Analog Devices

MAX3243CAI+G1Z - 3/5 RS-232 Transceiver | Analog Devices

MPN: MAX3243CAI+G1Z ✓ 啟用中
3 V to 5.5 V Vdss 1 uA Id 28-pin SSOP Package
MOQ: 1 |

MAX3243CAI+G1Z 概覽

Analog Devices MAX3243CAI+G1Z is a 3-driver/5-receiver RS-232 interface transceiver designed for single-supply operation from 3 V to 5.5 V. It is offered in a 28-pin SSOP package and includes AutoShutdown power management, which reduces supply current to 1 uA when the receivers do not detect a valid signal level. The device also provides complementary always-active receiver channels for external monitoring and supports data rates up to 250 kbps.

An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX3243 belongs to the broader interface IC hierarchy, where line drivers and receivers bridge modern digital systems with older RS-232 equipment. Its multi-channel arrangement supports equipment needing more drivers or receivers than a simple two-channel RS-232 implementation.

The MAX3243 family includes integrated charge-pump circuitry for level translation, allowing operation from a single low-voltage supply rather than the traditional positive and negative RS-232 supplies. Low-power operation is important in portable equipment, industrial control systems, and instrument panels where an idle RS-232 port should not consume significant power. AutoShutdown provides automatic supply reduction when valid receiver activity is absent, supporting efficient power management without requiring a dedicated GPIO control signal.

The MAX3243 is suitable for industrial control equipment, test and measurement instruments, data acquisition systems, security equipment, and service interfaces. Its always-active receiver channels can monitor external RS-232 activity even while the principal receiver channels are shut down, which is useful for detecting connection or activity status. The 28-pin SSOP package also supports compact board layouts in legacy and industrial communication products.

When designing around the MAX3243CAI+G1Z, verify the 3 V to 5.5 V supply range, connector protection requirements, and the voltage levels present at each interface. RS-232 is a single-ended, unbalanced standard, so cable routing and grounding can affect signal integrity. Keep connector-side transient protection close to the connector and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. AutoShutdown behavior should also be checked against the system’s expected idle state and remote-device signaling.

This page combines the family-level electrical characteristics, package information, sourcing context, drop-in alternatives, and practical RS-232 design guidance to support component selection and PCB implementation.

直接替換替代品,適用於 MAX3243CAI+G1Z — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MAX3243CAI+G1Z (相同外形與佔位) — 差異在於 ESD Protection, Product Type, Maximum Data Rate, Package, Supply Voltage Range.

Analog Devices
ESD Protection: ±15kV HBM
Product Type: RS-232 line driver and receiver transceiver
Maximum Data Rate: 250kbps
比較對象 MAX3243CAI+G1Z →
Analog Devices
ESD Protection: ±15kV
Product Type: RS-232 transceiver
Maximum Data Rate: 250kbps
比較對象 MAX3243CAI+G1Z →

MAX3243CAI+

✅ 直接替換
📦 28-pin SSOP
Base lead-free ordering code retains the same MAX3243 CAI 28-pin SSOP configuration; only the G1Z assembly suffix differs.

📋 參考替代品(不在目錄中)

MAX3243EEUI+T

✅ 直接替換
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 drivers · 5 receivers · Full duplex · ±15kV · 1µA

聯絡詢價

查看資料表 →

MAX3243EAI+T

✅ 直接替換 ⚠️ 規格未經驗證
📦 28-pin SSOP
E-grade family ordering code; core MAX3243 channel configuration is retained while temperature qualification differs from CAI.

📋 參考替代品(不在目錄中)

MAX3243ECAI+T

✅ 直接替換 ⚠️ 規格未經驗證
Analog Devices
📦 28-pin SSOP
RS-232 line driver and receiver transceiver · 3 drivers · 5 receivers · 3.0V to 5.5V · 250kbps · ±15kV HBM · 1µA · Dual charge pump

聯絡詢價

查看資料表 →

MAX3237CAI+T

✅ 直接替換
📦 28-pin SSOP
Uses a different RS-232 family and channel arrangement; pin compatibility must be confirmed because MAX3237 is not the same 3/5 MAX3243 configuration.

