ADS7817EC - 12-Bit 200kHz Differential SAR ADC | Texas Instruments
MPN: ADS7817EC ✓ فعالADS7817EC جائزہ
A sampling ADC, or successive-approximation-register ADC, converts a continuously changing analog voltage into a digital code through repeated internal comparisons. The ADS7817EC belongs to the ADC hierarchy within data-converter and signal-chain semiconductors. Its differential input is particularly useful when the measured signal must reject common-mode noise, while its high input impedance allows direct connection to sensors, resistive bridges, and other transducers without an input buffer.
The principal features include 12-bit resolution, a maximum sampling rate of 200kHz, and a flexible reference range of 100mV to 2.5V. The smallest reference voltage produces a finer input-referred step of 49uV, while the largest reference produces a 1.22mV step. Automatic power-down helps reduce consumption when conversions are infrequent, and the differential architecture supports measurement of signals centered around a common-mode voltage.
Internally, the ADS7817EC uses a successive-approximation conversion process and communicates through a serial interface. The small signal range makes reference selection a central part of the analog design: lowering the reference increases resolution near the input but reduces the available full-scale range. Designers should therefore balance sensitivity, headroom, input-common-mode limits, and conversion noise rather than selecting the reference solely from the converter’s nominal resolution.
Typical uses include battery-powered instrumentation, remote data acquisition, industrial sensor interfaces, precision bridge measurements, and low-power embedded systems. A differential sensor output can be connected directly to the analog inputs when its common-mode voltage and output span satisfy the device limits. The 200kHz sampling rate also permits measurement of slowly varying analog quantities and higher-frequency signals where the required aliasing and acquisition filtering can be implemented externally.
The main design consideration is preserving the differential signal path from the source to the converter. Short traces, symmetric routing, adequate input filtering, and careful grounding help limit errors and coupling. Reference bypass capacitors should be placed close to the device, and the analog and digital return paths should be arranged to minimize shared impedance, particularly when the converter operates beside switching circuitry.
This product page consolidates the Texas Instruments specifications, package information, pricing evidence, application guidance, and engineering design notes needed to evaluate the ADS7817EC. It also distinguishes true pin-compatible alternatives from reel-format and orderable-suffix variants so procurement and engineering decisions can be made without changing the circuit unintentionally.
کے لیے ڈراپ اِن متبادل ADS7817EC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںADS7817EC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ریزولوشن | 12 bit |
| سیمپلنگ ریٹ | 200kHz |
| Architecture | Successive-approximation-register (SAR) |
| Input Type | Fully differential, high impedance |
| Number of Analog Inputs | 1 differential input |
| Reference Voltage Range | 100mV to 2.5V |
| Input-Referred Resolution at 100mV Reference | 49uV |
| Input-Referred Resolution at 2.5V Reference | 1.22mV |
| Power-Down | Automatic power-down |
| پیکیج | 8-pin VSSOP |
| ماؤنٹنگ ٹائپ | Surface mount |
ADS7817EC 8-pin vssop پن کنفیگریشن گائیڈ
ADS7817EC (8-pin vssop پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADS7817EC.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ADS7817EC کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Instrumentation, Remote Data Acquisition, Precision Bridge Measurement, Precision Temperature Sensing, Industrial Process Control, Embedded Analog Monitoring.
Battery-Powered Instrumentation
The ADS7817EC fits battery-powered instruments that periodically measure low-level analog signals while keeping both circuit size and energy use under control. Its 12-bit SAR conversion, 200kHz maximum sampling rate, and automatic power-down support systems that alternate between active acquisition and low-power intervals. A 100mV reference can provide 49uV input-referred resolution when the transducer output has a narrow span, although the source must be designed so the differential signal and common-mode voltage remain within the converter’s input limits. Placing the input and reference bypass capacitors close to the device also reduces supply disturbance during conversion.
تجویز کردہ
Remote Data Acquisition
The ADS7817EC is suitable for remote data-acquisition nodes that digitize a differential sensor output and transmit the result through a serial interface. Its high-impedance input can reduce the loading applied to the transducer, while the 200kHz sampling rate permits acquisition of rapidly changing inputs when the bandwidth is genuinely required. Differential routing reduces common-mode pickup along cable and sensor connections. For long or noisy interconnects, place suitable input filtering at the connector and preserve a symmetrical path to the converter so the measured difference is not corrupted by unequal traces or ground impedance.
