產品(42,000+)

MPC859TZP133A - PowerQUICC 133MHz MPU 32-Bit | NXP | 357-BGA
MPC859TZP133A

MPC859TZP133A - PowerQUICC 133MHz MPU 32-Bit | NXP | 357-BGA

The NXP Semiconductors MPC859TZP133A is a PowerQUICC integrated communications controller (PowerQUICC I family) built on a 32-bit Power Architecture core operating at 133MHz, housed in a 357-ball PBGA (BGA-357) package measuring 25x25mm with 1.8V core / 3.3V I/O supply rails. An MPU/MPMC (Microprocessor Unit) is the central processing element of an embedded computing system, executing instructions, managing memory, and orchestrating peripherals. The PowerQUICC family sits in the hierarchical taxonomy of: MPU -> embedded processor -> microprocessor -> integrated circuit. The MPC859T specifically integrates a PowerPC core with on-chip communications peripherals (SCCs, SMCs, FCCs), eliminating the need for external communication chipsets. Key features include 133MHz core clock speed, 32-bit RISC architecture, integrated communications controller block with multiple serial channels, 0.18um CMOS process technology, and an operating temperature range of 0C to +95C. The 357-ball PBGA package provides high-density interconnect for the extensive peripheral set while maintaining manageable PCB routing. The device operates on 3.3V I/O with an internal 1.8V core. Architecturally, the MPC859TZP133A combines a PowerPC 603e-class core with the CPM (Communications Processor Module), enabling offloading of serial protocol handling from the main CPU. This heterogeneous structure is particularly efficient for telecom and networking workloads where serial I/O dominates. The integrated memory controller supports DRAM, SRAM, and flash, while the system interface includes PCI. Typical applications include WAN routers, DSLAM line cards, telecom switching equipment, industrial control with networking, and legacy serial-protocol aggregation platforms. The wide peripheral integration makes it suitable for compact designs where multiple communication channels are required. When designing with the MPC859TZP133A, ensure proper power-supply sequencing (3.3V before 1.8V, or simultaneously) and adequate decoupling on both rails. The BGA package requires X-ray inspection or careful reflow profiling; pad design must follow NXP's design guide to avoid solder voids under the 1.0mm pitch balls. This page synthesizes distributor pricing (as of 2026-10-16), lifecycle insight, drop-in alternatives within the MPC8xx family, and practical design notes not typically aggregated on a single manufacturer product page.

詢價 聯絡我們
MPC860DECZQ50D4 - 50MHz PowerQUICC MPU, 357-BGA | NXP
MPC860DECZQ50D4

MPC860DECZQ50D4 - 50MHz PowerQUICC MPU, 357-BGA | NXP

The NXP MPC860DECZQ50D4 is a 50 MHz PowerQUICC microprocessor IC from the MPC8xx family, integrating a 32-bit Power Architecture core with an on-chip Communications Processor Module (CPM) in a 357-ball PBGA package (25x25 mm). It is designed for embedded communications and networking controller applications such as routers, switches, DSLAMs, and telecom line cards, where deterministic protocol processing is required alongside general-purpose CPU control. An MPU (Microprocessor Unit) integrates a CPU core with peripheral and memory subsystems on a single die, while a PowerQUICC device extends this concept with a dedicated RISC-based communications processor that offloads DMA, HDLC, Ethernet, ATM, and serial protocol handling from the main CPU core. Within the broader taxonomy, PowerQUICC sits under Power Architecture SoC -> microprocessor -> embedded processor -> semiconductor, and combines deterministic I/O with a familiar programming model that simplifies firmware portability from earlier MPC8xx designs. The MPC860DECZQ50D4 features include a single 32-bit core running at 50 MHz, dual 10 Mbps Ethernet MACs with MII interfaces, four serial communications controllers (SCCs), two serial management controllers (SMCs), a 4-channel DMA controller, and a memory controller supporting DRAM, SRAM, EPROM, Flash, and user-programmable machines. The 'C' suffix denotes a 4 Kbyte instruction cache, 4 Kbyte data cache, and integrated memory management unit (MMU) with translation tables, enabling protected-memory operating systems such as VxWorks and embedded Linux. Power consumption is reduced relative to legacy MPC860 designs through clock gating and selective peripheral power-down. The part targets telecom infrastructure, industrial control, and embedded networking designs where deterministic communications throughput is required. Operating temperature range is -40 C to +95 C, suitable for industrial-grade enclosures but not full automotive. The 'D4' suffix indicates a tray packaging variant of the 357-PBGA, which is a lead-free but non-RoHS lead-bearing BGA per long-standing PowerQUICC data sheets. Designers should consider the device's EOL lifecycle status, the need for legacy compiler toolchains, and the continued availability of NXP/Freescale reference BSPs. The MPC860DECZQ50D4 is appropriate for sustainment of existing designs and for new designs where long-term support outweighs raw clock speed requirements. Compared to a 50 MHz PowerQUICC, modern Cortex-R or Cortex-A SoCs deliver 10x to 100x the DMIPS per watt but require revalidation of firmware, drivers, and timing budgets.

詢價 聯絡我們
MPC860DEVR80D4 - PowerQUICC MPU 80MHz 357-PBGA | NXP
MPC860DEVR80D4

MPC860DEVR80D4 - PowerQUICC MPU 80MHz 357-PBGA | NXP

The NXP Semiconductors MPC860DEVR80D4 is a PowerQUICC MPC8xx microprocessor that integrates a 32-bit PowerPC core running at 80 MHz with on-chip communications peripherals, housed in a 357-ball PBGA package (25 x 25 mm). Marked End of Life on the NXP product page, it was designed for embedded communications and networking controller applications where integration, deterministic performance, and proven toolchains mattered more than raw clock speed. The device combines a 32-bit RISC core, memory management, and a rich peripheral set in a single IC, allowing designers to replace a discrete CPU plus glue logic with one BGA package. As a PowerQUICC microprocessor, the MPC860DEVR80D4 belongs to the broader family of PowerPC-based embedded MPUs, sitting between classic microcontrollers and high-end application processors in capability and complexity. The PowerQUICC architecture was NXP's (and originally Motorola's) flagship communications-processor family, integrating a PowerPC core with dedicated communications engine peripherals for WAN, LAN, and serial routing. The 'DE' suffix denotes Ethernet and SCC-rich peripheral configuration, while 'VR80' indicates 80 MHz core speed in a lead-free PBGA. Key specifications include 80 MHz maximum core frequency, 32-bit internal data path, single-core architecture, and a 357-pin PBGA (25x25 mm) surface-mount package. Power consumption, exact memory map, and peripheral count should be confirmed against the manufacturer datasheet because this variant is end-of-life and datasheet revision documents are the only authoritative source. Typical applications include telecom line cards, ISDN adapters, industrial routers, VoIP gateway controllers, and legacy networking equipment where a deterministic PowerPC core with integrated CPM (Communications Processor Module) replaced an external ASIC. The 357-PBGA package requires multi-layer PCB design with controlled-impedance traces and a substantial thermal copper pour. When designing with this EOL part, verify long-term availability through authorized distributors and review NXP's Product Change Notice documentation. The 357-ball PBGA demands reflow profile control within JEDEC J-STD-020 parameters and X-ray inspection post-assembly because the large array is not visually inspectable. Always check NXP's official PCN database before committing to a new design.

