NE5534P vs NE5534IP 对比
详细并排对比 NE5534P 出自 Texas Instruments 和 NE5534IP 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
规格对比
| 参数 | NE5534P | NE5534IP |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Amplifier Type | Single operational amplifier | — |
| 电源电压 | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typ |
| Equivalent Input Noise Voltage | 3.5 nV/√Hz | — |
| Slew Rate | 13 V/µs typical | 13 V/µs typ |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typ |
| DC Voltage Gain | 100 V/V typical | 100 dB typ |
| Output Voltage Swing | 32 V peak-to-peak typical with VCC = ±18 V and RL = 600 Ω | — |
| Number of Amplifiers | 1 | — |
| 封装 | 8-pin PDIP | 8-pin PDIP |
| 安装类型 | Through-hole | Through-hole |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | 0°C to 70°C |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: typical and maximum input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: typical and maximum input bias current] |
| Output Current | [DATA_NEEDED: output current] | — |
| 静态电流 | [DATA_NEEDED: quiescent current] | — |
| RoHS 状态 | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| Conflict Minerals Status | unknown | — |
| Product Type | — | Single low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Equivalent Input Noise Voltage Density | — | 3.5 nV/√Hz |
| Peak-to-Peak Output Voltage Swing | — | 32 V typ with VCC = ±18 V |
| Input Offset Current | — | 500 nA |
| Maximum Input Offset Voltage | — | 5000 µV |
| 电源电流 | — | [DATA_NEEDED: typical and maximum supply current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing by supply condition] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |