-layout verification, power-plane design, signal-integrity analysis, and thermal planning before a PCB is released for fabrication. Typical uses include automotive body and infotainment control, industrial automation, communications infrastructure, instrumentation, and embedded processing. The combination of 152 I/O and 18,752 logic elements allows designers to consolidate interface conversion, protocol handling, timing, and control functions while retaining the reprogrammability associated with FPGA-based product updates. Designers should verify the exact pin assignments, supported I/O standards, configuration method, decoupling requirements, and clock constraints in the manufacturer datasheet. Because LBGA routing is dense, power and ground distribution should use uninterrupted planes, while high-speed and sensitive signals should avoid crossings between aggressive power or ground references. Automotive designs also require confirmation of the appropriate qualification and production-test requirements for the complete system. This page consolidates the available device specifications, sourcing guidance, comparison parameters, and implementation considerations into a design-oriented reference. It also distinguishes true package-compatible alternatives from broader FPGA alternatives that may require a new footprint, pin reassignment, or additional interface conversion.

詢價 聯絡我們
EP2C20AF256I8N - 20K Logic Elements FPGA | Altera
EP2C20AF256I8N

EP2C20AF256I8N - 20K Logic Elements FPGA | Altera

The Altera EP2C20AF256I8N is a Cyclone II field-programmable gate array with 18,752 logic elements, a maximum operating frequency of 402.58 MHz, a 1.2 V supply, and a 256-pin FBGA package. Designed for industrial-temperature operation, this programmable logic device combines substantial configurable logic resources with a compact surface-mount form factor. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnects, and input/output behavior are configured after manufacture. FPGAs sit within the broader hierarchy of programmable logic devices, interface ICs, and digital semiconductors. They are used when engineers need parallel hardware, adaptable interfaces, or high-throughput logic that would be cumbersome to implement with fixed-function logic ICs. The EP2C20AF256I8N provides 18,752 logic elements for digital datapaths, control logic, communication interfaces, and embedded protocol handling. Its stated maximum frequency of 402.58 MHz supports demanding clocked designs, while the 1.2 V operating supply is characteristic of the Cyclone II generation. The 256-pin FBGA package supports a high pin count for external memory, configuration, clock, and general-purpose I/O requirements. The AF256 suffix identifies the 256-pin package configuration, while the I8 ordering identifies industrial temperature and speed-grade characteristics. Configuration storage, programming, and device handling follow the Cyclone II design flow. Because this device is programmed rather than fixed in silicon, the same hardware can support different control, interface, or signal-processing functions after configuration is loaded. Typical uses include industrial control, embedded communications, data acquisition, instrumentation, video-processing backends, and general-purpose programmable logic. The device is particularly appropriate when deterministic parallel processing, reconfigurable interfaces, or compact implementation of complex digital functions are required. The FBGA footprint also demands careful PCB layout, especially for power delivery, clock integrity, and configuration routing. Designers should use the Cyclone II device family datasheet for the complete pin table, power specifications, configuration requirements, differential-pair rules, and package dimensions. The FBGA layout requires adequate via access under the device, continuous supply planes, short return paths, and careful decoupling. Configuration signals and clock inputs should be routed away from high-current switching nodes wherever possible. This page combines the device identity, operating characteristics, package information, sourcing guidance, drop-in alternatives, comparison parameters, and practical PCB considerations. It is intended to help engineers determine whether the EP2C20AF256I8N fits the logic capacity, speed, temperature class, package, and programming requirements of an industrial programmable-logic design.

詢價 聯絡我們
EP2C20AF484A7N - 18,752-Cell 90 nm FPGA | Altera | Automotive
EP2C20AF484A7N

