ADF4213BRU-REEL - 3 GHz PLL Frequency Synthesizer | Analog Devices
MPN: ADF4213BRU-REEL ✓ 啟用中ADF4213BRU-REEL 概覽
A PLL frequency synthesizer belongs to the clock-generation and timing-control hierarchy: it compares a phase-detector input with a divided feedback signal, drives an internal charge pump and voltage-controlled oscillator, and then locks an output frequency to a stable reference. The ADF4213 combines this phase-locking architecture with a programmable divider, allowing a relatively low-frequency reference to establish an RF output up to 3 GHz.
Key characteristics include a 3 GHz maximum synthesis frequency, a 20-TSSOP package, CMOS input and clock outputs, and operation from a 2.7 V to 5.5 V supply. A separate charge-pump supply permits an extended tuning voltage, while the programmable feedback divider supports integer-N frequency synthesis. These features make the device suitable where the output must be derived accurately from a reference clock without using a separate high-frequency oscillator.
The device is specified as a single PLL with one clock output and a differential input/output phase-detector arrangement. Its architecture supports applications spanning RF and IF signal chains, microwave down-conversion, clock generation, and phase locking. The separate charge-pump supply is particularly useful when the required tuning range exceeds what the main analog supply can provide.
Typical uses include RF receivers, transmit and receive conversion stages, frequency analyzers, laboratory instruments, and industrial frequency-generation equipment. When its output drives a mixer or converter, system phase noise, reference quality, loop bandwidth, and integer-N division ratio directly influence the final signal quality.
A key design consideration is the power relationship between the analog supply, charge-pump supply, and output buffer. Decoupling capacitors should be placed close to the supply pins, while the reference and feedback routes should remain short and controlled. The 20-pin TSSOP footprint requires careful assembly spacing and thermal verification under the maximum expected operating condition.
This page combines device specifications, practical PLL design guidance, drop-in alternatives, application fit, and engineering trade-offs to support faster component selection and PCB implementation.
直接替換替代品,適用於 ADF4213BRU-REEL — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADF4213BRU-REEL (相同外形與佔位) — 差異在於 Package, Charge Pump, Device Type, PLL Architecture, Product Type.
ADF4216BRU-REEL
✅ 直接替換聯絡詢價
查看資料表 →ADF4216BRUZ-RL
✅ 直接替換聯絡詢價
查看資料表 →ADF4212LBRUZ-RL
✅ 直接替換聯絡詢價
查看資料表 →ADF4113BRU-REEL
✅ 直接替換📋 參考替代品(不在目錄中)
ADF4112BCP-REEL
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ADF4213BRU-REEL 規格
| Product Type | Clock/frequency synthesizer IC |
| PLL Architecture | 1 PLL |
| Maximum Output Frequency | 3 GHz |
| Minimum Output Frequency | 0 MHz |
| 工作電源電壓 | 2.7 V to 5.5 V |
| Input Signal Type | CMOS |
| Output Signal Type | Clock |
| Phase Detector Input | Differential |
| Maximum Input-to-Output Ratio | 3:1 |
| Number of Circuits | 1 circuit |
| Charge Pump Supply | Separate VP supply |
| 安裝類型 | Surface mount |
| 封裝 | 20-TSSOP, 4.40 mm width |
| Terminal Count | 20 terminals |
| Packaging | Tape and reel |
| Temperature Grade | Industrial grade |
| RoHS 狀態 | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
ADF4213BRU-REEL 20-tssop, 4.40 mm width 腳位配置指南
ADF4213BRU-REEL(20-tssop, 4.40 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADF4213BRU-REEL.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADF4213BRU-REEL 適用於 6 應用s: RF Receiver Clock Generation, Microwave Down-Conversion, Precision Test Instrumentation, Industrial Frequency Generator, Clock Multiplier Module, Communication IF Signal Path.
