A3P250L-VQ100 - 250K-Gate Low-Power FPGA | Microchip
MPN: A3P250L-VQ100 ✗ 停產A3P250L-VQ100 概覽
An FPGA is a programmable digital semiconductor used to implement logic functions in parallel on one integrated circuit. A device in the ProASIC3L family belongs to the broader hierarchy of programmable logic devices, where it sits between mask-programmable custom logic and higher-density FPGA and CPLD families. Its flash configuration technology retains the programmed logic after power is removed, allowing the same device to be reprogrammed during development or field updates without replacing the package.
The A3P250L-VQ100 provides 68 I/O in a 100-pin TQFP package, offering a relatively compact surface-mount option for embedded control, interface bridging, signal processing, and general-purpose programmable logic. Its low-power design distinguishes it from the related A3P250 device, while the -VQ100 ordering code identifies the specified package and standard configuration variant. The listed 1.2 V core technology also makes board-level power sequencing and I/O compatibility important design considerations.
Based on the manufacturer’s product information for the ProASIC3 family, ProASIC3 devices emphasize reprogrammability, low total cost of ownership, small-footprint packages, and integrated system features. The A3P250L designation specifically identifies the low-power branch of that family. Exact operating-temperature ratings, configuration-memory organization, I/O standards, and AC timing limits for this ordering code should be confirmed in the ProASIC3L family documentation before a production design is released.
Typical applications include industrial control logic, instrumentation, communications-interface adapters, embedded system bridges, and low-power embedded controllers. The 68-I/O count is useful for designs that need moderate parallel connectivity without moving to a larger package. Designers should account for the available configuration pins, programming interface, decoupling, unused I/O behavior, and system-level voltage compatibility when defining the board footprint.
A robust power layout should provide stable core and I/O supplies while keeping high-current return paths away from sensitive configuration and programmable-logic resources. PCB signal-integrity analysis is particularly important when external buses or memories operate at the upper supported clock rates, since package transitions, trace impedance, and loading can affect timing margin.
This product record combines package and device details with practical programming, replacement, sourcing, and design guidance. It also distinguishes genuine same-footprint alternatives from parts that would require package or board changes, helping engineers evaluate migration paths without confusing electrical equivalence with mechanical compatibility.
直接替換替代品,適用於 A3P250L-VQ100 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: A3P250L-VQ100 (相同外形與佔位) — 差異在於 Configuration Memory, Core Supply Voltage, Package, RoHS Status, System Gates.
A3P250L-1VQ100I
✅ 直接替換📋 參考替代品(不在目錄中)
A3P250L-VQ100I
✅ 直接替換聯絡詢價
查看資料表 →A3P250L-VQG100I
✅ 直接替換聯絡詢價
查看資料表 →A3P250-VQG100I
✅ 直接替換📋 參考替代品(不在目錄中)
A3P250-VQ100
✅ 直接替換聯絡詢價
查看資料表 →A3P250L-VQ100 最大額定值與電氣特性
| Device Type | ProASIC3L low-power Flash FPGA |
| Logic Capacity | Approximately 250,000 gates |
| Performance Figure | 781.25 MHz |
| Manufacturing Technology | 130 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Supply Voltage Range | 1.14 V to 1.575 V |
| User I/O Count | 68 I/O |
| 封裝 | 100-pin VQFP/TQFP, 14 x 14 mm |
| 安裝類型 | Surface mount |
| Configuration Memory | Non-volatile Flash |
| Programmability | User-programmable and reprogrammable |
| Product Family | ProASIC3L |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
A3P250L-VQ100 100-pin vqfp/tqfp, 14 x 14 mm 腳位配置指南
A3P250L-VQ100(100-pin vqfp/tqfp, 14 x 14 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: A3P250L-VQ100.
請參閱 資料表 以查看完整腳位配置。
典型應用
A3P250L-VQ100 適用於 6 應用s: Industrial Control Logic, Communication Interface Bridging, Instrumentation Signal Processing, Data Acquisition Control, Embedded Security and Access Control, Low-Power Portable Equipment.
Industrial Control Logic
The A3P250L-VQ100 suits compact industrial controllers that combine parallel I/O, sequencing logic, and configurable state machines. Its approximately 250,000 gates and 68 I/O provide substantial logic capacity while retaining a 100-pin surface-mount footprint, and the 130 nm CMOS implementation operates from a 1.2 V core. A designer can implement motor interlocks, sensor conditioning logic, timing sequences, and communication-format conversion in one programmable device. The low-power ProASIC3L positioning is useful when the controller spends significant time waiting for external events, although actual standby and active-current measurements should guide thermal and power-budget calculations.
推薦
Communication Interface Bridging
The A3P250L-VQ100 can implement protocol conversion, bus arbitration, FIFO-based data routing, and test-point logic in communications equipment. Sixty-eight I/O provide enough parallel connections for multi-bit buses and control signals, while approximately 250,000 gates support concurrent state machines and datapaths. Its 1.2 V core and non-volatile Flash configuration suit equipment where the logic must remain immediately available after power restoration. The principal board-level concern is signal integrity: external bus rates, input thresholds, output timing, and package-transition effects must be checked against the ProASIC3L timing specifications before release.
