NE5534P vs NE5534IP 比較
詳細並排比較 NE5534P 由 Texas Instruments 與 NE5534IP 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | NE5534P | NE5534IP |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Amplifier Type | Single operational amplifier | — |
| 供應電壓 | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typ |
| Equivalent Input Noise Voltage | 3.5 nV/√Hz | — |
| Slew Rate | 13 V/µs typical | 13 V/µs typ |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typ |
| DC Voltage Gain | 100 V/V typical | 100 dB typ |
| Output Voltage Swing | 32 V peak-to-peak typical with VCC = ±18 V and RL = 600 Ω | — |
| Number of Amplifiers | 1 | — |
| 封裝 | 8-pin PDIP | 8-pin PDIP |
| 安裝類型 | Through-hole | Through-hole |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | 0°C to 70°C |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: typical and maximum input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: typical and maximum input bias current] |
| Output Current | [DATA_NEEDED: output current] | — |
| 靜態電流 | [DATA_NEEDED: quiescent current] | — |
| RoHS 狀態 | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| Conflict Minerals Status | unknown | — |
| Product Type | — | Single low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Equivalent Input Noise Voltage Density | — | 3.5 nV/√Hz |
| Peak-to-Peak Output Voltage Swing | — | 32 V typ with VCC = ±18 V |
| Input Offset Current | — | 500 nA |
| Maximum Input Offset Voltage | — | 5000 µV |
| 供應電流 | — | [DATA_NEEDED: typical and maximum supply current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing by supply condition] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |