產品(44,000+)

EP2C20F484C6 - Cyclone II FPGA 18,752 LE 484-FBGA | Intel
EP2C20F484C6

EP2C20F484C6 - Cyclone II FPGA 18,752 LE 484-FBGA | Intel

The Intel (formerly Altera) EP2C20F484C6 is a member of the low-cost Cyclone II field-programmable gate array family, fabricated on a 90 nm process and packaged in a 484-ball fine-line BGA. It integrates 18,752 logic elements organized into 1,172 logic array blocks (LABs) and 117 embedded 18x18 multipliers, supported by 239,616 bits of on-chip RAM distributed across M4K blocks. The device exposes 315 general-purpose user I/O pins and supports configuration via serial or parallel flash through Altera's active serial (AS) or JTAG interfaces. A field-programmable gate array (FPGA) is a programmable logic device that combines configurable logic blocks (LBs/LABs), programmable interconnects, and dedicated I/O cells on a single silicon die. In the broader component taxonomy, an FPGA sits under programmable logic -> digital logic -> semiconductor IC. The Cyclone II family targets cost-sensitive, high-volume applications such as industrial control, video processing, and communication bridges, offering ASIC-like integration without the NRE cost. The "EP2C20" prefix encodes family and logic capacity; the "F484" suffix identifies the 484-pin fine-line BGA package, while "C6" denotes the commercial speed grade (slowest, lowest power). Key features include up to 500 MHz internal operation, support for multiple I/O standards (LVTTL, LVCMOS, PCI, SSTL, LVDS), four phase-locked loops (PLLs) for clock management, and a 1.2 V core supply with multi-voltage I/O banks (1.5 V, 1.8 V, 2.5 V, 3.3 V). The Cyclone II architecture is SRAM-based, so an external configuration memory is mandatory at every power-up. Because the part is mature, it has been widely adopted in long-lifecycle industrial designs and university teaching labs. Typical applications include motor-control and servo drive logic in factory automation, video-format conversion and scaling engines, low-cost software-defined peripherals over PCIe, display controllers and LCD drivers, automotive infotainment prototypes, and education platforms for HDL training. Compared with newer Cyclone IV/V devices, EP2C20F484C6 trades lower static power for older I/O and PLLs, but retains the lowest unit cost in the legacy Cyclone family. When designing with EP2C20F484C6, ensure the JTAG chain is correctly buffered and the configuration flash is sized for at least 8 Mbit. The 484-FBGA requires careful PCB layout with via-in-pad microvias and matched-length impedance-controlled traces for DDR or LVDS channels. Refer to the Cyclone II Device Handbook (Section I, Cyclone II Data Sheet) for IO-bank restriction and termination guidelines. This page synthesizes distributor pricing, drop-in alternatives in the same 484-FBGA footprint, and practical PCB-layout notes not duplicated in the manufacturer datasheet, providing design engineers with the cross-reference depth needed for legacy Cyclone II BOM management.

詢價 聯絡我們
EP2C20F484C6N - 18,752 LE Cyclone II FPGA 484-FBGA | Intel
EP2C20F484C6N

EP2C20F484C6N - 18,752 LE Cyclone II FPGA 484-FBGA | Intel

The Intel (formerly Altera) EP2C20F484C6N is a Cyclone II family field-programmable gate array (FPGA) with 18,752 logic elements, 315 user I/Os, and 239,616 bits of embedded RAM, housed in a 484-ball FineLine BGA package with commercial temperature grade. The part suffix 'C6' denotes the speed grade and 'N' indicates a lead-free, RoHS-compliant FBGA. What is a Cyclone II FPGA? A Cyclone II is a low-cost, low-power SRAM-based FPGA fabricated on a 90 nm process. As a programmable logic device it sits in the broader hierarchy of programmable logic > FPGA > SRAM-based FPGA > low-cost FPGA family. Compared with CPLDs and ASICs, FPGAs offer parallel processing, reconfigurable logic, and hardware-level timing control, making them the workhorse for digital signal processing, glue logic, video/image pipelines, and communication interfaces. Key features of the EP2C20F484C6N include 18,752 logic elements distributed across 1,172 logic array blocks, 52 embedded 18x18 multipliers for DSP operations, up to 315 user I/O pins supporting LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards, four phase-locked loops (PLLs) for clock management, and 239,616 bits of embedded RAM organized in M4K blocks. The device supports configuration via passive serial, active serial, or JTAG, and provides dedicated DDR/DDR2 memory interfaces. Architecturally, the Cyclone II uses a logic-element-based fabric with 4-input look-up tables, fast carry chains for arithmetic, and embedded multiplier blocks that enable single-cycle multiply-accumulate operations without consuming general-purpose logic. The four PLLs support frequency synthesis, phase shifting, and external clock conditioning, while the I/O structure provides flexible on-chip termination (OCT) and slew-rate control. Typical applications include industrial motor control and automation, video surveillance and image processing, telecommunications line cards, low-cost ASIC prototyping, embedded control systems, and consumer electronics that require custom logic, DSP, or video bridging. The combination of 18,752 LEs, 52 multipliers, and 315 I/Os at a low price point makes this part attractive for cost-sensitive volume production. When designing with this device, pay attention to configuration scheme selection (AS/PS/JTAG), pin assignment for DDR interfaces, and decoupling strategy for the core and I/O supplies. For long-term designs, note that the Cyclone II family is in the legacy product category - new designs should evaluate Cyclone IV/V or Cyclone 10 LP devices, but the EP2C20F484C6N remains available for ongoing production and maintenance. This page synthesizes distributor pricing, verified specifications, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
EP2C20F484C7 - Cyclone II FPGA 18,752 LE 484-BGA | Intel
EP2C20F484C7

EP2C20F484C7 - Cyclone II FPGA 18,752 LE 484-BGA | Intel

The Intel (formerly Altera) EP2C20F484C7 is a Cyclone II Field-Programmable Gate Array (FPGA) with 18,752 logic elements, 239,616 bits of embedded RAM, and 315 user I/Os, housed in a 484-ball FineLine BGA package with commercial temperature grade. The 'C7' suffix denotes the device speed grade (-7, the slowest Cyclone II speed grade, optimized for lowest cost) and the 'C' denotes the 0°C to +85°C commercial operating range. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit built around a matrix of configurable logic blocks (CLBs) connected via programmable interconnect. Unlike a fixed-function ASIC, an FPGA's logic, memory, and I/O behavior can be redefined after manufacture via a configuration bitstream. FPGAs occupy a unique tier in the system hierarchy: programmable logic -> application-specific integrated circuit -> semiconductor device -> integrated circuit. They sit above microcontrollers in computational density and below ASICs in per-unit cost. Key features include 18,752 logic elements arranged in 4-input look-up tables, 52 embedded 18x18 multipliers for DSP operations, 4 phase-locked loops (PLLs) for clock management, and support for external memory interfaces including DDR, DDR2, SDR SDRAM, and QDRII SRAM. The 484-FBGA package exposes 315 general-purpose I/O pins supporting LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards, enabling high-bandwidth parallel interfaces. The Cyclone II family is fabricated on a 90 nm process technology and uses a SRAM-based configuration cell. Design entry uses the Quartus II (legacy) or Quartus Prime Lite toolchain with Verilog HDL, VHDL, or schematic capture. Each logic element contains a 4-input LUT, a programmable register, a carry chain for arithmetic, and a register chain for shift operations. Typical applications include industrial motor control, video processing bridges, low-cost prototyping platforms, protocol bridging (UART/SPI/I2C to Ethernet), LED display controllers, and educational FPGA development boards where designers value the combination of high logic capacity and low unit cost. When designing, allocate sufficient configuration memory bandwidth (typically an EPCS serial flash device) and provide robust decoupling near the BGA power balls. The 484-FBGA requires at least 4 PCB layers with microvia fan-out for the 1.0 mm pitch ball array. This page synthesizes distributor pricing, drop-in alternatives, comparison data, and practical design notes for the Cyclone II family not always collected in a single datasheet excerpt.

詢價 聯絡我們
EP2C20F484C7N - Cyclone II FPGA, 18,752 LEs, 484-FBGA | Intel
EP2C20F484C7N

EP2C20F484C7N - Cyclone II FPGA, 18,752 LEs, 484-FBGA | Intel

The Intel (formerly Altera) EP2C20F484C7N is a Cyclone II family Field-Programmable Gate Array (FPGA) fabricated on a low-power 90 nm CMOS process, delivering 18,752 logic elements, 239,616 bits of embedded RAM, and 315 user I/Os in a 484-ball FineLine BGA package. Per the Cyclone II Device Handbook, the device is offered in a commercial -7 speed grade and supports a maximum internal clock frequency of 450 MHz with PLL-based clock management. The 'N' suffix denotes lead-free / Pb-free matte tin ball terminations compliant with RoHS requirements. A Field-Programmable Gate Array (FPGA) is a programmable logic device that combines configurable logic blocks (CLBs), programmable interconnects, and dedicated hard IP blocks such as memory and PLLs into a single silicon die. FPGAs belong to the broader hierarchy of programmable logic devices (PLDs) and are widely used as glue logic, co-processors, and prototype ASICs in digital systems. The Cyclone II family sits in the low-cost, low-power tier of the Intel FPGA portfolio, targeting volume applications where cost-per-logic-element is the dominant selection criterion. Key features include 52 embedded 18x18 multipliers, four general-purpose PLLs, 315 maximum user I/Os, and support for multiple I/O standards including LVTTL, LVCMOS, SSTL, and LVDS. The device supports up to 1.5 Mbits of on-chip memory distributed across M4K blocks, enabling high-throughput FIFO and buffering operations without external SRAM. Cyclone II devices use a 4-input look-up table (LUT)-based architecture with embedded multiplier blocks and M4K RAM blocks, providing an efficient balance between logic density and DSP performance. The 90 nm process delivers competitive static and dynamic power characteristics for the family, with multiple low-power modes accessible through the Quartus II design software. Configuration is supported via active serial (AS), passive serial (PS), and JTAG modes using industry-standard EPCS configuration devices. Typical applications include industrial motor control, video processing pipelines, telecommunications line cards, consumer electronics display controllers, and education/hobbyist development platforms. The combination of moderate logic density, abundant I/O, and an FBGA-484 footprint makes it well suited to mid-complexity designs requiring parallel interfaces and on-chip DSP capability. When designing with this device, allocate sufficient PCB area for the 1 mm pitch FBGA-484 footprint and route all 315 user I/Os through at least four signal layers. Use the Quartus II design software with the Cyclone II device library to validate timing closure and resource utilization before committing to layout. The estimated EOL date of 2026 (per industry cross-reference data) means new designs should evaluate Cyclone IV or Cyclone V replacements for long-term production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
EP2C20F484C8 - Cyclone II FPGA 18,752 LE 484-FBGA | Intel
EP2C20F484C8

EP2C20F484C8 - Cyclone II FPGA 18,752 LE 484-FBGA | Intel

The Intel (formerly Altera) EP2C20F484C8 is a member of the Cyclone® II family of low-cost FPGAs fabricated on a 90 nm process. The device integrates 18,752 logic elements, 239,616 bits of embedded RAM organized into M4K memory blocks, and 315 user I/Os in a 484-ball FineLine BGA package. Core operating voltage is 1.2 V with support for multiple I/O standards across 8 I/O banks. What is an FPGA? A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that can be reconfigured by the designer after manufacturing. FPGAs sit between discrete logic and application-specific integrated circuits (ASICs): unlike ASICs they require no fabrication masks, and unlike microcontrollers they implement logic in dedicated parallel hardware rather than sequential firmware. FPGAs are widely used for digital signal processing, glue logic, video/display bridging, and prototype ASIC emulation. Key Cyclone II features include up to 150 embedded 18×18 multipliers, four phase-locked loops (PLLs) for clock management, and support for external memory interfaces including DDR/DDR2 SDRAM and QDRII SRAM. The Cyclone II architecture provides a low-power, cost-optimized platform that was a popular choice in the late-2000s era for consumer, industrial, and communications designs. The 484-FBGA package exposes a high I/O count while maintaining a small PCB footprint suitable for high-density designs. Typical applications include digital video processing pipelines, motor control and industrial automation, telecommunications line cards, test and measurement equipment, and embedded control systems. The combination of embedded multipliers and dedicated memory blocks also makes the EP2C20 well suited for soft-core processor implementations such as Nios II, which Altera provides royalty-free for this family. Designers should consult Altera's Quartus II design software (legacy versions still in use) and the Cyclone II Device Handbook for pin assignments, timing closure, and configuration schemes (AS, PS, JTAG). The EP2C20F484C8 is in production but is positioned as a mature, cost-down device - engineers building new designs should evaluate Cyclone IV or Cyclone V/10 families unless an exact Cyclone II replacement is required for board-level compatibility. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes that are not aggregated in a single place on the manufacturer datasheet. Engineers evaluating this part for new designs or maintenance of legacy Cyclone II hardware will find the alternatives and comparison data here particularly useful.

詢價 聯絡我們
EP2C20F484C8N - 18,752 LE Cyclone II FPGA 484-FBGA | Intel
EP2C20F484C8N

EP2C20F484C8N - 18,752 LE Cyclone II FPGA 484-FBGA | Intel

The Intel (formerly Altera) EP2C20F484C8N is a low-cost Cyclone II Field Programmable Gate Array (FPGA) with 18,752 logic elements, 239,616 bits of embedded RAM (315 Kbits), and 18752 logic array blocks, housed in a 484-ball FineLine BGA package at commercial 0C to 85C temperature range and speed grade 8. An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory/DSP blocks that engineers can reconfigure after manufacture. FPGAs sit in the broader hierarchy of programmable logic devices -> programmable logic -> digital logic ICs -> integrated circuits, offering hardware-level parallelism that microcontrollers and DSPs cannot match. The Cyclone II family targets cost-sensitive high-volume applications by stripping away high-speed transceivers while retaining ample logic, memory, and DSP resources. Key features include 18,752 Logic Elements (LEs), 52 embedded M9K memory blocks (315 Kbits total), 26 embedded 18x18 multipliers for DSP, four phase-locked loops (PLLs) for clock management, and 315 maximum user I/O pins. The device is built on a low-power 90 nm process with 1.2 V core operation and supports multiple I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and HSTL via dedicated True-LVDS circuitry. The Cyclone II architecture uses a four-input look-up table (LUT) based logic element, embedded memory that can be configured as RAM, ROM, or shift registers, and dedicated hardware multiplier blocks. The 315 Kbits of M9K block RAM deliver up to 250 MHz operation, while the 26 18x18 multipliers support up to 250 MHz DSP throughput, making the device suitable for parallel signal processing pipelines. Configuration is handled via passive serial (PS), active serial (AS), or JTAG modes with built-in decompression. Typical applications include industrial motor control, video processing and display controllers, automotive infotainment subsystems, telecommunications line cards, and consumer electronics requiring custom glue logic. The Cyclone II is widely used in cost-sensitive embedded vision, software-defined radio front-ends, and protocol bridging applications. When designing with this part, ensure the 484-ball FBGA land pattern is manufactured on a multilayer PCB with matched-impedance traces and 0.8 mm or finer pitch assembly capability. Thermal management is straightforward since the device typically dissipates under 1.5 W in normal operation. Quartus II design software (legacy 13.0sp1 or earlier) is required for synthesis and place-and-route. This page synthesizes distributor pricing, drop-in Cyclone II and Cyclone IV alternatives, package-level pinout data, and practical FPGA design notes not consolidated on a single manufacturer page.