EP2C20AF484A7N - 18,752-Cell 90 nm FPGA | Altera | Automotive

The Altera EP2C20AF484A7N is a Cyclone II field-programmable gate array with 18,752 logic elements, 315 I/O, 239,616 embedded memory bits, and a maximum operating frequency of 402.58 MHz. Manufactured on 90 nm technology, the device operates from 1.2 V and is supplied in a 484-ball BGA package. It is identified as an automotive-grade part, making it suitable for embedded control, industrial networking, instrumentation, and vehicle-oriented electronics requiring programmable logic. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. Compared with a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel control logic, interfaces, signal processing, and protocol handling in one reconfigurable device. Its high I/O count and embedded memory also make it suitable for systems requiring several independent data paths. The EP2C20AF484A7N provides 18,752 logic cells, 315 I/O, and 239,616 bits of embedded memory for the Cyclone II architecture. Its listed maximum frequency of 402.58 MHz supports moderate clock rates, while the 1.2 V core supply reduces power requirements in compact embedded systems. The 484-ball BGA package provides a dense surface-mount interface, although its fine ball pitch complicates inspection, assembly, and prototype rework. The automotive temperature designation supports applications where operating conditions extend beyond ordinary commercial environments. Technical suitability depends on the target clock, I/O standards, memory interface, pin assignment, and available logic and routing resources. Because this device belongs to the mature Cyclone II generation, engineers should preserve the original Quartus project, pin constraints, and programming file when maintaining an existing platform. Legacy intellectual property, software models, and development tools may also require version-compatible environments. The BGA package demands careful pad layout, reflow control, and inspection to obtain reliable assembly yield. Typical uses include industrial control systems, automotive electronics, communications infrastructure, embedded signal processing, and test equipment. The 315 available I/O allow numerous external connections, while the embedded memory supports buffering, packet handling, and local data storage. For low-pin-count designs, a smaller-package member of the Cyclone II family may reduce board area; for designs needing greater logic capacity or faster performance, another family member may be more appropriate. Device selection should therefore be based on verified resource utilization rather than the maximum device rating alone. A critical design step is to compile the complete design for the exact EP2C20AF484A7N speed, temperature, and package selections before PCB release. Verify the pinout, differential I/O requirements, power rails, decoupling, configuration pins, clock inputs, and JTAG connections against the manufacturer datasheet. Check assembly capability against the 484-BGA geometry, and perform continuity, boundary-scan, and functional tests after board fabrication. This page combines the available device parameters, source links, application guidance, and package-aware engineering considerations with a structured assessment of likely drop-in alternatives. It is intended to accelerate engineering review while preserving the importance of device-specific configuration, qualification, assembly, and lifecycle verification.

詢價 聯絡我們
EP2C20AF484I8N - 18,752-LUT Cyclone II FPGA | Intel
EP2C20AF484I8N

EP2C20AF484I8N - 18,752-LUT Cyclone II FPGA | Intel

The Intel EP2C20AF484I8N is a Cyclone II field-programmable gate array with 18,752 logic elements, 315 I/O, 239,616 RAM bits, a 402.58 MHz maximum clock, and a 1.2 V core supply in a 484-pin FBGA package. It combines programmable logic, embedded memory, and programmable I/O in a single surface-mount semiconductor designed for embedded control, communications, signal processing, and industrial applications. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy: FPGA -> programmable logic device -> digital semiconductor. Compared with a fixed-function application-specific integrated circuit, an FPGA permits hardware behavior to be revised through configuration files, shortening development cycles and supporting parallel processing, state machines, protocol handling, and custom peripheral functions. The Cyclone II architecture provides 18,752 logic elements and 239,616 RAM bits for data storage and logic implementation. Its 315 I/O pins offer substantial connectivity for external memories, control signals, and high-speed interfaces. The device is identified as operating with a 1.2 V core and reaching 402.58 MHz, making it suitable for parallel datapaths and moderately clocked embedded systems requiring substantially more parallelism than a general-purpose microcontroller. The EP2C20AF484I8N is offered in a 484-pin fine-pitch ball grid array package with surface-mount construction. The package supports compact PCB integration, but its high pin count and fine pitch require careful escape-routing, multilayer layout, and assembly planning. Configuration storage, programming hardware, clocking, decoupling, and I/O standards remain central implementation considerations. Typical uses include industrial control, embedded communications, data acquisition, protocol conversion, and embedded processing. In each case, the device can implement multiple finite-state machines, parallel algorithms, or custom interface logic in one FPGA. A clocking and power design should support the 1.2 V core requirement, while board-level signal integrity must accommodate the dense 484-pin FBGA footprint. For a new design, verify the required I/O standards, supported memory interfaces, configuration scheme, clock tolerance, and operating-temperature grade before layout release. Reuse of an existing PCB should also include a complete pin, voltage, timing, and configuration compatibility review rather than package matching alone. This product summary combines the key Cyclone II resource figures, package information, drop-in family alternatives, application guidance, and PCB design considerations to support faster component selection and engineering review.

