Analog Devices

ADM231LJRZ - 5V Dual RS-232 Transceiver | Analog Devices

MPN: ADM231LJRZ ✗ 停產
+5 V Vdss 16-pin wide SOIC Package
MOQ: 1 |

ADM231LJRZ 概覽

The Analog Devices ADM231LJRZ is an obsolete, low-power, +5 V CMOS RS-232 transceiver with 2 drivers and 2 receivers in a 16-pin wide SOIC package. The device supports RS-232 data rates up to 100 kbps under worst-case loading and operates from a single 5 V supply. Its four-channel arrangement supports compact two-direction serial interfaces without requiring separate driver and receiver ICs.

An RS-232 transceiver is an interface IC that converts between logic-level signals and the bipolar voltage levels used by RS-232 equipment. It belongs to the interface IC category and combines line drivers, line receivers, and charge-pump voltage support into one integrated component. The ADM231L is specifically positioned for low-power, +5 V systems where the RS-232 port must conserve board area and supply current.

The principal features are a single 5 V supply, two RS-232 drivers, two RS-232 receivers, CMOS-compatible logic inputs, and operation at data rates up to 100 kbps. The 16-pin SOIC package supports conventional surface-mount assembly and provides enough pins for power, ground, driver outputs, receiver inputs, and control functions. The manufacturer identifies the ADM231L family as obsolete, so new designs should account for lifecycle risk rather than treating it as an unrestricted new-production choice.

The multi-channel architecture allows one IC to serve a port containing both transmit and receive paths. This can reduce component count compared with using separate single-channel RS-232 devices. The 100 kbps capability is suitable for data acquisition, industrial control, instrumentation, and legacy peripheral connections where moderate-speed serial transfer is sufficient, although it does not target high-speed differential serial protocols.

Typical uses include industrial serial controllers, test and measurement equipment, point-of-sale systems, data-logging equipment, and embedded systems that retain an RS-232 interface. In each case, the two transmitters can carry outbound control or measurement data, while the two receivers can accept status information or commands from a remote terminal.

Design the surrounding interface carefully because RS-232 is a single-ended, bipolar system rather than a logic-level UART connection. Check voltage levels, grounding, cable length, and protection requirements in the application circuit. Allow suitable bypass capacitance at the +5 V supply pins and route interface traces away from noisy switching nodes to reduce data errors.

This page combines the manufacturer lifecycle information with package details, technical comparisons, and practical integration guidance. It also identifies when a current interface IC or a same-family replacement should be considered, helping engineers evaluate ADM231LJRZ against modern design requirements without overlooking its obsolete status.

直接替換替代品,適用於 ADM231LJRZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

ADM231LARZ

✅ 直接替換 ⚠️ 規格未經驗證
Analog Devices
📦 16-pin wide SOIC
RS-232 transceiver · +5 V · 5.5 V · 2 · 2 · EIA-232-E · CMOS · Low power

聯絡詢價

查看資料表 →

ADM231AARZ

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-pin wide SOIC
Same 16-pin SOIC footprint and +5 V RS-232 interface; the AARZ temperature grade differs from JRZ by up to 20°C at the cold limit

📋 參考替代品(不在目錄中)

ADM232LARZ

✅ 直接替換
📦 16-pin wide SOIC
Same 16-pin SOIC footprint and +5 V operation; the ADM232L adds family-specific auxiliary behavior while retaining 2 drivers and 2 receivers

📋 參考替代品(不在目錄中)

ADM232AARZ

✅ 直接替換
📦 16-pin wide SOIC
Same 16-pin SOIC footprint and +5 V interface; compared with JRZ, the AARZ temperature range extends approximately 40°C colder

📋 參考替代品(不在目錄中)

ADM237LJRZ

✅ 直接替換
📦 16-pin wide SOIC
Same 16-pin SOIC footprint and +5 V low-power family; ADM237L adds shutdown-control behavior while retaining a 2-driver, 2-receiver interface

