EP2C35F672C7
EP2C35F672C7 - Cyclone II FPGA 33K LE 672-BGA | Intel
The Intel (Altera) EP2C35F672C7 is a member of the Cyclone II family of low-cost FPGAs, delivering 33,216 logic elements, 483,840 bits of embedded RAM, and 475 user I/O pins in a 672-ball FineLine BGA package at the commercial speed grade 7. Built on a 90 nm low-k dielectric CMOS process, the Cyclone II family targets high-volume, cost-sensitive applications where ASIC-class integration is uneconomical, and the EP2C35 sits at the upper end of the density range for the series.
An FPGA (Field-Programmable Gate Array) is a reconfigurable digital integrated circuit containing an array of programmable logic blocks, embedded memory blocks, phase-locked loops, and a programmable interconnect fabric. The Cyclone II family is positioned within Intel's broader programmable logic hierarchy as the entry-to-mid-range tier, sitting above the original Cyclone and below the Stratix/Arria/Cyclone IV families. FPGAs enable parallel hardware implementation of DSP, glue logic, bus bridging, and custom peripherals that would otherwise require discrete logic or an ASIC.
Key features of the EP2C35F672C7 include four phase-locked loops (PLLs) for clock synthesis and de-skew, 35 embedded 18×18 multipliers enabling up to 250 MHz DSP performance, support for external memory interfaces including DDR, DDR2, and QDRII SRAM, and Nios II embedded processor soft-core compatibility. The device is supported by the Quartus II design software and offers in-system programmability via serial or parallel configuration interfaces. The 672-BGA package exposes the device's full I/O count, enabling parallel data buses and high-speed external memory connections.
The Cyclone II architecture combines look-up-table (LUT)-based logic elements with M4K embedded memory blocks (4 Kbit each, configurable as RAM, ROM, or FIFO). The embedded multipliers are true 18×18 hardware multipliers that accelerate DSP operations such as FIR filters and FFT butterflies without consuming general logic. The PLLs support clock multiplication, division, phase shifting, and external clock feedback, which is essential for source-synchronous memory interfaces and multi-clock-domain designs.
Typical applications include industrial motor control, video surveillance and image processing, automotive infotainment pre-production, telecom line cards, low-cost software-defined radio front-end preprocessing, and education/development platforms. The combination of moderate logic density, embedded multipliers, and high I/O count makes the EP2C35 particularly attractive for designs transitioning from discrete DSP+microcontroller solutions to a single programmable device.
When designing with this device, allocate pin assignments early to match the BGA escape routing on the PCB, and use the Quartus II Pin Planner to verify I/O standards (LVTTL, LVCMOS, SSTL, LVDS) are supported on the chosen banks. The 672-BGA package requires via-in-pad or dog-bone fanout and controlled-impedance traces for high-speed signals. For new designs, evaluate the Cyclone IV E or Cyclone V families for active roadmap continuity, as Cyclone II is a legacy product family.
This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design considerations for the EP2C35F672C7 in a single reference, complementing the official Intel Cyclone II datasheet with cross-vendor substitution data, application context, and PCB layout guidance that engineer-focused product pages typically omit.
詢價
聯絡我們