詢價 聯絡我們
EP2C20F256C6 - 18,752 LEs, 500 MHz, 256-LBGA FPGA | Intel
EP2C20F256C6

EP2C20F256C6 - 18,752 LEs, 500 MHz, 256-LBGA FPGA | Intel

The Intel EP2C20F256C6 is a Cyclone II field-programmable gate array with 18,752 logic elements, 500 MHz performance, 152 I/O, and a 256-LBGA package. It uses 90 nm fabrication technology and operates from a 1.2 V supply. The device combines 18,752 configurable logic elements with 239,616 bits, or 234 kbit, of embedded memory, providing a compact programmable-logic platform for control, communications, signal processing, and embedded system integration. A field-programmable gate array is a semiconductor in which the digital circuit is defined after manufacture. An FPGA belongs to the programmable-logic hierarchy, where configurable logic, block memory, and programmable I/O replace a fixed combination of gates, counters, interfaces, and memory. The Cyclone II architecture provides a practical alternative to custom ASICs when logic must be revised quickly, prototypes must be produced in small volumes, or board-level parallelism is needed. The EP2C20F256C6 combines a 500 MHz device operating point with 18,752 logic elements and 152 user I/O in a 256-LBGA package. Its 234 kbit of embedded memory supports data buffering, lookup tables, packet handling, and state-machine storage. The 1.2 V core supply supports modern FPGA clocking and logic operations, while 152 I/O provide substantial connectivity for buses, memory interfaces, clock inputs, control signals, and external data acquisition. Cyclone II devices use programmable logic technology for flexible hardware implementation. Engineers can configure parallel datapaths, protocol bridges, state machines, counters, and control logic in one integrated device. The EP2C20F256C6 is positioned for designs requiring more logic and I/O than small CPLDs while retaining a relatively compact 256-ball package for board integration. Typical uses include industrial control and automation, communications infrastructure, test and measurement, embedded instrumentation, audio and signal-processing front ends, and general-purpose digital prototyping. Its 18,752 logic elements can distribute independent functions across parallel channels, while embedded memory can support buffering and lookup operations close to the logic that consumes the data. Design planning should account for the 256-LBGA footprint, ball assignment, power distribution, decoupling, clock routing, and programmed I/O constraints. Existing Quartus II-compatible designs and tool flows should be checked against the exact device speed grade and package before production release. Because the Cyclone II family has reached end of production, long-term availability and redesign planning require particular attention. This page consolidates device specifications, lifecycle considerations, same-package alternatives, comparison parameters, and practical replacement guidance. It is intended to help engineers evaluate EP2C20F256C6 sourcing, board compatibility, and migration planning without overlooking device-speed, temperature, or package distinctions.

詢價 聯絡我們
EP2C20F256C6N - 18,752 LEs Cyclone II FPGA 256-FBGA | Intel
EP2C20F256C6N

EP2C20F256C6N - 18,752 LEs Cyclone II FPGA 256-FBGA | Intel

The Intel (Altera) EP2C20F256C6N is a low-cost Cyclone II FPGA featuring 18,752 logic elements, 239,616 bits of embedded RAM, and 152 user I/O pins in a 256-ball FineLine BGA (FBGA-256) package. Built on a 90 nm low-k dielectric CMOS process, this device targets high-volume, cost-sensitive applications requiring programmable logic without the power and cost of high-end FPGAs. The "C6N" suffix denotes the commercial speed grade (C6) with Pb-free lead-free (N) termination per JEDEC J-STD-020. A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory and multiplier blocks. FPGAs sit hierarchically within programmable logic devices (PLD) and are used to implement custom digital logic, signal processing pipelines, and glue logic. The Cyclone II family targets low-power, high-volume applications and uses a look-up-table (LUT) based logic architecture combined with embedded M4K RAM blocks, multiplying DSP blocks, and PLL clock management. Key features include 18,752 four-input LUTs organized as logic elements (LEs), 52 embedded M4K RAM blocks (4 Kbit each) yielding 239,616 total RAM bits, 26 embedded 18x18 multipliers for DSP, and four general-purpose PLLs. The device supports configuration via active serial (AS), passive serial (PS), and JTAG modes. It accepts up to 16 global clock networks and provides 152 user I/O pins distributed across 8 I/O banks, each supporting LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards with hot-socketing capability. Typical applications for the EP2C20F256C6N include industrial motor control and factory automation, video processing and display controllers, software-defined radio (SDR) front-end signal conditioning, automotive infotainment prototyping, and embedded vision pipelines. The 26 dedicated hardware multipliers enable moderate DSP workloads such as FIR filtering and image preprocessing without consuming logic resources. Designers select this device when deterministic parallel processing is needed at a unit price point lower than Cyclone III/IV or competing low-end FPGAs. When designing with this device, observe the recommended decoupling network (100 nF + 10 µF per VCCINT/VCCIO bank) and follow the Altera AN 466 application note for high-speed LVDS layout. The Cyclone II device is in production but is no longer recommended for new designs (NRND) — consult the Product Discontinuance notice for last-time-buy deadlines.

