NE5534P vs NE5534IP 비교
다음의 상세 나란히 비교: NE5534P 제조: Texas Instruments 및 NE5534IP 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | NE5534P | NE5534IP |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Single operational amplifier | — |
| 공급 전압 | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typ |
| Equivalent Input Noise Voltage | 3.5 nV/√Hz | — |
| Slew Rate | 13 V/µs typical | 13 V/µs typ |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typ |
| DC Voltage Gain | 100 V/V typical | 100 dB typ |
| Output Voltage Swing | 32 V peak-to-peak typical with VCC = ±18 V and RL = 600 Ω | — |
| Number of Amplifiers | 1 | — |
| 패키지 | 8-pin PDIP | 8-pin PDIP |
| 실장 유형 | Through-hole | Through-hole |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | 0°C to 70°C |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: typical and maximum input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: typical and maximum input bias current] |
| Output Current | [DATA_NEEDED: output current] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| RoHS 상태 | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| Conflict Minerals Status | unknown | — |
| Product Type | — | Single low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Equivalent Input Noise Voltage Density | — | 3.5 nV/√Hz |
| Peak-to-Peak Output Voltage Swing | — | 32 V typ with VCC = ±18 V |
| Input Offset Current | — | 500 nA |
| Maximum Input Offset Voltage | — | 5000 µV |
| 공급 전류 | — | [DATA_NEEDED: typical and maximum supply current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing by supply condition] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |