ADS7817PB - 12-Bit 200 kSPS Differential ADC | Texas Instruments
MPN: ADS7817PB ✓ 啟用中ADS7817PB 概覽
An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital code. A differential ADC measures the voltage difference between two input nodes rather than the voltage relative to ground. This topology can reject common-mode disturbances when the source is balanced, improving measurement integrity in systems containing switching converters, motor-control circuitry, or long sensor connections. The ADS7817PB belongs to the ADC → data-converter IC → semiconductor hierarchy.
The 12-bit conversion resolution provides 4,096 digital codes, while the 200 kSPS sampling rate supports rapidly changing sensor signals. Its adjustable reference spans 100 mV to 2.5 V, allowing the analog front end to set the conversion range. The manufacturer identifies the differential input, low-power operation, automatic power-down, and compact package as principal benefits for transducer interfaces, battery-operated systems, remote acquisition, and multiplexed measurement systems.
The sampling architecture captures the analog input through an internal sample-and-hold stage before conversion. Differential operation supports the connection of bridge sensors and other sources whose useful output appears across two terminals. The 8-pin package limits board area, while serial data output reduces the number of interconnections required for a low-channel-count acquisition design. A 5 V supply and a -40 °C to +85 °C operating range suit industrial equipment.
Typical uses include pressure and temperature transducer channels, battery-powered instrumentation, remote sensor nodes, and multi-channel measurement boards. In each case, the 200 kSPS rate provides margin for sampling while the differential architecture helps preserve signal quality. The low-power and automatic power-down characteristics are especially useful when acquisition duty cycle is intermittent.
Designers should treat the full-scale input range, reference accuracy, common-mode limits, source impedance, and conversion timing as a coordinated set. Decoupling capacitors should be placed directly at the supply and reference pins, while the analog input path should remain short and symmetric to minimize offset and noise pickup. Review the manufacturer pin-description and application information before assigning PCB signals or selecting input filtering values.
This product page combines the manufacturer specifications with application guidance, package information, engineering design notes, and a structured view of drop-in replacement options. It is intended to help engineers evaluate signal-chain compatibility, thermal conditions, layout risk, and sourcing requirements before committing the ADS7817PB to a new analog measurement design.
直接替換替代品,適用於 ADS7817PB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS7817PB (相同外形與佔位) — 差異在於 Input Type, Mounting Type, Number of Input Channels, Operating Temperature Range, Package.
此產品無可直接替換的替代品。
申請替代品ADS7817PB 最大額定值與電氣特性
| Converter Type | 12-bit sampling analog-to-digital converter |
| Architecture | SAR |
| 解析度 | 12 bit |
| 取樣率 | 200 kSPS |
| Input Type | Fully differential analog input |
| Number of Input Channels | 1 channel |
| Reference Voltage Range | 100 mV to 2.5 V |
| Input-Referred Resolution | 49 µV to 1.22 mV |
| 供應電壓 | 5 V |
| Linearity Error | 0.0488% |
| Output Interface | Serial |
| Power-Down Feature | Automatic power down |
| 工作溫度範圍 | -40 °C to +85 °C |
| 封裝 | 8-pin plastic mini-DIP |
| 安裝類型 | Through-hole |
| Product Type | Micro-power differential sampling ADC |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
ADS7817PB 8-pin plastic mini-dip 腳位配置指南
ADS7817PB(8-pin plastic mini-dip 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS7817PB.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS7817PB 適用於 6 應用s: Bridge Sensor Acquisition, Battery-Powered Instrument, Remote Sensor Node, Industrial Process Measurement, Multichannel Measurement Board, Laboratory Data Logger.
Bridge Sensor Acquisition
The ADS7817PB fits bridge-transducer front ends because its fully differential input measures the small voltage developed across the sensing element without requiring either sensor terminal to be tied directly to ground. The 12-bit converter provides 4,096 digital levels, while the adjustable 100 mV to 2.5 V reference permits the input range to be matched to the transducer output. At 200 kSPS, the converter also handles rapidly changing pressure, strain, or force signals. Keep the analog path short and balanced, place reference decoupling at the device, and verify common-mode headroom against the official electrical limits.
推薦
Battery-Powered Instrument
The ADS7817PB is appropriate for portable instruments because the 5 V converter combines low-power operation with automatic power-down. A designer can enable acquisition only while a measurement is required, reducing standby consumption in the surrounding system. The 200 kSPS rate supports rapid sensor sampling, and the 12-bit output is useful for process variables, battery voltage, or environmental readings. Power sequencing, analog settling, and reference current should be evaluated together because converter resolution alone does not determine battery life. The 8-pin mini-DIP package also simplifies through-hole prototyping and repair.