RF Receiver Clock Generation
The ADF4213BRU-REEL can generate an RF or IF clock up to 3 GHz from a stable reference, allowing receiver conversion stages to share one frequency source. Its differential phase-detector input and programmable feedback divider suit integer-N phase-locked-loop designs. The main design benefit is avoiding an independent high-frequency oscillator, although reference phase noise and the divider ratio set a practical limit on close-in phase noise.
推薦
Microwave Down-Conversion
A 3 GHz synthesis range makes ADF4213BRU-REEL useful for driving a local oscillator in microwave down-conversion and frequency-conversion equipment. The separate charge-pump supply supports an extended tuning range for a voltage-controlled oscillator. Designers should center the loop bandwidth on the required channel spacing and verify phase-noise performance with the actual reference frequency, integer-N division ratio, and loop-filter component values.
推薦
Precision Test Instrumentation
ADF4213BRU-REEL can provide a programmable RF reference for laboratory and production-test equipment. Its output range reaches 3 GHz, enabling the same synthesizer architecture to serve multiple instrument bands. For accurate measurements, the reference oscillator should have low phase noise, and the loop filter should be recalculated whenever the output frequency or required lock time changes rather than reusing settings from another channel.
推薦
Industrial Frequency Generator
The ADF4213BRU-REEL fits industrial frequency-generation modules that require a stable, tunable clock without a separate RF oscillator. Its 2.7 V to 5.5 V operating range supports embedded control-system rails, while the 20-TSSOP package simplifies compact board assembly. Industrial designs should account for temperature drift, reference quality, supply variation, and worst-case lock behavior across the complete operating range.
推薦
Clock Multiplier Module
ADF4213BRU-REEL can multiply a low-frequency reference into an RF clock by using its programmable feedback divider and phase-locked loop. This is useful in modular clock-distribution systems where several instruments need a common phase-coherent signal. The design must preserve a low-noise reference path, use the recommended loop-filter topology, and account for integer-N spur behavior at the final output frequency.
推薦
Communication IF Signal Path
ADF4213BRU-REEL is suitable for generating local oscillator or intermediate-frequency clocks in communication receivers and transmitters. Its CMOS clock output and differential phase-detector interface provide the fundamental building blocks for a phase-locked signal chain. The main trade-off is the integer-N architecture, where a high division ratio can increase in-band phase noise, so reference selection and loop design remain critical.
推薦
推薦產品摘要
工程參考資料,適用於 ADF4213BRU-REEL — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADF4216BRU-REEL | ADF4216BRUZ-RL | ADF4212LBRUZ-RL | ADF4113BRU-REEL | ADF4112BCP-REEL |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Terminal Count | 20 | 20 | 20 | 20 | 20 | 20 |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
主要差異化特點
- Higher maximum synthesis frequency than the documented ADF4212-class alternative (對比ADF4212LBRUZ-RL)
- Lower maximum frequency than the ADF4113 alternative (對比ADF4113BRU-REEL)
- Documented 20-TSSOP terminal and package consistency (對比ADF4216BRU-REEL)
設計說明
Decouple the 2.7 V to 5.5 V supply close to the relevant device pins and connect the exposed return network to a low-impedance ground plane. The separate VP charge-pump rail permits an extended tuning voltage, so its allowable range must be checked independently from the main analog supply. Keep the charge-pump connection short and isolate it from sensitive reference and feedback traces.
Use the manufacturer application circuit as the baseline for the reference, phase-detector, feedback, charge-pump, and loop-filter layout. Route high-frequency nodes with short connections and keep the feedback path away from switching and charge-pump nodes. A ground plane is preferable to fragmented return paths because PLL phase-noise performance is sensitive to supply and ground impedance.
The ADF4213BRU-REEL is an integer-N PLL, so reference jitter, division ratio, and loop bandwidth strongly affect output phase noise. Calculate the loop filter for the actual reference and output frequencies, preserve the recommended charge-pump current and output-divider topology, and verify acquisition and lock behavior across temperature and supply tolerance before production release.
合規資訊
The device is identified as industrial-grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.