MK64FN1M0VLL12 vs MK64FN1M0VLQ12 比較
詳細並排比較 MK64FN1M0VLL12 由 NXP Semiconductors 與 MK64FN1M0VLQ12 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
NXP Semiconductors
MK64FN1M0VLQ12 - 120MHz Cortex-M4F MCU 1MB Flash LQFP-144 | NXP
MK64FN1M0VLQ12 ✓ 啟用中規格比較
| 參數 | MK64FN1M0VLL12 | MK64FN1M0VLQ12 |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 類別 | Microcontrollers | Microcontrollers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Manufacturer | NXP Semiconductors | — |
| Series | Kinetis K64 | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP) | — |
| Core Size | 32-bit | 32-bit |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Program Memory Size | 1 MB (1M x 8) Flash | — |
| RAM Size | 256 KB SRAM | — |
| Flash Memory Type | FTFE - Non-Flex (4 KB sector, 8-byte phrase) | — |
| Supply Voltage (VDD) | 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V rails) | — |
| 工作溫度範圍 | -40 C to +105 C (industrial) | -40C to +105C (industrial) |
| 封裝 / 外殼 | 100-LQFP, 14x14 mm, 0.5 mm pitch | — |
| 安裝類型 | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed OTG, on-chip FS transceiver | USB 2.0 Full-Speed OTG with on-chip PHY (crystal-less capable) |
| Ethernet | 10/100 Mbps MAC, MII / RMII interface | 10/100 Mbps MAC with IEEE 1588 hardware timestamping (MII/RMII) |
| Hardware Cryptography | AES-128/256, DES/3DES, SHA-1/256, RSA, TRNG | — |
| ADC | 16-bit SAR, up to 2x 16-ch (peripherals vary by die) | 2 x 16-bit SAR ADCs, up to 818 ksps (12-bit mode) |
| DAC | 12-bit | 1 x 12-bit DAC |
| GPIO | [DATA_NEEDED: GPIO count for this LQFP-100 mask] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS0/1/3 with RTC retention | — |
| RoHS 狀態 | Compliant | Compliant |
| MSL 等級 | 3 (per JEDEC J-STD-020) | 3 (per JEDEC J-STD-020) |
| Core | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Program Memory | — | 1 MB (1M x 8) Flash |
| SRAM | — | 256 KB |
| 封裝 | — | 144-LQFP (20x20 mm) |
| Timers/PWM | — | FlexTimer (FTM), Programmable Delay Block (PDB), Periodic Interrupt Timer (PIT) |
| Serial Interfaces | — | 3 x SPI, 4 x I2C, 6 x UART, 1 x CAN, 1 x I2S/SAI |
| Operating Voltage | — | 1.71 V to 3.6 V (single supply) |