推薦
Remote Sensor Node
The ADS7817PB supports remote acquisition nodes that digitize low-level differential sensor outputs before transmission or local processing. Its 12-bit resolution and sampling rate of 200 kSPS provide adequate throughput for many pressure, temperature, and position sensors. Differential signaling helps preserve the useful sensor voltage when common-mode noise is present, although input filtering and source impedance must still be engineered correctly. Automatic power-down is valuable when the node wakes periodically. Use short analog traces, a stable reference arrangement, and grounding that minimizes return-path coupling between the converter and digital circuitry.
推薦
Industrial Process Measurement
The ADS7817PB is suitable for industrial process measurement when the sensor produces a differential signal in the range established by the selected reference. Its 12-bit conversion resolution, 0.0488% stated linearity error, and 200 kSPS sampling rate provide a practical combination for monitoring valves, heaters, pressure lines, and analog control signals. The -40 °C to +85 °C operating range supports industrial equipment when the complete assembly is thermally qualified. Designers should add appropriate input protection, isolation, filtering, and calibration while observing the common-mode and absolute-maximum limits in the manufacturer documentation.
推薦
Multichannel Measurement Board
The ADS7817PB can form one channel of a multichannel measurement board using analog multiplexing ahead of the converter. Its 200 kSPS rate allows each selected channel to be sampled within the required system timing, while the differential input supports balanced sensor connections. Because the converter has one input channel, the mux settling time and source impedance directly affect conversion accuracy. Select an external reference and capacitor network that preserve performance across the scanned range, and include calibration paths where gain or offset compensation is required. The 8-pin mini-DIP package keeps through-hole channel boards compact.
推薦
Laboratory Data Logger
The ADS7817PB is useful in laboratory data loggers that need accurate digitizing of differential test signals with modest channel count. The 12-bit resolution supports common automation and measurement tasks, and the 200 kSPS rate is sufficient for many sensor waveforms. The adjustable reference from 100 mV to 2.5 V allows the designer to tailor the conversion range to the signal under test rather than use the full reference unnecessarily. For laboratory use, provide stable reference decoupling, controlled analog grounding, and calibration routines. Confirm that the selected input range and acquisition bandwidth satisfy the test specification.
推薦
推薦產品摘要
工程參考資料,適用於 ADS7817PB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 8-pin plastic mini-DIP |
| Brand | Texas Instruments |
| Resolution | 12 bit |
| Sampling Rate | 200 kSPS |
| Input Configuration | Fully differential, 1 channel |
| Reference Voltage Range | 100 mV to 2.5 V |
| Input-Referred Resolution | 49 µV to 1.22 mV |
| Supply Voltage | 5 V |
| Linearity Error | 0.0488% |
| Operating Temperature Range | -40 °C to +85 °C |
設計說明
Keep the analog input traces short, symmetric, and away from switching nodes and digital clock lines. Place the device's supply and reference bypass capacitors close to their respective pins, with the ground return arranged to minimize shared impedance with sensitive input currents. The differential input architecture reduces common-mode pickup, but it cannot compensate for an unbalanced or poorly grounded analog layout.
Use the manufacturer input-capacitance and settling guidance when selecting the series resistance and capacitor value ahead of each analog input. When an analog multiplexer precedes the ADC, allow sufficient acquisition time for the multiplexer output, sampling capacitor, and external source impedance to settle. Insufficient acquisition time can appear as channel-dependent gain error even when the converter itself operates at 200 kSPS.
Treat the 5 V supply and reference network as part of the measurement accuracy path. Decouple the supply at the device and follow the manufacturer reference layout with short, low-inductance connections. If automatic power-down is used, verify that the reference settles before conversion and that control timing meets the required acquisition schedule. Recheck rail sequencing whenever the ADC and analog source do not share a common startup order.
Do not treat a related ADC with a similar resolution or sampling rate as a drop-in replacement without comparing package, pin assignment, reference range, serial protocol, timing, and input common-mode limits. The ADS7817PB target order code specifically uses an 8-pin plastic mini-DIP package. A surface-mount alternative may require a different footprint and therefore a PCB redesign even if its conversion specifications appear comparable.
合規資訊
The available product information does not explicitly establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this product.