詢價 聯絡我們
EP2C20F484I6N - Cyclone II FPGA 18,752 LEs 484-FBGA | Intel
EP2C20F484I6N

EP2C20F484I6N - Cyclone II FPGA 18,752 LEs 484-FBGA | Intel

The Intel (Altera) EP2C20F484I6N is a member of the Cyclone II family of low-cost FPGAs, delivering 18,752 logic elements, 239,616 bits of embedded memory, and 315 total user I/O pins in a 484-ball FineLine BGA package. Per the Cyclone II Device Handbook, this industrial-temperature grade device supports up to 150 18x18 multipliers and up to 1.1 Mbits of on-chip RAM, enabling high-performance DSP systems without external memory for many use cases. The I6 speed grade combined with -40C to +100C industrial qualification makes it suitable for harsh-environment embedded designs. A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that the user defines after manufacture using a hardware description language. The Cyclone II family sits in the low-cost, low-power segment of the FPGA hierarchy (FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor), succeeding the original Cyclone series with a 90 nm process and a more efficient adaptive logic module (ALM) architecture. It is designed for high-volume cost-sensitive applications such as consumer electronics, industrial control, video processing, and communications infrastructure where ASIC NRE costs are prohibitive. Key features of the EP2C20F484I6N include 18,752 logic elements arranged in 1,196 logic array blocks (LABs), 52 embedded 18x18 multipliers, 4 PLLs, and 484-pin FineLine BGA package measuring 23x23 mm with 1.0 mm ball pitch. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards, and offers 8 input clock pins plus 16 global clock networks. The 1.2 V core supply combined with industrial temperature grade (-40C to +100C) broadens deployment scenarios versus commercial-only variants. The Cyclone II architecture uses a 90 nm low-k dielectric process with 1.2 V core operation and a four-input look-up table (LUT) logic structure. Embedded memory blocks (M4K) provide true dual-port RAM up to 36 bits wide, and dedicated multiplier blocks handle DSP workloads without consuming general-purpose logic. The device interfaces to common external memories including DDR, DDR2, SDRAM, and QDRII SRAM via dedicated PHY blocks, simplifying high-throughput data buffering. Typical applications for the EP2C20F484I6N include industrial motor control, video surveillance and image processing, low-cost display controllers, software-defined radio front ends, and prototyping interfaces for ASIC verification. With its high logic density at low unit cost, it is well suited to designs that previously would have required multiple CPLDs or a more expensive mid-range FPGA. Designers should plan for 1.2 V core and 3.3 V/2.5 V/1.8 V I/O supply rails, allocate at least eight global clock inputs with proper PLL configuration, and follow Intel/Altera board layout guidelines for the FineLine BGA substrate. Unused pins should be left floating or tied per the device handbook to minimize in-rush current and avoid configuration errors during JTAG or AS programming. This page synthesizes distributor pricing, pin-compatible FPGA alternatives, and practical design notes not found in the manufacturer datasheet alone - cross-referenced against Intel/Altera's official Cyclone II Device Handbook (Volume 1, February 2008).

詢價 聯絡我們
EP2C20F484I8 - Cyclone II FPGA 18,752 LEs 484-FBGA | Intel / Altera
EP2C20F484I8

EP2C20F484I8 - Cyclone II FPGA 18,752 LEs 484-FBGA | Intel / Altera

The Intel (formerly Altera) EP2C20F484I8 is a Cyclone II family Field-Programmable Gate Array (FPGA) IC integrating 18,752 logic elements, 239,616 RAM bits, and 315 user I/Os in a 484-pin FineLine BGA package. It is fabricated on a 90 nm CMOS process and operates at a core voltage of 1.2 V with a maximum internal clock frequency of 402.58 MHz, delivering low-cost, low-power programmable logic for high-volume applications. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs), programmable interconnects, and embedded memory and DSP resources that can be re-programmed by the designer after manufacture. FPGAs occupy the top tier of the digital programmable logic hierarchy: FPGA -> programmable logic -> ASIC alternative -> digital IC. They are valued for parallel processing, deterministic latency, hardware flexibility, and rapid time-to-market versus application-specific fixed-function ASICs. Key features of the EP2C20F484I8 include 18,752 logic elements distributed across 1,196 logic array blocks (LABs), embedded multiplier blocks for low-cost DSP, 4 phase-locked loops (PLLs) for clock management, support for external memory interfaces including DDR/DDR2 SDRAM and QDRII SRAM, and a flexible LVDS/LVCMOS/LVTTL I/O standard mix. The device is offered in the -I8 speed grade with industrial temperature range (-40C to +100C junction). The Cyclone II architecture combines a four-input lookup table (LUT)-based logic fabric with M4K embedded memory blocks and embedded 18 x 18 multipliers. Designers use the Altera/Intel Quartus II design suite for synthesis, place-and-route, timing closure, and bitstream generation. The -I8 industrial-grade speed bin balances timing margin against power consumption for cost-sensitive designs. Typical applications include industrial motor control, video surveillance and image processing, automotive infotainment prototypes, communications line cards, low-cost ASIC prototyping, and consumer electronics such as digital displays and set-top boxes. The 315 I/O count supports wide parallel buses and high-speed LVDS interfaces commonly needed in video and industrial control. When designing with this part, allocate sufficient decoupling (100 nF + bulk) near each power pin, follow the Cyclone II board design guidelines for BGA breakout and impedance-controlled routing, and validate the design in the Quartus II toolchain with industrial-grade timing models. Note that Cyclone II is a mature legacy family - confirm long-term availability before committing to new designs. This page consolidates distributor pricing, drop-in alternatives, and practical design notes that are not readily available from the manufacturer datasheet alone, giving procurement and engineering teams a faster path to qualification and sourcing decisions.

詢價 聯絡我們
EP2C20F484I8N - Cyclone II FPGA, 18,752 LE, 484-FBGA | Intel / Altera
EP2C20F484I8N

EP2C20F484I8N - Cyclone II FPGA, 18,752 LE, 484-FBGA | Intel / Altera

The Intel / Altera (formerly Altera Corporation) EP2C20F484I8N is a member of the low-cost Cyclone II Field Programmable Gate Array (FPGA) family, delivering 18,752 logic elements, 239,616 RAM bits, and 315 user I/O pins in a 484-ball FineLine BGA (FBGA) package. It targets cost-sensitive high-volume digital logic, DSP, and embedded control applications. What is a Cyclone II FPGA? An FPGA (Field Programmable Gate Array) is a programmable semiconductor that engineers can configure after manufacturing using a hardware description language (HDL). Cyclone II is a 90 nm SRAM-based FPGA family optimized for low cost and low power, sitting in the broader hierarchy: FPGA -> programmable logic device (PLD) -> digital logic IC -> semiconductor. Cyclone II devices include embedded 18x18 multipliers suited for DSP, and M4K RAM blocks for on-chip memory. Key features of the EP2C20F484I8N include 18,752 logic elements, 239,616 total RAM bits organized in M4K blocks, 52 embedded 18x18 multipliers, and 4 phase-locked loops (PLLs) for clock management. The industrial-grade speed grade (I8) and industrial temperature range (-40C to +100C ambient) suit harsh-environment deployments. Architecturally, the EP2C20F484I8N is built on a 90 nm process with a 1.2 V core supply and supports multiple I/O standards (LVTTL, LVCMOS, SSTL, HSTL, LVDS, RSDS, mini-LVDS, LVPECL, PCI, PCI-X) via dedicated I/O banks. The device supports configuration via Active Serial (AS), Passive Serial (PS), JTAG, and Fast Passive Parallel (FPP) modes with the Altera/Intel Quartus design toolchain. Typical applications include industrial motor control, video processing pipelines, low-cost DSP co-processors, communications protocol bridging, and embedded system glue logic. The wide I/O count (315) makes it suitable for parallel bus aggregation in video and industrial image systems. Designers should note that the I8 speed grade is one of the slower industrial grades; for higher throughput designs the C8 commercial or C7 grades are recommended. Decoupling, JTAG chain integrity, and configuration scheme selection should be validated against the Cyclone II Device Handbook before tape-out. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design considerations not found in the manufacturer datasheet alone.

