Altera

EP2C15AF256C6N - 14,448-Cell 500 MHz FPGA | Altera

MPN: EP2C15AF256C6N ✓ 啟用中
1.2 V Vdss 256-LBGA Package 500 MHz Speed
MOQ: 1 |

EP2C15AF256C6N 概覽

The Altera EP2C15AF256C6N is a Cyclone II field-programmable gate array with 14,448 logic elements, 152 user I/O, a 500 MHz maximum operating frequency, and a 1.2 V supply in a 256-LBGA package. These specifications place the device between small programmable logic and larger FPGA solutions for cost-sensitive embedded designs requiring deterministic parallel processing.

A field-programmable gate array is a reconfigurable digital semiconductor used to implement logic, state machines, interfaces, and parallel processing functions. The broader hierarchy is FPGA and CPLD, then programmable-logic semiconductor. Unlike fixed-function logic, an FPGA allows its hardware behavior to be changed through a configuration bitstream after manufacture, shortening development cycles and supporting product variants through a common PCB design.

The EP2C15AF256C6N combines 14,448 logic elements with 152 user I/O in a surface-mount 256-LBGA package. Its listed 500 MHz operating frequency supports demanding clocked logic, while 1.2 V core operation suits modern low-voltage digital systems. The commercial temperature grade is listed as 0 to 85 degrees Celsius, making the device appropriate for industrial equipment where operating conditions stay within that range.

Cyclone II devices use configurable logic elements, embedded memory, and programmable interconnect resources to support embedded processing and control architectures. The EP2C15 designation identifies the device family and resource level, while AF256 identifies the 256-ball package. Programming and board bring-up should follow the Cyclone II device-family data sheet and the exact pin-assignment table for this orderable part.

Typical applications include industrial control, communications infrastructure, instrumentation, consumer electronics, embedded control, and parallel signal processing. Its combination of 152 I/O and 14,448 logic elements is useful when a design needs many peripheral connections but does not justify the resources or cost of a much larger FPGA.

The primary layout consideration is the 256-LBGA land pattern. Follow the manufacturer pin-assignment, escape-routing, and decoupling guidance rather than relying on a generic BGA layout. Confirm that the PCB design has adequate fanout from the fine-pitch balls to the component power, ground, configuration, clock, and user-I/O routing layers.

This product record combines the device's key architecture, package, frequency, logic-cell, I/O, temperature, and sourcing information with practical FPGA design guidance and a clearly documented drop-in alternative assessment for engineers evaluating lifecycle and board-compatibility decisions.

直接替換替代品,適用於 EP2C15AF256C6N — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: EP2C15AF256C6N (相同外形與佔位) — 差異在於 Device Type, Logic Elements, Number of User I/O, Package Type, RoHS Status.

Altera
Device Type: Cyclone II field-programmable gate array (FPGA)
Logic Elements: 14,448 LEs
Number of User I/O: 152 I/Os
比較對象 EP2C15AF256C6N →
Altera
Device Type: FPGA (Field Programmable Gate Array)
Number of User I/O: 152
RoHS Status: Compliant (N suffix, lead-free)
比較對象 EP2C15AF256C6N →

EP2C15AF256C6

✅ 直接替換
📦 256-LBGA
Core supply is 1.2 V in both the EP2C15AF256C6N and EP2C15AF256C6, a 0% difference; the orderable suffix differs and must be checked for temperature and commercial-status changes.

📋 參考替代品(不在目錄中)

EP2C15AF256C6N 最大額定值與電氣特性

Device Type Cyclone II Field Programmable Gate Array (FPGA)
Logic Elements 14,448 cells
User I/O Count 152 I/O
Maximum Operating Frequency 500 MHz
Core Supply Voltage 1.2 V
Package Type 256-LBGA
Total Package Pins 256 pins
安裝類型 Surface Mount
工作溫度 0 to 85 C
Manufacturer Altera
Device Family Cyclone II
Programmable Logic Type FPGA

EP2C15AF256C6N 256 pins 腳位配置指南

EP2C15AF256C6N(256 pins 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

EP2C15AF256C6N 的 256 pins 封裝腳位圖

無詳細腳位定義資料: EP2C15AF256C6N.

請參閱 資料表 以查看完整腳位配置。

典型應用

EP2C15AF256C6N 適用於 6 應用s: Industrial PLC Control, Network Interface Equipment, Instrumentation and Data Acquisition, Video and Image Processing, Communications Gateway, Consumer and Embedded Control.

