A3P400-2FG144 - 97-I/O ProASIC3 FPGA | Microchip
MPN: A3P400-2FG144 ✓ 啟用中A3P400-2FG144 概覽
A ProASIC3 FPGA is a reprogrammable logic device that combines configurable digital logic, embedded block RAM, programmable I/O, and dedicated clocking resources on a single monolithic chip. Within the semiconductor hierarchy, it belongs to the flash-programmable FPGA class rather than mask-programmable logic or application-specific standard products. This combination supports short development cycles, field reconfiguration, and low total cost of ownership for low- to medium-volume embedded systems.
Key features include 97 user I/Os, 55,296 logic cells, up to 54 Kb of block RAM, single-chip implementation, and reprogrammable on-chip flash configuration memory. The -2 suffix identifies the speed grade, while FG144 identifies the 144-ball package. The family is positioned for industrial control, communications, instrumentation, consumer electronics, and embedded processing systems requiring deterministic parallel I/O and user-programmable logic.
The ProASIC3 architecture uses a 130 nm flash-based CMOS process with seven metal layers and six copper layers. Programmable logic is organized into configurable cells that can implement combinational and sequential functions, while dedicated block RAM supports buffers, lookup tables, and control-plane data storage. The 97-I/O count allows substantial parallel connectivity to external processors, transceivers, displays, sensors, and industrial peripherals.
Typical applications include industrial automation modules, data-acquisition systems, communication interfaces, motor-control support logic, instrument front ends, and embedded platform controllers. A 13 mm by 13 mm 144-FPBGA arrangement supports compact designs where fine-pitch routing and multilayer PCB layout are acceptable. The device is also suited to legacy-product refresh designs where an existing board can be retained while programmable logic is updated.
During PCB design, place decoupling capacitors adjacent to every supply pin, route high-speed clock and differential signals on controlled-impedance layers, and follow the package ball map in the Microchip A3P400 documentation. Confirm the exact I/O standard, bank voltage, and configuration scheme for the system before release because these selections determine terminations, level shifting, and boot behavior.
This page consolidates device specifications, package details, drop-in upgrade options, comparison data, and implementation guidance for engineers evaluating the A3P400-2FG144 for legacy and new flash-FPGA designs.
直接替換替代品,適用於 A3P400-2FG144 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: A3P400-2FG144 (相同外形與佔位) — 差異在於 Configuration Memory, Package, Device Type, Process Technology, Mounting Type.
A3P400-2FGG144I
✅ 直接替換📋 參考替代品(不在目錄中)
M1A3P400-2FG144
✅ 直接替換📋 參考替代品(不在目錄中)
A3P400-FG144I
✅ 直接替換聯絡詢價
查看資料表 →A3P400-2FG144I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
A3P400-FG144
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →A3P400-2FG144 最大額定值與電氣特性
| Device Type | ProASIC3 Flash FPGA |
| Logic Cells | 55,296 cells |
| User I/O | 97 I/O |
| Block RAM | 54 Kb |
| 供應電壓 | 1.5 V |
| Speed Grade | -2 |
| Process Technology | 130 nm CMOS |
| Metal Layers | 7 layers with 6 copper layers |
| 封裝 | 144-LBGA (144-FPBGA) |
| Package Dimensions | 13 mm x 13 mm |
| 安裝類型 | SMD/SMT |
| 工作溫度 | 0 °C to 70 °C |
| Packaging | Tray |
| Configuration Memory | Reprogrammable flash |
A3P400-2FG144 13 mm x 13 mm 腳位配置指南
A3P400-2FG144(13 mm x 13 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: A3P400-2FG144.
請參閱 資料表 以查看完整腳位配置。
典型應用
A3P400-2FG144 適用於 6 應用s: Industrial Automation and Control, Data-Acquisition and Instrumentation, Communication Interface Bridging, Motor-Control Support Logic, Test and Measurement Equipment, Embedded Platform Control.
Industrial Automation and Control
The A3P400-2FG144 suits compact industrial control modules that require parallel sensor inputs, actuator outputs, and deterministic control logic. Its 97 user I/Os provide connections for digital encoders, limit switches, relay drivers, and operator interfaces, while 55,296 logic cells can implement motion sequencing or machine-state control. The 0 °C to 70 °C commercial rating covers controlled indoor equipment, and the 1.5 V core supply simplifies power-tree integration. The trade-off is the 144-fine-pitch BGA footprint, which requires careful escape routing, multilayer construction, and adequate X-ray inspection after assembly.
推薦
Data-Acquisition and Instrumentation
In acquisition systems, the A3P400-2FG144 can collect parallel ADC outputs, manage triggers, and perform local data conditioning before forwarding results to a processor. The 97 available I/Os accommodate multiple converter channels, status signals, clocks, and communication interfaces, while 54 Kb of block RAM supports buffering and protocol formatting. Its 55,296 logic cells are useful for channel interleaving, filtering control, and time-base management. Designers should confirm each I/O bank's supported voltage and edge rates because the A3P400-2FG144 is a 1.5 V core device whose external interface capabilities depend on bank configuration.