📋 參考替代品(不在目錄中)

MAX3243CAI+G1Z 規格

Product Type RS-232 interface transceiver
Driver Count 3 drivers
Receiver Count 5 receivers
Supply Voltage Range 3 V to 5.5 V
AutoShutdown Supply Current 1 uA
Maximum Data Rate 250 kbps
ESD Protection +/-15 kV
Always-Active Receiver Channels 1 complementary receiver
封裝 28-pin SSOP
安裝類型 Surface mount
Supply Type Single supply
Transceiver Configuration 3/5 full RS-232

MAX3243CAI+G1Z 28-pin ssop 腳位配置指南

MAX3243CAI+G1Z(28-pin ssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX3243CAI+G1Z 的 28-pin ssop 封裝腳位圖

無詳細腳位定義資料: MAX3243CAI+G1Z.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX3243CAI+G1Z 適用於 6 應用s: Industrial Control Interfaces, Test and Measurement Equipment, Data Acquisition Systems, Security and Access Equipment, Portable Service and Diagnostic Tools, Embedded Service and Configuration Ports.

🏭

Industrial Control Interfaces

The MAX3243CAI+G1Z fits legacy RS-232 control ports used by industrial machinery, programmable controllers, and service equipment. Its single 3 V to 5.5 V supply simplifies interface design in systems that no longer provide separate positive and negative RS-232 rails. Three drivers support command or control outputs, while five receivers can accept status, acknowledgment, and sensor information. The 1 uA AutoShutdown state reduces idle consumption when no valid receiver activity is present, which is particularly useful in continuously powered but intermittently connected equipment. Designers should verify logic-level compatibility, line thresholds, and exact receiver functions in the manufacturer pin description table.

🔧

Test and Measurement Equipment

Instrumentation using RS-232 for remote control and status reporting can use the MAX3243CAI+G1Z as a compact multi-channel interface. The 250 kbps maximum data rate suits conventional serial-control protocols, while the three drivers and five receivers provide more channel flexibility than a two-driver transceiver. AutoShutdown helps maintain low power during idle intervals between commands, and the complementary always-active receiver can monitor a connection or external RS-232 activity. The 28-pin SSOP package also supports dense control-panel layouts. Confirm the instrument’s logic thresholds, handshake requirements, and connector-side transient protection against the complete family datasheet.

📊

Data Acquisition Systems

The MAX3243CAI+G1Z can connect a data-acquisition controller to external RS-232 instruments or legacy sensors. Five receiver channels allow multiple status or measurement signals to be monitored, while three driver channels provide command and handshake outputs. Its single-supply operation and integrated charge-pump circuitry eliminate the need for a separate bipolar RS-232 supply generator. When the system spends substantial time waiting for data, AutoShutdown can reduce supply current to 1 uA after the receiver inputs stop showing valid activity. Preserve the intended idle behavior, particularly if a remote device requires a continuously asserted output or uses unusual line levels.

🔐

Security and Access Equipment

Access-control panels, readers, and alarm interfaces that retain an RS-232 diagnostic port can benefit from the MAX3243CAI+G1Z’s combination of multiple drivers, multiple receivers, and automatic low-power operation. The extra receiver channels can monitor door contacts, controller responses, or peripheral status without requiring identical channels. A 3.3 V system can operate the interface from the same supply domain, reducing level-conversion complexity. ESD protection of +/-15 kV adds useful transient immunity at the device level, although the external connector still requires suitable protection and proper chassis grounding. Verify the security equipment’s isolation, surge, and grounding requirements before deployment.

📱

Portable Service and Diagnostic Tools

A portable diagnostic tool powered from a single low-voltage source can use the MAX3243CAI+G1Z to communicate with legacy RS-232 service ports. The device operates from 3 V to 5.5 V, which supports both 3.3 V and 5 V portable designs, and its 1 uA AutoShutdown current helps conserve energy between diagnostic sessions. The always-active complementary receiver can provide a wake or activity indication without keeping every transmitter powered. Designers should evaluate whether AutoShutdown thresholds match the target equipment’s valid RS-232 levels and add cable transients or protection networks where a long external cable creates additional risk.

🖥️

Embedded Service and Configuration Ports

Embedded systems often require a service port that remains compatible with older configuration tools. The MAX3243CAI+G1Z provides three transmit channels and five receive channels within a 28-pin SSOP, allowing command, acknowledgement, and diagnostic signals to share one device. Its integrated charge-pump circuit supports RS-232 levels from one supply, reducing the number of external support components. The additional receiver capacity can support boot-mode detection, status polling, or a permanently monitored external signal. Confirm the host UART logic levels and timing, and follow the manufacturer datasheet for charge-pump capacitor selection and pin placement.

What is the MAX3243CAI+G1Z?
The MAX3243CAI+G1Z is a 3-driver/5-receiver RS-232 interface transceiver from Analog Devices. According to the manufacturer product page, the MAX3243 family provides a 3 V to 5.5 V supply range, operation up to 250 kbps, AutoShutdown, and a 28-pin SSOP option. The CAI package designation identifies the temperature-grade and package combination, while +G1Z identifies the lead-free commercial ordering variant.
Where can I download the MAX3243CAI+G1Z datasheet PDF?
The official MAX3243 datasheet and product information are available from Analog Devices at https://www.analog.com/en/products/max3243.html. The manufacturer page provides the family-level electrical characteristics, package options, pin information, and ordering details. Engineers should use the MAX3243 family datasheet to confirm the CAI package dimensions, temperature limits, pin functions, and electrical limits for MAX3243CAI+G1Z before releasing a PCB design.
Where is the MAX3243CAI+G1Z pinout?
The MAX3243CAI+G1Z pinout is published in the pin-description table and package drawing of the Analog Devices MAX3243 datasheet. The device uses a 28-pin SSOP package, and its three drivers, five receivers, charge-pump capacitors, supply pins, and complementary always-active receiver must be assigned according to that table. Use the manufacturer pin description table rather than inferring connections from another package variant.
What is the operating voltage of MAX3243CAI+G1Z?
The MAX3243CAI+G1Z operates from a single supply of 3 V to 5.5 V. According to the Analog Devices MAX3243 product page and family datasheet information, the integrated charge-pump circuitry generates the bipolar voltage levels required for RS-232 transmission from this single supply. This makes the device suitable for modern 3.3 V and 5 V digital systems while maintaining compatibility with RS-232 interface levels.
What does AutoShutdown do in the MAX3243CAI+G1Z?
AutoShutdown reduces the MAX3243CAI+G1Z supply current to 1 uA when the receiver inputs do not detect a valid signal level. According to the Analog Devices MAX3243 product page, the on-board supply and drivers shut down during this condition. A complementary always-active receiver remains available for external monitoring, allowing a system to detect interface activity while reducing power consumption.
How many RS-232 drivers and receivers does MAX3243CAI+G1Z have?
The MAX3243CAI+G1Z contains three RS-232 drivers and five RS-232 receivers. The Analog Devices product page describes the MAX3243 as a 3-driver/5-receiver device with one complementary always-active receiver for external monitoring. This channel balance supports applications such as multiple driver outputs, multi-receiver buses, and systems that need a continuously active connection-monitoring channel.
What is the maximum data rate of MAX3243CAI+G1Z?
The MAX3243CAI+G1Z supports RS-232 data rates up to 250 kbps. The Analog Devices MAX3243 family description identifies the device as a multichannel RS-232 line driver and receiver, while the 28-pin SSOP ordering information identifies the relevant package option. Verify the complete family datasheet for timing, slew-rate, and receiver bandwidth limits at the selected temperature grade.