詢價 聯絡我們
EP2C20F256C7 - Cyclone II FPGA 18,752 LE 152 I/O | Altera
EP2C20F256C7

EP2C20F256C7 - Cyclone II FPGA 18,752 LE 152 I/O | Altera

The Altera EP2C20F256C7 is a Cyclone II Field Programmable Gate Array (FPGA) containing 18,752 logic elements, 239,616 RAM bits, 152 user I/O pins, a 1.2 V core voltage, and a 402.58 MHz maximum internal clock frequency, supplied in a 256-ball LBGA/FBGA package. An FPGA is a semiconductor device containing programmable logic blocks and programmable interconnects that can be configured after manufacturing to implement arbitrary digital circuits. In the system hierarchy, an FPGA sits above standard-cell ASICs as a reconfigurable logic platform; it is a member of the programmable logic device family, which includes CPLDs and complex PLDs, and is widely used to implement glue logic, interface bridging, DSP data paths, and soft-core processors. Key differentiators of the EP2C20F256C7 include its balance of logic density and I/O count, with 18,752 logic elements and 152 user I/O arranged in a 256-ball package. The Cyclone II family is built on a 90 nm low-k dielectric process, helping to keep cost and power low while delivering adequate performance for cost-sensitive applications. The device integrates 26 embedded 18-bit x 18-bit multipliers and four PLLs, making it suitable for simple DSP and clock-managed designs without external PLL components. Architecturally, the Cyclone II core uses a 1.2 V supply with programmable I/O banks that support common single-ended and differential standards. The C7 suffix denotes a commercial temperature grade and speed grade 7. Its configuration is loaded from an external configuration device or host through JTAG, active serial, or passive serial modes, giving designers flexible in-system update options. Typical applications include industrial motor control, protocol bridging, video interface conversion, test and measurement, and as a cost-effective vehicle for prototyping or replacing custom ASICs. The 152 I/O pins in the F256 footprint are sufficient for parallel buses and modular peripheral expansion. A practical design consideration is that this non-N part should be used only where lead-bearing solder is acceptable; for RoHS-marketed systems, select the EP2C20F256C7N or another N-suffixed variant. Good 1.2 V core decoupling and a defined power-up sequence are also essential for reliable FPGA configuration. This page synthesizes distributor stock status, pricing, drop-in same-family alternatives, and practical design notes, providing actionable selection information that is not commonly available in a single datasheet listing.

詢價 聯絡我們
EP2C20F256C7N - 18752 LE Cyclone II FPGA, 256-FBGA | Altera
EP2C20F256C7N

