Texas Instruments

ADS7817PB - 12-Bit 200 kSPS Differential ADC | Texas Instruments

MPN: ADS7817PB ✓ فعال
100 mV to 2.5 V Vdss 8-pin plastic mini-DIP Package
حداقل سفارش: 1 |

ADS7817PB نمای کلی

The Texas Instruments ADS7817PB is a 12-bit, 200 kSPS sampling analog-to-digital converter with a fully differential input and a selectable reference voltage from 100 mV to 2.5 V. Its input-referred resolution ranges from 49 µV to 1.22 mV, and the device is housed in an 8-pin plastic mini-DIP package. The converter combines low power, differential input, and automatic power-down operation for compact measurement systems.

An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital code. A differential ADC measures the voltage difference between two input nodes rather than the voltage relative to ground. This topology can reject common-mode disturbances when the source is balanced, improving measurement integrity in systems containing switching converters, motor-control circuitry, or long sensor connections. The ADS7817PB belongs to the ADC → data-converter IC → semiconductor hierarchy.

The 12-bit conversion resolution provides 4,096 digital codes, while the 200 kSPS sampling rate supports rapidly changing sensor signals. Its adjustable reference spans 100 mV to 2.5 V, allowing the analog front end to set the conversion range. The manufacturer identifies the differential input, low-power operation, automatic power-down, and compact package as principal benefits for transducer interfaces, battery-operated systems, remote acquisition, and multiplexed measurement systems.

The sampling architecture captures the analog input through an internal sample-and-hold stage before conversion. Differential operation supports the connection of bridge sensors and other sources whose useful output appears across two terminals. The 8-pin package limits board area, while serial data output reduces the number of interconnections required for a low-channel-count acquisition design. A 5 V supply and a -40 °C to +85 °C operating range suit industrial equipment.

Typical uses include pressure and temperature transducer channels, battery-powered instrumentation, remote sensor nodes, and multi-channel measurement boards. In each case, the 200 kSPS rate provides margin for sampling while the differential architecture helps preserve signal quality. The low-power and automatic power-down characteristics are especially useful when acquisition duty cycle is intermittent.

Designers should treat the full-scale input range, reference accuracy, common-mode limits, source impedance, and conversion timing as a coordinated set. Decoupling capacitors should be placed directly at the supply and reference pins, while the analog input path should remain short and symmetric to minimize offset and noise pickup. Review the manufacturer pin-description and application information before assigning PCB signals or selecting input filtering values.

This product page combines the manufacturer specifications with application guidance, package information, engineering design notes, and a structured view of drop-in replacement options. It is intended to help engineers evaluate signal-chain compatibility, thermal conditions, layout risk, and sourcing requirements before committing the ADS7817PB to a new analog measurement design.

جایگزین‌های drop-in برای ADS7817PB — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ADS7817PB (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Input Type, Mounting Type, Number of Input Channels, Operating Temperature Range, Package.

Texas Instruments
Input Type: High impedance analog input
Mounting Type: Surface Mount
Number of Input Channels: 1
مقایسه با ADS7817PB →

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

ADS7817PB حداکثر مقادیر مجاز و مشخصات الکتریکی

Converter Type 12-bit sampling analog-to-digital converter
Architecture SAR
رزولوشن 12 bit
نرخ نمونه‌برداری 200 kSPS
Input Type Fully differential analog input
Number of Input Channels 1 channel
Reference Voltage Range 100 mV to 2.5 V
Input-Referred Resolution 49 µV to 1.22 mV
ولتاژ تغذیه 5 V
Linearity Error 0.0488%
Output Interface Serial
Power-Down Feature Automatic power down
محدوده دمای کاری -40 °C to +85 °C
بسته‌بندی 8-pin plastic mini-DIP
نوع نصب Through-hole
Product Type Micro-power differential sampling ADC
وضعیت RoHS unknown
REACH Status unknown

راهنمای پیکربندی پین ADS7817PB 8-pin plastic mini-dip

پیکربندی پین برای ADS7817PB (پکیج 8-pin plastic mini-dip). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin plastic mini-dip برای ADS7817PB

داده پین‌آوت تفصیلی موجود نیست برای ADS7817PB.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ADS7817PB مناسب است برای 6 کاربردs: Bridge Sensor Acquisition, Battery-Powered Instrument, Remote Sensor Node, Industrial Process Measurement, Multichannel Measurement Board, Laboratory Data Logger.

🏭

Bridge Sensor Acquisition

The ADS7817PB fits bridge-transducer front ends because its fully differential input measures the small voltage developed across the sensing element without requiring either sensor terminal to be tied directly to ground. The 12-bit converter provides 4,096 digital levels, while the adjustable 100 mV to 2.5 V reference permits the input range to be matched to the transducer output. At 200 kSPS, the converter also handles rapidly changing pressure, strain, or force signals. Keep the analog path short and balanced, place reference decoupling at the device, and verify common-mode headroom against the official electrical limits.

⚡

Battery-Powered Instrument

The ADS7817PB is appropriate for portable instruments because the 5 V converter combines low-power operation with automatic power-down. A designer can enable acquisition only while a measurement is required, reducing standby consumption in the surrounding system. The 200 kSPS rate supports rapid sensor sampling, and the 12-bit output is useful for process variables, battery voltage, or environmental readings. Power sequencing, analog settling, and reference current should be evaluated together because converter resolution alone does not determine battery life. The 8-pin mini-DIP package also simplifies through-hole prototyping and repair.

🌐

Remote Sensor Node

The ADS7817PB supports remote acquisition nodes that digitize low-level differential sensor outputs before transmission or local processing. Its 12-bit resolution and sampling rate of 200 kSPS provide adequate throughput for many pressure, temperature, and position sensors. Differential signaling helps preserve the useful sensor voltage when common-mode noise is present, although input filtering and source impedance must still be engineered correctly. Automatic power-down is valuable when the node wakes periodically. Use short analog traces, a stable reference arrangement, and grounding that minimizes return-path coupling between the converter and digital circuitry.

🏭

Industrial Process Measurement

The ADS7817PB is suitable for industrial process measurement when the sensor produces a differential signal in the range established by the selected reference. Its 12-bit conversion resolution, 0.0488% stated linearity error, and 200 kSPS sampling rate provide a practical combination for monitoring valves, heaters, pressure lines, and analog control signals. The -40 °C to +85 °C operating range supports industrial equipment when the complete assembly is thermally qualified. Designers should add appropriate input protection, isolation, filtering, and calibration while observing the common-mode and absolute-maximum limits in the manufacturer documentation.

🖥️

Multichannel Measurement Board

The ADS7817PB can form one channel of a multichannel measurement board using analog multiplexing ahead of the converter. Its 200 kSPS rate allows each selected channel to be sampled within the required system timing, while the differential input supports balanced sensor connections. Because the converter has one input channel, the mux settling time and source impedance directly affect conversion accuracy. Select an external reference and capacitor network that preserve performance across the scanned range, and include calibration paths where gain or offset compensation is required. The 8-pin mini-DIP package keeps through-hole channel boards compact.

🧩

Laboratory Data Logger

The ADS7817PB is useful in laboratory data loggers that need accurate digitizing of differential test signals with modest channel count. The 12-bit resolution supports common automation and measurement tasks, and the 200 kSPS rate is sufficient for many sensor waveforms. The adjustable reference from 100 mV to 2.5 V allows the designer to tailor the conversion range to the signal under test rather than use the full reference unnecessarily. For laboratory use, provide stable reference decoupling, controlled analog grounding, and calibration routines. Confirm that the selected input range and acquisition bandwidth satisfy the test specification.

خلاصه محصولات پیشنهادی

ADS7822UB Related Texas Instruments ADC family member for comparison استفاده‌شده در: Bridge Sensor Acquisition, Battery-Powered Instrument, Remote Sensor Node, Industrial Process Measurement, Multichannel Measurement Board, Laboratory Data Logger LTC1864AIS8#TR Related low-power differential ADC comparison part استفاده‌شده در: Bridge Sensor Acquisition, Remote Sensor Node, Multichannel Measurement Board, Laboratory Data Logger ADS7817PB Texas Instruments استفاده‌شده در: Battery-Powered Instrument, Industrial Process Measurement
What is the ADS7817PB?
The ADS7817PB is a Texas Instruments 12-bit, 200 kSPS sampling ADC with a fully differential analog input, adjustable 100 mV to 2.5 V reference, and an 8-pin plastic mini-DIP package. According to the manufacturer product page, its differential input, low-power operation, and automatic power-down function make it suitable for transducers, battery-operated systems, remote data acquisition, and multichannel measurement designs.
What is the operating voltage of ADS7817PB?
The ADS7817PB operates from a 5 V supply. The manufacturer product information identifies a 5 V power-supply requirement for this 12-bit differential ADC. Its analog operating range is established by the external reference, which can vary from 100 mV to 2.5 V, while the converter accepts a fully differential input and produces a 200 kSPS sampling rate.
What is the resolution and sampling rate of ADS7817PB?
The ADS7817PB provides 12-bit resolution and samples at up to 200 kSPS. The 12-bit output represents the selected input range with 4,096 quantization levels. Texas Instruments specifies input-referred resolution from 49 µV to 1.22 mV, depending on the selected reference voltage within the device's 100 mV to 2.5 V reference range.
Where can I download the ADS7817PB datasheet PDF?
The official ADS7817 datasheet PDF is available through Texas Instruments at https://www.ti.com/lit/gpn/ADS7817. The manufacturer page describes the 12-bit, 200 kSPS differential ADC and its package options. Use the official document for pin descriptions, electrical limits, timing information, reference recommendations, and the application circuit before finalizing PCB connections.
Where can I find the ADS7817PB pinout?
The ADS7817PB pinout is shown in the official Texas Instruments ADS7817 datasheet at https://www.ti.com/lit/gpn/ADS7817. The target order code uses an 8-pin plastic mini-DIP package. Use the manufacturer's pin-description table when assigning supply, ground, analog inputs, reference, control, and serial-data signals to the PCB rather than inferring connections from a generic 8-pin ADC layout.
Is ADS7817PB suitable for differential sensor measurements?
Yes, ADS7817PB is suitable for differential sensor measurements because it uses a fully differential input and supports reference voltages from 100 mV to 2.5 V. This arrangement is appropriate for bridge sensors and other balanced sources whose output is measured across two nodes. The 12-bit resolution, 200 kSPS sampling rate, and input-referred resolution down to 49 µV support precision acquisition.
What can replace ADS7817PB?
A direct replacement should match the 8-pin plastic mini-DIP footprint, pin assignments, 12-bit resolution, serial interface, 5 V supply, reference range, and conversion timing. No uniquely verified 8-pin mini-DIP alternative was established for ADS7817PB, so an engineer should validate any candidate against the official datasheet before treating it as a drop-in replacement. The Request a Quote form on this page can assist with exact-order sourcing.
Is ADS7817PB the same as ADS7822UB?
No, ADS7817PB and ADS7822UB are not established as pin-compatible drop-in equivalents. ADS7817PB uses an 8-pin plastic mini-DIP package, while ADS7822UB denotes a different package option. Although both belong to related Texas Instruments ADS782x-family products, package construction, pin accessibility, and exact interface details must be compared before any substitution.
ADS7817PB vs ADS7822UB - which is better for a remote sensor node?
ADS7817PB is the better match when an existing 8-pin plastic mini-DIP footprint and the 12-bit, 200 kSPS differential conversion characteristics are required. ADS7822UB may suit a different package and application, but the verified information does not establish a pin-for-pin replacement. Selection should prioritize footprint, supply voltage, reference range, timing, and digital interface compatibility.
When should I choose ADS7817PB over a smaller ADC package?
Choose ADS7817PB when through-hole assembly, an 8-pin mini-DIP footprint, differential input, and a 200 kSPS conversion rate are more important than minimum PCB area. Its 12-bit resolution and 49 µV to 1.22 mV input-referred resolution suit low-level transducer measurement. A smaller package can improve layout density but requires a different footprint and may be less convenient for prototyping or manual assembly.
Is ADS7817PB suitable for battery-powered data acquisition?
Yes, ADS7817PB is suitable for battery-powered data acquisition because Texas Instruments identifies low-power operation and automatic power-down as core features. Its 5 V supply, 12-bit resolution, and 200 kSPS sampling capability support compact measurement nodes. The overall battery life still depends on the complete signal chain, duty cycle, reference circuitry, and external sensor consumption.
What are the key specifications of ADS7817PB that engineers should know?
The key ADS7817PB specifications are 12-bit resolution, a 200 kSPS sampling rate, one fully differential input channel, a 100 mV to 2.5 V reference range, and a 5 V supply. The manufacturer specifies input-referred resolution of 49 µV to 1.22 mV, 0.0488% linearity error, automatic power-down, and an operating range of -40 °C to +85 °C. The target package is an 8-pin plastic mini-DIP.
What is the best Texas Instruments equivalent for ADS7817PB?
The best direct Texas Instruments equivalent must use the same 8-pin plastic mini-DIP package and preserve the pin assignments, differential input, 5 V supply, reference range, serial interface, and conversion timing. The verified alternatives identify related ADS7817 and ADS7822-family devices, but they do not establish a same-package drop-in replacement. Do not substitute solely because resolution or sampling rate appear similar.
Where to buy ADS7817PB online?
Use the Request a Quote form on this page to request the exact ADS7817PB order code, current commercial terms, and available quantity. The form is the appropriate route for exact-order sourcing and avoids confusion with related ADS7817 package options. Confirm the 8-pin plastic mini-DIP ordering suffix and manufacturing requirements before releasing the purchase order.
What is the price of ADS7817PB?
Current pricing for ADS7817PB is best obtained through the Request a Quote form on this page. The commercial quote should identify the exact ADS7817PB MPN, quantity, and agreed delivery terms. Request confirmation of stock, packaging, and lead time as part of the same inquiry so that the order can be evaluated without ambiguity.
What is the lead time and stock status for ADS7817PB?
Request the current lead time, stock position, and minimum order quantity through the Request a Quote form on this page. These commercial conditions can vary with order quantity and supply conditions, so they should be confirmed for the exact ADS7817PB suffix. The inquiry should also state the required quantity and whether reels, tubes, or another approved delivery format are needed.