What is the best drop-in replacement for MAX3243CAI+G1Z?
The closest documented drop-in candidate is the MAX3243EEUI+T, which appears in a dedicated comparison against MAX3243CAI+G1Z and retains the MAX3243 28-pin SSOP architecture. A replacement should be qualified against supply voltage, channel count, temperature grade, AutoShutdown behavior, and exact pin assignments. Do not treat a MAX3237 device as an automatic substitute because its receiver and driver arrangement differs.
Can MAX3243EEUI+T replace MAX3243CAI+G1Z?
The MAX3243EEUI+T is a potential drop-in replacement for the MAX3243CAI+G1Z because both are MAX3243-family 28-pin SSOP devices, but the E designation indicates a different temperature grade. The dedicated comparison identifies package, mounting, compliance, and series differences. Confirm the required industrial temperature range and compare the exact datasheet ordering tables before substituting it into production.
Is MAX3243CAI+G1Z suitable for industrial equipment?
The MAX3243CAI+G1Z is suitable for RS-232 communication in compact industrial equipment when its specified temperature grade matches the enclosure environment. The Analog Devices family provides an industrial-grade MAX3243EEUI+T option, while the CAI designation belongs to a different grade. Review the manufacturer ordering information, operating-temperature limits, and system thermal requirements before selecting the grade.
When should I choose MAX3243CAI+G1Z over MAX3243EEUI+T?
Choose MAX3243CAI+G1Z when the CAI temperature grade covers the required ambient range and the exact MAX3243 channel and shutdown functions are needed. Choose MAX3243EEUI+T when a broader industrial temperature qualification is required and its ordering designation otherwise matches the PCB and system requirements. Both use the same MAX3243 28-pin SSOP family, but the grade must match the deployment environment.
Where can I buy MAX3243CAI+G1Z online?
Use the Request a Quote form on this page to request MAX3243CAI+G1Z availability, current commercial terms, and lead time. The exact +G1Z ordering code should be stated on the request to avoid confusion with the base MAX3243CAI or the MAX3243CAI+TG1Z tape-and-reel variant. Stock status and lead time should be confirmed for the exact package and manufacturing code.
What is the price of MAX3243CAI+G1Z?
The current price of MAX3243CAI+G1Z is presented through the Request a Quote form on this page. Quote handling is used because the exact ordering suffix, quantity, delivery schedule, and market conditions affect commercial availability. Submit MAX3243CAI+G1Z as the requested MPN and indicate the required quantity and package format.
What is the lead time and stock status of MAX3243CAI+G1Z?
Current stock status and lead time for MAX3243CAI+G1Z should be confirmed through the Request a Quote form on this page. Specify the exact MPN, annual and prototype quantities, and whether the required form is the +G1Z packaging option. This avoids confusing the requested assembly with the base MAX3243CAI or MAX3243CAI+TG1Z variant.
Is MAX3243CAI+G1Z the same as MAX3237CAI+T?
No. The MAX3243CAI+G1Z is a 3-driver/5-receiver MAX3243-family transceiver, while the MAX3237CAI+T belongs to a different RS-232 transceiver family. Although both appear in a 28-pin SSOP-related comparison, channel behavior, shutdown implementation, and electrical characteristics may differ. Treat MAX3237CAI+T as a redesign candidate unless its complete pin and parameter tables prove every function and threshold are equivalent.
What are the key specifications of MAX3243CAI+G1Z that engineers should know?
The key MAX3243CAI+G1Z specifications are a 3 V to 5.5 V single-supply range, three RS-232 drivers, five receivers, operation up to 250 kbps, 1 uA AutoShutdown supply current, and a 28-pin SSOP package. According to Analog Devices, the family also provides +/-15 kV ESD protection and one complementary always-active receiver. These parameters define the core interface, power-management, and environmental design envelope.
What is the best Analog Devices equivalent for MAX3243CAI+G1Z?
The MAX3243EEUI+T is the strongest documented Analog Devices drop-in candidate because a dedicated comparison identifies it directly against MAX3243CAI+G1Z and both belong to the MAX3243 28-pin SSOP family. The principal decision point is temperature grade. Confirm the exact pinout, channel behavior, AutoShutdown timing, and operating-temperature limits in the manufacturer ordering tables before production substitution.