EP2C20F256C7N - 18752 LE Cyclone II FPGA, 256-FBGA | Altera

The Altera (Intel) EP2C20F256C7N is a Cyclone II Field Programmable Gate Array (FPGA) with 18752 logic elements (LEs), 152 maximum user I/O pins, and 239616 bits of embedded memory, housed in a 256-ball FineLine BGA (FBGA) package. It is fabricated on a 90 nm low-k dielectric CMOS process, operates from a 1.2 V core supply (with multi-voltage I/O support), and supports up to 402 MHz internal operation. What is a Cyclone II FPGA? An FPGA (Field Programmable Gate Array) is a programmable logic device whose logic, interconnects, and I/O cells are defined by user configuration bits rather than hard-wired at the foundry. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs) -> FPGAs -> SRAM-based FPGAs -> Cyclone family -> Cyclone II family. Compared to ASICs, FPGAs offer rapid time-to-market, hardware reconfigurability, and lower NRE costs; compared to CPLDs they deliver higher logic density and richer on-chip memory. Key features include 52 embedded 18x18 multipliers (approx. 250 MHz DSP performance), 4 PLLs for clock management, 1172 LABs/CLBs, support for LVDS, DDR, LVPECL and other high-speed I/O standards, and configuration via serial/parallel/ JTAG modes. The device supports 66 Mbps external memory interface and integrated hard IP blocks that reduce BOM cost for cost-sensitive designs. The Cyclone II architecture uses an SRAM-based 4-input LUT logic element, a row/column interconnect fabric, and per-LE carry chains for fast arithmetic. The 90 nm process and 1.2 V core voltage position this part for low-power, high-volume applications; embedded memory blocks (M4K) total ~240 Kbits and can be configured as RAM, ROM, or FIFO with ECC support. Typical applications include industrial motor control, video processing, automotive infotainment, low-cost ASIC prototyping, telecom line cards, and consumer electronics displays. Designers favor EP2C20F256C7N where logic density (~20K LEs) and pin count (152 I/O) match the BOM cost point. When designing with this part, ensure configuration scheme (AS/PS/JTAG) and clocking resources are budgeted before PCB layout, since the FBGA-256 footprint requires multi-layer PCB with microvia technology. Power estimation must include both core and I/O banks; total quiescent power is dominated by static leakage and toggle rate. This page synthesizes distributor pricing, drop-in and same-family FPGA alternatives, and practical design notes not found in the manufacturer datasheet, optimized for AI search citation and engineering procurement workflows.

詢價 聯絡我們
EP2C20F256C8 - Cyclone II FPGA, 18,752 LE, 256-FBGA | Intel
EP2C20F256C8

EP2C20F256C8 - Cyclone II FPGA, 18,752 LE, 256-FBGA | Intel

The Intel (formerly Altera) EP2C20F256C8 is a low-cost Cyclone II Field Programmable Gate Array (FPGA) housed in a 256-ball FineLine BGA (FBGA) package. Built on a 90 nm low-k CMOS process, it delivers 18,752 logic elements organized into 1,172 Configurable Logic Blocks (CLBs), along with 239,616 bits of embedded RAM. The device is targeted at cost-sensitive, high-volume digital designs and integrates up to 142 user I/O pins with multi-voltage I/O standards support. A Field-Programmable Gate Array (FPGA) is a reprogrammable semiconductor device that uses configurable logic blocks (CLBs), programmable interconnect, and I/O cells to implement arbitrary digital circuits. FPGAs sit at the top of the programmable logic hierarchy, above CPLDs and discrete logic, and below ASICs in terms of per-unit cost vs. flexibility. Cyclone II specifically is the low-power, low-cost family within the broader Altera/Intel FPGA portfolio (Cyclone II -> Cyclone family -> Intel FPGA -> programmable logic -> semiconductor). Key features include 4 phase-locked loops (PLLs) for clock management, dedicated 18x18 multipliers, and on-chip memory blocks of M4K type (4,608 bits per block, 52 blocks total). The device supports LVDS, LVTTL, LVCMOS, PCI, and SSTL I/O standards, making it compatible with virtually any digital interface. Dual-purpose configuration pins allow JTAG-based in-system programming via the standard Active Serial (AS) or Joint Test Action Group (JTAG) modes using the Quartus II design software. Cyclone II FPGAs use a 4-input look-up table (LUT) architecture with embedded SRAM configuration cells. The silicon is fabricated in a 90 nm process, providing a balance between logic density, static power, and dynamic performance. The 'C8' speed grade corresponds to a -8 internal commercial speed rating with a maximum internal clock frequency around 402.5 MHz per the device family. Typical applications include digital video processing, industrial motor control, automotive infotainment prototypes, custom peripheral expansion, and glue-logic replacement. The 256-FBGA package with 1.0 mm ball pitch is suitable for reflow-solder assembly on standard 4-layer PCBs. When designing with this part, ensure that all configuration mode pins are correctly terminated and that the JTAG chain respects the TCK-to-TDI propagation delay budget. Use Quartus II (legacy) or Quartus Prime Lite Edition for synthesis, place-and-route, and bitstream generation. This page synthesizes verified distributor data, parametric drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

詢價 聯絡我們
EP2C20F256C8N - Cyclone II FPGA, 18,752 LEs, 256-FBGA | Intel
EP2C20F256C8N