📋 參考替代品(不在目錄中)

ADM231LJRZ 規格

Product Type Low-power RS-232 transceiver
供應電壓 +5 V
Driver Channels 2 channels
Receiver Channels 2 channels
Maximum Data Rate 100 kbps
封裝 16-pin wide SOIC
腳位數 16 pins
安裝類型 Surface mount
Technology CMOS
Power Class Low power
生命週期狀態 Obsolete

ADM231LJRZ 16-pin wide soic 腳位配置指南

ADM231LJRZ(16-pin wide soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

ADM231LJRZ 的 16-pin wide soic 封裝腳位圖

無詳細腳位定義資料: ADM231LJRZ.

請參閱 資料表 以查看完整腳位配置。

典型應用

ADM231LJRZ 適用於 6 應用s: Industrial Serial Controllers, Test and Measurement Equipment, Point-of-Sale Terminals, Data Loggers, Embedded Peripheral Interfaces, Legacy Equipment Repair.

🏭

Industrial Serial Controllers

The ADM231LJRZ fits legacy industrial controllers that exchange commands and status through an RS-232 port. Its 2 drivers and 2 receivers provide both transmit and receive paths on one +5 V IC, while the 100 kbps capability is suitable for moderate-speed command traffic and supervisory data. The 16-pin wide SOIC package simplifies repair and redesign work on boards that already use that footprint. Because the ADM231L family is obsolete, engineers should confirm temperature limits and pin functions in the Rev. C data sheet before releasing a new production design.

🔧

Test and Measurement Equipment

Instrumentation systems can use the ADM231LJRZ to connect a controller or data-acquisition engine to a legacy RS-232 instrument. Two receivers allow status or measurement commands to enter the controller, while two drivers support outbound configuration and results. Its 100 kbps limit is appropriate for many serial measurement protocols and operator interfaces, and the single +5 V supply integrates cleanly with digital control hardware. Engineers should use the manufacturer data sheet for capacitor values, logic thresholds, and the exact receiver-enable arrangement rather than infer them from a generic RS-232 footprint.

🖥️

Point-of-Sale Terminals

The ADM231LJRZ is applicable to legacy point-of-sale equipment where a compact +5 V serial port connects a terminal, printer, or customer-display controller. Four channels allow bidirectional communication without separate line-driver and receiver packages, reducing PCB component count. The device's 100 kbps capability suits short control and transaction-status messages rather than high-volume data transfer. For maintained retail systems, preserve the original 16-pin layout and verify signal levels, grounding, and cable protection. For new terminals, evaluate the lifecycle status before approving an obsolete transceiver for another product cycle.

🧩

Data Loggers

A data logger can use the ADM231LJRZ to communicate configuration commands and captured records with a host computer over RS-232. The two transmitters support outbound commands or status, and the two receivers accept host acknowledgments or setup data. At up to 100 kbps, the interface is suitable for many short-record control applications, provided the protocol does not require faster throughput. The +5 V CMOS implementation can simplify integration with digital logic, but field deployments should also address transient protection, ground potential differences, and long cable runs according to the application circuit in the manufacturer data sheet.

📱

Embedded Peripheral Interfaces

The ADM231LJRZ can connect an embedded controller to legacy printers, programmers, scanners, or service ports that use RS-232. Its combined driver and receiver arrangement supports full-duplex communication while preserving a conventional 16-pin wide SOIC footprint on existing boards. The 100 kbps rate is sufficient for many control-oriented peripheral protocols. Logic-side signals use the device's CMOS interface, while the cable side requires correct RS-232 levels and grounding. Validate the connector, protection network, and firmware framing in the target system because logical compatibility alone does not guarantee protocol compatibility.

