ADS7817PB - 12-Bit 200 kSPS Differential ADC | Texas Instruments
部品番号: ADS7817PB ✓ 生産中ADS7817PB 概要
An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital code. A differential ADC measures the voltage difference between two input nodes rather than the voltage relative to ground. This topology can reject common-mode disturbances when the source is balanced, improving measurement integrity in systems containing switching converters, motor-control circuitry, or long sensor connections. The ADS7817PB belongs to the ADC → data-converter IC → semiconductor hierarchy.
The 12-bit conversion resolution provides 4,096 digital codes, while the 200 kSPS sampling rate supports rapidly changing sensor signals. Its adjustable reference spans 100 mV to 2.5 V, allowing the analog front end to set the conversion range. The manufacturer identifies the differential input, low-power operation, automatic power-down, and compact package as principal benefits for transducer interfaces, battery-operated systems, remote acquisition, and multiplexed measurement systems.
The sampling architecture captures the analog input through an internal sample-and-hold stage before conversion. Differential operation supports the connection of bridge sensors and other sources whose useful output appears across two terminals. The 8-pin package limits board area, while serial data output reduces the number of interconnections required for a low-channel-count acquisition design. A 5 V supply and a -40 °C to +85 °C operating range suit industrial equipment.
Typical uses include pressure and temperature transducer channels, battery-powered instrumentation, remote sensor nodes, and multi-channel measurement boards. In each case, the 200 kSPS rate provides margin for sampling while the differential architecture helps preserve signal quality. The low-power and automatic power-down characteristics are especially useful when acquisition duty cycle is intermittent.
Designers should treat the full-scale input range, reference accuracy, common-mode limits, source impedance, and conversion timing as a coordinated set. Decoupling capacitors should be placed directly at the supply and reference pins, while the analog input path should remain short and symmetric to minimize offset and noise pickup. Review the manufacturer pin-description and application information before assigning PCB signals or selecting input filtering values.
This product page combines the manufacturer specifications with application guidance, package information, engineering design notes, and a structured view of drop-in replacement options. It is intended to help engineers evaluate signal-chain compatibility, thermal conditions, layout risk, and sourcing requirements before committing the ADS7817PB to a new analog measurement design.
ドロップイン代替品: ADS7817PB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADS7817PB (同一形状・フットプリント) — 相違点: Input Type, Mounting Type, Number of Input Channels, Operating Temperature Range, Package.
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストADS7817PB 最大定格&電気的特性
| Converter Type | 12-bit sampling analog-to-digital converter |
| Architecture | SAR |
| 分解能 | 12 bit |
| サンプリングレート | 200 kSPS |
| Input Type | Fully differential analog input |
| Number of Input Channels | 1 channel |
| Reference Voltage Range | 100 mV to 2.5 V |
| Input-Referred Resolution | 49 µV to 1.22 mV |
| 電源電圧 | 5 V |
| Linearity Error | 0.0488% |
| Output Interface | Serial |
| Power-Down Feature | Automatic power down |
| 動作温度範囲 | -40 °C to +85 °C |
| パッケージ | 8-pin plastic mini-DIP |
| 実装タイプ | Through-hole |
| Product Type | Micro-power differential sampling ADC |
| RoHS ステータス | unknown |
| REACH Status | unknown |
ADS7817PB 8-pin plastic mini-dip ピン配置ガイド
ADS7817PB (8-pin plastic mini-dip パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: ADS7817PB.
詳細は データシート をご参照ください。
主な用途
ADS7817PB の用途: 6 件s: Bridge Sensor Acquisition, Battery-Powered Instrument, Remote Sensor Node, Industrial Process Measurement, Multichannel Measurement Board, Laboratory Data Logger.
Bridge Sensor Acquisition
The ADS7817PB fits bridge-transducer front ends because its fully differential input measures the small voltage developed across the sensing element without requiring either sensor terminal to be tied directly to ground. The 12-bit converter provides 4,096 digital levels, while the adjustable 100 mV to 2.5 V reference permits the input range to be matched to the transducer output. At 200 kSPS, the converter also handles rapidly changing pressure, strain, or force signals. Keep the analog path short and balanced, place reference decoupling at the device, and verify common-mode headroom against the official electrical limits.