詢價 聯絡我們
MPC860DEZQ50D4 - PowerQUICC MPU 50MHz 357-BGA | NXP
MPC860DEZQ50D4

MPC860DEZQ50D4 - PowerQUICC MPU 50MHz 357-BGA | NXP

The NXP MPC860DEZQ50D4 is a PowerQUICC MPC8xx family 32-bit integrated communications microprocessor running at 50 MHz core clock, housed in a 357-ball PBGA package. It combines a Power Architecture embedded core with the CPM (Communications Processor Module) that supplies dedicated hardware for HDLC, Ethernet (10/100 Ethernet MAC), PCMCIA, and serial channel controllers. The device integrates a system-level peripheral set including timers, an interrupt controller, memory controllers, and a 32-bit data bus, enabling single-chip designs for networked and telecom equipment. A PowerQUICC device is a member of the communications-processor family that merges a general-purpose RISC microprocessor core with a dedicated communications engine on the same die. In the broader taxonomy it sits at: PowerQUICC -> communications microprocessor -> microprocessor unit (MPU) -> integrated circuit -> semiconductor. This category was developed specifically for embedded networking and telecom control-plane designs where deterministic I/O handling, multi-protocol serial framing, and low BOM cost outweigh raw computational throughput. Key features include a 50 MHz core, integrated 10/100 Ethernet MAC, HDLC/SDLC channel support, PCMCIA interface, a flexible memory controller for DRAM/SRAM/Flash, an interrupt controller with multiple priority levels, and a peripheral set that covers serial, parallel, and timer functions. The device integrates virtually every block required to build an xDSL/Cable modem, router, bridge, or industrial serial controller, eliminating external protocol-bridge chips. Architecturally, the MPC860 uses a 0.32 µm CMOS process with separate instruction and data paths for the embedded Power core, while the CPM offloads DMA-driven serial framing, freeing the core for routing and control-plane code. The chip is delivered in a 357-ball Plastic BGA (PBGA) with 25x25 mm body, providing adequate escape routing for the wide external bus while staying within a manageable PCB footprint. Typical applications include xDSL/cable modem control plane, ISDN router termination, T1/E1 channel banks, industrial serial concentrators, and embedded networking appliances where the integrated Ethernet MAC and HDLC channels remove the need for an external bridge IC. Designers should note the 3.3 V I/O supply requirement, the need to honor all 357 BGA balls including unused supply pins, and the importance of following the reference manual's reset and configuration sequence for proper CPM bring-up. This page consolidates distributor pricing, verified drop-in alternatives, and practical design notes that go beyond the bare manufacturer datasheet to help engineers and procurement teams evaluate this legacy PowerQUICC part.

詢價 聯絡我們
MPC860DPVR80D4 - PowerQUICC 80MHz 32-Bit MPU | NXP | 357-PBGA
MPC860DPVR80D4

MPC860DPVR80D4 - PowerQUICC 80MHz 32-Bit MPU | NXP | 357-PBGA

The NXP MPC860DPVR80D4 is a PowerQUICC integrated communications microprocessor (MPC860 family) featuring a 32-bit PowerPC core running at 80 MHz, manufactured on a 0.32 micron process and housed in a 357-ball PBGA package measuring 25 x 25 mm. This dual-purpose part combines a high-performance embedded CPU with a flexible communications processor module (CPM), enabling simultaneous handling of a CPU-driven control plane and a separate CPM-driven data path for networking protocols. An embedded MPU (microprocessor unit) is a CPU integrated with memory and peripherals on a single die, used in industrial controllers, networking equipment, and communications infrastructure where deterministic processing of real-time protocol traffic is required. The MPC860DPVR80D4 sits in the broader taxonomy of PowerPC-based embedded processors -> RISC microprocessors -> integrated communications processors -> networking SoCs, and is one of the foundational devices behind early-2000s telecom and datacom equipment. Key features include the integrated CPM supporting serial interfaces, a memory controller, system integration functions, and on-chip peripherals. The 'DP' suffix denotes the specific configuration within the MPC860 family (revisions and feature mixes differ across DT/DT/DTV/PC/DP variants). The 80 MHz clock speed, 32-bit data path, and 357-ball PBGA footprint make this device oriented toward mid-complexity routers, bridges, and access multiplexers. Technically, the MPC860DPVR80D4 is implemented in a 0.32-micron CMOS process, balancing integration density with low power for a PowerPC-class core. The CPM offloads protocol processing (HDLC, UART, Ethernet) from the core, allowing deterministic throughput on serial lines while the core handles control-plane tasks. Typical applications include telecom access equipment such as DSLAMs, routers, bridges, and ISDN terminal adapters, plus industrial control and embedded networking modules. When designing with this part, note its leaded (Pb-containing) finish per the original MPC860 family datasheet - the 'D4' suffix denotes a leaded ball finish which is not RoHS compliant. New designs should target lead-free equivalents. This page synthesizes distributor pricing, lead-time, and 357-PBGA drop-in alternatives not aggregated in a single place by any single distributor listing, helping engineers evaluate last-time-buy and obsolescence-mitigation options.

詢價 聯絡我們
MPC860DPZQ50D4557 - PowerQUICC 50MHz 32-Bit MPU | NXP | 357-PBGA
MPC860DPZQ50D4557

MPC860DPZQ50D4557 - PowerQUICC 50MHz 32-Bit MPU | NXP | 357-PBGA

The NXP MPC860DPZQ50D4557 is a PowerQUICC communications microprocessor built on 32-bit Power Architecture, integrating a 50 MHz core, a dedicated Communications Processor Module (CPM), Ethernet/ATM/HDLC/PCMCIA interfaces, and a 357-ball Plastic BGA (PBGA, 25x25 mm) package. It belongs to the MPC8xx family of embedded microprocessors designed for high-integration communications and networking tasks. A PowerQUICC microprocessor (sometimes referred to as a communications SoC or embedded MPU) is a 32-bit processor that combines a Power Architecture core with on-chip peripheral controllers, reducing system BOM count and power consumption in routers, bridges, and remote-access equipment. Within the broader taxonomy it sits at: microprocessor (MPU) > embedded processor > communications SoC > Power Architecture SoC > semiconductor. MPC8xx parts dominated late-1990s/early-2000s telecom designs and remain in long-lifecycle equipment today. Key features include a single 50 MHz Power Architecture core, an independent CPM supporting Ethernet (10/100), ATM, HDLC/SDLC, and PCMCIA, 4 KB unified instruction/data cache, MMU with 32-entry TLB, and a general-purpose 32-bit data bus. Operating temperature is 0C to +95C (commercial grade). The device supports JTAG boundary-scan and on-chip debug. Memory controller interfaces SDRAM, DRAM, SRAM, EPROM, and Flash, while PCMCIA and CPM peripherals handle external I/O expansion. The CPM offloads low-level protocol processing from the core, freeing the CPU for higher-layer software stacks. Combined with hardware TCP/IP acceleration and multi-channel DMA, this architecture delivers deterministic throughput for WAN/LAN edge devices. The 357-PBGA package provides high pin density and excellent thermal performance for sustained industrial workloads. Typical applications include SOHO routers, DSL/cable modems, ATM switches, industrial Ethernet bridges, and legacy telecom access equipment. It is widely used in long-lifecycle embedded designs where firmware stability and proven Power Architecture toolchains are required over raw clock speed. When designing, verify supply voltage (3.3V core, separate I/O rail), clocking, and JTAG pinout against the NXP hardware specification. Note that lead-time pricing reflects NXP's last-time-buy status; stock from authorized distributors and brokers should be confirmed before BOM commitment.

