BTS70021EPPXUMA1 vs BTS700121ESPXUMA2 比較
詳細並排比較 BTS70021EPPXUMA1 由 Infineon 與 BTS700121ESPXUMA2 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ 啟用中
規格比較
| 參數 | BTS70021EPPXUMA1 | BTS700121ESPXUMA2 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Family | PROFET+2 12V | — |
| 拓撲 | Smart High-Side Switch, N-Channel MOSFET | High-Side |
| Maximum Continuous Load Current | 21 A | — |
| On-State Resistance (RDS(on)) | 2.6 mOhm typical | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | — |
| Transient Supply Voltage | 28 V (load dump tolerant) | — |
| Standby Current | [DATA_NEEDED: typical uA value] | — |
| Current Sense Output (IS) | Analog proportional load current | — |
| Fault Output (DEN/IN) | Yes, latched | — |
| Reverse Polarity Protection | Yes (ReverSave) | — |
| Overload Protection | Yes (current limit) | — |
| Short-Circuit Protection | Yes (latched) | — |
| Over-Temperature Protection | Yes (thermal shutdown with restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes | — |
| Load Dump Clamp Voltage | 41 V typical | — |
| Open-Load Detection | Yes (on-state and off-state) | Yes (on-state and off-state) |
| PWM Capability | Yes, up to [DATA_NEEDED: max PWM frequency] | — |
| 工作溫度範圍 | -40 C to +150 C junction | -40 C to +150 C |
| 封裝 | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) |
| 安裝類型 | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 automotive qualified | — |
| RoHS 狀態 | Compliant (Green Product) | Compliant |
| 功能 | — | Power Switch / Driver 1:1 N-Channel |
| Continuous Load Current | — | 31.3 A |
| Family | — | PROFET (Protected FET) |
| Nominal Supply Voltage | — | 13.5 V |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Ron typ @ 25 C] |
| Number of Channels | — | 1 |
| Number of Terminals | — | 24 |
| Terminal Pitch | — | 0.65 mm |
| Max Junction Temperature | — | 150 C |
| Protection Features | — | Overload, short-circuit, over-temperature, reverse battery, ground loss |
| Diagnostic Output | — | Analog current sense (IS pin) |