ADS7817EC - 12-Bit 200kHz Differential SAR ADC | Texas Instruments
MPN: ADS7817EC ✓ 啟用中ADS7817EC 概覽
A sampling ADC, or successive-approximation-register ADC, converts a continuously changing analog voltage into a digital code through repeated internal comparisons. The ADS7817EC belongs to the ADC hierarchy within data-converter and signal-chain semiconductors. Its differential input is particularly useful when the measured signal must reject common-mode noise, while its high input impedance allows direct connection to sensors, resistive bridges, and other transducers without an input buffer.
The principal features include 12-bit resolution, a maximum sampling rate of 200kHz, and a flexible reference range of 100mV to 2.5V. The smallest reference voltage produces a finer input-referred step of 49uV, while the largest reference produces a 1.22mV step. Automatic power-down helps reduce consumption when conversions are infrequent, and the differential architecture supports measurement of signals centered around a common-mode voltage.
Internally, the ADS7817EC uses a successive-approximation conversion process and communicates through a serial interface. The small signal range makes reference selection a central part of the analog design: lowering the reference increases resolution near the input but reduces the available full-scale range. Designers should therefore balance sensitivity, headroom, input-common-mode limits, and conversion noise rather than selecting the reference solely from the converter’s nominal resolution.
Typical uses include battery-powered instrumentation, remote data acquisition, industrial sensor interfaces, precision bridge measurements, and low-power embedded systems. A differential sensor output can be connected directly to the analog inputs when its common-mode voltage and output span satisfy the device limits. The 200kHz sampling rate also permits measurement of slowly varying analog quantities and higher-frequency signals where the required aliasing and acquisition filtering can be implemented externally.
The main design consideration is preserving the differential signal path from the source to the converter. Short traces, symmetric routing, adequate input filtering, and careful grounding help limit errors and coupling. Reference bypass capacitors should be placed close to the device, and the analog and digital return paths should be arranged to minimize shared impedance, particularly when the converter operates beside switching circuitry.
This product page consolidates the Texas Instruments specifications, package information, pricing evidence, application guidance, and engineering design notes needed to evaluate the ADS7817EC. It also distinguishes true pin-compatible alternatives from reel-format and orderable-suffix variants so procurement and engineering decisions can be made without changing the circuit unintentionally.
直接替換替代品,適用於 ADS7817EC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品ADS7817EC 最大額定值與電氣特性
| 解析度 | 12 bit |
| 取樣率 | 200kHz |
| Architecture | Successive-approximation-register (SAR) |
| Input Type | Fully differential, high impedance |
| Number of Analog Inputs | 1 differential input |
| Reference Voltage Range | 100mV to 2.5V |
| Input-Referred Resolution at 100mV Reference | 49uV |
| Input-Referred Resolution at 2.5V Reference | 1.22mV |
| Power-Down | Automatic power-down |
| 封裝 | 8-pin VSSOP |
| 安裝類型 | Surface mount |
ADS7817EC 8-pin vssop 腳位配置指南
ADS7817EC(8-pin vssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS7817EC.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS7817EC 適用於 6 應用s: Battery-Powered Instrumentation, Remote Data Acquisition, Precision Bridge Measurement, Precision Temperature Sensing, Industrial Process Control, Embedded Analog Monitoring.
Battery-Powered Instrumentation
The ADS7817EC fits battery-powered instruments that periodically measure low-level analog signals while keeping both circuit size and energy use under control. Its 12-bit SAR conversion, 200kHz maximum sampling rate, and automatic power-down support systems that alternate between active acquisition and low-power intervals. A 100mV reference can provide 49uV input-referred resolution when the transducer output has a narrow span, although the source must be designed so the differential signal and common-mode voltage remain within the converter’s input limits. Placing the input and reference bypass capacitors close to the device also reduces supply disturbance during conversion.
推薦
Remote Data Acquisition
The ADS7817EC is suitable for remote data-acquisition nodes that digitize a differential sensor output and transmit the result through a serial interface. Its high-impedance input can reduce the loading applied to the transducer, while the 200kHz sampling rate permits acquisition of rapidly changing inputs when the bandwidth is genuinely required. Differential routing reduces common-mode pickup along cable and sensor connections. For long or noisy interconnects, place suitable input filtering at the connector and preserve a symmetrical path to the converter so the measured difference is not corrupted by unequal traces or ground impedance.
推薦
Precision Bridge Measurement
The ADS7817EC can digitize outputs from resistive pressure, strain, and level bridges where excitation drift and common-mode noise would affect a single-ended measurement. A differential input measures the bridge imbalance directly, and the reference range of 100mV to 2.5V lets the designer match conversion resolution to the expected bridge output. A 100mV reference yields 49uV input-referred resolution, but it also limits the usable input span. The bridge excitation, input range, and converter common-mode limits should therefore be evaluated together before selecting the reference voltage and analog front end.
推薦
Precision Temperature Sensing
The ADS7817EC can be used in temperature-measurement systems that require a compact ADC with a differential or low-side sensing arrangement. A 12-bit converter and adjustable reference provide flexibility for resistive sensors whose output depends on excitation and temperature. The automatic power-down feature supports portable equipment that samples infrequently, reducing the amount of time the conversion circuit remains active. Accurate results also depend on a quiet reference, stable sensor excitation, and careful handling of the sensor return signal; route the measurement path away from switching nodes and use filtering that preserves the required response time.
推薦
Industrial Process Control
The ADS7817EC can serve as the measurement front end in compact industrial controllers monitoring a differential process variable. Its 200kHz sampling capability is well above the rate needed by many slow temperature, pressure, or level loops, while the small VSSOP package leaves board area for control and interface circuitry. Differential input reduces sensitivity to shared noise in industrial wiring. Use an input protection strategy appropriate for the process environment, keep the reference local and bypassed, and establish the acquisition filter with both sensor-response time and converter timing in mind.
推薦
Embedded Analog Monitoring
The ADS7817EC is useful in embedded systems that combine a microcontroller with one or more analog measurements where board space and power are constrained. Its serial conversion architecture can reduce parallel routing compared with a wide-bus ADC, and the differential input supports compact sensor interfaces. The 200kHz maximum rate allows flexibility in sampling strategy, while automatic power-down can lower activity between measurements. The host processor must accommodate the converter’s serial timing and control sequence, and the analog section should use a short return path, local reference decoupling, and input components selected for the required bandwidth.
推薦
推薦產品摘要
工程參考資料,適用於 ADS7817EC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Texas Instruments |
| Package | 8-pin VSSOP |
| Resolution | 12 bit |
| Sampling Rate | 200kHz |
| Architecture | Successive-approximation-register (SAR) |
| Input Type | Fully differential, high impedance |
| Reference Voltage Range | 100mV to 2.5V |
| Input-Referred Resolution | 49uV to 1.22mV |
| Power-Down | Automatic power-down |
主要差異化特點
- Compact differential measurement in an 8-pin package (對比ADS7817EB/250)
- Flexible reference-controlled resolution (對比ADS7817EC/250)
- Power management for intermittent acquisition (對比ADS7817EC/2K5)
設計說明
Route the two analog inputs as a close, approximately symmetrical pair and return both through the same ground reference plane. Place the input and reference bypass components directly beside their associated device pins, and keep the path from the sensor or signal source free of digital switching nodes. Differential symmetry helps preserve the intended voltage difference and reduces conversion error caused by unequal pickup.
Select the reference voltage by balancing input-referred resolution against available signal span. A 100mV reference provides 49uV input-referred resolution, while 2.5V provides 1.22mV. Confirm that the expected differential input, reference tolerance, and converter input limits remain valid across temperature and supply tolerance. Decouple the reference locally and verify the resulting noise against the smallest signal the design must resolve.
Do not treat ADS7817EC/250 and ADS7817EC/2K5 as different converter designs or use them to populate the alternatives list. These are orderable formatting differences for the ADS7817 family. A true replacement must preserve the 8-pin VSSOP footprint, pin functions, electrical limits, serial timing, and reference behavior; otherwise PCB and firmware changes are required.
Add input filtering appropriate to the source impedance and required bandwidth rather than copying a generic capacitor value. The filter should attenuate high-frequency noise without creating excessive settling time between conversions. Verify acquisition behavior at the highest intended sampling rate, keep the two differential channels similarly filtered, and account for any mismatch between the analog input impedance and the external components.
合規資訊
The Texas Instruments product material and official datasheet link are the authorities for package, electrical, environmental, and qualification details. Compliance declarations must be checked against the current manufacturer documentation for the exact ordering code.