ADS1271IPW - 24-Bit 105kSPS Delta-Sigma ADC | Texas Instruments | Industrial Measurement
MPN: ADS1271IPW ✓ 啟用中ADS1271IPW 概覽
An ADC is the analog-to-digital converter, the device that turns a continuous voltage into a numeric code. The ADS1271 belongs to the delta-sigma (sigma-delta) sub-family: a high-order, chopper-stabilized modulator samples the input many times per output word, and an on-board decimation filter removes both modulator noise and out-of-band signal energy. Within the broader hierarchy, this part is a data-converter IC, that is, an integrated circuit in the interface IC class, sitting between a sensor or transducer and a digital processor.
Key features include 24-bit resolution, a 105 kSPS maximum conversion rate, a single differential input channel, an SPI-compatible serial interface, and three selectable operating modes that let the designer trade speed against resolution and power. The chopper-stabilized modulator keeps drift low over the industrial temperature range, while the internal decimation filter suppresses out-of-band noise so external analog filtering can be minimized. A supply of approximately 4.75 V is indicated by the distributor part data.
Technically, the ADS1271 combines a high-order modulator with an integrated FIR decimation filter and a chopper-stabilized front end. Three operating modes allow optimization of speed, resolution, and power dissipation, which lets a single design cover very different sampling needs. The result is an input stage usable directly with bridge sensors, thermocouple-style millivolt sources, and wide-dynamic-range industrial front ends without an external instrumentation amplifier.
Typical applications include precision industrial process measurement, strain and load-cell bridges, vibration and condition monitoring, laboratory and test instrumentation, medical monitoring equipment, and low-rate high-resolution data acquisition such as temperature and pressure logging.
A key design consideration is the decimation filter: the usable bandwidth and the noise performance are set by the selected operating mode, so the digital filter and averaging implemented in the host processor must match the data rate actually configured. Layout practice also matters for the differential input pair.
This page consolidates the manufacturer datasheet and product-page parameters, distributor availability references, a parameter-by-parameter comparison against same-footprint TI converters, and practical design notes covering layout, filtering and pitfall avoidance that are not written out in the datasheet itself.
直接替換替代品,適用於 ADS1271IPW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS1271IPW (相同外形與佔位) — 差異在於 Number of Channels, Operating Temperature Range, Package, Architecture, Maximum Sampling Rate.
ADS1272IPW
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADS1262IPW
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ADS1245IPWR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADS1246IPWR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADS1271IPWR
✅ 直接替換📋 參考替代品(不在目錄中)
ADS1271IPW 最大額定值與電氣特性
| ADC Type | Sigma-Delta (Delta-Sigma) ADC |
| 解析度 | 24 bit |
| Number of Channels | 1 channel |
| Maximum Conversion Rate | 105 kSPS |
| Architecture | High-order, chopper-stabilized modulator with on-board decimation filter |
| Operating Modes | 3 selectable modes (speed / resolution / power optimization) |
| 介面 | SPI serial interface |
| 封裝 | 16-pin TSSOP (PW) |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | -40 °C to +105 °C |
| Supply Voltage (nominal) | 4.75 V |
ADS1271IPW 16-pin tssop (pw) 腳位配置指南
ADS1271IPW(16-pin tssop (pw) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS1271IPW.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS1271IPW 適用於 6 應用s: Precision Load Cell and Strain Gauge Front Ends, Industrial Process and Sensor Instrumentation, Vibration and Condition Monitoring, Test and Measurement Instrumentation, Medical and Health Monitoring Equipment, Data Acquisition and Environmental Logging.
Precision Load Cell and Strain Gauge Front Ends
The ADS1271IPW suits strain-bridge measurement because its 24-bit resolution and chopper-stabilized modulator resolve the few-millivolt differential signals produced by load cells while holding drift low across the -40 °C to +105 °C industrial range. At the 105 kSPS maximum data rate the on-board decimation filter removes modulator and out-of-band noise, so the host processor receives words that are already usable for force calibration. Connect the differential input pair to the bridge with shielded, symmetry-matched traces, reference the converter to a clean source and digital-filter in firmware to match the configured operating mode. The trade-off versus a slower 10 kSPS converter is that wider bandwidth is available for transient or dynamic weighing, at the cost of higher power and lower averaging per sample.
推薦
Industrial Process and Sensor Instrumentation
For temperature, pressure and level loops, the ADS1271IPW combines 24-bit resolution with an SPI interface that can be daisy-chained or polled from a microcontroller, leaving the analog front end simple and compact. The 16-pin TSSOP (PW) package fits tight instrument enclosures, and the wide industrial temperature range covers unheated cabinets and outdoor installations. Use the device in a slower operating mode for near-DC thermocouple-class signals where the decimation filter averages away noise, and switch to a faster mode for vibration or flow transients. Because the digital filter bandwidth follows the selected mode, configure the host digital filter and averaging to the same rate to avoid aliasing artefacts.
推薦
Vibration and Condition Monitoring
Condition-monitoring nodes need wide bandwidth without giving up DC stability, which is exactly where the ADS1271IPW sits: the 105 kSPS maximum data rate captures vibration and impact features, while the chopper-stabilized modulator keeps the long-term DC reference stable enough for drift compensation schemes. Pair the converter with a piezoelectric or MEMS accelerometer front end, route the differential pair as a matched pair away from motor and relay nodes, and use the three operating modes to trade sample rate against power when the node is battery or energy-harvesting powered. The main design consideration is aliasing: choose the operating mode so that the bandwidth of interest falls inside the decimation filter, then keep the anti-alias filter ahead of the modulator gentle to preserve the noise floor.
推薦
Test and Measurement Instrumentation
Laboratory and field instruments need a converter that resolves small signals without long settling times, and the ADS1271IPW provides 24 bits with an SPI interface that transfers words efficiently to a host processor or FPGA. In a precision measurement front end, the wide-bandwidth noise performance of the family keeps the usable bandwidth high, so a single converter can serve both slow DC readings and faster transient capture. Mount it close to the analog input, provide local high-frequency decoupling and route the digital clock and data lines away from the analog input pair to avoid coupling noise into the modulator. Where a companion serial transceiver is needed to bring data out of the instrument, an SPI-capable level translator such as the MAX3221E family is a natural match.
推薦
Medical and Health Monitoring Equipment
Patient monitoring and diagnostic equipment demand stable, low-drift conversion of small physiological signals, and the ADS1271IPW's 24-bit chopper-stabilized architecture with an extended temperature range fits that environment. Its SPI interface integrates easily with a monitoring microcontroller, and the 16-pin TSSOP footprint keeps the analog section compact next to sensor conditioning stages. Use the slowest operating mode available for ECG- or DC-level signals so that the decimation filter suppresses mains-coupled noise, and place the differential input pair symmetrically to reject common-mode pickup. Confirm the required medical qualification, isolation and creepage requirements for the finished device separately, since the converter itself carries no medical certification.
推薦
Data Acquisition and Environmental Logging
Environmental logging nodes that record temperature, humidity and pressure benefit from the ADS1271IPW because the wide industrial temperature range and 24-bit resolution preserve small analogue changes across seasons, while the low data rate of a slow operating mode reduces average power draw in remote installations. The single-channel differential input simplifies the board when each node handles one transducer, and the SPI link suits low-power microcontrollers with limited pin counts. Select the operating mode that matches the logging bandwidth, then average in firmware to suppress residual noise; do not push the rate higher than the logging needs, since the faster modes increase power consumption noticeably. Provide a low-noise reference and local decoupling at the device for the best long-term stability of logged values.
推薦
推薦產品摘要
工程參考資料,適用於 ADS1271IPW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADS1272IPW | ADS1262IPW | ADS1245IPWR | ADS1246IPWR | ADS1271IPWR |
|---|---|---|---|---|---|---|
| Package | TSSOP-16 (PW) | TSSOP-16 (PW) - same | TSSOP-16 (PW) - same | TSSOP-16 (PW) - same | TSSOP-16 (PW) - same | TSSOP-16 (PW) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Architecture | Sigma-Delta, high-order chopper-stabilized modulator with on-board decimation filter | Sigma-Delta, same family | Sigma-Delta | Sigma-Delta | Sigma-Delta | Sigma-Delta, same die |
| Interface | SPI | SPI | SPI | SPI | SPI | SPI |
主要差異化特點
- Higher maximum conversion rate within the same TSSOP-16 footprint (對比ADS1262IPW)
- Wide-bandwidth noise performance from the ADS1271 family front end (對比ADS1245IPWR)
- Three configurable operating modes for speed, resolution and power balance (對比ADS1271IPWR)
- Same 16-pin TSSOP land pattern across the compared family (對比ADS1272IPW)
設計說明
Treat the differential analog input as a matched pair. Route the two input nets as closely coupled traces on the same layer, with a solid ground plane underneath, and keep them short so the input loop area stays small. Keep the pair away from switching nodes, relay contacts, inductors and the SPI clock/data traces, since the high-order modulator converts any coupled energy directly into in-band error. Provide local decoupling at the supply pins with a short ground return, and place the analog section on the quiet side of any partition on the board.
The decimation filter defines the usable analog bandwidth, so the digital filter and averaging in the host processor must match the data rate of the selected operating mode. If the firmware averages as if the rate were higher than the configured rate, aliasing and gain errors appear in the result. Choose the slowest mode that still covers the bandwidth of interest for near-DC measurements, because the higher-rate modes consume noticeably more power, and configure the SPI clock to the maximum rate the master supports without overshooting the converter's timing limits.
Estimated: at a nominal 4.75 V supply and a typical analog plus digital power draw in the tens of milliwatts, the junction temperature rise is small in the 16-pin TSSOP package, so no heatsink is normally required. Supply sequencing matters more than thermal design: bring the analog supply up before the digital interface signals are driven, and confirm the minimum operating supply in the datasheet electrical characteristics table before fixing the system rail. The reference source must be quiet, since reference noise maps directly onto the output codes.
Three pitfalls recur in designs using this converter. First, the front end is differential: driving only one input while leaving the other unconnected destroys accuracy, so tie the unused input to the correct common-mode point. Second, a long run of unshielded cable in front of the modulator picks up mains hum that the decimation filter cannot fully remove; place the converter close to the transducer or shield the cable. Third, assuming the full 105 kSPS in every mode causes average power to exceed the design budget, so verify the per-mode data rate and power figures in the operating-mode table.
合規資訊
RoHS, REACH, AEC-Q100, lead-free and halogen-free declarations were not published alongside the manufacturer parameters reviewed for the ADS1271IPW, so their status is recorded as unknown rather than assumed. The device is specified from -40 °C to +105 °C for industrial use.