🏭

Industrial PLC Control

EP2C15AF256C6N fits compact programmable-logic controllers because 14,448 logic elements can implement sequencing, timers, interlocks, and machine-state logic while 152 user I/O connect field signals. The 500 MHz maximum operating frequency provides margin for parallel control paths, and the 1.2 V core supply aligns with modern digital power architectures. In a controller, the FPGA can execute deterministic acquisition and control logic beside communication interfaces while remaining within the listed 0 to 85 degrees Celsius range.

🌐

Network Interface Equipment

EP2C15AF256C6N is suitable for protocol bridging, packet processing, and network-interface control where parallel logic and numerous external connections are required. Its 14,448 logic elements support stateful datapaths, while 152 user I/O can connect transceivers, status signals, clocks, and control registers. The 500 MHz device speed helps implement parallel stages efficiently. Designers should use the Cyclone II I/O and clock documentation to establish voltage compatibility, timing margins, and bank constraints.

🔧

Instrumentation and Data Acquisition

EP2C15AF256C6N can implement digital measurement, sampling control, trigger logic, and instrument-control functions in a compact embedded architecture. The 152 I/O support parallel sensor connections and control signals, while 14,448 logic elements accommodate timing, filtering, and data-format conversion functions. Its listed 500 MHz maximum frequency is useful for clocked acquisition pipelines, although achievable system timing depends on the selected speed grade, external memory interface, pin assignments, and routing. Analog front-end design remains separate from the FPGA's digital core.

📺

Video and Image Processing

EP2C15AF256C6N can support parallel image preprocessing, pixel transport, test-pattern generation, and display timing when the design fits its 14,448 logic elements and 152 I/O. Its 500 MHz maximum operating frequency enables clocked pixel pipelines, while the 1.2 V core supply simplifies integration with contemporary logic levels. Video timing, external memory, and high-speed interface constraints must be evaluated against the device-family data sheet. The FPGA is best suited to moderate-resolution parallel processing rather than unrestricted high-bandwidth video engines.

📡

Communications Gateway

EP2C15AF256C6N is appropriate for small protocol gateways that must bridge several serial or parallel interfaces while performing buffering, framing, and routing in hardware. The 14,448 logic elements support concurrent fixed-function pipelines, and 152 I/O provide flexible connectivity for transceivers and control logic. At a listed maximum operating frequency of 500 MHz, the device can meet demanding packet-processing clock rates. Final timing closure requires the actual speed grade, clock tree, I/O standards, board topology, and configuration method.

🧩

Consumer and Embedded Control

EP2C15AF256C6N supports cost-sensitive products that need configurable control logic, user interfaces, and peripheral coordination without a dedicated microcontroller for every function. Its 14,448 logic elements and 152 I/O can consolidate timers, state machines, display control, and communication sequencing, while the 256-LBGA supports dense board layouts. The 1.2 V core operation and 0 to 85 degrees Celsius specification suit controlled consumer and embedded environments. Firmware and configuration storage requirements must be planned alongside the logic design.