おすすめ
Battery-Powered Instrument
The ADS7817PB is appropriate for portable instruments because the 5 V converter combines low-power operation with automatic power-down. A designer can enable acquisition only while a measurement is required, reducing standby consumption in the surrounding system. The 200 kSPS rate supports rapid sensor sampling, and the 12-bit output is useful for process variables, battery voltage, or environmental readings. Power sequencing, analog settling, and reference current should be evaluated together because converter resolution alone does not determine battery life. The 8-pin mini-DIP package also simplifies through-hole prototyping and repair.
おすすめ
Remote Sensor Node
The ADS7817PB supports remote acquisition nodes that digitize low-level differential sensor outputs before transmission or local processing. Its 12-bit resolution and sampling rate of 200 kSPS provide adequate throughput for many pressure, temperature, and position sensors. Differential signaling helps preserve the useful sensor voltage when common-mode noise is present, although input filtering and source impedance must still be engineered correctly. Automatic power-down is valuable when the node wakes periodically. Use short analog traces, a stable reference arrangement, and grounding that minimizes return-path coupling between the converter and digital circuitry.
おすすめ
Industrial Process Measurement
The ADS7817PB is suitable for industrial process measurement when the sensor produces a differential signal in the range established by the selected reference. Its 12-bit conversion resolution, 0.0488% stated linearity error, and 200 kSPS sampling rate provide a practical combination for monitoring valves, heaters, pressure lines, and analog control signals. The -40 °C to +85 °C operating range supports industrial equipment when the complete assembly is thermally qualified. Designers should add appropriate input protection, isolation, filtering, and calibration while observing the common-mode and absolute-maximum limits in the manufacturer documentation.
おすすめ
Multichannel Measurement Board
The ADS7817PB can form one channel of a multichannel measurement board using analog multiplexing ahead of the converter. Its 200 kSPS rate allows each selected channel to be sampled within the required system timing, while the differential input supports balanced sensor connections. Because the converter has one input channel, the mux settling time and source impedance directly affect conversion accuracy. Select an external reference and capacitor network that preserve performance across the scanned range, and include calibration paths where gain or offset compensation is required. The 8-pin mini-DIP package keeps through-hole channel boards compact.
おすすめ
Laboratory Data Logger
The ADS7817PB is useful in laboratory data loggers that need accurate digitizing of differential test signals with modest channel count. The 12-bit resolution supports common automation and measurement tasks, and the 200 kSPS rate is sufficient for many sensor waveforms. The adjustable reference from 100 mV to 2.5 V allows the designer to tailor the conversion range to the signal under test rather than use the full reference unnecessarily. For laboratory use, provide stable reference decoupling, controlled analog grounding, and calibration routines. Confirm that the selected input range and acquisition bandwidth satisfy the test specification.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADS7817PB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 8-pin plastic mini-DIP |
| Brand | Texas Instruments |
| Resolution | 12 bit |
| Sampling Rate | 200 kSPS |
| Input Configuration | Fully differential, 1 channel |
| Reference Voltage Range | 100 mV to 2.5 V |
| Input-Referred Resolution | 49 µV to 1.22 mV |
| Supply Voltage | 5 V |
| Linearity Error | 0.0488% |
| Operating Temperature Range | -40 °C to +85 °C |
設計ノート
Keep the analog input traces short, symmetric, and away from switching nodes and digital clock lines. Place the device's supply and reference bypass capacitors close to their respective pins, with the ground return arranged to minimize shared impedance with sensitive input currents. The differential input architecture reduces common-mode pickup, but it cannot compensate for an unbalanced or poorly grounded analog layout.
Use the manufacturer input-capacitance and settling guidance when selecting the series resistance and capacitor value ahead of each analog input. When an analog multiplexer precedes the ADC, allow sufficient acquisition time for the multiplexer output, sampling capacitor, and external source impedance to settle. Insufficient acquisition time can appear as channel-dependent gain error even when the converter itself operates at 200 kSPS.
Treat the 5 V supply and reference network as part of the measurement accuracy path. Decouple the supply at the device and follow the manufacturer reference layout with short, low-inductance connections. If automatic power-down is used, verify that the reference settles before conversion and that control timing meets the required acquisition schedule. Recheck rail sequencing whenever the ADC and analog source do not share a common startup order.
Do not treat a related ADC with a similar resolution or sampling rate as a drop-in replacement without comparing package, pin assignment, reference range, serial protocol, timing, and input common-mode limits. The ADS7817PB target order code specifically uses an 8-pin plastic mini-DIP package. A surface-mount alternative may require a different footprint and therefore a PCB redesign even if its conversion specifications appear comparable.
コンプライアンス情報
The available product information does not explicitly establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this product.