EP2S60F1020I4N
EP2S60F1020I4N - Stratix II FPGA, 60K LE, 1020-BGA | Intel
The Intel EP2S60F1020I4N is a Stratix II family Field Programmable Gate Array (FPGA) integrating approximately 60,440 equivalent logic elements (LEs), 2,544,192 bits of embedded memory, and 718 maximum user I/O pins in a 1020-ball flip-chip BGA package. It is built on a 1.2 V core, 90 nm CMOS process with a 1.5 V PCI Express hard IP block, delivering up to 717 MHz fabric performance and embedded DSP blocks for high-throughput signal processing.
An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), embedded memory blocks, DSP blocks, and programmable interconnect, all controlled by a configuration bitstream loaded from external flash at power-up. FPGAs sit within the broader taxonomy of programmable logic devices (PLDs) -> complex programmable logic devices (CPLDs) -> FPGAs -> system-on-chip (SoC) FPGAs, and are widely used as hardware accelerators in the hierarchy of microprocessors -> DSPs -> FPGAs -> custom ASICs. Stratix II specifically targets high-performance ASIC prototyping, telecom baseband processing, and high-speed serial I/O subsystems where deterministic latency and parallel arithmetic throughput are required.
Key features include up to 36 embedded 18x18 multipliers organized into DSP blocks, twelve PLLs for clock management, support for external memory interfaces including DDR, DDR2, QDRII, and RLDRAM, and 12 high-speed transceiver channels supporting up to 6.375 Gbps for protocols such as PCI Express, Serial RapidIO, and Gigabit Ethernet. Each Stratix II LAB contains 10 Adaptive Logic Modules (ALMs), each ALM containing two Adaptive Look-Up Tables (ALUTs), enabling efficient mapping of arithmetic, register, and combinational logic.
The architecture is fabricated on a 90 nm strained-silicon CMOS process with copper interconnect and low-k dielectric. It supports a maximum user I/O count of 718 across 32 I/O banks, with per-bank voltage-referenced standards ranging from 1.2 V to 3.3 V including LVDS, LVPECL, HSTL, and SSTL. Configuration is via passive serial (PS), passive parallel synchronous (PPS), passive parallel asynchronous (PPA), fast passive parallel (FPP), or JTAG, with bitstream encryption and decompression supported through the AES-128 engine.
Typical applications include ASIC prototyping and emulation, telecom line-card payload processing, high-speed serial protocol bridging (PCIe Gen1/Gen2, Serial RapidIO, CEI-6G), video and image processing pipelines, and military/aerospace signal-processing platforms. The Stratix II family is widely used in defense, medical imaging, and broadcast video systems where deterministic throughput is critical.
When designing with this device, careful attention must be paid to power-rail sequencing (VCCINT, VCCIO, VCCA, VCCD_PLL), thermal management via the exposed die and 1.0 mm BGA pitch, and signal-integrity routing for the transceiver channels. Reference designs and IBIS models from Altera's design resource center are recommended for first-time bring-up. This page synthesizes distributor pricing, drop-in alternative SKUs within the Stratix II family, and practical design considerations not found on a stockist product page.
詢價
聯絡我們