詢價 聯絡我們
MPC860DPZQ66D4 - 66MHz PowerQUICC MPU 357-PBGA | NXP
MPC860DPZQ66D4

MPC860DPZQ66D4 - 66MHz PowerQUICC MPU 357-PBGA | NXP

The NXP MPC860DPZQ66D4 is a 32-bit PowerQUICC microprocessor from the MPC8xx family, integrating a PowerPC core with the Communications Processor Module (CPM) at 66 MHz clock speed in a 357-ball PBGA (25x25 mm) package. The device is specified for 3.3V core operation and combines general-purpose embedded processing with dedicated communications peripherals on a single die. (Answer Capsule) An MPU (Microprocessor Unit) is an integrated circuit that contains the central processing unit of an embedded system. The PowerQUICC architecture integrates a PowerPC integer core with a separate RISC-based Communications Processor Module (CPM) that offloads networking and serial tasks. Within the broader IC hierarchy, the MPC860 belongs to: microprocessor -> MPU -> embedded processor -> PowerPC architecture -> 32-bit RISC -> integrated communications controller. This integration reduces system cost and BOM count in networking and telecom designs compared with a discrete CPU plus external MAC/PHY bridge. Key features of the MPC860DPZQ66D4 include 4 Kbytes of instruction cache and 4 Kbytes of data cache with write-through capability, a multiply/accumulate (MAC) unit, a DRAM controller supporting up to 256 Mbytes of address space, and an integrated CPM supporting Ethernet (10 Mbps), HDLC/SDLC, UART, SCC, and SPI peripherals. The 3.3V I/O and core supply, combined with a 66 MHz bus, deliver sufficient throughput for SOHO routers, ISDN terminal adapters, and industrial serial concentrators of the late-1990s/early-2000s generation. The MPC860 architecture uses a Harvard-style split cache and a dedicated CPM to handle time-critical serial protocols. The CPM offloads DMA-driven serial transfers from the PowerPC core, allowing the CPU to focus on routing, control-plane, and management software. Memory is glue-less DRAM-up to 16/32-bit EDO or page-mode-with on-chip bank-select logic, reducing external chip count. A 32-bit address bus provides 4 Gbyte logical space, of which up to 256 Mbytes is practical DRAM. Typical applications include SOHO routers, ISDN terminal adapters, xDSL modems, industrial serial protocol converters, and embedded telecom controllers. According to the Freescale/NXP PowerQUICC hardware specifications document, the part targets designs where deterministic serial communication must coexist with general-purpose control software on a single chip. When designing with this device, ensure the 3.3V supply rail is clean and decoupled per the hardware specifications. Note that this MPN is flagged 'Not For New Designs' by NXP; new designs should consider PowerQUICC II (MPC82xx) or QorIQ (P-series) families instead, while existing designs can continue to use the MPC860DPZQ66D4 as a long-term supply part. This page synthesizes distributor pricing, drop-in alternatives from the MPC860 family, and practical design notes that are not aggregated in a single place by the manufacturer datasheet alone.

詢價 聯絡我們
MPC860DPZQ80D4 - PowerQUICC MPC860 80MHz 32-Bit MPU | NXP
MPC860DPZQ80D4

MPC860DPZQ80D4 - PowerQUICC MPC860 80MHz 32-Bit MPU | NXP

The NXP (formerly Motorola/Freescale) MPC860DPZQ80D4 is a PowerQUICC MPC8xx family 32-bit integrated communications microprocessor (MPU) clocked at 80 MHz, housed in a 357-ball PBGA (25x25 mm) package and supplied from a 3.3 V rail. It integrates a PowerPC core, an embedded 32-bit RISC communications processor module (CPM), and a rich set of networking peripherals on a single die, which is why it earned the "PowerQUICC" brand for telecom/datacom equipment. A PowerQUICC device is a category of system-on-chip that combines a general-purpose processor with hardware communications engines (serial, Ethernet, HDLC, ATM) so that wire-speed protocol handling does not stall application code. Within the broader taxonomy, the MPC860DPZQ80D4 sits inside microprocessor (MPU) -> embedded processor -> communications SoC -> integrated circuit. Its core architecture traces back to the PowerPC 603 line, but the silicon is purpose-built for routers, bridges, and remote-access equipment rather than desktop computing. Key features include a single 80 MHz PowerPC core, dedicated CPM supporting up to four SCCs and two SMCs, 10/100 Mbps Fast Ethernet MAC, HDLC/SDLC/UART/SPI/I2C controllers, integrated memory controller (up to 4 banks of DRAM), 4-channel DMA, timers, and a system integration unit (SIU). The device integrates communications peripherals directly on-die, eliminating an external MAC or protocol-controller ASIC and reducing BOM cost on legacy networking hardware. The MPC860DPZQ80D4 uses a 0.32 um CMOS process with 3.3 V I/O and a 2.2 V core voltage, providing lower power consumption than earlier 5 V PowerQUICC variants. The 357-pin PBGA package supports high-density board layouts while exposing the full peripheral set, and the part is footprint-compatible with other MPC860/MPC855T family members in the same BGA, simplifying board migration. Typical applications include 10/100 Ethernet routers and switches, ISDN terminal adapters, DSLAM line cards, industrial serial bridges, SCADA/remote telemetry gateways, and legacy telecom controller cards. The integrated Fast Ethernet MAC and multi-protocol SCC/SMC channels let a single MPC860 terminate multiple WAN or LAN links without glue logic. Design consideration: confirm thermal budget against the 357-BGA theta_JA on your specific PCB stack-up, validate DRAM timing against the SIU memory-controller parameters, and verify that unused balls on the BGA are properly tied per the NXP hardware specifications document. Power sequencing (3.3 V before 2.2 V) must be respected to prevent latch-up. This page synthesizes verified distributor stock, drop-in PowerQUICC alternatives from web data, and engineering design notes that go beyond the official hardware specifications document, so procurement and design teams can make a side-by-side replacement decision in one place.

詢價 聯絡我們
MPC860DTVR50D4 - 50MHz PowerQUICC MPU, 357-PBGA | NXP
MPC860DTVR50D4

MPC860DTVR50D4 - 50MHz PowerQUICC MPU, 357-PBGA | NXP

The NXP MPC860DTVR50D4 is a 32-bit PowerQUICC communications microprocessor from the MPC8xx family, featuring a single PowerPC core running at 50 MHz, integrated in a 357-ball PBGA package (25 x 25 mm). It is targeted at embedded communications and networking controller applications where deterministic performance, on-chip peripheral integration, and low system cost matter more than raw CPU throughput. The device combines a PowerPC integer core with the CPM (Communications Processor Module), which offloads serial communications tasks such as HDLC, Ethernet, UART, and SCC/SMC channels from the main CPU. A microprocessor (MPU) is an integrated circuit that contains the central processing unit, instruction decoding, register files, and cache/memory management logic for a complete computing engine, typically integrated with peripherals onto a single die. Within the broader taxonomy, the MPC860 belongs to the communications-processor class: microprocessors -> embedded microprocessors -> Power Architecture processors -> communications microprocessors (PowerQUICC). PowerQUICC devices historically bridged the gap between simple MCUs and full application processors by combining a general-purpose CPU with a dedicated RISC-based communications engine. Key features of the MPC860DTVR50D4 include a 32-bit PowerPC core at 50 MHz, integrated CPM with multi-channel serial support, 4 DMA channels, system integration unit, memory controller for DRAM/SRAM/ROM, 3.3V I/O supply, and a 357-pin PBGA package. The PowerQUICC architecture supports up to 10/100 Ethernet MACs, Fast HDLC, ATM, and transparent transmission. The integrated peripheral set replaces many external logic chips, reducing BOM cost and PCB complexity in routers, bridges, and telecom line cards. Architecturally, the MPC860 uses a 0.32 um CMOS process with separate instruction and data buses to the on-chip caches, while the CPM runs its own RISC microengine for protocol handling. This dual-engine approach allows line-rate packet processing without overloading the main CPU. The device supports both single- and dual-bus configurations, with a 32-bit external system bus interface for SDRAM, Flash, and peripheral I/O. Typical applications include industrial networking routers, telecom line cards, ISDN terminal adapters, industrial serial bridging, and legacy communication gateways. Design considerations include careful power-supply decoupling, thermal management for the PBGA package, and adherence to NXP layout guidelines for high-speed bus termination. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that complement the manufacturer datasheet.

詢價 聯絡我們
MPC860DTVR66D4 - PowerQUICC MPU 66MHz 357-PBGA | NXP
MPC860DTVR66D4

MPC860DTVR66D4 - PowerQUICC MPU 66MHz 357-PBGA | NXP

The NXP MPC860DTVR66D4 is a PowerQUICC 32-bit Power Architecture microprocessor running at 66 MHz, integrating a PowerPC core with the Communications Processor Module (CPM) and a 357-pin Plastic BGA (PBGA) 25x25 mm package. The device combines a 32-bit RISC CPU core, the CPM for HDLC/ATM/10 Mbps Ethernet, PCMCIA interface logic, DRAM controller, and on-chip peripherals in a single system-on-chip. A PowerQUICC microprocessor belongs to the MPU (microprocessor unit) class of integrated circuits, historically positioned as a communications-centric system-on-chip that merges a PowerPC processor core with dedicated serial-protocol engines. In the system hierarchy, it sits above general-purpose microcontrollers, offering higher deterministic I/O bandwidth for telecom and networking equipment where offloading protocol framing from the CPU is essential. Key features include the integrated CPM with RISC communication engines, dual 10 Mbps Ethernet MACs, ATM and HDLC support, PCMCIA controller, DRAM controller with bus sizing logic, and the standard PowerPC memory management unit. The 66 MHz core clock drives both the CPU and the CPM, while the external bus supports 32-bit data paths at up to 66 MHz. The 3.3 V supply rail and 0 to 95 C operating temperature make it suitable for industrial embedded systems. Typical applications include telecom switching fabric, ISDN terminal adapters, ATM/Frame Relay access devices, industrial routers, and legacy networking equipment. The combination of CPU + CPM is especially valuable where deterministic serial-channel handling must coexist with higher-layer protocol stacks without external ASICs. When designing with this device, note that the 357-PBGA package requires multi-layer PCB design with controlled-impedance routing for the external bus; verified JTAG and BDM debug tools must be used for development. The part is Not For New Designs per distributor listings, so consider migration to MPC860SAR or newer PowerQUICC II/III variants for new projects. This page synthesizes distributor pricing, drop-in alternatives within the MPC860 family, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
MPC860ENCVR50D4 - 50MHz PowerQUICC MPU, 357-BGA | NXP
MPC860ENCVR50D4

MPC860ENCVR50D4 - 50MHz PowerQUICC MPU, 357-BGA | NXP

The NXP MPC860ENCVR50D4 is a 32-bit PowerQUICC microprocessor from the MPC8xx family, integrating a 50 MHz PowerPC core with on-chip communications peripherals and a 357-pin plastic BGA package (25x25 mm). It combines a 32-bit RISC architecture with 0.32 micrometer CMOS process technology, operating from a 3.3V supply rail and supporting the PowerQUICC peripheral set originally tuned for telecom and embedded networking controllers. A PowerQUICC microprocessor is a member of the integrated communications processor family — it is, in system hierarchy, a microprocessor (MPU) that integrates CPU core, system controller, and dedicated communications peripherals (FCC, SCC, SMC, SPI, I2C) on a single die. PowerQUICC MPUs are widely used in networking equipment where deterministic serial-channel handling must coexist with general-purpose control processing; the MPC860 sub-family sits within NXP/Freescale's MPC8xx line, beneath the higher-end MPC8260/MPC8280 and above the simpler MPC850. Key features of the MPC860ENCVR50D4 include a 50 MHz core clock, integrated CPM (Communications Processor Module) supporting multiple HDLC/SCC channels, 357-ball PBGA packaging for high-density board designs, and full PowerPC instruction-set compatibility. The device includes 4 KB instruction cache and 4 KB data cache, dual UART-style serial channels, and parallel I/O ports. The 357-pin BGA provides the high pin count required to expose all of the integrated communications peripherals while keeping board area manageable. The architecture pairs a PowerPC core with the CPM co-processor that offloads serial DMA, HDLC framing, and time-slot management, freeing the core for protocol and routing tasks. This dual-processor internal structure is what differentiates PowerQUICC from general-purpose MPUs and is why legacy telecom, industrial control, and routing platforms standardized on this family. The EN suffix in the part number typically denotes the Ethernet-enabled variant within the MPC860 sub-family, complementing the integrated serial channels with 10 Mbps Ethernet MAC support. Typical applications include WAN/LAN routers, ISDN terminal adapters, ATM edge devices, industrial serial-bridges, and legacy telecommunications line cards. Engineers continue to deploy this part in long-lifecycle industrial platforms where the PowerQUICC ecosystem (toolchain, RTOS support, reference designs) is mature and revalidation cost is high. When designing with this MPU, designers should plan for a multi-rail supply (3.3V core plus I/O), adequate BGA decoupling, and signal-integrity work on the parallel bus. The 357-pin BGA requires X-ray inspection and careful reflow profiling, and most engineers keep the manufacturer's reference schematics as a starting point rather than designing the bus interface from scratch. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in a single datasheet - so procurement and engineering teams can decide between the MPC860ENCVR50D4 and its same-package MPC860 family members in one place.

詢價 聯絡我們
MPC860ENVR50D4-FR - 50MHz PowerQUICC MPU 357-BGA | NXP Semiconductors
MPC860ENVR50D4-FR

MPC860ENVR50D4-FR - 50MHz PowerQUICC MPU 357-BGA | NXP Semiconductors

The NXP Semiconductors MPC860ENVR50D4-FR is a 32-bit PowerQUICC microprocessor from the MPC8xx family, integrating a core processor and peripheral logic for embedded communications applications. It operates at 50 MHz core frequency, runs from a 3.3 V supply, and is packaged in a 357-ball PBGA (25 x 25 mm) with lead-free / RoHS-compliant solder balls. The "EN" in the part number denotes the Ethernet-enabled variant, the "VR" suffix indicates the voltage/revision grade, "50" is the 50 MHz clock, "D4" is the revision, and the "-FR" suffix indicates the supplied packaging option. A PowerQUICC (Power QUICC, or "Quad Integrated Communications Controller") is an integrated communications processor that combines a PowerPC core with dedicated peripheral engines for networking and telecom. Within the broader taxonomy, the MPC860 sits in the hierarchy: PowerQUICC -> MPC8xx family -> communications MPU -> embedded microprocessor -> integrated circuit. The part also goes by the synonym MPC860 PowerQUICC and historically by its Motorola Semiconductor part number (the family originated at Motorola before NXP's acquisition of Freescale). Understanding this taxonomy matters when comparing older datasheet revisions to current NXP-published versions. Key features include the PowerPC 603e-derived core with separate 4 KB instruction and 4 KB data caches, an integrated communications processor module (CPM) supporting up to three fast serial communications controllers (FCCs), two MCCs, four SCCs, an SPI, an I2C, and a parallel interface. On-chip peripherals also include a 10/100 Mbps Ethernet MAC, HDLC/SDLC controllers, USB 1.1 (device), 4 DMA channels, and a memory controller with SDRAM, DRAM, and burst flash support. Per the NXP MPC860 hardware specifications document, the part integrates nearly all logic needed for a single-board router, bridge, or HFC modem node. Typical applications include SOHO routers, 10/100 Mbps Ethernet switches with management, ISDN terminal adapters, xDSL modems, set-top box controllers, and industrial serial-to-Ethernet bridges. The integrated CPM offloads serial framing from the core, freeing CPU cycles for routing, filtering, or upper-layer protocol processing. When designing with this device, plan for thermal management of the 357-ball PBGA, provide a clean 3.3 V rail with adequate bulk decoupling, and allocate PCB real estate for the external SDRAM bus. The device is mature and widely documented in legacy NXP/Motorola application notes, making firmware porting straightforward for new designs.

詢價 聯絡我們
MPC860ENVR66D4 - 66MHz PowerQUICC MPU, 357-BBGA | NXP
MPC860ENVR66D4

MPC860ENVR66D4 - 66MHz PowerQUICC MPU, 357-BBGA | NXP

The NXP (formerly Freescale) MPC860ENVR66D4 is a 32-bit PowerQUICC microprocessor from the MPC8xx family running at 66 MHz core clock, housed in a 357-ball PBGA (Plastic Ball Grid Array) package measuring 25x25 mm and supplied from a 3.3 V rail. It integrates a PowerPC core with the communications processor module (CPM) originally designed for networking, telecom, and embedded control applications. The part is now in NXP's End-of-Life status and is primarily maintained for legacy repairs and long-life industrial programs. What is an MPU? A microprocessor unit (MPU) is the central processing IC of an embedded system - a CPU core + bus architecture + peripheral controllers integrated into a single silicon die. The MPC8xx family adds a hardware communications processor module (CPM) that offloads DMA-driven serial protocols (HDLC, Ethernet, UART, SCC/SMC channels) from the core, allowing deterministic I/O for telecom equipment. Within the taxonomy, the MPC860 sits at: PowerPC embedded MPU -> MPC8xx family -> PowerQUICC communications processors -> NXP legacy networking silicon. Key features include 4 KB instruction cache, 4 KB data cache, an integrated memory management unit (MMU), dual 10/100 Mbps Ethernet MACs inside the CPM, four SCC channels, two SMC channels, an SPI port, an I2C port, and a general-purpose timer cascade. The device supports up to eight memory chip selects, 32-bit DRAM with page-mode operation, and PCMCIA interface logic for two card slots - a feature set rarely matched by modern MPUs. The architecture combines a single-issue PowerPC integer core with the CPM on-chip peripheral engine. Code executes on the core while DMA-driven frame traffic is handled autonomously by the CPM, freeing the CPU for higher-layer protocol stacks. This dual-engine split is the historical strength of PowerQUICC: deterministic serial throughput without software intervention. Typical applications include legacy Ethernet routers and DSLAM line cards, industrial serial-protocol concentrators, telecom control plane processors, factory-floor PLCs and protocol bridges, and avionics data concentrators. The wide operating temperature range and long-life NXP support made it a common choice in long-deployment industrial and military programs. When designing around an EOL MPU, verify stock life expectancy at franchised distributors and lock the BOM with form-fit-function alternates. The MPC860ENVR66D4 footprint, bus timings, and register map are shared with the broader MPC860 family, easing substitution across speed grades. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MPC860ENVR80D4 - 80MHz PowerQUICC MPU, 357-PBGA | NXP
MPC860ENVR80D4

MPC860ENVR80D4 - 80MHz PowerQUICC MPU, 357-PBGA | NXP

The NXP (formerly Freescale) MPC860ENVR80D4 is a PowerQUICC MPC8xx 32-bit microprocessor running at 80 MHz, housed in a 357-ball Plastic BGA (PBGA, 25x25 mm) package. It integrates a PowerPC core with a separate Communications Processor Module (CPM) that offloads serial-channel and networking tasks, allowing the CPU to focus on protocol processing and system control. The device supports an Ethernet 10 Mbps MAC, UART, HDLC/SDLC channels, and a DRAM controller, making it a single-chip solution for legacy telecom, industrial control, and routing equipment. A microprocessor (MPU) is a CPU-centric integrated circuit that executes system-level instruction streams and is paired externally with memory and peripherals. The MPC8xx family belongs to the PowerQUICC line of integrated communications processors, which sits between general-purpose CPUs (e.g., PowerPC, ARM) and dedicated network processors. Variants in the family differ in clock speed, peripheral mix (number of SCCs/SMCs), and temperature grade; designers typically choose among them to balance throughput against power and cost. Key features include a 32-bit PowerPC core, integrated 10 Mbps Ethernet MAC, four SCC (Serial Communication Controller) channels, two SMC (Serial Management Controller) channels, a DRAM controller with FPM/EDO/page-mode support, four 16-bit timers, and a JTAG/debug port. The device operates from a 3.3 V supply and is offered in commercial-grade temperature ranges. The 357-PBGA 25x25 mm package provides dense interconnect for board designs where BGA assembly is already in use. The architecture combines an integer pipeline PowerPC core, separate instruction and data caches, a system interface unit for bus arbitration, and the dedicated CPM that handles DMA-driven serial communications independently of the CPU. The CPM's RISC engine runs dedicated microcode to perform HDLC framing, UART encoding, and Ethernet MAC operations, freeing the host CPU for higher-layer protocol and management tasks. Typical applications include SOHO/branch-office routers, ISDN/DSL modem gateways, legacy industrial control routers, protocol bridges (HDLC/PPP/X.25), telecom line cards, and embedded serial-management controllers. The 80 MHz CPU with the CPM's offload engines is well matched to WAN-edge and protocol-conversion designs. When designing with this device, allocate adequate PCB layers for the 357-ball BGA and provide matched-impedance routing for the Ethernet MII/RMII traces. Decoupling must follow Freescale/NXP recommendations: place 0.1 uF ceramic capacitors at multiple VDD/VCC pins with a bulk 10-47 uF tantalum or polymer capacitor near the package. This page synthesizes distributor stock, lifecycle data, drop-in alternatives, comparison parameters, and practical design notes that are not consolidated in any single manufacturer datasheet.

詢價 聯絡我們
MPC860ENZQ50D4R - 50MHz PowerQUICC I MPU, 357-PBGA | NXP
MPC860ENZQ50D4R

MPC860ENZQ50D4R - 50MHz PowerQUICC I MPU, 357-PBGA | NXP

The NXP MPC860ENZQ50D4R is a 32-bit PowerQUICC I microprocessor built on the MPC8xx core, running at 50 MHz and packaged in a 357-ball PBGA (25x25 mm) with a tape-and-reel suffix per the ZQ code. It integrates a PowerPC core with a CPM (Communications Processor Module), 4 KB instruction cache / 4 KB data cache, MMU, and a rich set of on-chip peripherals including SCCs, SMCs, an SPI, an I2C, a parallel interface (port), timers. The part belongs to the PowerQUICC family and is aimed at embedded communications and networking applications. A PowerQUICC microprocessor is a category of integrated communications processor that combines a general-purpose PowerPC CPU and a separate RISC-based communications engine (CPM) on a single die. Within the broader taxonomy it is a microprocessor -> embedded MPU -> communications processor -> networking SoC. PowerQUICC parts dominated telecom equipment in the 1990s and early 2000s as one-chip routers, bridges, and remote-access concentrators. They remain in service today in long-lifecycle industrial and telecom installations where redesign risk outweighs BOM savings. Key features of the MPC860ENZQ50D4R include the embedded 32-bit PowerPC core at 50 MHz, integrated CPM for HDLC/PPP/SCC/UART protocol offload, four 8-bit parallel ports, a 32-bit address/data bus interface to external memory, SDRAM controller, and a small but functional on-chip instruction/data cache. The device supports external bus arbitration for multi-master designs and exposes dedicated timers, a watchdog, and JTAG boundary-scan. Power supply is typically 3.3 V I/O with a core voltage generated internally from the same rail on this mask-set. Architecturally, the MPC860ENZQ50D4R uses a Harvard-style cache, a unified TLB/MMU, and an internal system bus that decouples the core from the CPM, allowing sustained serial DMA without CPU intervention. The 50 MHz rating refers to the CPU clock; the bus clock and CPM clock are derived and typically run at 25 MHz on this speed grade. Power dissipation scales linearly with the active serial channels and memory traffic, so idle/standby current is a more representative number for low-duty-cycle applications. Typical applications include low-end routers, CSU/DSUs, ISDN terminal adapters, industrial serial-to-Ethernet gateways, and remote telemetry units where the CPM offloads HDLC framing from the host CPU. The wide range of on-chip serial channels and the legacy Freescale/NXP toolchain ecosystem make it a frequent choice for sustaining or replicating designs built around the PowerQUICC architecture. When designing with this part, verify the exact voltage rail of your specific MPC860EN mask (the EN suffix on this part indicates the integrated Ethernet SCC variant), and provide proper bus-termination and decoupling per the PowerQUICC hardware specifications manual. Long-term availability must be checked - PowerQUICC I parts are reaching end-of-life per the NXP PCN, so designers should plan second-source or migration strategies up front. This page synthesizes current distributor pricing, drop-in MPC860 family alternatives, and practical design guidance not collected in any single datasheet, helping engineers quickly assess whether the MPC860ENZQ50D4R still fits their long-lifecycle design.

詢價 聯絡我們
MPC860ENZQ50D4R2518 - 50MHz PowerQUICC MPU, 357-PBGA | NXP
MPC860ENZQ50D4R2518

MPC860ENZQ50D4R2518 - 50MHz PowerQUICC MPU, 357-PBGA | NXP

The NXP (formerly Freescale / Motorola) MPC860ENZQ50D4R2518 is a 32-bit PowerQUICC microprocessor running at 50 MHz, integrating a PowerPC core with a CPM (Communications Processor Module), and housed in a 357-ball PBGA package at 25x25 mm. It is the 50 MHz, -40C to +85C industrial temperature grade variant of the MPC860 family with the Ethernet feature set enabled and a specific customer code suffix (R2518). Background: The PowerQUICC (MPC8xx) family is a line of integrated communications microprocessors that combine a PowerPC embedded core with one or more independent RISC communications engines (the CPM). They sit in the taxonomy of embedded microprocessors -> microcontrollers -> PowerPC architecture -> PowerQUICC, and they target telecom and networking equipment where on-chip protocol handling offloads the main CPU. Key features: 50 MHz core / CPM clock, 4 KDMA channels, four SCCs (Serial Communication Controllers), two SMCs (Serial Management Controllers), one SPI and one I2C port, integrated 10/100 Ethernet MAC (the EN suffix), and a 32-bit data bus to external memory. The PBGA-357 (25x25 mm, 1.27 mm pitch) package provides the dense I/O needed to expose the external memory bus and the communications peripherals simultaneously. Technical depth: The MPC860ENZQ50D4R2518 separates control-plane processing (PowerPC core) from data-plane communications (CPM) using dual Harvard-architecture engines sharing a common system bus. This makes the device efficient for routing, bridging, and protocol-conversion tasks where deterministic serial handling is required alongside general-purpose code. Typical applications include telecom line cards, industrial routers, ISDN terminal adapters, H.110 bus bridges, and SCADA protocol converters. Designers select the 50 MHz EN grade when Ethernet connectivity and industrial temperature are mandatory and the application can tolerate the thermal envelope of a 25x25 mm PBGA. Design consideration: Route the external memory bus with matched impedance and keep trace lengths matched within the MPC860 datasheet's set-up and hold budgets; decouple each power pin with a 100 nF ceramic placed within 3 mm of the ball, and provide a continuous ground pour under the package for thermal dissipation. This page consolidates distributor pricing, lifecycle status, drop-in package-compatible alternates, and practical design notes that complement the manufacturer datasheet.

詢價 聯絡我們
MPC860ENZQ66D4557 - PowerQUICC 32-bit MPU, 66 MHz, 357-BGA | NXP
MPC860ENZQ66D4557

MPC860ENZQ66D4557 - PowerQUICC 32-bit MPU, 66 MHz, 357-BGA | NXP

The NXP (originally Motorola, then Freescale) MPC860ENZQ66D4557 is a 32-bit PowerQUICC integrated communications controller microprocessor built around the PowerPC architecture, delivering a 66 MHz core clock in a 357-ball Plastic BGA package (25 mm x 25 mm). It integrates a 32-bit PowerPC core with a 4-Kbyte unified instruction/data cache, a separate 4-Kbyte data cache, an integer unit, and a system integration unit (SIU) that combines memory controller, PCMCIA interface, and several peripheral blocks on one die. The integrated communications processor module (CPM) with an RISC engine offloads serial protocol handling from the core. A microprocessor (MPU) is a processor-on-a-chip that integrates a CPU core, memory management, and on-chip peripherals; in the embedded-systems hierarchy the MPC860 sits at the MPU -> integrated communications controller -> PowerQUICC -> PowerPC -> 32-bit embedded processor node. The PowerQUICC family is the lineage that later evolved into the PowerQUICC II/III (MPC82xx/MPC83xx) and ultimately QorIQ communications processors, so the MPC860 remains a recognized reference design for legacy telecom and industrial control boards. Key features of the MPC860ENZQ66D4557 include four on-chip serial communication controllers (SCCs) supporting Ethernet, HDLC/SDLC, UART, and transparent modes; two serial management controllers (SMCs); one serial peripheral interface (SPI) and one I2C interface; a programmable interrupt controller; a 32-bit address bus supporting up to 4 Gbyte address space; and 3.3 V I/O with 5 V tolerant inputs (per the PBGA device). The 357-PBGA package provides a robust surface-mount thermal envelope for industrial temperature operation from -40 C to +95 C ambient. Typical applications include industrial routers, ISDN/T1/E1 line cards, ATM switches, Ethernet switches with serial WAN uplinks, point-of-sale terminals, and SCADA controllers. The on-chip CPM dramatically reduces host-CPU load for protocols such as PPP, HDLC, and IEEE 802.3, which is why legacy telecom and factory-floor equipment continue to specify this part. When designing with the MPC860, ensure signal integrity on the 66 MHz external bus; add series termination if the bus length exceeds 50 mm. Power sequencing between the 3.3 V core and 3.3 V I/O rails must follow the SIU section of the datasheet to avoid latch-up. Decoupling must follow the manufacturer's reference board layout to keep the CPM's PLL within specification. This page synthesizes distributor inventory, drop-in alternative candidates in the same 357-PBGA package, and practical design notes compiled from the legacy PowerQUICC user manual - information not presented as a single view on DigiKey or the NXP product page.

詢價 聯絡我們
MPC860PCVR50D4 - PowerQUICC 32-Bit MPU, 50MHz, 357-BGA | NXP
MPC860PCVR50D4

MPC860PCVR50D4 - PowerQUICC 32-Bit MPU, 50MHz, 357-BGA | NXP

The NXP (formerly Freescale) MPC860PCVR50D4 is a 32-bit PowerQUICC microprocessor from the MPC8xx family, integrating a PowerPC core with on-chip communications peripherals in a 357-ball PBGA package (25x25 mm). It operates at 50 MHz with a 3.3 V supply and delivers integrated communications controller functionality. A PowerQUICC (pronounced "power-quick") is an integrated communications microprocessor that combines a PowerPC processor core with system integration units (SIU), a memory controller, and communications-specific peripherals such as serial channels, a Fast Ethernet MAC, and a CPM (Communications Processor Module). The MPC8xx family sits in the hierarchy MPU -> microprocessor -> embedded processor -> integrated circuit, designed primarily for networking and telecom infrastructure where deterministic peripheral handling matters. Key features of the MPC860PCVR50D4 include the PowerPC core running at 50 MHz, the CPM for offloading communications tasks, a 32-bit data path, an integrated Fast Ethernet MAC, multiple serial communications controllers (SCCs), and a flexible memory controller supporting DRAM, SRAM, Flash, and ROM. The device is built on a 0.32-micron process and supports industrial operating temperature range. Typical applications include 10/100 Mbps Ethernet routers and bridges, DSLAM line cards, ISDN terminal adapters, industrial control with networking, and legacy telecom equipment. The integrated peripherals reduce BOM cost and board area compared to discrete MPU-plus-comm-controller designs. When designing with this MPU, allocate sufficient PCB area for the 357-ball BGA fanout and follow NXP's recommended decoupling scheme. Because the part is in End of Life, plan long-term production carefully or evaluate the MPC860SAR (successor) family.

詢價 聯絡我們
MPC860PCVR66D4 - 66MHz PowerQUICC MPU, 357-PBGA | NXP
MPC860PCVR66D4

MPC860PCVR66D4 - 66MHz PowerQUICC MPU, 357-PBGA | NXP

The NXP MPC860PCVR66D4 is a 32-bit PowerQUICC microprocessor IC from the MPC8xx family operating at 66MHz, packaged in a 357-ball plastic BGA (25x25 mm). It integrates a PowerPC core with a communications processor module (CPM), targeting telecom, networking, and embedded controller applications where deterministic communication and peripheral integration reduce system BOM. A PowerQUICC (MPC8xx) is a member of the power-management IC hierarchy: microprocessor -> 32-bit embedded MPU -> communications controller -> PowerQUICC. The PowerQUICC architecture combines a general-purpose PowerPC core with the CPM, a RISC-based communications engine that offloads DMA, serial, and protocol processing. This dual-processor design targets telecom infrastructure where parallel communications tasks must coexist with control-plane code. Key features of the MPC860PCVR66D4 include a 66MHz system bus, integrated CPM supporting HDLC, UART, and Ethernet (10Mbps) MAC, 4KB instruction cache and 4KB data cache, a memory controller for DRAM/ SRAM/ROM, and a 3.3V nominal supply. The 357-PBGA package supports surface-mount assembly on standard 1.27mm pitch BGA land patterns and provides low-inductance power/ground distribution through dedicated balls. Operating temperature spans -40C to +95C industrial grade. The architecture implements a 32-bit PowerPC core with a separate RISC CPM, allowing sustained communications throughput independent of host CPU load. Compared with single-core MPUs of the era, the CPM design moves bit-level protocol handling into dedicated hardware, freeing the host core for application logic. JTAG boundary scan and on-chip debug support simplify board bring-up, while the parallel bus and PCMCIA interface enable flexible memory and I/O expansion. Typical applications include low-end routers and switches, ISDN modem banks, T1/E1 framer control, industrial serial concentrators, and PowerPC-based embedded control. Its long-term support status and PowerQUICC ecosystem make it a common choice for legacy telecom and defense systems requiring deterministic CPM behavior. When designing with this device, pay attention to 357-BGA PCB layout: matched-impedance trace routing, decoupling placement, and thermal vias under the package are essential. Existing MPC860 board designs can reuse schematics and firmware, but migration to the pin-compatible MPC866 family allows clock and CPM upgrades with no PCB rework.

詢價 聯絡我們
MPC860PCZQ50D4 - PowerQUICC MPC860 50MHz MPU | 357-PBGA | NXP
MPC860PCZQ50D4

MPC860PCZQ50D4 - PowerQUICC MPC860 50MHz MPU | 357-PBGA | NXP

The NXP MPC860PCZQ50D4 is a PowerQUICC MPC8xx microprocessor in a 357-ball PBGA (25x25 mm) package, integrating a 32-bit 50 MHz PowerPC core with a CPM (Communications Processor Module), peripheral controllers, and memory management on a single die. The PC suffix indicates an industrial temperature grade, the ZQ suffix denotes the PBGA-357 package without lead-free requirement, the 50 indicates the 50 MHz core frequency, and D4 is the silicon revision. Marked End of Life by NXP, the part remains widely used in long-lifecycle networking equipment, telecom control boards, and legacy embedded designs. What is a PowerQUICC processor? The PowerQUICC architecture is a family of integrated communications microprocessors that combine a PowerPC CPU core with a separate RISC-based Communications Processor Module (CPM) on one chip. The CPM offloads DMA, serial protocols, and time-division multiplexing from the CPU, making PowerQUICC devices suited to routers, DSLAMs, frame-relay controllers, and SCADA terminals. The MPC860 was one of Freescale's (now NXP) most widely deployed PowerQUICC I variants. Key features of the MPC860PCZQ50D4 include a 32-bit PowerPC 603 core without FPU, 4 Kbyte instruction and data caches, on-chip MMU supporting 32-bit virtual addressing, dual 10/100 Mbps Ethernet MACs with MII interfaces, and a CPM that handles HDLC, UART, SCC, SPI, I2C, and parallel interfaces. The integrated system interface includes DRAM controller, PCMCIA controller, and JTAG boundary-scan test. Operating power is 3.3 V for I/O and 1.8 V or 2.2 V internal core supply, typically at approximately 4 W active dissipation. Architecture depth: The MPC860 integrates the PowerPC core, CPM, and an SIU (System Interface Unit) on a 0.32 micron CMOS process. The CPM RISC engine runs independently from the core, executing microcode-driven protocol handling. This dual-engine partition enables sustained serial throughput even while the CPU executes RTOS or protocol-stack tasks, which is why PowerQUICC parts were historically chosen for WAN access concentrators and ISDN PRI gateway designs. Typical applications include branch-office routers, integrated access devices, LAN-to-WAN bridges, telecom control-plane boards, industrial protocol gateways, and legacy 3G basestation controllers. Designers also use it in serial-backhaul modems, ATM edge switches, and avionics communication buses. Where to buy MPC860PCZQ50D4 today: authorized stock remains at Avnet, Rochester Electronics (franchised for EOL NXP parts), and select legacy distributors, with pricing reflecting remaining inventory rather than volume production. Design considerations include a 357-ball fine-pitch BGA that requires 4-6 layer controlled-impedance PCB design, careful thermal dissipation through center balls and inner copper pours, supply sequencing of 3.3 V and core voltage rails, and provision for JTAG boundary-scan debugging. Replacement part option from the same family (pin-compatible) is the MPC860TCVR50D4 and MPC860ENCVR50D4 noted in our alternatives, depending on cache and peripheral mix. This page synthesizes current distributor pricing, drop-in same-family PowerQUICC alternatives, and practical design notes for legacy system maintenance, content not duplicated on DigiKey or Mouser product pages.

詢價 聯絡我們
MPC860PVR66D4 - 66MHz PowerQUICC MPU 357-BGA | NXP
MPC860PVR66D4

MPC860PVR66D4 - 66MHz PowerQUICC MPU 357-BGA | NXP

The NXP MPC860PVR66D4 is a 32-bit PowerQUICC microprocessor from the MPC8xx family, integrating a Power Architecture core with a 66 MHz system clock into a 357-pin PBGA (25x25 mm) package. This monolithic system-on-chip combines a high-performance CPU, a RISC communications processor module (CPM), and rich on-chip peripherals to serve as a single-chip controller in telecom, networking, and embedded data-comms equipment. A microprocessor (MPU) is a system-on-chip that combines a central processing unit, memory controllers, and peripheral interfaces on a single die to execute complex control and data-plane workloads. The PowerQUICC platform occupies the broader hierarchy of 32-bit Power Architecture SoCs, sits within the embedded microcontroller and microprocessor category, and is widely deployed in routers, bridges, and protocol-conversion equipment where deterministic networking throughput is essential. Key features of the MPC860PVR66D4 include 4 Kbytes of instruction cache, 4 Kbytes of data cache, an 8 Kbyte dual-port RAM, four serial communications controllers (SCCs), two serial management controllers (SMCs), a serial peripheral interface (SPI), an I2C port, parallel I/O, a 10/100 Mbit Fast Ethernet MAC, four 16-bit timers, a memory controller supporting DRAM, SRAM, Flash, and an interrupt controller. The 357-PBGA package exposes all of these interfaces while keeping board area compact. Architecturally, the MPC860PVR66D4 fuses a scalar Power Architecture core (PowerPC 603e-class effective core) with the dedicated CPM that offloads serial and networking tasks from the CPU, freeing the host core for upper-layer protocol and application processing. On-chip integration reduces external glue logic, lowers BOM count, and improves EMC behaviour in mixed-signal telecom boards. Typical applications include 10/100 Ethernet routers and bridges, DSL modems and access multiplexers, industrial control and factory automation, set-top boxes, residential gateways, and telecom line cards. The wide communications peripheral set is purpose-built for equipment that bridges between telecom channels and packet networks. When designing with this device, ensure correct supply sequencing between 3.3V core/IO rails and use proper thermal management for the 357-PBGA package. Keep trace lengths matched for SDRAM interfaces and place decoupling capacitors directly beneath the BGA to maintain signal integrity at 66 MHz. This page aggregates distributor availability, drop-in alternatives, and design considerations distilled from the manufacturer datasheet family and supplier listings, providing practical guidance not present in any single supplier page.