EP2C20F256C8N - Cyclone II FPGA, 18,752 LEs, 256-FBGA | Intel

The Intel (formerly Altera) EP2C20F256C8N is a low-cost Cyclone II Field-Programmable Gate Array (FPGA) featuring 18,752 logic elements (LEs), 239,616 bits of embedded RAM, and 152 embedded 18x18 multipliers, packaged in a 256-ball FineLine BGA (FBGA-256) at 1.2 V core. According to manufacturer material referenced on the Cyclone II device handbook, the device is built on a 90 nm process and supports up to 315 user I/O pins (device-package dependent) with on-board configuration via serial/parallel flash and JTAG. The 'C8' speed grade targets approximately 402 MHz internal operation, while the 'N' suffix indicates lead-free / Pb-free termination. The EP2C20F256C8N extends the Cyclone II family mid-density range between EP2C8 and EP2C35, making it a strong fit for cost-sensitive high-volume designs. What is a Cyclone II FPGA? A Field-Programmable Gate Array (FPGA) is a semiconductor IC whose logic function is defined after manufacturing via a hardware description language (HDL) bitstream. The Cyclone II family sits in the low-cost (non-volatile configuration, external SRAM-based) tier of programmable logic, hierarchically classified as: FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor. Compared with CPLDs (which are typically non-volatile and smaller), FPGAs offer higher logic density, embedded multipliers, and block RAM, but require an external configuration memory at power-up. Key features include 18,752 four-input look-up tables (4-input LUTs), 52 M9K memory blocks (~ 52 x 9 Kbit = 468 Kbit raw, with parity overhead yielding 239,616 usable RAM bits), 152 dedicated 18 x 18 hardware multipliers for DSP, four phase-locked loops (PLLs) for clock management, and support for external memory interfaces including DDR/DDR2 SDRAM and QDRII SRAM. The 256-ball FBGA package exposes the device's high-I/O capability with fine-pitch surface-mount routing. Architecture-wise, the Cyclone II device uses a 90 nm CMOS process, 1.15 V to 1.25 V core (VCCINT), and separate VCCIO banks that allow mixed-voltage I/O (1.5 V, 1.8 V, 2.5 V, 3.3 V) on the same die. Embedded multipliers are physically arranged in column blocks adjacent to the LAB (Logic Array Block) rows, enabling deterministic DSP performance independent of routing congestion. The four PLLs support clock multiplication, division, phase shifting, and external feedback for zero-delay buffering. Typical applications include industrial motor control, video processing pipelines, low-cost software-defined radio, consumer display controllers, factory automation, and educational / prototyping platforms. The mid-density 18,752 LE capacity makes it well suited to designs that outgrow CPLDs but do not require the cost of higher-density Cyclone IV or Cyclone V devices. When designing with this device, plan for an external EPCS or EPCQ configuration flash to load the bitstream at power-up, provide proper decoupling on every VCCINT and VCCIO pin per the pin connection guidelines, and verify the package thermal envelope against expected toggle activity. Quartus II Web Edition (legacy) or the latest Quartus Prime Lite Edition supports Cyclone II device compilation. The part is widely available on the secondary market; new designs targeting Intel's modern portfolio should evaluate Cyclone IV E, Cyclone 10 LP, or MAX 10 instead. This page synthesizes distributor pricing, drop-in alternatives from the same Cyclone II family (EP2C20F256C6N, EP2C20F256C7N, EP2C20F256C8) plus verified web-data cross-references (EP2C20F484C6N, EP2C20F484C8), and practical design notes that go beyond the manufacturer handbook.