推薦
Communication Interface Bridging
The A3P400-2FG144 can bridge legacy parallel interfaces to serial peripherals through dedicated logic and block RAM. With 55,296 logic cells and 54 Kb of block RAM, it is appropriate for protocol converters, test interfaces, and command-frame assemblers that do not require a large soft processor. Its 97 I/Os provide enough parallel bandwidth for byte-wide buses, status handshakes, and clock-domain crossing between external converters and a host processor. The principal design constraint is timing closure at the selected I/O standard, so board-level trace lengths and package ball assignments should be reviewed during schematic capture.
推薦
Motor-Control Support Logic
The A3P400-2FG144 is useful as an auxiliary controller for motor-drive systems requiring fast digital sequencing, fault capture, and interface isolation. Its 97 I/Os can accept position signals, current-sense comparator outputs, and gate-driver status feedback, while programmable logic can implement commutation sequencing and protection timers. The 54 Kb block RAM supports status history and diagnostic records. Compared with a microcontroller-only implementation, the FPGA provides parallel deterministic handling of many sensor channels. Engineers must verify that the selected I/O standards can drive the external interfaces and must preserve timing margins across temperature and process corners.
推薦
Test and Measurement Equipment
In automated test equipment, the A3P400-2FG144 can implement pattern generation, fixture control, and parallel measurement sequencing. The 97 I/Os allow the device to coordinate DUT stimulus, capture comparator results, and manage handshake signals with a test controller. Its reprogrammable flash configuration also supports board-level production updates when test logic must be revised without changing hardware. The 144-LBGA package provides dense connectivity in a 13 mm by 13 mm area, but fine-pitch assembly and controlled-impedance routing increase PCB complexity compared with a leaded or larger-pitch device.
推薦
Embedded Platform Control
The A3P400-2FG144 can serve as a companion logic device beside a host processor in embedded platforms that need boot control, peripheral routing, or dedicated real-time functions. Its 55,296 logic cells allow small state machines and interface translators to operate concurrently without loading the host MCU, while 97 I/Os expand external peripheral access. Flash-based configuration allows field updates and simplifies design iteration. A critical integration check is the configuration interface and boot ordering between the FPGA and host processor; both devices must agree on reset release, programming signals, and any configuration watchdog behavior.
推薦
推薦產品摘要
工程參考資料,適用於 A3P400-2FG144 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | A3P400-2FGG144I | M1A3P400-2FG144 | A3P400-FG144I | A3P400-2FG144I | A3P400-FG144 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-LBGA (144-FPBGA) | 144-LBGA - same footprint | 144-LBGA - same footprint | 144-LBGA - same footprint | 144-LBGA - same footprint | 144-LBGA - same footprint |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Logic Cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells | 55,296 cells |
| User I/O | 97 I/O | 97 I/O | 97 I/O | 97 I/O | 97 I/O | 97 I/O |
| Block RAM | 54 Kb | 54 Kb | 54 Kb | 54 Kb | 54 Kb | 54 Kb |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
主要差異化特點
- Published same-family FG144 migration options retain the ProASIC3 architecture (對比A3P400-2FGG144I)
- Explicit -2 speed designation supports controlled timing selection (對比A3P400-FG144I)
- Commercial-temperature option aligns with controlled indoor equipment (對比A3P400-2FG144I)
- Direct tray ordering for the named production configuration (對比M1A3P400-2FG144)
設計說明
Treat the 144-LBGA footprint as a fine-pitch assembly requiring a multilayer PCB. Follow the Microchip package drawing for pad, solder-mask, and paste-land geometry rather than deriving dimensions from a generic BGA footprint. Provide a continuous power and ground plane, route escape traces on the top layer, and place high-frequency decoupling close to the device-side supply connections.
Design the 1.5 V core rail with low-impedance distribution and place local ceramic decoupling at each supply connection allowed by the package layout. Separate sensitive analog or reference-supply requirements from digital switching return currents where the device supports dedicated supply pins. Confirm current limits, ramp rate, and power-up sequencing in the manufacturer device data before setting regulator and reset timing.
Assign clock inputs and any high-speed user interfaces to pins whose bank voltage and I/O standard match the circuit. Keep configuration signals away from noisy switching nets, route them with consistent return paths, and isolate the FPGA from aggressive external drivers with appropriate series termination. Because this is a 13 mm by 13 mm 144-ball package, ball-escape congestion should be resolved during schematic partitioning rather than after routing.
Do not treat similarly suffixed A3P400 ordering codes as automatic equivalents. The G, I, M1, and speed-grade suffixes affect package, temperature, or performance selections. Before releasing a substitution, compare the complete ordering code, 144-ball pin map, supported I/O standards, configuration method, operating-temperature range, and the timing constraints of the original design.
合規資訊
The A3P400-2FG144 is an FPGA rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or the exact order-code documentation.