What are the key specifications of EP2C15AF256C6N that engineers should know?
The EP2C15AF256C6N is a 14,448-logic-element Cyclone II FPGA with 152 user I/O, a 500 MHz maximum operating frequency, and a 1.2 V core supply. It is packaged in a surface-mount 256-LBGA and specified for 0 to 85 degrees Celsius. According to the Cyclone II device-family data sheet, the package and orderable-part information should be checked together before PCB layout because BGA ball assignments vary by device option.
Where can I download the EP2C15AF256C6N datasheet PDF?
The EP2C15AF256C6N datasheet is available through the linked Cyclone II device-family document and the product references on this page. Use the manufacturer's device-family data sheet for architecture, electrical characteristics, configuration guidance, and package information. The exact N suffix and AF256 package must be matched to the pin-assignment table for EP2C15AF256C6N before assigning PCB connections.
Where can I find the EP2C15AF256C6N pinout and BGA layout?
The EP2C15AF256C6N pinout is documented as a 256-LBGA device in the Cyclone II family documentation and package resources. Start with the orderable-part pin-assignment table, then use the manufacturer's BGA layout and board-design guidelines for escape routing, decoupling, power planes, and thermal construction. Do not infer ball locations from a generic BGA drawing because power, ground, configuration, and user-I/O assignments are device-specific.
Is EP2C15AF256C6N suitable for industrial control systems?
The EP2C15AF256C6N is suitable for industrial control applications when the enclosure remains within its listed 0 to 85 degrees Celsius operating range. Its 14,448 logic elements support control logic and state machines, while 152 user I/O provide connections to sensors, actuators, communications, and human-interface circuitry. The Cyclone II device-family data sheet should be used for configuration, power, clock, and I/O implementation details.
What is the difference between EP2C15AF256C6N and EP2C15AF256C6?
The two entries use the same Cyclone II EP2C15 device designation and AF256 package family, but they are not identical orderable MPN strings. The retrieved technical record identifies EP2C15AF256C6N as the 256-LBGA part operating at 1.2 V and 500 MHz, while the related EP2C15AF256C6 record identifies the base device documentation. Verify the final suffix, temperature grade, package code, and lifecycle status against the manufacturer ordering information.
Can EP2C15AF256C6 be used as a drop-in replacement for EP2C15AF256C6N?
EP2C15AF256C6 is the closest documented same-family candidate, but replacement requires confirmation of the N-suffix meaning and identical ball assignment before treating it as a drop-in. Both identifiers refer to the Cyclone II EP2C15 device in the AF256 package family, with a listed 1.2 V supply. Check the ordering-information, pin-assignment, and temperature-grade tables because a shared package name alone does not establish complete compatibility.
When should I choose EP2C15AF256C6N over a larger Cyclone II FPGA?
Choose EP2C15AF256C6N when a design fits within 14,448 logic elements and 152 user I/O and does not require the additional logic, memory, clocking, or I/O resources of a larger device. The 500 MHz maximum operating frequency supports demanding parallel logic, but the smaller device can reduce board area and system cost. Select a larger FPGA when resource utilization, routing margin, or peripheral requirements exceed the EP2C15 limits.
Is EP2C15AF256C6N appropriate for communications and network interface equipment?
EP2C15AF256C6N can be appropriate for communications equipment when its logic and I/O resources satisfy the design. The 152 user I/O support parallel interfaces and control connections, while the 500 MHz maximum operating frequency allows high-speed clocked logic within the device's specified limits. The Cyclone II device-family data sheet defines speed-grade, bank, I/O, and clock constraints that must be checked against the actual interface requirements.
How many pins does the EP2C15AF256C6N package have?
The EP2C15AF256C6N has 256 package pins in a 256-LBGA configuration. The 256-ball package combines a fine-pitch surface-mount footprint with separate device-specific power, ground, configuration, clock, and user-I/O assignments. Use the manufacturer package drawing and pin table for land patterns, while following the BGA design guidance for pad geometry, mask-defined or solder-mask-defined pads, vias, and assembly tolerances.
What is the power supply voltage of EP2C15AF256C6N?
The EP2C15AF256C6N operates from a 1.2 V core supply. This value is identified in the device-family technical information for the EP2C15 device. External I/O requirements, configuration-interface levels, and any recommended ancillary voltages should be taken from the complete Cyclone II electrical-characteristics tables rather than inferred solely from the 1.2 V core value.
What is the operating temperature range of EP2C15AF256C6N?
The EP2C15AF256C6N is specified for 0 to 85 degrees Celsius, equivalent to 32 to 185 degrees Fahrenheit. This operating range applies when all electrical, thermal, and operating requirements are met. For an industrial enclosure, calculate the internal temperature rise from FPGA dissipation and verify that the worst-case ambient and board temperature remain below the specified limit.
Where to buy EP2C15AF256C6N online?
Use the Request a Quote form on this page to request EP2C15AF256C6N availability, price, and shipment arrangements. The part is identified in the 256-LBGA package and is currently listed by multiple sourcing channels, but live inventory can change by package, tray, and region. Include the exact MPN, target quantity, and required delivery date when requesting a quotation.
What is the price of EP2C15AF256C6N?
The current unit price for EP2C15AF256C6N should be obtained through the Request a Quote form on this page. Pricing can vary with order quantity, package or tray configuration, source, and market conditions, so static figures may not represent an executable quotation. Submit the exact MPN and required quantity to obtain a current commercial response.
What is the lead time and stock status of EP2C15AF256C6N?
Request current EP2C15AF256C6N stock status, minimum order quantity, and lead time through the Request a Quote form on this page. One product listing describes the device as immediately shippable, but inventory and scheduling are time-sensitive and should be confirmed for the requested quantity. State whether the assembly requires trays or another approved shipping format.
What is the best drop-in replacement for EP2C15AF256C6N?
EP2C15AF256C6 is the closest documented drop-in candidate for EP2C15AF256C6N because both use the Cyclone II EP2C15 designation and AF256 package family. Compatibility must still be confirmed at the suffix, ball-assignment, temperature-grade, and lifecycle levels before purchasing. No additional cross-manufacturer replacement with verified pin-to-pin compatibility is documented here, so unqualified alternatives should not be placed on an existing PCB.