工程參考資料,適用於 MAX3243CAI+G1Z — 比較、設計指引及合規資訊。

選型指南

Choose MAX3243CAI+G1Z for a compact RS-232 interface that requires three drivers, five receivers, a 3 V to 5.5 V single supply, and automatic shutdown. It is particularly useful when the system needs more channels than a basic RS-232 transceiver or requires an always-active complementary receiver. MAX3243CAI+ is the closest base-ordering alternative when the G1Z assembly suffix is not required. MAX3243EEUI+T is preferable when its E temperature grade better matches the operating environment, while MAX3243EAI+T and MAX3243ECAI+T require similar temperature and ordering checks. MAX3237CAI+T should be selected only after its pinout, channel behavior, AutoShutdown implementation, and electrical thresholds are confirmed to meet the design. In every case, verify the exact suffix, package, temperature range, logic-level compatibility, and connector protection requirements.

與替代品比較

參數 本產品 MAX3243CAI+ MAX3243EEUI+T MAX3243EAI+T MAX3243ECAI+T MAX3237CAI+T
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Transceiver Family MAX3243 MAX3243 MAX3243 MAX3243 MAX3243 MAX3237

主要差異化特點

  • Higher receiver count than a basic two-channel RS-232 interface (對比MAX3237CAI+T)
  • Direct same-family ordering alternative (對比MAX3243EEUI+T)
  • Automatic low-power operation with monitoring capability (對比MAX3237CAI+T)

設計說明

Route the three driver outputs and five receiver inputs according to the manufacturer pin-description table, and place the required charge-pump capacitors close to their designated pins. Keep the RS-232 connector-side protection network close to the connector so surge current is diverted before it reaches the transceiver. Preserve the 28-pin SSOP footprint and avoid changing package or temperature-grade suffix codes during PCB release.

Decouple the 3 V to 5.5 V supply locally with the capacitor values and placement specified by the manufacturer datasheet. Confirm that the host UART operates at a logic level compatible with the MAX3243 input and output thresholds. AutoShutdown can reduce quiescent current to 1 uA, but verify that valid receiver levels and the always-active complementary receiver behave as required during system idle periods.

Do not treat the MAX3243CAI, MAX3243CAI+G1Z, and MAX3243CAI+TG1Z identifiers as interchangeable without checking the order code and packaging suffix. Also avoid assuming that every 28-pin SSOP RS-232 transceiver is interchangeable: MAX3237-family channel assignments and shutdown behavior can differ. Validate pin functions, temperature grade, logic thresholds, and AutoShutdown timing before approving a substitution.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Yes
無鹵
Unknown
衝突礦產
Unknown

The +G1Z ordering suffix denotes a lead-free commercial variant. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

相關搜尋

MAX3243CAI+G1Z datasheet MAX3243CAI+G1Z pinout MAX3243CAI+G1Z datasheet pdf MAX3243CAI+G1Z equivalent MAX3243CAI+G1Z replacement MAX3243CAI+G1Z price MAX3243CAI+G1Z stock MAX3243CAI+G1Z footprint MAX3243CAI+G1Z schematic MAX3243CAI+G1Z vs MAX3243EEUI+T Analog Devices MAX3243CAI+G1Z MAX3243CAI+G1Z application circuit

相關元件與詞彙

Analog Devices MAX3243CAI+G1Z MAX3243CAI+ MAX3243EEUI+T MAX3243EAI+T MAX3243ECAI+T MAX3237CAI+T RS-232 RS-232 transceiver line driver line receiver interface IC semiconductor AutoShutdown single-supply operation charge-pump circuit complementary always-active receiver 3 V to 5.5 V supply 250 kbps 1 uA supply current ESD protection SSOP-28 surface mount industrial control test and measurement
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情