Analog Devices

ADM213EARSZ - 5V 4/5 RS-232 Transceiver | Analog Devices

MPN: ADM213EARSZ ✓ 啟用中
+5 V Vdss 28-pin SSOP Package
MOQ: 1 |

ADM213EARSZ 概覽

The Analog Devices ADM213EARSZ is a single-supply RS-232 and V.28 transceiver with four drivers, five receivers, a 5 V supply input, and a 200 kbps data rate in a 28-pin SSOP package. It combines bidirectional RS-232 interface functions with shutdown and enable control while maintaining two receivers active during shutdown.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into digital logic. The RS-232 transceiver category belongs to the broader interface IC hierarchy, where line drivers and receivers bridge modern digital electronics with older point-to-point serial equipment. The ADM2xx family is intended for EIA-232-E and V.28 communication interfaces, particularly where a single 5 V supply is available.

The ADM213E integrates four drivers and five receivers, giving it more receivers than drivers. It operates from one +5 V supply, supports data rates up to 200 kbps, and uses 0.1 µF charge-pump capacitors according to the manufacturer product information. Its shutdown and enable pins provide power-management flexibility, while two receiver outputs remain active in shutdown for selected monitoring applications.

The ADM213E family is positioned for harsh electrical environments and includes EMC-focused interface protection. The device converts CMOS/TTL-compatible logic to RS-232 levels and performs the inverse conversion on the receive side. Its mixed driver/receiver configuration supports equipment in which multiple status or handshake signals must be monitored but only a smaller number of channels require transmission.

Typical uses include industrial serial controllers, instrumentation equipment, point-to-point data links, and legacy peripheral interfaces. The five receiver channels are useful for reading multiple control or status lines, while four drivers cover common RS-232 transmit assignments. In a shutdown sequence, selected receive paths can continue monitoring the bus, reducing dependence on complete power removal.

PCB design should follow the manufacturer pin and capacitor-placement instructions because incorrect charge-pump capacitor connections can prevent correct operation. Keep RS-232 driver outputs away from sensitive low-level analog traces, provide an uninterrupted ground return, and avoid long unprotected branches that increase capacitive loading on the cable.

This page combines device specifications, source-backed commercial guidance, drop-in alternatives, comparison parameters, and practical PCB and power-management notes. It also identifies where pin-level and certification details require consultation of the current Analog Devices documentation before layout release.

直接替換替代品,適用於 ADM213EARSZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: ADM213EARSZ (相同外形與佔位) — 差異在於 Package, Interface Standard, Product Type, Enable Control, Shutdown Control.

Analog Devices
Package: 28-pin SOIC
Product Type: RS-232 and V.28 interface transceiver
比較對象 ADM213EARSZ →
Analog Devices
Package: 28-pin SOIC, 0.295 inch (7.50 mm) width
Interface Standard: RS-232 / EIA-232-E / V.28
比較對象 ADM213EARSZ →
Analog Devices
Package: 28-pin SOIC
Interface Standard: EIA-232E and CCITT V.28
Product Type: RS-232/V.28 line transceiver
比較對象 ADM213EARSZ →

ADM213EARZ

✅ 直接替換
Analog Devices
📦 28-pin SSOP
RS-232/V.28 line transceiver · 4.5 V to 5.5 V · +5 V · 230 kbps · 4 · 5 · 2 · ±15 kV

聯絡詢價

查看資料表 →

ADM213EARU

✅ 直接替換
📦 28-pin SSOP
Closely related ADM213E configuration with matching +5 V, 4-driver, 5-receiver, and 200 kbps ratings; 0% key-rating difference

📋 參考替代品(不在目錄中)

TRS213

✅ 直接替換
📦 28-pin SSOP
Same reported pinout and package with minor differences in no-load normal-operation and shutdown power consumption; 90% key-rating match

📋 參考替代品(不在目錄中)

ADM213EARSZ 規格

Product Type RS-232 / V.28 transceiver
供應電壓 +5 V
Number of Drivers 4
Number of Receivers 5
資料速率 200 kbps
Charge-Pump Capacitor Value 0.1 µF
Transceiver Configuration 4 drivers / 5 receivers
Shutdown Control Yes
Enable Control Yes
Receivers Active in Shutdown 2
Interface Standard RS-232 / V.28
封裝 28-pin SSOP
安裝類型 Surface mount
RoHS 狀態 Compliant
EMC Compliance EU EMC directive compliant

ADM213EARSZ 28-pin ssop 腳位配置指南

ADM213EARSZ(28-pin ssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

ADM213EARSZ 的 28-pin ssop 封裝腳位圖

無詳細腳位定義資料: ADM213EARSZ.

請參閱 資料表 以查看完整腳位配置。

典型應用

ADM213EARSZ 適用於 6 應用s: Industrial RS-232 Controllers, Point-to-Point Serial Links, Instrumentation and Test Equipment, Legacy Peripheral Interfaces, Power-Managed Serial Ports, Serial Port Expansion.

🏭

Industrial RS-232 Controllers

The ADM213EARSZ fits industrial controller boards that communicate with legacy equipment through a +5 V RS-232 port. Four drivers support common transmit channels, while five receivers allow additional command acknowledgments, interlocks, or status lines to be monitored. Operation up to 200 kbps supports control and diagnostic traffic rather than only very low-speed terminal links. Shutdown and enable control help the controller reduce power when the external bus is inactive, while two receivers can remain active for monitoring. The robust interface positioning and EMC compliance are useful in electrically demanding industrial environments, subject to normal signal-integrity and ESD layout practices.

🌐

Point-to-Point Serial Links

A point-to-point link can use the ADM213EARSZ when both endpoints require a single +5 V interface rather than a separate ±12 V supply. Its four drivers and five receivers provide enough channels for data, handshake, and status signaling, and the 200 kbps maximum rate is suitable for command and control traffic. The internally managed charge-pump arrangement simplifies the power-supply requirement compared with discrete RS-232 designs. Enable and shutdown inputs permit the link to enter a controlled low-power state. Cable routing and grounding remain important because the transceiver solves logic interfacing, not the transmission loss, capacitance, or protection requirements of the external cable.

🔧

Instrumentation and Test Equipment

The ADM213EARSZ is appropriate for test and measurement equipment that retains RS-232 for instrument control and legacy peripheral communication. The +5 V operating supply integrates naturally with contemporary control logic, while the 200 kbps rate supports short command and response exchanges. Five receiver inputs can collect equipment-ready, interlock, or fault signals alongside four transmitted channels. Selectively active receivers in shutdown permit important remote status lines to remain observable. Designers should still isolate external cables appropriately and follow the manufacturer pin and capacitor-placement instructions to maintain deterministic interface behavior.

🖥️

Legacy Peripheral Interfaces

The ADM213EARSZ bridges modern CMOS logic and legacy RS-232 peripherals without requiring a separate 12 V interface supply. This is useful in service equipment, configuration tools, and adapters that must communicate with older printers, scanners, or test fixtures. Four drivers cover the typical data and control transmissions, while the extra receiver supports bus monitoring or a second handshake signal. The 200 kbps capability accommodates moderate-rate configuration traffic. The interface should be placed near the connector, with a low-impedance ground path and appropriately routed protection, because cable transients can propagate through the transceiver regardless of its internal logic functionality.

⚡

Power-Managed Serial Ports

The ADM213EARSZ suits power-managed serial ports where a system needs to disable most interface functions without losing access to selected status signals. Its shutdown control reduces activity in unused transceiver sections, and the enable input supports controlled operating-state transitions. Two receiver paths remain active during shutdown, enabling a host to monitor a remote system or detect a persistent fault condition. This arrangement can simplify supervisory logic compared with powering an entire RS-232 transceiver continuously. The exact active channels and control polarity must be implemented from the manufacturer pin table, and supply sequencing should prevent uncontrolled signal states at the external connector.

🧩

Serial Port Expansion

The ADM213EARSZ can expand a controller's available RS-232 channels when one transceiver does not provide enough driver and receiver paths. Four drivers and five receivers allow a system builder to combine data, handshake, and peripheral-status functions in one 28-pin SSOP device. The 200 kbps limit is suitable for command-oriented links and does not require a high-speed differential interface. Its +5 V operation helps simplify power planning in embedded control boards. Board designers should allocate connector-side protection and maintain short return paths because adding more logical channels does not eliminate cable charging, ground-loop, or transient-voltage constraints.

推薦產品摘要

ADM213EARZ Analog Devices 用於: Industrial RS-232 Controllers, Instrumentation and Test Equipment, Power-Managed Serial Ports, Serial Port Expansion MAX3221EIPWR Texas Instruments 用於: Industrial RS-232 Controllers, Instrumentation and Test Equipment, Power-Managed Serial Ports TRS213 RS-232 transceiver reported to use the same pinout and package 用於: Point-to-Point Serial Links, Legacy Peripheral Interfaces, Serial Port Expansion ADM213EARU Closely related 4-driver, 5-receiver interface option 用於: Point-to-Point Serial Links, Legacy Peripheral Interfaces
What is the ADM213EARSZ?
The ADM213EARSZ is a 28-pin SSOP RS-232 transceiver from Analog Devices with four drivers, five receivers, shutdown and enable control, and two receivers active during shutdown. According to the Analog Devices ADM213E product information, it operates from a single +5 V supply and supports communication rates up to 200 kbps, making it suitable for legacy serial interfaces requiring mixed transmit and monitoring channels.
What are the key specifications of ADM213EARSZ that engineers should know?
The ADM213EARSZ combines four RS-232 drivers, five RS-232 receivers, a single +5 V supply, and a maximum 200 kbps data rate in a 28-pin SSOP package. Analog Devices identifies the device as an EIA-232-E and V.28 interface device with shutdown and enable pins, plus two receiver paths that remain active in shutdown. Its 0.1 µF charge-pump capacitors support on-chip voltage conversion for RS-232 line-level operation.
Where can I download the ADM213EARSZ datasheet PDF?
The official Analog Devices ADM213E product page is the appropriate starting point for the ADM213EARSZ datasheet and supporting documentation. It describes the device as a +5 V RS-232 and V.28 interface with four drivers, five receivers, shutdown, enable, and two receivers active during shutdown. Use the pin-description and ordering tables in that documentation before assigning PCB tracks or approving production.
Where can I find the ADM213EARSZ pinout?
The ADM213EARSZ pinout is shown in the Analog Devices ADM213E datasheet under the pin-description and package-drawing sections. The component uses a 28-pin SSOP, but the exact signal names, charge-pump capacitor connections, and exposed logic inputs must be taken from the manufacturer diagram. Use that pin-description table when assigning PCB tracks rather than relying on a generic SSOP footprint.
What is the ADM213EARSZ supply voltage and data rate?
The ADM213EARSZ operates from a single +5 V supply and supports RS-232 communication rates up to 200 kbps. Analog Devices states that the ADM2xx family is intended for EIA-232-E and V.28 interfaces, especially where 12 V is unavailable. The operating specification therefore supports conventional single-supply CMOS systems while avoiding the need for a separate ±12 V interface rail.
Can ADM213EARSZ operate in shutdown and still monitor the interface?
Yes, the ADM213EARSZ includes two receivers that remain active while the device is in shutdown. Analog Devices identifies the ADM213 as a low-power shutdown RS-232 interface with shutdown and enable pins and two receivers active in shutdown. This arrangement can preserve selected status or fault inputs while disabling the remaining transceiver functions to reduce system power consumption.
What can replace the ADM213EARSZ?
The closest documented replacement candidates are the ADM213EARZ, ADM213EARU, and TRS213, although package and pin details must be confirmed before substitution. The ADM213EARZ is described as a lead-free variant, while the comparison information for the ADM213EARU identifies a closely related device. A separate comparison states that the ADM213 and TRS213 use the same pinout and package.
Is the ADM213EARSZ the same as the ADM213EARZ?
The ADM213EARSZ and ADM213EARZ are closely related ADM213E devices, but the ordering suffix identifies different package or ordering configurations. Cross-reference information describes the ADM213EARZ as the lead-free package variant of the ADM213EAR and identifies the ADM213EARSZ as suitable for functional replacement subject to confirmation. Verify the package drawing, pinout, and ordering code before treating them as an unqualified drop-in replacement.
What is the best Analog Devices equivalent for the ADM213EARSZ?
The ADM213EARZ is the most closely related Analog Devices candidate identified for the ADM213EARSZ, and the ADM213EARU is another close family member. Both are documented as closely related RS-232 interface devices, but the ADM213EARU comparison points to a different package option. Confirm that the selected suffix provides the required 28-pin SSOP footprint and identical pin functions before using either as a replacement.
ADM213EARSZ vs ADM213EARU - which is better for a new design?
The ADM213EARSZ is preferable when the new design specifically requires the 28-pin SSOP configuration identified for this ordering code. The ADM213EARU is a closely related ADM213E device but is presented in comparison material as a different package option. The decision should therefore follow the PCB footprint and exact pin-description table, not only the shared four-driver, five-receiver RS-232 architecture.
When should I choose ADM213EARSZ over a TRS213?
Choose the ADM213EARSZ when a 28-pin SSOP implementation, Analog Devices sourcing, and the documented shutdown behavior with two active receivers are priorities. A TRS213 comparison reports the same pinout and package, making it a potential replacement, while also noting a minor difference in no-load and shutdown power consumption. Review the latest power and timing tables if lowest quiescent consumption is decisive.
Is ADM213EARSZ suitable for industrial serial equipment?
The ADM213EARSZ is suitable for industrial and instrumentation interfaces that use a +5 V supply and RS-232 or V.28 links. Analog Devices describes the ADM213E family as robust, intended for harsh electrical environments, and compliant with the EU EMC directive. The device supports data rates up to 200 kbps and provides shutdown, enable, and selectively active receivers for power-managed serial equipment.
Where to buy ADM213EARSZ online?
Use the Request a Quote form on this page to request ADM213EARSZ availability, current commercial terms, and lead time. The form allows the exact ordering code and target quantity to be reviewed without inserting a potentially stale listing figure. Confirm the package suffix, delivery condition, and quantity requirements when submitting the request.
What is the price of ADM213EARSZ?
The current commercial price for ADM213EARSZ should be obtained through the Request a Quote form on this page because pricing depends on quantity, package condition, and market availability. Enter the required order quantity and confirm that the request refers to the ADM213EARSZ ordering code rather than a reel-format or customer-specific labeling variant.
What is the lead time for ADM213EARSZ and is it in stock?
Request the current ADM213EARSZ stock position and lead time through the Request a Quote form on this page. The Analog Devices product page identifies the ADM213 family as production, but current channel inventory can vary by package and order quantity. State the required delivery date and packaging format so the supplier can confirm an actionable schedule.
Does ADM213EARSZ meet RoHS and EMC requirements?
The ADM213EARSZ is identified as a RoHS-compliant, lead-free package variant, and Analog Devices states that the ADM213E family complies with the EU EMC directive. REACH, halogen-free status, AEC-Q100 qualification, and conflict-minerals status are not established by the manufacturer information available for this page. Use the current compliance declaration or supplier documentation when formal certification is required.

工程參考資料,適用於 ADM213EARSZ — 比較、設計指引及合規資訊。

選型指南

Choose the ADM213EARSZ when the PCB requires the 28-pin SSOP ADM213E configuration, a single +5 V supply, four RS-232 drivers, five receivers, and the ability to keep two receiver paths active during shutdown. It is especially useful in industrial controllers and instrumentation where status monitoring must continue while most transceiver functions are disabled. The ADM213EARZ is the closest same-manufacturer option when its ordering and package details match the target board. The ADM213EARU is another closely related family member, but verify its package suffix and exact pin map before release. The TRS213 is a cross-brand candidate described as having the same pinout and package; consider it when supply-chain preference outweighs minor no-load and shutdown power differences. Do not use the ADM211EAR as a drop-in replacement because its capacitor and pin-function arrangement differs.

與替代品比較

參數 本產品 ADM213EARZ ADM213EARU TRS213
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices Analog Devices Texas Instruments
Product Type RS-232 / V.28 transceiver RS-232 / V.28 transceiver RS-232 / V.28 transceiver RS-232 transceiver
Shutdown and Enable Control Shutdown and enable pins Shutdown and enable pins Shutdown and enable pins Shutdown and enable pins

主要差異化特點

  • More receive channels than the ADM213 family requires for basic bidirectional links (對比TRS213)
  • Selectively active monitoring during shutdown (對比ADM213EARU)
  • Single +5 V operation with integrated charge-pump support (對比ADM213EARZ)

設計說明

Place the two 0.1 µF charge-pump capacitors directly between their specified pins and keep the associated traces short. Use the Analog Devices pin-description table as the authoritative assignment map. Maintain a continuous ground reference beneath the SSOP where practical, and route the RS-232 outputs away from clock, precision analog, and high-impedance sensing traces to reduce capacitive and inductive coupling.

Decouple the +5 V supply close to the device with the capacitance recommended by the manufacturer and follow the exact component values and placement shown in the datasheet application circuit. Treat enable and shutdown as sequencing controls rather than ordinary high-speed signals. Ensure that externally driven receiver outputs remain meaningful when the main transceiver section enters shutdown, particularly for supervisory fault-detection functions.

Do not treat ADM213EARZ, ADM213EARU, or TRS213 as an automatic substitution solely because the descriptions mention similar RS-232 functions. Confirm the 28-pin SSOP footprint, exposed-pin mapping, charge-pump connections, shutdown behavior, and receiver count against the specific ordering code. The ADM211EAR family should not be used as a drop-in substitute because comparison information specifically notes different pin functions and external capacitor requirements.

Place the transceiver near the external connector to minimize the distance traveled by high-voltage RS-232 driver signals. Use a direct chassis or board-ground return path rather than routing return current through sensitive signal traces. Provide suitable connector-side transient protection for exposed cables, and keep protection components close to the entry point so surge energy is not carried across the logic section of the board.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
無鉛
Yes
無鹵
Unknown
衝突礦產
Unknown

Cross-reference information identifies the ADM213EARSZ as the RoHS-compliant, lead-free package variant. Analog Devices states that the ADM213E family complies with the EU EMC directive. REACH, AEC-Q100, halogen-free, and conflict-minerals status were not established by the manufacturer information available for this page.

相關搜尋

adm213 datasheet adm213earsz reel ADM213EARSZ datasheet ADM213EARSZ datasheet pdf ADM213EARSZ pinout ADM213EARSZ 28-SSOP ADM213EARSZ equivalent ADM213EARSZ replacement ADM213EARSZ vs ADM213EARU ADM213EARSZ vs TRS213 ADM213EARSZ RS-232 transceiver ADM213EARSZ price ADM213EARSZ stock Analog Devices ADM213EARSZ ADM213EARSZ application circuit

相關元件與詞彙

Analog Devices ADM213EARSZ ADM213EARZ ADM213EARU TRS213 Texas Instruments MAX3221EIPWR RS-232 V.28 EIA-232-E RS-232 transceiver line driver line receiver interface IC CMOS 5 V power supply 200 kbps charge-pump capacitor 0.1 µF capacitor 28-pin SSOP SSOP family surface-mount package shutdown control enable control RoHS EU EMC directive
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情