工程參考資料,適用於 EP2C15AF256C6N — 比較、設計指引及合規資訊。

選型指南

Choose EP2C15AF256C6N when the design fits within 14,448 logic elements and 152 user I/O, requires a 1.2 V core supply, and can use the 256-LBGA footprint. It is particularly suitable for compact industrial controllers, instrumentation, communications gateways, and embedded control products that benefit from hardware parallelism. EP2C15AF256C6 is the closest documented same-family candidate, but its suffix meaning, temperature grade, lifecycle status, and exact ball assignment must be confirmed before it is treated as a drop-in replacement. Consider a larger FPGA when utilization estimates, routing pressure, memory bandwidth, or external interface requirements exceed the EP2C15 resource limits. Do not choose a differently packaged or unverified device solely for nominal FPGA functionality; pin compatibility, configuration support, I/O standards, timing grade, and long-term availability are essential to an existing design.

與替代品比較

參數 本產品 EP2C15AF256C6
Manufacturer Altera Altera
Package 256-LBGA 256-LBGA
Device Family Cyclone II Cyclone II

主要差異化特點

  • Compact 14,448-cell implementation resource (對比EP2C15AF256C6)
  • High user-interface connectivity (對比EP2C15AF256C6)
  • Defined 500 MHz device speed (對比EP2C15AF256C6)

設計說明

Design the PCB around the manufacturer land pattern for the AF256 package rather than a generic 256-ball BGA. Verify pad dimensions, solder-mask definition, ball-pitch tolerances, and the recommended via arrangement against the Cyclone II package drawing. Fine-pitch escape routing should be planned before placement because power, configuration pins, clocks, and 152 user I/O can make layer transitions difficult if the board stack-up leaves insufficient routing channels.

Separate the 1.2 V core rail from other supply requirements and follow the manufacturer's recommended decoupling and power-plane topology. Place high-frequency decoupling capacitors close to the device's power balls, while maintaining low-impedance connections between the power and ground planes. Calculate total rail dissipation from the selected logic utilization, core voltage, and device speed grade; then verify that the regulator, copper area, vias, and ambient temperature maintain the required core voltage at worst-case load.

Reserve clock and configuration-routing resources during floorplanning. Route the configuration interface away from high-current switching nodes, follow the manufacturer's guidance for configuration pins and pull resistors, and keep sensitive inputs away from noisy power converters and inductors. Because the device has 152 user I/O, assign pins according to supported banks and voltage standards before committing the schematic. This prevents late changes from invalidating the package escape-routing strategy.

Do not treat 500 MHz as a guaranteed system clock without completing timing analysis using the selected speed grade and actual design constraints. Resource utilization, routing congestion, memory interfaces, I/O standards, and clock topology can reduce achievable performance. Likewise, verify the exact EP2C15AF256C6N ordering code against the pin table before releasing PCB artwork, particularly if EP2C15AF256C6 is being considered as a substitute.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No explicit compliance declaration was identified for EP2C15AF256C6N. Confirm RoHS, REACH, halogen-free, and conflict-minerals status with the manufacturer using the exact orderable MPN.

資料驗證日期: 2026-11-14 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

EP2C15AF256C6N EP2C15AF256C6N datasheet EP2C15AF256C6N datasheet pdf EP2C15AF256C6N pinout EP2C15AF256C6N footprint EP2C15AF256C6N equivalent EP2C15AF256C6N replacement EP2C15AF256C6N price EP2C15AF256C6N stock Altera EP2C15AF256C6N EP2C15AF256C6N vs EP2C15AF256C6 EP2C15AF256C6N application circuit

相關元件與詞彙

Altera EP2C15AF256C6N EP2C15AF256C6 Cyclone II FPGA field-programmable gate array programmable logic CPLD logic element user I/O 500 MHz 1.2 V 256-LBGA BGA surface mount SMD industrial control programmable logic controller communications gateway instrumentation video processing embedded control power decoupling configuration interface
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情