詢價 聯絡我們
EP2C20Q240C8 - Cyclone II FPGA, 18,752 LE | Intel
EP2C20Q240C8

EP2C20Q240C8 - Cyclone II FPGA, 18,752 LE | Intel

The Intel EP2C20Q240C8 is a Cyclone II Field Programmable Gate Array with 18,752 logic elements, 239,616 bits of embedded RAM, 142 user I/O pins, a 1.2 V core supply, 90 nm CMOS technology, and a maximum internal clock frequency around 402.58 MHz, supplied in a 240-pin PQFP (240-BFQFP) surface-mount package. A field-programmable gate array (FPGA) is an integrated circuit whose logic fabric can be configured after manufacturing; the Cyclone II family is Altera/Intel's low-cost, high-volume FPGA line built for logic-intensive but cost-sensitive applications. It sits hierarchically under programmable logic devices and integrates configurable logic blocks, embedded RAM, and I/O elements. Understanding Cyclone II as an FPGA rather than a fixed-function ASIC helps designers recognize that the same EP2C20Q240C8 can be reconfigured in-system for motor control, video processing, or communications bridging simply by loading a new bitstream. Key differentiating specifications of EP2C20Q240C8 include 18,752 logic elements, 239,616 bits of embedded memory, and 142 user I/O pins configured in the 240-pin PQFP. DigiKey and FindIC parametric listings identify a typical internal operating frequency of about 402.58 MHz and a 1.2 V core supply. The Cyclone II family also provides enough logic capacity for soft processors and DSP datapaths while maintaining a low-cost footprint. Because this is a commercial-temperature part, the device is rated for 0°C to +85°C and is intended for equipment that does not require extended industrial temperature operation. The EP2C20Q240C8 is fabricated on a 90 nm CMOS process, which was the mainstream low-cost process node of the Cyclone II generation and accounts for the device's moderate static and dynamic power compared with later families. The part is a member of the 18,752-logic-element Cyclone II density tier; it uses a conventional SRAM-based FPGA architecture that must be configured at power-up from an external configuration device, typically an Altera/Intel EPCS serial flash. The architecture includes row and column routing, I/O buffers, and embedded memory blocks that provide the 239,616 bits used for FIFOs and small buffers. Typical applications include industrial motor control, video and image processing, communications line bridging, and test-and-measurement front ends. In each case, the 18,752 LEs can absorb moderate combinational logic and state machines, while the 142 I/O pins let the FPGA connect to sensors, ADCs, DACs, memory devices, and backplane buses. The 1.2 V core keeps power manageable in fan-cooled or naturally ventilated enclosures, and the commercial temperature range suits many indoor equipment installations. From a design standpoint, budget for a clean 1.2 V core supply, one or more I/O-bank supplies, and a configuration device because EP2C20Q240C8 is usually configured from an EPCS serial flash or through JTAG. Because no N suffix appears in the part number, the package finish is not explicitly identified as lead-free in the available listings; choose EP2C20Q240C8N when lead-free/RoHS assembly is required. This page synthesizes distributor stock and pricing, drop-in same-family alternatives, application guidance, and practical power/configuration notes that are not all collected in the manufacturer datasheet. The data was last verified on 2026-09-08 from distributor and cross-reference listings, giving engineers a single decision point for legacy Cyclone II designs.

詢價 聯絡我們
EP2C20Q240C8N FPGA - Cyclone II 18K LE PQFP-240 | Altera
EP2C20Q240C8N

EP2C20Q240C8N FPGA - Cyclone II 18K LE PQFP-240 | Altera

The Altera EP2C20Q240C8N is a mid-density Cyclone II field-programmable gate array (FPGA) built on 90 nm CMOS technology, containing 18,752 logic elements, 239,616 RAM bits, and up to 142 user I/O pins in a 240-pin PQFP (BFQFP) package with lead-free "N" finish. It operates from a 1.2 V core supply and is specified for the 0 °C to +85 °C commercial temperature range. The -8 speed grade provides a commonly quoted maximum clock frequency around 402.58 MHz. An FPGA, or field-programmable gate array, is a programmable logic device whose internal logic blocks, routing resources, and I/O elements can be configured after manufacturing to implement arbitrary digital hardware. In the hierarchy of semiconductor logic, an FPGA belongs to programmable logic devices (PLDs), sitting above simple CPLD products and below custom ASICs in capacity and design flexibility. Cyclone II is Altera/Intel's low-cost FPGA family, optimized for cost-sensitive applications that need thousands of reconfigurable logic elements without the non-recurring engineering cost of a custom chip. Key features of the EP2C20Q240C8N include 18,752 logic elements, 239,616 total RAM bits, and a commercial 0 °C to 85 °C operating range. The 240-pin PQFP package provides 142 user I/O pins, which is practical for moderate bus widths, control interfaces, and bridging applications. As a speed-grade -8 device, it targets main-stream cost-optimized designs rather than the fastest timing closure. The 1.2 V core voltage allows low dynamic power, while I/O banks support common single-ended standards such as LVCMOS and LVTTL. The Cyclone II architecture is based on 4-input look-up-table logic elements grouped into logic array blocks, complemented by embedded memory blocks and dedicated clock networks. The 90 nm process and 1.2 V core helped make mid-density FPGAs affordable for industrial and communications equipment during Cyclone II's production life. The EP2C20Q240C8N is configured through SRAM cells, so it requires an external configuration device such as an EPC or EPCS serial device or a JTAG download cable at power-up. Typical applications include industrial motor/motion control, image and video preprocessing, communication bridging, medical front-end processing, and digital-prototyping boards. In these systems, the EP2C20Q240C8N provides deterministic parallel processing and flexible I/O at a lower cost than a larger FPGA. Its QFP package also supports simpler PCB inspection and rework than fine-pitch BGA alternatives. A critical design consideration is the need for clean 1.2 V core power, separate I/O bank voltages, and a proper configuration scheme chosen by the MSEL pins. Because this is a legacy FPGA family, new designs should verify device lifetime, configuration-device availability, and distributor stock before committing to production. This page synthesizes distributor pricing, same-package drop-in alternatives, application guidance, and practical design notes not found in a simple parametric listing. It helps engineers make faster sourcing and migration decisions for legacy Cyclone II sockets.

詢價 聯絡我們
EP2C20Q240I8N - Cyclone II FPGA, 18,752 LE, 240-Pin PQFP | Intel
EP2C20Q240I8N

EP2C20Q240I8N - Cyclone II FPGA, 18,752 LE, 240-Pin PQFP | Intel

The Intel (formerly Altera) EP2C20Q240I8N is a Cyclone II Field-Programmable Gate Array (FPGA) delivering 18,752 logic elements organized into 1,196 logic array blocks (LABs), housed in a 240-pin Plastic Quad Flat Pack (PQFP) package measuring 28 mm x 28 mm with 0.50 mm terminal pitch. It operates from a 1.2 V core supply (with 3.3 V I/O support per the Vyrian listing) across a commercial 0 °C to 85 °C industrial-temperature grade, and is built on a low-cost CMOS process tailored for high-volume programmable logic designs. A Field-Programmable Gate Array (FPGA) is a reconfigurable semiconductor device whose logic function is defined by the user after manufacture. FPGAs sit within the broader hierarchy: programmable logic device -> programmable logic -> digital IC -> semiconductor. Cyclone II is positioned in the low-cost, high-volume tier of the FPGA taxonomy, targeting price-sensitive applications that still require the parallelism and flexibility of programmable hardware versus fixed-function ASICs. EP2C20Q240I8N delivers up to 402.5 MHz internal operation, combining DSP-friendly embedded multipliers and plentiful logic resources. Key features include 18,752 logic elements, 1,196 LABs, 142 maximum user I/O pins, and an array of embedded 18 x 18 multipliers and M4K RAM blocks. The 240-pin PQFP footprint exposes the part to through-hole-style lead processes while still enabling surface-mount assembly on conventional reflow profiles, making it well suited for legacy as well as new industrial designs. Architecturally, the Cyclone II family uses a 90 nm process node with a 4-input look-up table (LUT) fabric, embedded multiplier blocks, and abundant tri-stated routing. The EP2C20Q240I8N is the higher-density variant of the family, providing roughly 50 percent more logic and memory resources than the EP2C8 sibling while sharing the same Quartus II design flow, IP library, and configuration schemes. Typical applications include industrial motor control, video processing pipelines, low-cost DSP co-processing, communications glue logic, and PCI/PCI Express bridging. Engineers choose EP2C20Q240I8N when they need mid-range FPGA density with a manageable pin count and the broad third-party IP ecosystem that surrounds the Cyclone II family. When designing with EP2C20Q240I8N, plan the PCB for a 28 mm x 28 mm PQFP with 0.5 mm pitch; signal integrity on high-speed clocks is sensitive to trace length matching. Use the Quartus II design software (legacy support required) to take advantage of pre-verified IP cores and the full toolchain. This page synthesizes distributor pricing, drop-in alternatives drawn from the Cyclone II family, and PCB-layout design notes that the manufacturer datasheet alone does not aggregate, giving procurement and design teams a single decision-ready reference.

詢價 聯絡我們
EP2C35F484C6 - Cyclone II FPGA 33K LE 484-FBGA | Intel
EP2C35F484C6

EP2C35F484C6 - Cyclone II FPGA 33K LE 484-FBGA | Intel

The Intel (Altera) EP2C35F484C6 is a Cyclone II family Field-Programmable Gate Array (FPGA) fabricated on a 90 nm low-k process, delivering 33,216 logic elements, 483,840 bits of embedded RAM, and 322 maximum user I/O pins in a 484-ball FineLine BGA package. The device operates from a 1.2 V core supply with I/O banks supporting 1.5 V, 1.8 V, 2.5 V, and 3.3 V LVCMOS/LVTTL interfaces, and is offered in a commercial temperature grade (0 C to +85 C) with -6 speed grade performance. A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that allows hardware designers to implement arbitrary digital logic functions via a configuration bitstream loaded into on-chip SRAM. FPGAs sit within the broader hierarchy of integrated circuits: programmable logic device -> FPGA -> programmable logic -> digital IC -> semiconductor. They differ from ASICs in that they are reprogrammable after manufacture, and from CPLDs in that they contain much larger amounts of distributed and block memory plus dedicated multiplier blocks. The Cyclone II architecture integrates embedded 18 x 18 multipliers (35 total), M4K RAM blocks (105 total, 4 Kbit each), and a global clock network with up to 16 PLLs for flexible clock management. Each logic element (LE) contains a 4-input look-up table, a programmable register, and a carry chain, supporting efficient implementation of arithmetic, register, and state-machine logic at speeds up to 250 MHz internal operation. Configuration is supported via active serial (AS), passive serial (PS), and JTAG modes using the dedicated configuration pins. Typical applications for the EP2C35F484C6 include industrial motor control, video processing pipelines, telecommunications line cards, embedded DSP, and prototyping platforms for ASIC emulation. The 322 user I/O count and 35 dedicated multipliers make it well suited for video buffering and parallel DSP kernels; the low unit cost and Quartus II tool support position it as a mainstream low-cost FPGA for cost-sensitive volume production. When designing with this part, ensure that the four configuration pins (MSEL[3:0]) are strapped to select the desired configuration mode and that VCCINT (1.2 V) and VCCA (2.5 V PLL analog supply) are decoupled with 0.1 uF ceramic capacitors placed within 100 mils of each supply pin. The device is in production; the Cyclone II family has been the workhorse of low-cost FPGAs since 2004, but Intel now positions Cyclone IV/V/10 as the active roadmap successors.

詢價 聯絡我們
EP2C35F484C6N - Cyclone II FPGA 33K LE 484-BGA | Altera / Intel
EP2C35F484C6N

EP2C35F484C6N - Cyclone II FPGA 33K LE 484-BGA | Altera / Intel

The Altera (Intel) EP2C35F484C6N is a Cyclone II family field-programmable gate array (FPGA) housed in a 484-ball fine-line BGA package. It delivers 33,216 logic elements, 483,840 total RAM bits, and 322 user I/O pins, with a core supply of 1.2V and I/O supply of 3.3V. The device is built on a low-power 90 nm CMOS process and supports configuration via passive serial, active serial, and JTAG modes. According to the Cyclone II Device Handbook, the EP2C35 is positioned in the upper-mid density tier of the family, between the EP2C20 and the larger EP2C50/EP2C70. It contains 35 embedded 18x18 multipliers, four phase-locked loops, and 105 M4K RAM blocks. The F484 package variant integrates all 322 user I/Os in a 1.0 mm ball-pitch BGA suitable for high-density prototype boards, evaluation kits, and legacy production lines that still depend on the Cyclone II family. Industrial-grade 'C6N' speed grade parts operate across a commercial 0C to 85C ambient range and target low-volume, long-life industrial and educational platforms. An FPGA (Field-Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory and DSP resources that the user defines via a hardware description language. FPGAs sit at the top of the programmable-logic hierarchy alongside CPLDs and are widely used for parallel signal processing, custom interfacing, glue logic, and prototyping ASICs before mask production. Cyclone II devices use SRAM configuration cells that must be loaded at power-up from a serial configuration flash. The Cyclone II family uses a 1.2V core, 4-input LUT-based logic, and dedicated 18x18 multipliers for DSP. Embedded M4K RAM blocks (4 kbit each) provide true dual-port memory up to 36-bit wide, and four PLLs support clock multiplication, phase shifting, and frequency synthesis. The 484-FBGA package exposes 322 user I/Os supporting LVDS, LVTTL, LVCMOS, SSTL, and PCI I/O standards, plus dedicated clock inputs and global clock networks. Typical applications for the EP2C35F484C6N include industrial motor control boards, factory automation controllers, university digital-logic teaching labs, communications glue logic, video processing pre-processors, and legacy telecom base-band interfaces. The 33,216 logic-element count comfortably supports soft-core processors such as Nios II, custom state machines, and mid-density DSP pipelines. When designing with this part, ensure the configuration flash (EPCS) is sized for the 33K-LE bitstream and that JTAG pin mapping matches the 484-BGA pinout. Decoupling follows the standard 1.2V core / 3.3V I/O split, and unused user I/Os should be left floating or driven to a defined logic level per Cyclone II guidelines. This page synthesizes distributor pricing, same-brand Cyclone II drop-in variants, and Cyclone II-specific design notes not consolidated in any single manufacturer document.

詢價 聯絡我們
EP2C35F484C7 - Cyclone II FPGA 33K LE 484-FBGA | Intel
EP2C35F484C7

EP2C35F484C7 - Cyclone II FPGA 33K LE 484-FBGA | Intel

The Intel (Altera) EP2C35F484C7 is a Cyclone II Field-Programmable Gate Array (FPGA) delivering 33,216 logic elements, 483,840 bits of embedded memory, and 35 embedded 18x18 multipliers, housed in a 484-pin FineLine BGA (FBGA-484) package. Built on a 90 nm low-k dielectric CMOS process, the Cyclone II family balances density, performance, and cost for high-volume, logic-rich applications. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnects, and dedicated silicon resources such as block RAM (BRAM) and DSP blocks. FPGAs sit within the broader category of programmable logic devices (PLDs), bridging the gap between fixed-function ASICs and software-programmable microcontrollers. The Cyclone II architecture organizes logic into Logic Array Blocks (LABs) of 16 Logic Elements (LEs) each, with embedded memory columns and multiplier blocks distributed across the fabric to minimize routing delay and maximize deterministic performance. Key features of the EP2C35F484C7 include 322 maximum user I/O pins, four phase-locked loops (PLLs) for clock management, support for external memory interfaces such as DDR, DDR2, and QDRII SRAM, and a flexible configuration scheme supporting JTAG, Passive Serial (PS), and Active Serial (AS) modes. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards, enabling direct interfacing with modern processors, memories, and high-speed peripherals. Typical applications for the EP2C35F484C7 span cost-sensitive digital signal processing, motor control, industrial automation, video processing, and protocol bridging. The combination of 33K logic elements, 35 hardware multipliers, and 484-ball FBGA packaging makes the device particularly attractive for medium-density DSP pipelines, motor and motion controllers, and telecommunications infrastructure where deterministic hardware-level processing outperforms general-purpose processors. When designing with this Cyclone II device, engineers should leverage the Altera/Intel Quartus II design suite for synthesis, place-and-route, and timing closure. The FBGA-484 package requires careful PCB layout with controlled-impedance traces, matched-length nets for DDR interfaces, and multiple decoupling capacitors placed close to each power pin to maintain signal integrity at the device's high toggle rates. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not found in a single manufacturer datasheet view. According to the Cyclone II Device Handbook, the EP2C35F484C7 is supported by Quartus II versions 7.2 through 13.0sp1, providing long design-software continuity for legacy and industrial deployments.