詢價 聯絡我們
EP2C20F256I8 - Cyclone II FPGA 18,752 LE, 256-BGA | Altera
EP2C20F256I8

EP2C20F256I8 - Cyclone II FPGA 18,752 LE, 256-BGA | Altera

The Altera EP2C20F256I8 is a Cyclone II Field-Programmable Gate Array (FPGA) with 18,752 logic elements, 239,616 bits of embedded RAM, and 152 user I/O pins, delivered in a 256-ball FBGA (256-LBGA) package. It runs from a 1.2 V core supply and is implemented in 90 nm CMOS technology. The "I" in the ordering code denotes industrial temperature grade and the "8" denotes speed grade 8, making this a low-to-mid-density programmable logic device for systems requiring wider operating-temperature margins. An FPGA is an integrated circuit whose logic fabric is configured after manufacturing by loading a configuration bitstream. Instead of executing sequential software, it creates parallel hardware datapaths: designers write HDL, synthesize logic into logic elements, routing and I/O blocks, and configure the device in-system. Cyclone II FPGAs are SRAM-based, so they are volatile and need to reload their bitstream at power-up from flash, a host processor, or an Altera configuration device. In product hierarchy, this part is an FPGA -> SRAM-based FPGA -> mid-range Cyclone II -> Altera programmable logic family. Headline features include 18,752 logic elements, 239,616 RAM bits, and 152 user I/O pins. The 1.2 V core logic family is CMOS, and the 256-ball BGA has a moderate footprint that suits parallel bus designs and controlled-impedance board layouts. The industrial-temperature suffix widens the allowable ambient operating range compared with commercial C-grade siblings. The device supports JTAG and active/passive serial configuration modes, allowing flexible factory programming and in-field updates. Architecturally, Cyclone II places logic in logic array blocks together with embedded memory blocks, and connects the fabric through programmable routing to I/O banks. The 90 nm low-cost process balances density, power, and unit price for cost-sensitive systems. Since Cyclone II is SRAM-based, the non-volatile configuration solution must be selected early; typical choices include an EPC-series configuration device or a host microcontroller that loads the .rbf/.pof image at power-on. Typical applications include industrial control and motor-drive interfaces, communication bridging, video/image preprocessing, test instrumentation, and IoT edge gateways. The 152 I/O pins give designers enough flexibility to connect memories, ADCs, DACs, transceivers, and human-machine-interface peripherals. The 239,616 RAM bits are useful for FIFOs, small line buffers, and coefficient tables, reducing the need for external SRAM in moderate-size designs. Designers should decouple the 1.2 V core rail thoroughly and follow Altera Cyclone II board-layout guidance for the F256 BGA. Because exact current and thermal figures were not included in the fetched distributor data, use the official Cyclone II power calculator and the device handbook to size regulators and heatsinking before production. This page adds distributor context, ordering-code alternatives, and practical design guidance beyond the bare datasheet, helping engineers complete sourcing and design triage more quickly.

詢價 聯絡我們
EP2C20F256I8N - Cyclone II FPGA, 18,752 LEs, 256-FBGA | Intel
EP2C20F256I8N

EP2C20F256I8N - Cyclone II FPGA, 18,752 LEs, 256-FBGA | Intel

The Intel (formerly Altera) EP2C20F256I8N is a low-power Cyclone II Field-Programmable Gate Array (FPGA) featuring 18,752 logic elements, 239,616 bits of embedded RAM, and 152 user I/Os, housed in a 256-ball FineLine BGA (17x17 mm) package. It is fabricated on a 90 nm low-k dielectric CMOS process and operates from a 1.15 V to 1.25 V core supply (1.2 V typical), with a maximum toggle frequency around 402 MHz in the internal logic array. An FPGA (Field-Programmable Gate Array) is a semiconductor device built from a matrix of configurable logic blocks (CLBs), programmable interconnect, and embedded memory blocks. Unlike an ASIC, the FPGA's logic function is defined by a user-supplied bitstream that programs SRAM-based look-up tables and routing switches. FPGAs sit in the programmable logic hierarchy between discrete microcontrollers and fixed-function ASICs, offering hardware-level parallelism for DSP, glue logic, and high-speed interface bridging. The Cyclone II architecture provides four-input look-up tables (LEs), embedded M4K RAM blocks (total 239,616 bits / approximately 117 kbytes), dedicated 18x18 hardware multipliers (up to 52), and four phase-locked loops (PLLs) for clock management. The device supports LVDS, LVTTL, LVCMOS, SSTL, and differential I/O standards, and includes a passive serial, JTAG, or active serial configuration interface. Typical applications include industrial motor control, video processing pipelines, low-cost DSP front-ends, telecom line cards, and consumer electronics prototyping. The Cyclone II family is the second-generation low-cost Altera/Intel FPGA, optimized for high-volume price-sensitive designs where millions of gates are needed but the absolute performance of a Stratix is not required. When designing with this FPGA, attention must be paid to the multi-rail power sequencing (1.2 V core, 2.5 V or 3.3 V PLL analog, and I/O voltage). The 256-FBGA package requires a multi-layer PCB with controlled-impedance traces for high-speed LVDS pairs and proper decoupling to meet signal-integrity requirements. The Quartus II design software (legacy) supports Cyclone II; newer Quartus versions also retain Cyclone II support through device family add-ons. This page synthesizes distributor pricing, cross-reference drop-in alternatives, and practical PCB-level design notes that are not consolidated on the manufacturer datasheet alone.

詢價 聯絡我們