EP2C15AF256A7N - 14,448 LEs, 402.58 MHz FPGA | Altera
MPN: EP2C15AF256A7N ✗ 停產EP2C15AF256A7N 概覽
A field-programmable gate array is a semiconductor whose digital logic, memory, and I/O behavior are configured through a programmable bitstream. The EP2C15AF256A7N belongs to the Cyclone II FPGA family, placing it within the broader hierarchy of programmable-logic devices, FPGAs, programmable semiconductors, and digital integrated circuits. Its combination of logic density, device speed, embedded memory, and a large fine-pitch package supports designs requiring parallel data paths, control logic, and programmable interfaces.
The device is manufactured using 90 nm CMOS technology and operates from a 1.2 V core supply. The A7N ordering suffix identifies the device grade and temperature option, while the 256 suffix denotes the 256-pin FBGA package. The automotive designation shown in the product listing indicates that the part is associated with automotive-grade ordering, but the exact qualification wording and temperature limits should be confirmed in the manufacturer documentation before production release.
The 14,448 logic elements provide substantially more programmable capacity than small CPLDs and make the device suitable for multi-module control systems, protocol bridges, industrial controllers, and embedded test equipment. Its 152 I/O count is important when a design needs substantial parallel connectivity, although the exact usable I/O count depends on power-supply configuration, package balls, and the selected device variant.
The 256-LBGA package creates a compact solution but requires careful PCB layout. Power and ground distribution, via-in-pad or via-adjacent decoupling, BGA escape routing, and thermal management are central to achieving reliable operation. Cyclone II FPGAs also require a supported programming and configuration flow, so software tool support, JTAG programming, and memory-interface compatibility should be checked early in the design cycle.
This device is most appropriate when designers need a mid-density Cyclone II FPGA in the 256-LBGA package rather than a modern low-cost FPGA with a different package or pinout. For replacement decisions, validate the pinout, power rails, configuration scheme, JTAG behavior, and Quartus-compatible design constraints rather than relying only on the logic-element count. The related EP2C15AF256I8N and EP2C15AF256C6N parts share the device family and package identifiers, but their suffix-specific operating and qualification characteristics require direct comparison with the exact design requirements.
This page provides a consolidated technical view of the EP2C15AF256A7N, including family positioning, application guidance, design considerations, and clearly identified sourcing information for engineers evaluating the device.
直接替換替代品,適用於 EP2C15AF256A7N — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: EP2C15AF256A7N (相同外形與佔位) — 差異在於 Device Type, Logic Elements, User I/O Count, Core Supply Voltage, Maximum Device Frequency.
EP2C15AF256I8N
✅ 直接替換聯絡詢價
查看資料表 →EP2C15AF256C6N
✅ 直接替換聯絡詢價
查看資料表 →EP2C15AF484A7N
✅ 直接替換聯絡詢價
查看資料表 →EP2C15AF256A7N 最大額定值與電氣特性
| Device Type | Cyclone II field-programmable gate array (FPGA) |
| Logic Elements | 14,448 LEs |
| Maximum Device Frequency | 402.58 MHz |
| User I/O Count | 152 I/Os |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm CMOS |
| 封裝 | 256-LBGA |
| Package Type | FBGA-256 |
| 安裝類型 | Surface mount |
| Programmable Logic Type | FPGA |
| Automotive Association | AEC-Q100 |
| RoHS 狀態 | Compliant |
| Number of User I/O | 152 I/Os |
| Standard Packaging | Tray |
| Device Family | Cyclone II |
EP2C15AF256A7N fbga-256 腳位配置指南
EP2C15AF256A7N(fbga-256 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: EP2C15AF256A7N.
請參閱 資料表 以查看完整腳位配置。
典型應用
EP2C15AF256A7N 適用於 6 應用s: Industrial Control Logic, Communications Interface, Automotive Control Module, Programmable Test Equipment, Video and Image Processing, Embedded Instrumentation.
Industrial Control Logic
The EP2C15AF256A7N fits industrial controllers that require moderate programmable logic density, extensive parallel I/O, and deterministic hardware control. Its 14,448 logic elements can implement multiple state machines, protocol handlers, timing blocks, and supervisory logic, while 152 user I/Os support sensors, actuators, counters, and communication transceivers. The 1.2 V core and 402.58 MHz device-frequency rating provide useful timing headroom for parallel control paths. The 256-LBGA package reduces board area compared with larger leaded packages, but it requires careful power distribution, decoupling, and BGA escape routing. For industrial use, confirm the exact A7N temperature grade and qualification requirements before releasing the design.
推薦
Communications Interface
The EP2C15AF256A7N is suitable for communications equipment requiring programmable data paths, parallel interfaces, and protocol adaptation. The 14,448 logic elements can support framing logic, FIFOs, clock-domain crossing, error checks, and interface adapters, while 152 I/Os provide substantial board-level connectivity. Its 402.58 MHz maximum device frequency is useful for timing-critical datapaths, although realized throughput remains design- and constraint-dependent. The device should be paired with transceiver and clocking components whose interface voltage, protocol, and timing align with the FPGA I/O assignments. BGA layout must preserve high-speed return paths and adequate decoupling, especially around clock and data balls.
推薦
Automotive Control Module
The EP2C15AF256A7N is a candidate for automotive control modules because its ordering code is associated with automotive AEC-Q100 qualification in the product listing. Its 14,448 logic elements can implement body, sensor, or actuator control logic, while 152 user I/Os support vehicle-network interfaces, diagnostics, and discrete sensors. The 90 nm Cyclone II implementation and 1.2 V core supply suit compact embedded logic, but automotive suitability requires more than package fit: the exact temperature grade, AEC-Q100 qualification, failure-rate expectations, and production traceability must be confirmed. The 256-LBGA package also demands automotive-capable assembly processes, inspection, and controlled soldering profiles.
推薦
Programmable Test Equipment
The EP2C15AF256A7N is well suited to compact automated test and instrumentation systems that need configurable sequencing, pattern generation, acquisition control, and interface logic. Its 14,448 logic elements support parallel test channels and control pipelines, while the 402.58 MHz device-frequency rating helps implement time-domain measurement functions and high-speed state machines. The 152 I/Os allow connection to sensors, stimulus drivers, and capture logic without moving to a larger package. Designers should use deterministic clocking, bounded fanout, and carefully planned I/O standards. At 402.58 MHz, routing and clock-quality analysis in Quartus are essential, and test-equipment analog sections should maintain isolation from switching and high-current FPGA supply paths.
推薦
Video and Image Processing
The EP2C15AF256A7N can support parallel video and image-processing functions that require deterministic logic pipelines rather than a large processor core. The 14,448 logic elements can be partitioned across pixel processing, line buffering control, synchronization, and status generation, while 152 I/Os accommodate parallel sensor or display interfaces. The 402.58 MHz maximum device frequency permits multiple pixel lanes at practical video rates when timing closure permits. The 256-LBGA package provides a compact solution with many signal connections, but high-speed routing must account for ball escapes, return-path continuity, and impedance control. External SDRAM or frame-buffer components should be selected according to the required bandwidth, and the complete memory interface must be timing-closed in Quartus.
推薦
Embedded Instrumentation
The EP2C15AF256A7N is appropriate for embedded instrumentation that combines configurable measurement control with flexible I/O and moderate logic capacity. Engineers can use its 14,448 logic elements for sensor conditioning logic, digital calibration, trigger sequencing, and data formatting, while 152 I/Os support multiplexed analog front ends and precision converters. Its 1.2 V core supply and 402.58 MHz device rating support compact, high-performance signal-chain control without a separate microprocessor for every sequencing function. For low-noise analog systems, isolate FPGA supply and return currents from sensitive analog rails, place local decoupling at every supply ball group, and route clock signals away from switching nodes. Confirm the device's I/O voltage capabilities against the selected converters and instrumentation front ends.
推薦
推薦產品摘要
工程參考資料,適用於 EP2C15AF256A7N — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EP2C15AF256I8N | EP2C15AF256C6N | EP2C15AF484A7N |
|---|---|---|---|---|
| Package | 256-LBGA | 256-LBGA | 256-LBGA | FBGA-484 |
| Brand | Altera | Altera | Altera | Altera |
| Logic Elements | 14,448 LEs | 14,448 LEs | 14,448 LEs | 14,448 LEs |
| Maximum Device Frequency | 402.58 MHz | 402.58 MHz | 402.58 MHz | 402.58 MHz |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Ordering Suffix | A7N | I8N | C6N | A7N |
主要差異化特點
- Combines 14,448 logic elements with a 256-LBGA package (對比EP2C15AF484A7N)
- Provides 152 user I/Os in the specified 256-LBGA implementation (對比EP2C15AF484A7N)
- Automotive AEC-Q100 ordering is identified for the A7N configuration (對比EP2C15AF256C6N)
- Targets a 402.58 MHz device-frequency class (對比EP2C15AF256C6N)
設計說明
Use the manufacturer 256-LBGA package drawing and ball map to create the PCB footprint. Plan escape routing for every power, ground, configuration, clock, and user I/O ball before placing other components. Provide continuous power and ground planes, route high-speed clocks as short differential or controlled-impedance paths, and avoid splitting return paths beneath the FPGA. Because the package is fine-pitch, assembly capability and via-in-pad or via-adjacent construction should be selected together with the board fabricator's process requirements.
Place the required core and I/O decoupling capacitors directly at the corresponding supply balls, with separate paths for the 1.2 V core and other required rails. Keep high-current switching-regulator loops away from sensitive FPGA and clock routes. The device's 1.2 V core rating does not describe every rail or its permitted tolerance, so confirm the complete power architecture against the manufacturer datasheet. Validate startup sequencing, rail monotonicity, and voltage limits before powering the assembled board.
Reserve a compact, contiguous configuration-memory interface near the FPGA because configuration data density can affect boot-time routing and signal integrity. Keep JTAG and configuration pins accessible for programming and diagnostics, and check their I/O voltage domains before attaching external tools. For a 402.58 MHz design target, use the Quartus timing report to review clock skew, fanout, and route congestion; the device-frequency figure is a family parameter, not a guarantee for every design.
Treat the 256-LBGA as a heat-transfer challenge because its underside limits top-side airflow and its many solder balls provide the primary thermal path into the PCB. Use a multilayer board with uninterrupted copper beneath the device, thermal vias according to assembly capability, and temperature sensors in critical systems. Validate junction temperature through Quartus power analysis and board-level thermal testing. Do not assume that the compact package permits high switching activity or elevated ambient temperature without thermal margin.
合規資訊
RoHS compliance is identified by the LCSC product record, and the Arrow product listing identifies the device as an automotive AEC-Q100 option. Other compliance attributes are not established by the cited information.