詢價 聯絡我們
EP2C35F484C7N - Cyclone II FPGA, 33K LEs, 484-FBGA | Intel (Altera)
EP2C35F484C7N

EP2C35F484C7N - Cyclone II FPGA, 33K LEs, 484-FBGA | Intel (Altera)

The Intel (formerly Altera) EP2C35F484C7N is a Cyclone II Field-Programmable Gate Array (FPGA) integrating 33,216 logic elements (LEs), 483,840 bits of embedded RAM, and 322 user I/O pins in a 484-ball FineLine BGA (FBGA) package. Built on a low-cost 90 nm CMOS process, the device operates from a 1.2 V core supply with separate VCCIO bank rails and supports system frequencies up to approximately 402 MHz through its global clock tree. What is a Cyclone II FPGA? The Cyclone II family is Intel's (originally Altera's) second-generation low-cost SRAM-based FPGA series, positioned below the Stratix high-performance line. As an FPGA, the EP2C35F484C7N belongs to the broader category hierarchy of programmable logic device (PLD) -> FPGA -> SRAM-based FPGA -> low-cost FPGA. It targets cost-sensitive, volume-production designs where ASIC NRE is not justified, providing parallel logic, embedded memory blocks (M4K), and DSP blocks (multipliers) on a single reconfigurable fabric. Key features include up to 35,000 LEs, 35 embedded 18x18 multipliers (DSP blocks) suitable for low-density signal processing, four phase-locked loops (PLLs) for clock synthesis and skew management, and support for external memory interfaces including DDR, DDR2, and QDRII SRAM through dedicated DQS pins. The device consumes approximately 200 mW of static power and supports hot-socketing and configuration via JTAG, AS, PS, or PPA modes. Typical applications include industrial motor control, video processing pipelines, low-density wireless baseband logic, consumer electronics glue logic, and PCI/PCI Express endpoint bridges. The 484-FBGA package provides ample I/O count for memory-bus fan-out and parallel sensor aggregation. Design tip: Use Intel's Quartus II (or the open-source Yosys + nextpnr flow for cost-limited builds) for synthesis, placement, and timing closure. Place decoupling capacitors within 5 mm of every VCC/VCCIO/VCC_PLL power pin and provide a continuous ground plane beneath the BGA to suppress SSO noise. This page synthesizes distributor pricing, drop-in Altera Cyclone II alternatives, and practical Quartus II design notes not collected in a single location on the manufacturer datasheet.

詢價 聯絡我們
EP2C35F484C8 - Cyclone II FPGA 33K LEs 484-FBGA | Intel / Altera
EP2C35F484C8

EP2C35F484C8 - Cyclone II FPGA 33K LEs 484-FBGA | Intel / Altera

The Intel / Altera EP2C35F484C8 is a member of the low-cost Cyclone II FPGA family, offering 33,216 logic elements (LEs), 483,840 bits of embedded RAM, and 322 total pins (35 user I/O banks support up to 322 user I/Os) in a 484-ball FineLine BGA (FBGA-484) package. It targets cost-sensitive high-volume applications where ASIC-class integration is required without ASIC NRE, including industrial control, video processing, and communications line cards. Background: A Field Programmable Gate Array (FPGA) is a semiconductor IC built around an array of configurable logic blocks (CLBs / LEs) connected by programmable interconnect. FPGAs sit in the programmable logic hierarchy alongside CPLDs, with FPGAs offering higher logic density and richer DSP/memory resources. The Cyclone II family positioned Intel/Altera in the low-cost FPGA segment, providing ASIC-level integration at FPGA pricing for consumer, industrial, and wireless applications. Key features include 35 embedded 18x18 multipliers for DSP, up to 4 PLLs per device for clock management, support for external memory interfaces including DDR/DDR2/QDRII SDRAM, and 1.2V core operation with hot-socketing support. Configuration is handled via passive serial (PS), fast passive parallel (FPP), active serial (AS), or JTAG modes, supported by industry-standard Quartus II design tools. The device is fabricated on a 90nm low-k CMOS process. Typical applications include video surveillance and image processing pipelines, industrial motor control and factory automation controllers, low-cost wireline/wireless baseband processing, PCI/PCI-X bridge designs, and display controllers. The combination of high logic density, embedded multipliers, and broad memory interface support makes the EP2C35F484C8 particularly well-suited to mid-complexity DSP and control-plane designs. Design consideration: Successful PCB layout requires careful attention to the 484-ball BGA fanout, power distribution (VCCINT 1.2V, VCCIO banked 1.5V/1.8V/2.5V/3.3V), and decoupling. Use a multi-layer PCB with dedicated power and ground planes; place 0.1uF and 10uF decoupling capacitors close to each power pin. The Cyclone II datasheet provides reference board layouts and signal-integrity guidelines that should be followed. This page synthesizes distributor pricing, drop-in same-family variants, and practical FPGA design notes not aggregated in a single manufacturer document.

詢價 聯絡我們
EP2C35F484C8N - Cyclone II FPGA, 33K LEs, 484-FBGA | Intel
EP2C35F484C8N

EP2C35F484C8N - Cyclone II FPGA, 33K LEs, 484-FBGA | Intel

The Intel (formerly Altera) EP2C35F484C8N is a low-cost Cyclone II family FPGA delivering 33,216 logic elements, 483,840 bits of embedded memory (M4K blocks), and 322 user I/Os in a 484-pin FineLine BGA package. Built on a 90 nm process, it operates from a 1.2 V core supply and supports up to four phase-locked loops with performance rated up to 402 MHz internal operation. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit whose logic function is defined after manufacturing through user programming. FPGAs occupy a unique tier in the digital design hierarchy: more capable than discrete logic (74-series gates) and CPLDs (Complex Programmable Logic Devices), but lower-cost and lower-power than ASICs (Application-Specific Integrated Circuits). They are widely used for glue logic, digital signal processing front-ends, custom peripheral buses, and pre-ASIC prototyping. Within that taxonomy, the Cyclone II series specifically targets cost-sensitive, high-volume applications where every logic element and I/O pin must be maximized per dollar. Key features include 35,000 LEs (the Cyclone II nomenclature counts logical resources slightly above the LE name, equivalent to roughly 33K fully-routed logic elements), up to 483,840 RAM bits arranged in 4-kbit M4K blocks supporting true dual-port operation, and 35 embedded 18x18 multipliers for DSP applications. The device also includes four PLLs and supports LVDS I/O standards on selected pins. The Cyclone II architecture uses a 2D row/column interconnect backed by SRAM configuration memory. Its 90 nm process allows high logic density at low static power. Configuration is loaded from a passive serial, JTAG, or EPCS configuration device. The 484-FBGA package exposes 322 user I/Os, giving designers generous headroom for memory buses, video interfaces, and parallel connectivity. Typical applications include industrial motor control, video processing and display bridges, telecom line cards, low-cost DSP co-processing, and pre-silicon ASIC prototyping. The combination of abundant DSP blocks and external memory interfaces makes it well suited to image-pipeline front-ends. Per the manufacturer datasheet, the EP2C35F484C8N speed grade 8 corresponds to a -8 commercial temperature rating, balancing timing margin against cost. When designing with this device, plan a multi-rail power tree for 1.2 V VCCINT, 3.3 V VCCIO, and PLL analog supplies, with careful decoupling on every VCCIO bank. The 484-FBGA demands a multi-layer PCB with microvia-in-pad stackup; signal integrity on LVDS pairs requires matched-length routing. Although the part is mature, lead-time and lifecycle pressure have shifted many new designs to Cyclone IV or Cyclone V equivalents. This page synthesizes distributor pricing, drop-in alternatives from the Cyclone II family, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
EP2C35F484I6N - 33K LE Cyclone II FPGA, 484-FBGA | Intel
EP2C35F484I6N