推薦
Instrumentation Signal Processing
For measurement and instrumentation systems, the A3P250L-VQ100 can implement acquisition control, digital filtering, calibration tables, trigger logic, and data formatting. Its programmable architecture allows a fixed board design to accommodate several sensor interfaces, while the 68-I/O count supports parallel sensor inputs, status indicators, and external memory or converter interfaces. The non-volatile configuration permits rapid firmware-like updates without volatile boot memory, and the low-power family is attractive for portable or intermittently powered test equipment. Analog precision and conversion quality remain functions of the external signal chain rather than the FPGA itself.
推薦
Data Acquisition Control
The A3P250L-VQ100 is appropriate for coordinating multiplexers, ADC control, sample counters, buffer management, and data-packaging logic in acquisition systems. Approximately 250,000 gates are sufficient for parallel timing, address generation, and protocol conversion, while 68 I/O permit direct connection to converters and control signals. Its Flash-based configuration supports rapid design iteration and predictable restart behavior after power cycling. For high-rate acquisition, engineers should treat the 781.25 MHz listed figure as a family performance specification rather than a guaranteed application throughput and verify setup and hold timing for the actual I/O standard.
推薦
Embedded Security and Access Control
The A3P250L-VQ100 can consolidate key-door logic, credential checks, event logging control, alarm sequencing, and communications framing in an embedded security controller. Sixty-eight I/O allow external sensors, indicators, and secure-storage interfaces to be managed without a large FPGA package, while the low-power ProASIC3L family can help control energy use in access terminals. Non-volatile configuration preserves the programmed function across power cycles. Designers should verify that the selected security implementation, configuration protection, and update process meet the product's threat model rather than relying on device features alone.
推薦
Low-Power Portable Equipment
The A3P250L-VQ100 fits portable and intermittently powered products that need flexible logic alongside a primary microcontroller. Its low-power ProASIC3L designation supports designs targeting reduced current consumption, and approximately 250,000 gates provide enough capacity for peripheral aggregation, low-speed display or sensor control, and power-state sequencing. The 100-pin VQFP package keeps board area manageable, but portable designs must carefully budget regulator efficiency, local bypass capacitance, and I/O leakage. Sleep-state behavior, Flash access time, wake-up timing, and I/O retention should be confirmed from the family documentation for the selected configuration.
推薦
推薦產品摘要
工程參考資料,適用於 A3P250L-VQ100 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | A3P250L-1VQ100I | A3P250L-VQ100I | A3P250L-VQG100 | A3P250-VQG100I | A3P250-VQ100 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin VQFP/TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin VQFP | 100-pin VQFP | 100-pin TQFP |
| FPGA Family | ProASIC3L | ProASIC3L | ProASIC3L | ProASIC3L | ProASIC3 | ProASIC3 |
| Logic Capacity | Approximately 250,000 gates | Approximately 250,000 gates | Approximately 250,000 gates | Approximately 250,000 gates | Approximately 250,000 gates | Approximately 250,000 gates |
| Manufacturing Technology | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS |
| Temperature-Grade Suffix | No I suffix | I suffix | I suffix | No I suffix | I suffix | No I suffix |
主要差異化特點
- Low-power ProASIC3L family selection (對比A3P250-VQ100)
- Same-family speed-grade migration (對比A3P250L-1VQ100I)
- Industrial-temperature ordering option (對比A3P250L-VQ100)
- Compact programmable-logic integration (對比A3P250-FGG144I)
設計說明
Decouple the 1.2 V core close to the package power and ground pins, and provide separate clean routing for I/O supply domains. Estimated core dissipation equals 1.2 V multiplied by the measured average core current; add measured I/O and configuration-path current before applying the package thermal limit. The listed 1.14 V to 1.575 V supply range does not establish every I/O voltage combination, so verify each rail against the family electrical tables and external interface drivers.
Preserve the 100-pin VQFP land pattern and confirm whether an exposed thermal pad is present before releasing the PCB footprint. Place bypass capacitors at the supply pins with short ground returns, avoid placing sensitive analog routing beneath active FPGA routes, and use a solid ground plane. For an obsolete device, include all programming, configuration, test, and recovery connections in the board design so an alternative device can be evaluated without adding a new adapter hardware revision.
Review every external interface with the 781.25 MHz family performance figure treated as a device capability rather than a guaranteed board-level rate. Check input thresholds, I/O drive strength, capacitive loading, trace impedance, and package-transition timing for the actual standards used. Use series damping on high-speed outputs only after simulation or measurement, and avoid routing clocks adjacent to sensitive configuration or programming signals.
Do not treat a similar ProASIC3 or ProASIC3L suffix as automatically interchangeable. The -1 designation changes speed grade, I denotes an industrial-temperature option, and VQG ordering codes can carry package or qualification distinctions. Before substitution, compare the pin-description table, electrical limits, configuration protocol, Flash*Freeze behavior, security settings, and bitstream compatibility. A mechanical footprint match alone is not sufficient for a production drop-in decision.
合規資訊
The available listing does not provide exact compliance declarations for A3P250L-VQ100. Obtain the current manufacturer material compliance record for the exact ordering code before use in a regulated design.