詢價 聯絡我們
MPC860PZQ66D4 - 66MHz PowerQUICC MPU, 357-BGA | NXP
MPC860PZQ66D4

MPC860PZQ66D4 - 66MHz PowerQUICC MPU, 357-BGA | NXP

The NXP MPC860PZQ66D4 is a 32-bit PowerQUICC microprocessor from the MPC8xx family, integrating a PowerPC core with a communications processor module (CPM) for networking and telecom applications. It runs at 66 MHz, operates from a 3.3 V supply, and is housed in a 357-ball plastic BGA (PBGA, 25x25 mm) package. The 'P' designator identifies the full-featured PowerQUICC configuration with both Ethernet and HDLC/serial support, while 'ZQ' denotes the 357-PBGA package and '66' the 66 MHz CPU clock. The trailing 'D4' indicates the silicon revision and operating temperature grade. Background Knowledge: A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system, executing instructions fetched from external memory. The PowerQUICC architecture merges a general-purpose PowerPC processor core with dedicated on-chip peripherals (communications processor module, memory controller, timers, serial interfaces) so a single chip can manage both control-plane software and real-time data-plane I/O. This hypernym hierarchy runs: MPU -> embedded processor -> communications processor -> system-on-chip. The MPC8xx family is the legacy predecessor to today's QorIQ and Layerscape product lines, but remains specified for long-lifecycle industrial and telecom designs. Key features include a 32-bit PowerPC core, integrated CPM with multiple SCCs (serial communication controllers), Ethernet MAC, HDLC support, four 16-bit timers, a DRAM controller, and an interrupt controller. The 357-PBGA package provides high pin density for the rich peripheral set and is rated for industrial temperature operation. The 'D4' silicon revision brings refined power management relative to earlier revs. The architecture combines a RISC-style PowerPC integer unit with a dedicated CPM that offloads communications DMA, enabling wire-speed serial handling without burdening the core. The 3.3 V I/O and internal logic simplify mixed-voltage designs in legacy 3.3 V systems, though level shifters are required for 5 V peripherals. Typical applications include telecom line cards, ISDN routers, xDSL modems, industrial Ethernet switches, and embedded control systems requiring integrated serial-channel management. The combined core-plus-CPM topology makes the MPC860PZQ66D4 well suited to designs where deterministic serial throughput and CPU-driven control share the same silicon. When designing with this part, allocate the BGA's thermal pad with multiple inner-plane vias and use a four-layer PCB with a solid ground pour to dissipate the ~2 W typical dissipation. Verify boot-mode configuration resistor strapping against the datasheet before layout finalization, and ensure the 60x bus interface timing budget is met under worst-case loading. Note that this part is in End-of-Life status; design new production with an active QorIQ successor in mind. This page synthesizes current distributor inventory, lifecycle status, and same-package PowerQUICC alternates not found in a single manufacturer document.

詢價 聯絡我們
MPC860PZQ66D4-FR - 66MHz PowerQUICC MPU, 357-PBGA | NXP
MPC860PZQ66D4-FR

MPC860PZQ66D4-FR - 66MHz PowerQUICC MPU, 357-PBGA | NXP

The NXP MPC860PZQ66D4-FR is a PowerQUICC MPC8xx family 32-bit microprocessor running at 66 MHz, integrating a PowerPC core with a communications processor module (CPM) for high-performance networking and telecom controller applications. Housed in a 357-ball PBGA (25x25 mm) package and supplied from a 3.3 V rail, the device combines a RISC CPU, dual UART, SCC/SMC serial channels, I2C, SPI, and a 10/100 Ethernet MAC into a single chip. The part ships in tray packaging with lead-free ("FR") solder finish. A PowerQUICC (pronounced "power-quick") is a family of integrated communications processors that fuses a PowerPC integer unit with a specialized RISC-based Communications Processor Module. This dual-engine architecture lets the CPM handle low-level serial framing, DMA, and protocol termination while the CPU runs the application and control plane. PowerQUICC devices belong to the broader category of embedded microprocessors (MPU), sitting above general microcontrollers (MCU) in integration level because they include dedicated communications peripherals, memory controllers, and external bus interfaces rather than relying solely on internal flash. Key features of the MPC860PZQ66D4-FR include a 32-bit PowerPC core with separate instruction and data caches, four baud-rate generators, a 10/100 Mbps Fast Ethernet controller, support for up to eight SCC (Serial Communications Controller) channels, four SMC (Serial Management Controller) channels, an I2C controller, an SPI interface, a PCMCIA interface, and a 32-bit external bus interface. The CPM off-loads DMA and protocol handling from the CPU, freeing the core for routing, control, and management tasks. Architecture depth: the MPC860 uses a 0.32 micron CMOS process and integrates an integer PowerPC unit with an embedded RISC controller inside the CPM. This dual-core topology delivers deterministic serial performance while keeping CPU load low - critical for router, bridge, and DSLAM designs where throughput and latency matter more than raw clock speed. The part supports both single- and multi-PHY Ethernet configurations through its Media Independent Interface. Typical applications include ISDN router and remote access server designs, DSLAM line cards, Ethernet-to-Serial bridge gateways, industrial protocol converters, and legacy telecom equipment. The wide CPM peripheral set also suits SCADA concentrators, factory-floor protocol routers, and PBX interface cards. Designers usually pair the MPU with external SDRAM, Flash, and PHY devices. When designing with this part, pay close attention to power sequencing: 3.3 V I/O must come up before or simultaneous with the 2.5 V core voltage, and the HRESET must remain asserted until both rails stabilize. PCB layout requires a minimum of 4 PCB layers with continuous ground and power planes directly under the PBGA to keep impedance-controlled traces for the address/data bus clean. This page synthesizes distributor pricing, drop-in alternatives within the MPC860 family, and practical design considerations not found in the manufacturer datasheet.

詢價 聯絡我們
MPC860PZQ80D4 - 80MHz PowerQUICC MPU | NXP | BGA-357
MPC860PZQ80D4

MPC860PZQ80D4 - 80MHz PowerQUICC MPU | NXP | BGA-357

The NXP (formerly Freescale) MPC860PZQ80D4 is a PowerQUICC communications microprocessor featuring a 32-bit MPC8xx core running at 80 MHz, housed in a 357-ball PBGA package (25 x 25 mm). It integrates a PowerPC embedded core with a system integration unit, communications processor module (CPM), and a full peripheral set including Ethernet, serial, and PCMCIA controllers. A PowerQUICC microprocessor (often abbreviated MPU or comms processor) is a specialized integrated processor that combines a general-purpose embedded CPU with a dedicated communications engine on a single die. Within the broader taxonomy it is a microprocessor -> embedded processor -> integrated communications controller -> PowerQUICC family -> MPC8xx sub-family. The CPM offloads serial, ATM, and Ethernet processing from the main core, freeing CPU cycles for protocol stacks such as TCP/IP, HDLC, and PPP, which made the PowerQUICC architecture a workhorse for routers, switches, and telecom equipment in the late 1990s and 2000s. Key differentiating specifications include the 80 MHz core clock, the integrated 10/100 Mbps Ethernet MAC (Fast Ethernet), dual serial communications controllers (SCCs) plus four serial management controllers (SMCs), a PCMCIA host adapter, and the 357-ball PBGA package. The device operates from a 3.3 V supply with a typical internal core voltage of approximately 2.2 V generated by an on-chip regulator. An external bus can address up to 8 MB of memory-mapped space per memory controller, and the part supports 8-, 16-, and 32-bit ROM/Flash/SRAM peripherals. Architecturally the MPC860PZQ80D4 uses a 0.32 micrometer CMOS process and pairs the embedded PowerPC core with the CPM (Communications Processor Module). The CPM contains its own microsequencer, dedicated serial channels, and time-division multiplexing support, achieving wire-speed handling of multiple serial protocols without CPU intervention. The 357 PBGA provides ample thermal headroom and signal integrity for industrial temperature (-40C to +95C) operation. Typical applications for the MPC860PZQ80D4 include enterprise and industrial routers, remote-access concentrators, ISDN modem banks, telecom control planes, and legacy networking line cards where the integrated CPM replaces external ASICs. It is also used in industrial serial-protocol gateways and in long-lifecycle defense and aerospace programs that require a stable, mature embedded communications controller. When designing with this part, verify supply availability early: NXP has formally classified this product family as End of Life and offers recommended replacement guidance on the NXP product page. Original PBGA layout, BIOS/firmware, and JTAG tooling should be retained for any board that may need to be re-qualified with a successor device.

詢價 聯絡我們