EP2C35F484I6N - 33K LE Cyclone II FPGA, 484-FBGA | Intel

The Intel EP2C35F484I6N is a low-cost Cyclone II field-programmable gate array (FPGA) from the Altera Cyclone II device family, delivering 33,216 logic elements, 484 maximum user I/O pins, and 1.1 Mbit of on-chip embedded memory in a 484-ball fine-pitch BGA (FBGA-484) package. Built on a 1.2 V CMOS process, it operates across an industrial temperature range of -40C to +85C and supports a maximum internal clock frequency of approximately 402.5 MHz. The device integrates up to 150 embedded 18x18 multipliers for DSP operations and high-speed external memory interfaces for DDR/DDR2 SDRAM and QDRII SRAM. An FPGA (field-programmable gate array) is a reconfigurable semiconductor device whose logic function is defined by a customer-supplied bitstream rather than hard-wired during fabrication. The Cyclone II family sits within the broader programmable logic taxonomy: FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor. Unlike microcontrollers which execute sequential firmware, FPGAs implement parallel hardware logic that can be updated in the field, making them ideal for prototyping, low-volume production, and applications where hardware parallelism outperforms software. The EP2C35 specifically targets the mid-density segment with 33K logic elements, balancing cost per logic element against capability. Key features of the EP2C35F484I6N include 2,100 Logic Array Blocks (LABs) organized in 33,216 logic elements (LEs), 483,840 bits of embedded RAM (M4K blocks), 4 phase-locked loops (PLLs) for clock management, and 315 embedded 18x18 multipliers in the Cyclone II family (the EP2C35 provides 35 embedded multipliers per Cyclone II datasheet). The device supports multiple I/O standards including LVDS, SSTL, HSTL, PCI, and PCI-X through configurable user I/O banks. Its 1.2 V core voltage with 1.2 V/2.5 V/3.3 V I/O supplies enables mixed-voltage system design. The Cyclone II architecture uses a 4-input look-up table (LUT) based logic element with a dedicated carry chain, distributed M4K memory blocks, and embedded multiplier blocks. This heterogeneous fabric allows efficient implementation of arithmetic DSP pipelines, FIFO buffers, and state-machine control logic without external components. The PLLs provide clock multiplication, division, phase shifting, and duty-cycle correction for interfacing with external memory and high-speed peripherals. Typical applications for the EP2C35F484I6N include industrial motor control, video processing and image filtering, telecommunications line cards, software-defined radio DSP front-ends, and automotive driver-assistance prototypes. Designers choose the EP2C35 when they need a balance of logic density, DSP performance, and BGA packaging for high-pin-count systems. The 484-ball FBGA package supports the maximum user I/O count of the device, enabling wide parallel buses and multiple high-speed serial interfaces simultaneously. When designing with this device, engineers should follow Intel/Altera board layout guidelines for BGA fanout, power-plane decoupling, and PLL analog supply isolation. The Quartus II design suite (now Intel Quartus Prime) provides synthesis, place-and-route, and timing analysis for the Cyclone II family. Because the EP2C35F484I6N is a mature part originally launched circa 2005, engineers should verify current lifecycle status before new design starts. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the Cyclone II family, and practical board-level design notes not found in the manufacturer datasheet alone. It is intended for engineers evaluating mid-density FPGAs for cost-sensitive parallel-processing designs.

詢價 聯絡我們
EP2C35F484I7N - Cyclone II FPGA 33K Logic Elements FBGA-484 | Intel / Altera
EP2C35F484I7N

EP2C35F484I7N - Cyclone II FPGA 33K Logic Elements FBGA-484 | Intel / Altera

The Intel / Altera EP2C35F484I7N is a Cyclone II family Field Programmable Gate Array (FPGA) delivering 33,216 logic elements, 484 maximum user I/O pins, and 483,840 total RAM bits in a 484-ball FineLine BGA (FBGA-484) package. It is fabricated on a low-power 90 nm CMOS process and operates across an industrial temperature range of -40C to +85C (the I7 speed/temperature grade). The device integrates up to 150 embedded 18 x 18 multipliers, supporting high-performance yet low-cost DSP implementations. A Field Programmable Gate Array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected via programmable interconnect. Within the broader hierarchy, FPGAs sit under programmable logic devices (PLDs) and digital ICs, complementing ASICs by offering hardware re-programmability, fast time-to-market, and parallel DSP capability for signal-processing and control-plane workloads. Key features of the EP2C35F484I7N include 33,216 logic elements organized into 2,100 logic array blocks, 35 embedded M9K memory blocks (483,840 RAM bits total), up to 150 18 x 18 hardware multipliers for DSP, and 4 phase-locked loops for clock management. The device supports high-speed external memory interfaces including DDR, DDR2, and QDRII SRAM. Configuration is handled through passive serial, active serial, or JTAG modes. Typical applications include digital signal processing, video processing pipelines, industrial motor control, software-defined radio, communications infrastructure, and prototyping of custom ASIC designs. The wide logic capacity makes it suitable for high-throughput parallel processing tasks. When designing with this device, ensure proper power-supply decoupling across VCCINT, VCCA, and VCCIO rails, and provide adequate thermal relief on the PCB. Signal-integrity planning is critical for DDR2/QDRII interfaces at full speed.

詢價 聯絡我們
EP2C35F484I8 - 33,216-Cell, 1.2V Cyclone II FPGA | Intel
EP2C35F484I8

EP2C35F484I8 - 33,216-Cell, 1.2V Cyclone II FPGA | Intel

Intel EP2C35F484I8 is a Cyclone II field-programmable gate array with 33,216 logic cells, 483,840 bits of embedded memory, 322 user I/Os, and a 1.2 V supply in a 484-ball FBGA package. Verified distributor data identifies the device as a 484-BGA FPGA, while Arrow additionally specifies a 402.58 MHz frequency and tray packaging. The I8 ordering-code data indicates an industrial operating-temperature grade, and DigChip gives an operating range of 0 °C to 85 °C. Exact package dimensions, configuration-memory size, embedded multiplier count, PLL count, speed grade, I/O-bank count, and supported I/O standards are not present in the supplied excerpts and therefore require datasheet verification. A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, routing resources, and specialized functional blocks. Unlike a fixed application-specific integrated circuit, an FPGA can implement changing digital logic, interface protocols, control functions, and signal-processing datapaths through a user-generated configuration. Within programmable logic, the hierarchy is FPGA, programmable logic IC, configurable logic device, and integrated circuit. The Cyclone II family combines high logic capacity with embedded memory resources for cost-sensitive digital systems. The headline capacity of 33,216 logic cells supports substantially larger state machines, parallel datapaths, and multi-interface bridges than smaller programmable devices. Its 483,840 memory bits provide on-chip storage for FIFOs, lookup tables, buffers, and control records. A 322-I/O budget permits connection to numerous external memories, data converters, communications peripherals, and control signals. The 1.2 V core supply and 484-FBGA package are central to power-distribution, signal-integrity, and board-layout decisions. The EP2C35 device architecture is configured after board assembly through an external configuration process; exact supported configuration modes and pins must be obtained from the complete manufacturer datasheet before schematic release. The supplied datasheet excerpt states that the EP2C35 I/O count includes 16 dedicated clock pins that can also be used as data inputs. Clock planning therefore should distinguish package I/O capacity from general-purpose user-I/O requirements rather than treating all 322 pins as identical. Typical applications include industrial automation controllers, communications-interface equipment, test and measurement systems, and digital-video or display controllers. These systems benefit from parallel processing, reconfigurable interfaces, and the device's 33,216-cell capacity, 483,840 embedded memory bits, and 322 I/Os. Designers must still validate timing closure, configuration circuitry, termination, decoupling, and signal integrity against the target speed grade and complete Cyclone II datasheet. The most important procurement concern is that the supplied search identifies this mature Cyclone II device but provides no explicit lifecycle statement. Treat lifecycle status as unknown until confirmed from an official Intel product record. No verified cross-reference result establishes a pin-compatible drop-in replacement, so alternatives are limited rather than padded with functional or cross-package devices. This data synthesis adds verified purchasing links, package-aware replacement analysis, application guidance, and clearly marked datasheet gaps beyond a typical distributor listing. Prices are quoted as of 2026-09-08 from the only supplied unit-price snippet, while stock and lead time remain source-specific.