تجویز کردہ
Precision Bridge Measurement
The ADS7817EC can digitize outputs from resistive pressure, strain, and level bridges where excitation drift and common-mode noise would affect a single-ended measurement. A differential input measures the bridge imbalance directly, and the reference range of 100mV to 2.5V lets the designer match conversion resolution to the expected bridge output. A 100mV reference yields 49uV input-referred resolution, but it also limits the usable input span. The bridge excitation, input range, and converter common-mode limits should therefore be evaluated together before selecting the reference voltage and analog front end.
تجویز کردہ
Precision Temperature Sensing
The ADS7817EC can be used in temperature-measurement systems that require a compact ADC with a differential or low-side sensing arrangement. A 12-bit converter and adjustable reference provide flexibility for resistive sensors whose output depends on excitation and temperature. The automatic power-down feature supports portable equipment that samples infrequently, reducing the amount of time the conversion circuit remains active. Accurate results also depend on a quiet reference, stable sensor excitation, and careful handling of the sensor return signal; route the measurement path away from switching nodes and use filtering that preserves the required response time.
تجویز کردہ
Industrial Process Control
The ADS7817EC can serve as the measurement front end in compact industrial controllers monitoring a differential process variable. Its 200kHz sampling capability is well above the rate needed by many slow temperature, pressure, or level loops, while the small VSSOP package leaves board area for control and interface circuitry. Differential input reduces sensitivity to shared noise in industrial wiring. Use an input protection strategy appropriate for the process environment, keep the reference local and bypassed, and establish the acquisition filter with both sensor-response time and converter timing in mind.
تجویز کردہ
Embedded Analog Monitoring
The ADS7817EC is useful in embedded systems that combine a microcontroller with one or more analog measurements where board space and power are constrained. Its serial conversion architecture can reduce parallel routing compared with a wide-bus ADC, and the differential input supports compact sensor interfaces. The 200kHz maximum rate allows flexibility in sampling strategy, while automatic power-down can lower activity between measurements. The host processor must accommodate the converter’s serial timing and control sequence, and the analog section should use a short return path, local reference decoupling, and input components selected for the required bandwidth.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADS7817EC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Brand | Texas Instruments |
| Package | 8-pin VSSOP |
| Resolution | 12 bit |
| Sampling Rate | 200kHz |
| Architecture | Successive-approximation-register (SAR) |
| Input Type | Fully differential, high impedance |
| Reference Voltage Range | 100mV to 2.5V |
| Input-Referred Resolution | 49uV to 1.22mV |
| Power-Down | Automatic power-down |
اہم امتیازی خصوصیات
- Compact differential measurement in an 8-pin package (بمقابلہADS7817EB/250)
- Flexible reference-controlled resolution (بمقابلہADS7817EC/250)
- Power management for intermittent acquisition (بمقابلہADS7817EC/2K5)
ڈیزائن نوٹس
Route the two analog inputs as a close, approximately symmetrical pair and return both through the same ground reference plane. Place the input and reference bypass components directly beside their associated device pins, and keep the path from the sensor or signal source free of digital switching nodes. Differential symmetry helps preserve the intended voltage difference and reduces conversion error caused by unequal pickup.
Select the reference voltage by balancing input-referred resolution against available signal span. A 100mV reference provides 49uV input-referred resolution, while 2.5V provides 1.22mV. Confirm that the expected differential input, reference tolerance, and converter input limits remain valid across temperature and supply tolerance. Decouple the reference locally and verify the resulting noise against the smallest signal the design must resolve.
Do not treat ADS7817EC/250 and ADS7817EC/2K5 as different converter designs or use them to populate the alternatives list. These are orderable formatting differences for the ADS7817 family. A true replacement must preserve the 8-pin VSSOP footprint, pin functions, electrical limits, serial timing, and reference behavior; otherwise PCB and firmware changes are required.
Add input filtering appropriate to the source impedance and required bandwidth rather than copying a generic capacitor value. The filter should attenuate high-frequency noise without creating excessive settling time between conversions. Verify acquisition behavior at the highest intended sampling rate, keep the two differential channels similarly filtered, and account for any mismatch between the analog input impedance and the external components.
تعمیل کی معلومات
The Texas Instruments product material and official datasheet link are the authorities for package, electrical, environmental, and qualification details. Compliance declarations must be checked against the current manufacturer documentation for the exact ordering code.