🔧

Legacy Equipment Repair

The ADM231LJRZ is especially relevant to maintenance and repair of equipment designed around the original 16-pin ADM231L footprint. Retaining the known +5 V supply architecture, 2-driver and 2-receiver arrangement, and 100 kbps interface avoids board redesign when replacing a failed IC in a qualified assembly. During repair, inspect the original device markings, verify that no shutdown or enable functions were added by later board revisions, and compare the replacement part's pin description with the installed footprint. Obsolete-product handling should include traceability, visual inspection, and electrical testing before the board returns to service.

What is the ADM231LJRZ?
The ADM231LJRZ is an Analog Devices low-power, +5 V CMOS RS-232 transceiver containing 2 drivers and 2 receivers in a 16-pin wide SOIC package. According to the Analog Devices ADM231L data sheet, Rev. C, it supports RS-232 data rates up to 100 kbps. The manufacturer lists the ADM231L family as obsolete, so engineers should verify lifecycle requirements and consider a current replacement for new designs.
What are the key specifications of ADM231LJRZ that engineers should know?
The ADM231LJRZ combines a single +5 V supply, 2 RS-232 drivers, 2 RS-232 receivers, CMOS technology, and operation up to 100 kbps in a 16-pin wide SOIC package. According to the Analog Devices ADM231L data sheet, Rev. C, it is a low-power RS-232 transceiver intended for compact serial interfaces. Its principal engineering trade-off is the combination of four channels in one package versus the obsolete product lifecycle.
Where can I download the ADM231LJRZ datasheet PDF?
The ADM231LJRZ data sheet can be downloaded from the official Analog Devices technical-documentation link on this page. The document is the combined data sheet for the ADM231L, ADM232L, ADM233L, ADM234L, ADM236L, ADM237L, ADM238L, ADM239L, and ADM241L family and is identified as Rev. C. Use the pin-description and electrical-characteristics tables when assigning PCB functions and verifying operating limits.
Where can I find the ADM231LJRZ pinout?
The ADM231LJRZ pinout is found in the Pin Configuration section of the Analog Devices ADM231L family data sheet, Rev. C. The device uses a 16-pin wide SOIC package with numbered pins for the +5 V supply, ground, receiver outputs, driver inputs, and RS-232 line connections. Use that table together with the package drawing when assigning tracks and checking exposed lead orientation on the PCB.
How does ADM231LJRZ differ from ADM232LARZ?
The ADM231LJRZ and ADM232LARZ are both Analog Devices low-power, +5 V RS-232 transceiver families, but they are distinct device variants rather than identical MPNs. The ADM231LJRZ is specified as a 2-driver, 2-receiver, 16-pin SOIC device, while detailed ADM232LARZ electrical and pin-function differences should be checked in its data sheet. Both remain within the same broader ADM23x low-power transceiver family.
Can ADM237LJRZ replace ADM231LJRZ?
The ADM237LJRZ should not be treated as an automatic drop-in replacement for the ADM231LJRZ without a complete pin and electrical review. Both belong to the Analog Devices low-power RS-232 family and are identified in the same family data sheet, but the ADM237L includes additional power-control functionality that can change the pin requirements. Compare supply current, shutdown behavior, driver and receiver assignments, and package dimensions before substitution.
What is the best drop-in replacement for ADM231LJRZ?
The closest legacy replacement must preserve the 16-pin SOIC footprint, +5 V supply, 2-driver and 2-receiver arrangement, and required RS-232 electrical characteristics. The ADM231LARZ and ADM232LARZ are useful same-family candidates to review because they remain in the Analog Devices ADM23x ecosystem, but temperature grade, shutdown behavior, and pin functions must be checked. For a new design, a current RS-232 transceiver should be evaluated rather than assuming every family member is interchangeable.
When should I choose ADM231LJRZ over another RS-232 transceiver?
Choose the ADM231LJRZ only when an existing design specifically requires its +5 V supply, 2-driver and 2-receiver arrangement, 16-pin SOIC footprint, and up-to-100-kbps operation. It is appropriate for maintaining a qualified legacy assembly or repairing an installed board. For new equipment, choose a current transceiver with a suitable temperature rating, protection level, power mode, and verified lifecycle status rather than starting with an obsolete part.
Is ADM231LJRZ suitable for industrial control equipment?
The ADM231LJRZ can be used in legacy industrial control equipment when its specified electrical limits and operating-temperature range match the installation. Its +5 V supply, 2 drivers, 2 receivers, and 100 kbps data rate suit moderate-speed control and status links. Because Analog Devices marks the ADM231L family obsolete, confirm the exact temperature grade and obtain the data-sheet limits before approving it for a new industrial design.
How does ADM231LJRZ compare with ADM232AARZ?
The ADM231LJRZ and ADM232AARZ belong to the same Analog Devices ADM23x low-power RS-232 family but have different ordering codes and may differ in temperature grade or auxiliary functions. Both use a +5 V architecture and are intended for multi-channel RS-232 links. Before choosing one, compare the exact pin-description table, shutdown behavior, operating-temperature range, and supply-current specification rather than relying only on the shared package name.
What can replace ADM231LJRZ?
A replacement for the ADM231LJRZ should be a 16-pin SOIC RS-232 transceiver with a +5 V supply, 2 drivers, 2 receivers, and compatible pin functions. ADM231LARZ and ADM232LARZ are same-family options worth checking because they retain the Analog Devices ADM23x design context. A footprint alone is insufficient: verify enable or shutdown pins, receiver enable behavior, electrical levels, and temperature requirements before approving a replacement.
Is ADM231LJRZ the same as ADM232LARZ?
No, ADM231LJRZ and ADM232LARZ are different ordering codes within the Analog Devices ADM23x low-power RS-232 family. The ADM231LJRZ is a 2-driver, 2-receiver, 16-pin wide SOIC device, while the ADM232LARZ is a separate family member whose auxiliary functions must be read from its own data sheet. They may share package and supply architecture, but they are not automatically identical parts.
Where can I buy ADM231LJRZ online?
Use the Request a Quote form on this page to ask about ADM231LJRZ availability, obsolete-part sourcing, lot traceability, and current lead time. Because Analog Devices identifies the ADM231L family as obsolete, a quotation may depend on remaining factory inventory or authorized channel stock rather than routine new production. Provide the exact MPN ADM231LJRZ, quantity, target package, and any date-code or traceability requirement with the request.
What is the price of ADM231LJRZ?
Current pricing for the obsolete ADM231LJRZ depends on remaining supply, quantity, and traceability requirements. Use the Request a Quote form on this page for a current quotation and lead-time confirmation rather than relying on an outdated catalog price. Include the exact ADM231LJRZ ordering code, required quantity, acceptable date code, and inspection requirements so obsolete inventory can be matched to the project.
Is ADM231LJRZ in stock and what is its lead time?
The ADM231LJRZ should be treated as an obsolete part, so stock and lead time require a direct quotation. Use the Request a Quote form on this page with the required quantity and any date-code constraints. Analog Devices identifies the ADM231L family as obsolete; consequently, availability can depend on remaining inventory rather than a normal production schedule, and a firm lead time should be confirmed before scheduling production.