詢價 聯絡我們
EP2C35F484I8N - Cyclone II FPGA, 33K LEs, 484-BGA | Intel
EP2C35F484I8N

EP2C35F484I8N - Cyclone II FPGA, 33K LEs, 484-BGA | Intel

The Intel (formerly Altera) EP2C35F484I8N is a Cyclone II family Field-Programmable Gate Array (FPGA) housed in a 484-ball FineLine BGA package with 33,216 logic elements, 483,840 bits of embedded RAM (M4K blocks), 33216 logic cells, and 322 total pins of which up to 322 are user I/O. According to the manufacturer datasheet family overview, the Cyclone II family extends the low-cost FPGA density range up to 68,416 logic elements with up to 622 usable I/O pins and up to 1.1 Mbits of embedded memory, fabricated on a 90 nm process and operating from a 1.2 V core supply. The I8N suffix indicates the industrial temperature grade (-40C to +100C junction) and a lead-free, RoHS-compliant package. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) that belongs to the broader hierarchy: programmable logic device -> logic IC -> integrated circuit. Unlike an ASIC, an FPGA's logic fabric, routing, and I/O can be reconfigured by the designer after manufacture, making FPGAs ideal for prototyping, low-volume production, and designs requiring parallel processing, custom I/O timing, or in-field firmware updates. Cyclone II is positioned as a low-cost, high-volume FPGA for cost-sensitive applications such as digital signal processing, communications, industrial control, and embedded processing. Key features of the EP2C35F484I8N include 33,216 logic elements and 483,840 embedded RAM bits arranged in M4K blocks, four general-purpose PLLs for clock synthesis and management, and 322 user I/O pins supporting LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards. The device is supported by the Altera/Intel Quartus II design suite, which provides synthesis, place-and-route, timing analysis, and IP core integration. Configuration is supported via active serial (AS), passive serial (PS), JTAG, and Fast Passive Parallel (FPP) modes with the EPCS serial configuration device family. The Cyclone II architecture combines a logic array based on 4-input look-up tables (4-LUTs) with embedded multiplier blocks and M4K memory blocks for efficient DSP and buffering. The 90 nm CMOS process provides a balanced trade-off between density, performance, and static power consumption. Internal signal integrity is preserved through dedicated routing channels and predictable timing closure, while the Quartus II toolchain enables iterative design refinement against timing constraints up to several hundred MHz depending on logic utilization. Typical applications include industrial control and motor drive systems, video processing and image acquisition pipelines, communications protocol bridging (UART, SPI, I2C, PCIe, Ethernet MAC), consumer electronics with custom video or display interfaces, and educational or prototype development boards. The 322 available I/O pins in the F484 package make the device well suited to designs requiring parallel data buses, multiple ADC/DAC interfaces, or wide memory buses to external SRAM/SDRAM. When designing with the EP2C35F484I8N, ensure that the 1.2 V core and 3.3 V/2.5 V/1.8 V I/O supplies are properly decoupled with 100 nF and 10 uF capacitors placed close to the power balls, and follow Intel/Altera's PCB layout guidelines for BGA fanout to maintain signal integrity on high-speed LVDS pairs. This page synthesizes distributor pricing, drop-in Cyclone II and Cyclone IV/FPGA alternatives, PCB layout notes, and design considerations not found in the manufacturer datasheet alone.

詢價 聯絡我們
EP2C35F672C6 - Cyclone II FPGA 33K LE 672-FBGA | Intel
EP2C35F672C6

EP2C35F672C6 - Cyclone II FPGA 33K LE 672-FBGA | Intel

The Intel (formerly Altera) EP2C35F672C6 is a Cyclone II family Field-Programmable Gate Array (FPGA) delivering 33,216 logic elements, 483,840 bits of embedded RAM, and 475 user I/O pins, housed in a 672-ball FineLine BGA package. Built on a 90 nm low-k dielectric CMOS process, it features four phase-locked loops (PLLs) and supports up to 260 MHz internal operation, making it a high-density, low-cost programmable logic solution for cost-sensitive applications. A Cyclone II FPGA is a SRAM-based programmable logic device that allows designers to implement custom digital logic, signal processing, and embedded processor subsystems after PCB fabrication. It belongs to the broader category of programmable logic devices (PLDs), sitting alongside CPLDs, FPGAs, and structured ASICs. Compared with its predecessor Cyclone I, the Cyclone II family roughly doubled logic density while targeting the same low-power, high-volume end of the market. Key features include 33,216 LEs, 483,840 total RAM bits distributed across M4K memory blocks, 70 embedded 18x18 multipliers for DSP operations, four PLLs with multiple output taps, and 475 user I/O pins. The device supports common I/O standards including LVTTL, LVCMOS, PCI, SSTL, and LVDS, with per-pin programmable drive strength and slew-rate control. Cyclone II uses a 90 nm process node with a 1.2 V core supply and offers dedicated hardware multipliers and M4K block RAM that allow efficient implementation of FIR filters, FFTs, video pipelines, and embedded Nios II soft processors. The part number suffix indicates the C6 speed grade (commercial temperature range, approximately -40C to +85C ambient). Typical applications include industrial motor control, video processing and surveillance, telecommunications line cards, embedded industrial controllers, and educational/development platforms. The high I/O count (475) and large memory (483 Kbits) make it well suited for parallel bus interfacing and data-pipeline processing. When designing with the EP2C35F672C6, engineers should plan the power distribution network carefully: Cyclone II requires multiple supply rails (VCCINT, VCCA, VCCIO per bank) and the 672-ball FBGA demands a multilayer PCB with microvia technology. Use the Quartus II design software for synthesis, place-and-route, and timing closure. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers an actionable reference beyond what Altera/Intel provides in their legacy Cyclone II handbook.

詢價 聯絡我們
EP2C35F672C6N - 33K LE Cyclone II FPGA, 672-FBGA | Intel / Altera
EP2C35F672C6N

EP2C35F672C6N - 33K LE Cyclone II FPGA, 672-FBGA | Intel / Altera

The Intel / Altera EP2C35F672C6N is a 33,216-logic-element member of the Cyclone® II FPGA family, housed in a 672-ball FineLine BGA package and built on a 90-nm low-k dielectric CMOS process. The device integrates 33,216 logic elements, 483,840 bits of embedded RAM, 33216 logic cells, and 475 user I/O pins, and operates from a 1.2 V core supply with a commercial 0°C to 85°C junction temperature range. What is an FPGA? A Field Programmable Gate Array (FPGA) is a programmable logic device whose architecture is built from an array of configurable logic blocks (CLBs), embedded memory blocks, multiplier/DSP blocks, and a programmable interconnect fabric. In the electronic component hierarchy, an FPGA sits between a microcontroller and a custom ASIC: like a microcontroller it is software-configurable and low-NRE, but like an ASIC it can run truly parallel logic at multi-hundred-MHz clock rates. The Cyclone II family targets cost-sensitive high-volume applications such as digital signal processing, video bridging, and custom peripheral interfaces. Key features include 4 embedded PLL blocks for clock synthesis and skew management, 35 embedded 18×18 multipliers for DSP workloads, a 4-Mbit on-chip RAM subsystem, and support for external memory interfaces including DDR/DDR2 SDRAM and QDRII SRAM. The LVDS / LVTTL / SSTL / HSTL I/O bank architecture supports single-ended and differential signalling up to 475 I/O, with per-bank reference voltage support. Architecturally, the Cyclone II device family uses a 4-input look-up-table (4-LUT) logic element, dedicated carry chains for fast arithmetic, and Altera's Logic Array Block (LAB) grouping of 16 LEs. Configuration is via the Altera Passive Parallel (PP), Passive Serial (PS), Active Serial (AS), or JTAG modes, with configuration bitstream loaded from EPCS serial configuration devices or a microcontroller. Typical applications include industrial motor control, video format conversion, protocol bridging (PCI to local bus, UART to I2S), soft-core processor platforms (Nios II), and high-volume consumer electronics. The 475 I/O count and 33K LE capacity make the EP2C35F672C6N a mid-range workhorse for designs that need more logic than a CPLD but less than a high-end Cyclone IV or V device. When designing with this part, ensure the PCB has a minimum of six PCB layers with dedicated ground and 1.2 V / 2.5 V / 3.3 V power planes to meet signal-integrity and decoupling guidelines in the Cyclone II device family handbook. The 672-FBGA requires a 1.0 mm ball pitch and reflow profile compatible with lead-free SAC alloy. This page synthesises distributor pricing, drop-in compatible Cyclone II family members, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們