داده‌های مرجع مهندسی برای ADS7817PB — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ADS7817PB when the design requires a 12-bit, 200 kSPS ADC with a fully differential input, a 5 V supply, an adjustable 100 mV to 2.5 V reference, and an 8-pin plastic mini-DIP footprint. Its through-hole package is especially convenient for prototypes, repairable instruments, and industrial assemblies that do not require the smallest possible footprint. Do not select it merely because another ADC has a similar conversion rate: verify the serial interface, timing, common-mode range, reference arrangement, and absolute-maximum ratings. Related ADS782x and LTC1864 devices can be useful functional comparisons, but the verified cross-reference information does not establish them as same-package drop-in replacements. For an existing ADS7817PB PCB, continue only with a candidate whose package drawing and every pin assignment have been confirmed against the official datasheets.

مقایسه با جایگزین‌ها

پارامتر این محصول
Package 8-pin plastic mini-DIP
Brand Texas Instruments
Resolution 12 bit
Sampling Rate 200 kSPS
Input Configuration Fully differential, 1 channel
Reference Voltage Range 100 mV to 2.5 V
Input-Referred Resolution 49 µV to 1.22 mV
Supply Voltage 5 V
Linearity Error 0.0488%
Operating Temperature Range -40 °C to +85 °C

یادداشت‌های طراحی

Keep the analog input traces short, symmetric, and away from switching nodes and digital clock lines. Place the device's supply and reference bypass capacitors close to their respective pins, with the ground return arranged to minimize shared impedance with sensitive input currents. The differential input architecture reduces common-mode pickup, but it cannot compensate for an unbalanced or poorly grounded analog layout.

Use the manufacturer input-capacitance and settling guidance when selecting the series resistance and capacitor value ahead of each analog input. When an analog multiplexer precedes the ADC, allow sufficient acquisition time for the multiplexer output, sampling capacitor, and external source impedance to settle. Insufficient acquisition time can appear as channel-dependent gain error even when the converter itself operates at 200 kSPS.

Treat the 5 V supply and reference network as part of the measurement accuracy path. Decouple the supply at the device and follow the manufacturer reference layout with short, low-inductance connections. If automatic power-down is used, verify that the reference settles before conversion and that control timing meets the required acquisition schedule. Recheck rail sequencing whenever the ADC and analog source do not share a common startup order.

Do not treat a related ADC with a similar resolution or sampling rate as a drop-in replacement without comparing package, pin assignment, reference range, serial protocol, timing, and input common-mode limits. The ADS7817PB target order code specifically uses an 8-pin plastic mini-DIP package. A surface-mount alternative may require a different footprint and therefore a PCB redesign even if its conversion specifications appear comparable.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available product information does not explicitly establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this product.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ADS7817PB datasheet ADS7817PB datasheet pdf ADS7817PB pinout ADS7817PB specifications ADS7817PB 8-PDIP ADS7817PB replacement ADS7817PB equivalent ADS7817PB cross reference ADS7817PB vs ADS7822UB Texas Instruments ADS7817PB ADS7817PB differential ADC ADS7817PB price ADS7817PB stock ADS7817PB transducer measurement

قطعات و اصطلاحات مرتبط

Texas Instruments ADS7817 ADS7817PB ADS7822UB LTC1864AIS8#TR analog-to-digital converter ADC successive-approximation register SAR ADC data-converter IC semiconductor fully differential input input-referred resolution reference voltage automatic power-down 12-bit resolution 200 kSPS sampling rate 8-pin plastic mini-DIP mini-DIP package through-hole technology bridge sensor battery-operated data acquisition remote data acquisition industrial process measurement
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