工程參考資料,適用於 ADM231LJRZ — 比較、設計指引及合規資訊。

選型指南

Choose the ADM231LJRZ when maintaining an existing +5 V RS-232 design that specifically uses the 16-pin wide SOIC footprint and requires 2 drivers, 2 receivers, and communication rates up to 100 kbps. Its obsolete lifecycle makes it most appropriate for repair, qualification continuity, or controlled use of remaining inventory rather than unrestricted new-product design. Evaluate ADM231LARZ when the board requires a different temperature grade, and review ADM232LARZ or ADM232AARZ only after confirming their auxiliary-control and pin-function differences. ADM237LJRZ may suit designs that require a shutdown function, but its shutdown pin must be handled correctly. For a new RS-232 interface, compare a current transceiver against the required channel count, supply voltage, data rate, ESD protection, temperature range, and package.

與替代品比較

參數 本產品 ADM231LARZ ADM231AARZ ADM232LARZ ADM232AARZ ADM237LJRZ
Package 16-pin wide SOIC 16-pin wide SOIC 16-pin wide SOIC 16-pin wide SOIC 16-pin wide SOIC 16-pin wide SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Supply Voltage +5 V +5 V +5 V +5 V +5 V +5 V
Driver Count 2 drivers 2 drivers 2 drivers 2 drivers 2 drivers 2 drivers
Receiver Count 2 receivers 2 receivers 2 receivers 2 receivers 2 receivers 2 receivers
Maximum Data Rate 100 kbps 100 kbps 100 kbps 100 kbps 100 kbps 100 kbps
Technology +5 V CMOS +5 V CMOS +5 V CMOS +5 V CMOS +5 V CMOS +5 V CMOS

主要差異化特點

  • Combines four RS-232 line functions in one 16-pin device (對比MAX3221IPWR)
  • Supports a moderate-speed data rate of 100 kbps (對比ADM232LARZ)
  • Uses the established 16-pin wide SOIC footprint (對比ADM237LJRZ)

設計說明

Do not treat every member of the ADM23x family as automatically interchangeable. The ADM231L, ADM232L, and ADM237L can share a 16-pin SOIC format while differing in auxiliary control behavior. Before replacing the ADM231LJRZ, compare the pin-description table, enable or shutdown state, receiver outputs, logic thresholds, and temperature grade. A matching footprint protects the PCB mechanically but does not by itself prove electrical or functional compatibility.

Follow the +5 V connection and bypass recommendations in the manufacturer data sheet when laying out the ADM231LJRZ. Place the required decoupling capacitor close to the supply pin and ground return to suppress logic-side and line-driver supply noise. The RS-232 drivers use charge-pump-generated levels, so inadequate local decoupling can reduce signal integrity even when the external supply voltage is correct.

Keep RS-232 driver outputs away from sensitive receiver inputs and unrelated high-speed logic. Route the connector-side traces directly to the device, maintain the data sheet's ground arrangement, and place any external protection network where it can clamp cable transients without forcing large surge currents through the IC. Check the assembled orientation and lead numbering against the Rev. C pin-configuration drawing before power-up.

The ADM231LJRZ is a low-power interface IC, but its total dissipation still depends on supply voltage, driver loading, and ambient temperature. Check the driver-load conditions and logic-state dissipation in the family data sheet rather than estimating from quiescent current alone. Use normal SOIC copper guidance, preserve airflow around the device, and avoid placing it next to a heat source that elevates the board temperature beyond the selected part's rating.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer product page identifies the ADM231L family as obsolete but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for this ordering code.

相關搜尋

ADM231LJRZ datasheet ADM231LJRZ datasheet pdf ADM231LJRZ pinout ADM231LJRZ replacement ADM231LJRZ equivalent ADM231LJRZ cross reference ADM231LJRZ SOIC-16 pinout Analog Devices ADM231LJRZ ADM231LJRZ 100 kbps RS-232 ADM231LJRZ 5V dual transceiver ADM231LJRZ vs ADM232LARZ ADM231LJRZ price ADM231LJRZ stock ADM231LJRZ industrial RS-232 ADM231LJRZ obsolete replacement

相關元件與詞彙

Analog Devices ADM231LJRZ ADM231LARZ ADM231AARZ ADM232LARZ ADM232AARZ ADM237LJRZ MAX3221IPWR TJA1057GTK/3Z RS-232 EIA-232 RS-232 transceiver line driver line receiver interface IC CMOS low-power IC single +5 V supply 100 kbps 16-pin wide SOIC SOIC family surface-mount package industrial control equipment test and measurement equipment point-of-sale terminal
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情