AD5142ABCPZ10-RL7 vs AD5142WBCPZ10-RL7 比較
詳細並排比較 AD5142ABCPZ10-RL7 由 Analog Devices 與 AD5142WBCPZ10-RL7 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Analog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ 啟用中規格比較
| 參數 | AD5142ABCPZ10-RL7 | AD5142WBCPZ10-RL7 |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Amplifier ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Number of Potentiometers | 2 (dual) | — |
| Nominal End-to-End Resistance (R-AB) | 10 kΩ | — |
| Number of Taps | 256 positions | 256 per channel |
| 介面 | I²C-compatible (SCL up to 3 MHz) | — |
| 記憶體類型 | Non-volatile EEPROM | — |
| Resistor Tolerance | ±8% | ±8% |
| Temperature Coefficient | 35 ppm/°C nominal | — |
| Wiper Resistance (ends of array) | 40 Ω typical | — |
| Continuous Current on A/B/W Pins | ±6 mA max | — |
| Supply Voltage (VDD) | 2.3 V to 5.5 V | 2.3 V to 5.5 V (single supply) |
| 工作溫度 | -40 °C to +125 °C | — |
| 封裝 | 16-lead LFCSP (3 mm × 3 mm) with EP | 16-LFCSP (3 mm × 3 mm) with exposed pad (CP-16-22) |
| 安裝類型 | Surface Mount | Surface Mount |
| Taper | Linear | — |
| RoHS 狀態 | Compliant | Compliant |
| AEC-Q100 Qualification | Not AEC-Q100 qualified (industrial grade) | — |
| Soft Reset | Yes (loads default wiper setting) | — |
| 功能 | — | Digital Potentiometer (Dual, Nonvolatile) |
| Number of Channels | — | 2 |
| End-to-End Resistance (R-AB) | — | 10 kΩ nominal |
| Wiper Resistance | — | [DATA_NEEDED: wiper resistance typical] |
| Digital Interface | — | SPI (serial peripheral interface), 16-bit command word |
| Maximum SPI Clock | — | 50 MHz |
| Terminal Current (A, B, W pins) | — | ±6 mA |
| 工作溫度範圍 | — | -40 °C to +125 °C (AEC-Q100 automotive Grade 1) |
| Nonvolatile Memory Write Cycles | — | 50,000 cycles typical |
| MSL 等級 | — | [DATA_NEEDED: MSL rating] |
| Automotive Qualification | — | AEC-Q100 Grade 1 (WB suffix) |
| Lead-Free / Halogen-Free | — | Yes |
| A/B/W Terminal Voltage Range | — | VSS to VDD (rail-to-rail) |
| Channel-to-Channel Matching | — | [DATA_NEEDED: matching tolerance] |